Losing midi information at the spli

I am trying to split my real instrument track, but am losing a measure worth of midi information at the split point... does anybody know the reason for this?

you're going to have to explain what you're doing in more detail, there is no MIDI information on a "real" track

Similar Messages

  • Losing midi information when splitting tracks

    is anyone having issues with Garageband cutting out MIDI informatino when you are trying to split the track?

    It usually happens, If I am cutting the track right through a long note. Then the note usually will be clipped or deleted and not split.
    Like in the screenshot below: After splitting the Cello Track, the right part of the long notes is missing. If I need the notes to continue I copy them in the Track editor to the position after the split and adjust the length and velocity.
    In which situations does it happen to you?

  • I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

    I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows.  I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
    I am worried that  may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

    Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
    If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
    The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
    You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

  • I have an iPad and and iPhone. They share an iCloud and I want separate iCloud accounts. How do I create a new account without losing any information? I want to keep the original account on one device.

    I have an iPad and an iPhone that share an iCloud account. I didn't realize when I got my iPad last year that when I signed up the iCloud on the device that it would share and use 5g of iCloud between the both of them. How do I unsync them and have two separate iCloud accounts? I don't care about sharing between them. When my kids put games on my iPad, I don't want them going on my phone. How do I create a new iCloud without losing any info on the other device?

    Hi sugaliko,
    You may need to set up your BlueTooth connection to the keyboard again. Use the steps in this article for guidance -
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/HT1664
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My husband and I share an apple id. How do we seperate them withou losing anything to use the Family Sharing?

    Using iPhone 4S, iOS 8
    When we first got our iphones we set up to share our iTunes account so we only had to buy an app once.  Now with Family Sharing we want to separate into our own apple IDs.  We plan to get new iPhone 6 s soon and want to back up what we can to the iCloud to make it easier.  What is the best way to do this without losing any info?  I want to keep my apple ID and create a new one for my husband.

    Hi Christy,
    Welcome to Apple Support Communities.
    Family Sharing will make it easy for you to setup a new Apple ID for your husband, while allowing purchases to be shared between accounts. Take a look at the article below for information about the Family Sharing features and how to set it up.
    Family Sharing
    Cheers!
    -Jason

  • Logic Pro 9 randomly displaces midi information within a region.

    Hey guys, hoping for some help here.
    I have Logic Pro 9 and have been working with it for about two years now. For the past couple of months a really strange thing has been happening with midi information that is displayed in the region boxes. I do not play a midi instrument therefore I program it all in by hand and from time to time when I loop a region during playback the midi notes are transposed up and down at random intervals. The only solution that I have found has been to copy and paste individual regions, then go in and correct all the displaced notes. This is really time consuming. I have tried searching for a solution but this particular problem doesn't seem to pop up anywhere  .
    Has this happened with anyone else? Does anyone have any idea what might be causing this to happen, and if so how can I fix it? Maybe I pressed a button somewhere lol.
    Thanks for listening! 

    Check either your Chord Track or your Transposition track.
    http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=4%26sec tion=12%26tasks=true

  • Where is the best place to get/read information of the pros and cons on updating my OS from Snow Leopard to the current OS?

    Where is the best place to get/read information on the pros and cons of updating my OS from Snow Leopard to the current OS?
    I have an iMac 27" intel, purchased Nov 2009.  I am currently using 10.6.8

    Apple OS 10.9 Mavericks:
    Quick overview:
    https://help.apple.com/osx-mavericks/whats-new-from-mountain-lion
    OS X Mavericks supports the following Macs that are already running a minimum of Snow Leopard:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    Transitioning your Mac from Mountain Lion to Apple's new OS X 10.9 Mavericks
    http://appleinsider.com/articles/13/10/23/transitioning-your-mac-from-mountain-l ion-to-apples-new-os-x-109-mavericks

  • Is it possible to read information off the desktop and send it to java ?

    Hello. I am wondering if it's possible with Java to read information off the
    screen and send it to a java listener to be interpreted.
    information such as comparable images (ie images that you can match with an
    image you already posess in order to classify it) or simply text.. or colors
    ie could I say for exemple be "listening" at a certain coordinate say 560x76
    0 and whenever that pixel turns a certain color than that activates a functi
    on and sends it the color data.
    or I could be listening for any changes in a small box and whenever that are
    a changes it copy/pastes its contents to be interpreted or compared
    I know this is all pretty advanced.. and obviously it can be done but perhap
    s not with java but I'm hoping someone knows if it can and could give me a p
    ointer like a link so I can read up on it and learn how to do it.
    thanks for you help in any case

