Losing my Audio Midi Network Connection with iPad

I have been trying to set up my iPad to connect to my Macbook Air over a computer-to-computer network to run a midi remote app called Midi Designer with Mainstage 2. The connection will work for a few minutes, but if there is no signal sent from the iPad for a minute then the connection is lost. I have my iPad set to never sleep, as well as my computer. Are there any other settings I need to change to keep the network active over longer periods of time?

I am having almost the same issue excpet my connection is lost within less than a minute. Have you had success since your post? If anyone has any suggestions, please do post!

Similar Messages

  • How to make the wifi connection with Ipad in china since it requires user's name and password.

    How to make the wifi connection with Ipad in china since it requires user's name and password just like the dialed-up?

    The same way you would connect to a secure wifi network in any other country. Supply the username and password when prompted.

  • Sharing a network connection with an Ipad2

    I have a windows desktop connected to a network. I'd like to share the network connection with my Ipad while it is connected via the USB cable to the desktop. Is this possible? How?
    Thanks,
    Shaun

    Well duh - no. I misread the question. I share the Internet connection from my iMac which is connected to the Internet via Ethernet cable to the modem.
    The iPad shares my iMac's Internet connection through internet sharing. The iPad is not connected to my Mac with the USB cable. Brain clot! But is it not possible to share the connection via Internet sharing in the Windows world?
    Sorry to the OP!

  • Can't open app store in itunes when connected with ipad

    Hi. Could anybody tell me how I can use app store in itunes when connected with ipad 2? When I click app store, it just gives no response at all. Thanks a lot!

    Welcome to the Apple Community.
    Do you have the power cable in, it won't show up with the power cable in.
    Additionally, there have been some issues with the update servers, it's possible you won't be able to complete the update procedure anyway.

  • I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone.  What the...?

    I can connect to iTunes on apple TV, but get "invalid I.d. Or password" message when trying to connect with iPad or iPhone.  What the...?

    Hi Boscoboi,
    Welcome to the Support Communities!
    You may need to check the settings for your iTunes Store on the iPad and iPhone.
    Sign out of the iTunes account, restart the device and sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311?viewlocale=en_US
    If these basic steps don't resolve your issue, then follow the advice in this article for connectivity issues with iTunes:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    - Judy

  • What audio/midi interface works with new iMac 2014

    What audio/midi interface works with new iMac 2014. new imac only has USB3 and Thunderbolt.

    Thanks for the info.
    I have two MOTU 8pre's would these work with the Thunderbolt to Firewire adaptor?

  • Audio/MIDI Interface Compatibility with Logic Pro 7.2

    Hello,
    Is/are there a recommended audio/midi interface(s) that will work without audio/midi timing glitches with Logic Pro 7.2? Currently, I am using Pro Tools LE v7.1, along with the DIGI002 Rack. That combination works very well, with no glitches whatsover. The possibility of using Logic Pro 7.2 raises the question of what would be a compatible interface. I don't think the DIGI002 Rack has the necessary drivers, although I may be mistaken. However, there must be an interface that works well with Logic Pro 7.2.
    Any help or advice would be much appreciated.
    Thank you,
    TonyVT
    iMac Intel Dual Core   Mac OS X (10.4.6)  

    Hello,
    I went to the Metric Halo Web site and was not able to find the interface that you may have been referring to. It looks like the Mobile I/O may be the correct one, however, that interface is much more than I would want to spend (http://www.mhlabs.com/metric_halo/products/mio/)
    The price seems to be @ $1200. Anyway, I am somewhat confused regarding the Metric Halo.
    Any additional advice/help would be appreciated.
    Thank you,
    Tony Ventura
    www.tonyventura.com
    iMac Intel Dual Core   Mac OS X (10.4.6)  

  • HT4623 How to use epson iprint after connected with iPad help

    How to use epson iprint after connected with iPad help.

    When you open Epson iPrint, you will see the various options of ways to proceed, e.g., Photos (to print photos), Maintenance (for printer maintenance). Scan (to perform scanning).

  • Osx 10.4.11 can't connect with ipad mini

    i'm using old Mac os 10.4.11,  is it possible to connect with ipad mini ... which version of the itunes requested at least .... seems i cannot update itunes to the latest version  ... please help if anyyone get any idea ..thanks

    As stated in the iPad mini system requirements (on the box and Apple website), you need a Mac running Mac OS X 10.6.8 or later to use the iPad mini with it:
    http://www.apple.com/ipad-mini/specs/
    Time to buy a new Mac.

  • Is there a way to have automatic MIDI network connections?

    I have an environment where I'm using an iPad with my own software to connect to a Mac and send MIDI data to it from time to time. I've used the Audio MIDI Setup app to configure the "Network MIDI" and it works fine, detecting my running iPad MIDI app. However, if I close my iPad app and reopen it even just a minute later, the Network MIDI connection is gone and I have to reopen Audio MIDI setup to restablish a connection.
    I'd like for this to happen automatically if that's possible.
    Thanks,
    David

    I have an environment where I'm using an iPad with my own software to connect to a Mac and send MIDI data to it from time to time. I've used the Audio MIDI Setup app to configure the "Network MIDI" and it works fine, detecting my running iPad MIDI app. However, if I close my iPad app and reopen it even just a minute later, the Network MIDI connection is gone and I have to reopen Audio MIDI setup to restablish a connection.
    I'd like for this to happen automatically if that's possible.
    Thanks,
    David

  • Audio midi network setup wrong interface

    I am having difficulty establishing a wireless MIDI connection between my Macbook Pro (10.8) and my iPad.
    When I open the Audio MIDI setup application and go to MIDI Studio and click Network, it detects my iPad, and I can supposedly connect to it, but nothing works. I look at the address which says:
    host-12:5006
    10.211.55.2:5006
    10.37.129.2:5006
    However, both devices are on a network starting with 128.237....
    When I run ipconfig, i see that these two adresses are coming from vnic0 and vnic1 which I traced back to Parallels.app--they are virtual interface devices for running windows, etc.
    Basically, I get the feeling that Audio MIDI setup.app isn't getting the right ip addresses to function. 
    Or am I completely misunderstanding something here?
    Thanks

    You can disable all the Parallels services temporarily by typing the following in Utilities/Terminal.app. It will ask for the root password.
      sudo launchctl stop com.parallels.desktop.launchdaemon
    To enable it again, enter:
      sudo launchctl start com.parallels.desktop.launchdaemon
    The background services must be running for Parallels to run so remember they are back on when you're done with your audio session.

  • Premiere Pro 2014 and MIDI Network Connections

    I was thrilled to see that Premiere Pro introduced control surface connections a while back, but I was curious to know if there was any way to enable it to accept connections to wireless surfaces, iPads, etc. I can do it easily with Audition via Network Connection 1 and the Mackie protocol, but was curious to know if it's possible to make that kind of connection with Premiere Pro.
    Thanks!
    Nic Petersen

    Same thing here.  See this post I made prior to seeing yours:
    Output Mapping Preference for 5.1 Audio

  • No network connection with facetime

    No network connection after logging in to facetime

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Audio/midi interface compatibility with Logic Express Mac osx 10.6.5

    hi all, I'm looking for a compatible audio/midi interface to use with the latest mac os. I recently purchased a Ediroll UA25 but was unable to get it working . I installed the latest drivers from the Roland site but when plugged in it just wasn't being recognised. I sent it back and got a full refund but now I am insure if the Ediroll was faulty or if it wasn't compatible with os 10.6.5. I am now in the process of looking to purchase another interface but am looking for help from you guys.
    Thanks in advance,
    kiev

    Hi,
    just out of curiousity: did you use the UA-25 or the UA-25EX? I know the 25EX has a driver switch on it's back where you can enable a standard driver which should be compatible to OS X without an additional driver.
    However, i didn't find another interface including a compressor except for the Yamaha Audiogram 6, if you need this feature.
    If you don't need it, buy a MOTU, preferably with firewire, or a Presonus. If you want quality, maybe an Apogee Duet. I myself - due to shortage of funds - still use either my Tascam Fireone or my Alesis I/O 2. The Alesis sounds nice for it's price, but i won't buy any of these lower end interfaces anymore. You get what you pay for. I also used the Edirol UA-25EX for a time, but this was before snow leopard, so i can't really say "Yes or No", but it was definitely a very good interface compared to it's price. I won't recommend M-Audio, however, but others like it.
    Fox

  • Why do does Bluetooth connection fade in and out on my iPod? No issues connecting with iPad.

    Bluetooth stereo headphones lose connection with iPod but not iPad, any suggestions?

    Likely just interference from other sources that use the 2.4 GHz band..
    AirPort and Bluetooth: Potential sources of wireless interference

Maybe you are looking for

  • Urgent:Problems with regestration in WebMail!!!!!!!!

    After registration user want to change own password,how it can be realize with JSP.I think we must adjust qMail.(I do my last year work -WebMail Application) Please,I need your help........ You can write your suggestions to my mail [email protected]

  • The new apps pages, numbers, and keynote

    I have the iPad 3rd generation. Can I download the new built n apps that where installed on the new iPad to my 3rd generation ipadfor free?

  • HiWhat happend inside SCC modules (eg. SCC AI07)

    Hi, I'm using some of the SCC modules (SCC AI07) which includes inside the SC-2345 connector box. This modules has -+50mv input range, -+10v output range, and gain of 200. Then, I want to know the operation inside the modules after giving any input s

  • Is it possible to export my entire library of photos onto an external hard drive?

    Hi everyone, So, if I'm interested in making a copy of images only (nothing else, no face recognition data or anything like that) onto an external hard drive, would the best way of doing this be to select all the photos, then go to File -> Export and

  • All Menus in Firefox Display Incorrectly

    Every menu in Firefox displays incorrectly. All menus appear to be the entire Firefox window shrunk down into the bounds of the menu. I can even see part of the menu in the stretched version. I'm running Windows 7 Home Premium 64-Bit and I've reinsta