    have you considered that perhaps the casino enjoys the fact you have to make a small deposit before you can use one of these companies they have a deal with ?
    hey is it so hard to believe that perhaps the casinos were the ones that came up with the idea in the first place and launched the first calculator products (discreetly of course).
    casinos want to teach you to become a better player every way they can.. no matter how you look at it this always results in more profit for them
    the calculators available right now are either bought for 40-60$ a piece or require that you specifically make a FIRST real cash deposit at one of the sponsored casinos. IE if you're already a real cash player at one of the casinos then the offer doesn't work, you need to sign-up elsewhere and deposit.
    what do deals like that result in on a weekly, monthly and annual basis? millions of dollars through new sign-ups that otherwise would not of been. regulars of one site may become regulars of another site because they were coerced in having to deposit AND play 500 real-money hands in order to fully unlock their calculator's "free license",
    I'd be willing to be that 95% of the time players end up blowing away their "first deposit" waaaaaaaaaaay before they reach the 500 real money hands (heck I made it to 200 hands with my 50$ and I'm sure most don't make it to 50!). So on average it means that for each new calculator user the casinos make a minimum of 100$ and probably much much more.
    if you don't see the marketing catch in it then you're just not looking at it through the money-hungry glasses everyone in the gambling industry wears today
    it's fact that they directly profit from this.. as well as all the other poker advertising and propaganda that we're flooded with today.
    to answer your question now.. well.. if it were that easy then they and their business partners would be losing millions anually over the lost opportunity

  • I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

    I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

    Hi,
    that's because Logic reads the volume information out of the imported MIDI tracks and sets the volume fader according to this information. The MIDI information overrides volume settings you have done, so you have to identify the MIDI events that contain volume (or expression or pan or whatever) information and delete them. You can use the event list editor for this.
    Fox

  • I have recently been asked to research information for the following.

    I have recently been asked to research information for the following.
    Add a backend SQL server to the current Access 2010 set up we have in place as the front end, for 11 users.
    Upgrade to Access 2013 which I understand includes the SQL at no additional charge.
    I am looking for pro vs cons between the two options. 

    Hello,
    Your number 1 option was called “Upsizing an Access Database to SQL Server”
     and keeps the front-end on the Access side. The issue here is that the upsizing process was not always an easy one: you may find some issues with the way SQL handles dates and the way VBA generates those dates; VBA handles strings with double quotes
    while T-SQL uses single quotes; VBA functions like Date() and Now() should be replaces by T-SQL functions like CONVERT/CAST and GETDATE; InStr and Mid functions should be replaced by Substring function on T-SQL; the IIF function should be replaced by the CASE
    statement (T-SQL); need to convert Access table constrains to SQL Server constraints; etc.
    Now with Access 2013 (Option 2), you don’t have to think about the above upsizing process anymore, since that old access project/linked server functionalities are
    replaced by natively use SQL Server databases. That means no more 2 GB limit for Access databases.
    Now Access 2013 makes available the possibility to use SQL Server Reporting Services for reporting and opens the gateway to SQL Azure.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Losing midi connection from PC2 controller

    Logic is constantly losing midi connection with my MTP AV. Logic 9.0.2 OSX 10.6.8.... I have updated motu drivers, replaced usb cable to MTP, tried
    different usb inputs to MacPro. I can see midi getting to the MTP but logic doesn't see it after midi dropout. Problem can be fixed by resetting midi
    devices but irritating to have to do it every five minutes. Anyone else having this problem?
    Thanks for any help.

    I have a similar problem.
    I am sending midi from macbookpro (10.6.8), via motu828, to an iMac (10.6.8) via a midisport.
    The midisport always sees the midi input data, but I regularly loose the data within the iMac.
    Rescanning the MIDI system reconnects to the incoming midi data but this it troublesome when performing.

  • Is it possible to break an edit into small scenes, and then sew them together, but without losing quality by using the 'publish and share' options?

    Is it possible to break an edit into small scenes, and then sew them together, but without losing quality by using the 'publish and share' options?

    redflashred
    What is important here is that you know the properties of your source file(s), set the project preset to match the properties of those source files, and then export with settings as close as possible to the original. Often you can do this without noticing quality differences in the export.
    I am understanding and defining your issue as you wanting to maintain the quality of the original imported files in the export. If that is the case, the please supply the following, and I will give you a step by step
    a. What are the properties of your source files (including bitrate). Here I am looking for
    video compression
    audio compression
    frame size
    frame rate
    interlaced or progressive
    pixel aspect ratio
    file extension
    A quick way to get that type of information is knowing the brand/model/settings for the camera that recorded the video.
    2. Based on that information we can set manually a project preset to match those source property.
    3. When we go to export...example Publish+Share/Computer/ and your choice and its preset, we can customize the preset selected
    under the Advanced Button/Video Tab and Audio Tab of that preset in order to try for the best possible match between the properties of the
    original file and the properties of the export.
    But, please let us know if you also need help in trimming the original import at the Timeline level prior to export.
    Your mention of Publish+Share suggest that you are working with Premiere Elements 11, 12, or 13. What is the computer operating system?
    Thanks.
    ATR

  • Recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

    recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

    Are you sure? I restored my new iPod from the backup of my iPad and all app data was restored to the new iPod..  App data is part of the backup.
    iPhone and iPod touch: About backups

  • Updating i phone 5 without losing contact information

    Any suggestions for updating an i phone 5 without losing contact information?  My phone has been "acting up" and I figured maybe it's time to update it.  The last time I updated it, I lost about 1/3 of my contact information.  Any tips?

    Only if you first make a backup of your phone. Updating iOS will erase everything from the device. Perhaps you should think about using Contacts on your computer to store the information you sync to the phone. Then you won't lose it. Also, think "backup."

  • Why do my songs skip to the next song mid way through the song?

    why do my songs skip to the next song mid way through the song?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Maybe you are looking for