Losing one feature after another.......

First I can't access Gmail,
then my phone will not ring when calls come in, only vibrate,
now I can't access photos in my Gallery. Screen goes blank.....
I really regret getting the Droid X this soon. Should have waited until they got all the "kinks" out; this is getting pretty ridiculous.

I'm sorry to hear you are experiencing trouble with your new Droid X. I would suggest to perform a hard reset to your device. Please keep in mind that performing a hard reset will remove ALL data including the Google account, system data, application data, application settings, and downloaded applications. Follow the steps below to perform the reset.
From the home screen, touch the applications tab (located at the bottom of the display).
Touch Settings.
Touch Privacy.
Touch Factory Data Reset.
Touch Reset Phone. If presented, enter the current passcode or draw the unlock pattern.
Touch Erase Everything.
Once you perform the hard reset, it will reset your device back to the factory settings.
Hope this helps!

Similar Messages

How do i get music videos to play like the music does on my ipad, for example one right after another and shuffle

I need to know how I can get the music videos on my IPad to play like the music does. What I mean id setting up a playlist, shuffle, and have them play one right after another instead of going back to the main screen.

At the top of the playlist where it shows the playlist title and the number of songs, there are two icons. Click the "play" triangle to add the entire playlist to "Up Next", or the "shuffle" symbol to do the same thing but in random order. But the currently playing track will stop playing, and all the songs in "Up Next" will be removed (replaced by the ones from this playlist).
If you hold down the "option" key while clicking those icons, the currently playing song will continue playing, and the new playlist will be added to "Up Next" (above the songs that were already there).

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

I created a playlist with 100 songs. I want those 100 songs played using the shuffle option. This no longer works in iTunes version 11.1.5.5 How can I get an entire playlist to paly one song after another by using the switch option?

You're welcome.
Going back to your original post:
5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
tt2

My iPad air won't charge at all and I don't know if it's the charger or port help!i have had a new port put in before and it worked fine after but it's not working now! I have spent way to much trying to fix this thing one problem after another?

My iPad air won't change at all, and I don't know if it's the port or charger cable it is charging normally but it just won't charge. I have had a new port put in before after a charger getting stuck in there but it worked fine after and now it's not working at all! I don't know if maybe it's the charger getting old but I have spent far too much money on this iPad then I should have as it's one problem after another witch is causing me lots of stress.

Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
How are you charging it? its's best charged plugged into the wall not via USB. So if you're trying via USB, try using the supplied power block plugged into the wall.

Embed question - play one movie after another

I am trying to figure out how to play a short 10 second clip before each movie on my website. The clip may be a short ad or a promo and will depend upon the content of the main video. What is the code that enables you to play one move after another in a web page. I don't want to edit the two clips to become one cos over time the ads and promos will change. In Realplayer I remember using SMIL but how is it done in QT. I will eventually write code to write out the Embed tag but now i am just experimenting. Here is what my drupal site puts out



<object type="video/quicktime" width="483" height="381"
data="http://www.1234567.com/files/videos/Mpeg4TestSnapX-480x360.mp4">


<param name="src" value="http://www.1234567.com/files/videos/Mpeg4TestSnapX-480x360.mp4" />
<param name="AUTOPLAY" value="true" />
<param name="KIOSKMODE" value="false" />
Your browser is not able to display this multimedia content.
</object>
Problems viewing videos?
Download latest Quicktime Player

Embed the initial movie clip as normal, but give it an HREF property.
Set the source for the HREF to be the next movie, set autohref=true, and set target="myself". It's the same technique you use to build a poster movie but (a) instead of having the poster movie open QT Player, you have its target open in its own frame and (b) instead of waiting for a user to click the poster, you have the poster movie "click itself".
Code that I used a very long time ago to display a "Loading..." graphic as a movie loaded (waste of effort, actually, as the movie is fast start and loads very fast):
<embed
src="loading.mov"
height="208"
width="256"
autohref="true"
href="Worm.mov"
target="Myself">
</embed>
(of course this was before I learned about OBJECT and the need to use OBJECT to activate the ActiveX control in IE. Also, it's worth noting that the javascript hack isn't strictly necessary for IE users, but without it, IE users will get a security dialog before they get the movie.)
The code above can be found on:
http://capital2.capital.edu/admin-staff/dalthoff/adventures/worm.html
--Dave Althoff, Jr.

ITunes won't play one song after another automatically.

I have an iMac . iTunes has always played one selection after another automatically, and I am not talking about shuffle. I downloaded an audio book (Mp3 files) which loaded into music, but I have to choose each segment manually, it won't play one segment sequentially automatically.

Are the selections un-checked? Items that are not checked will not automatically play. If they are checked, go into Get Info and see if you have the "Skip when shuffling" option set -- if it is, and if you happen to have Shuffle turned on, they won't play.

Help!! As I was scrolling through my library, one folder after another had the photos in it turn to "static"! Lots of streaks and dots! What is happening and how do I save my photos?

As I was scrolling through my Aperture library just now, I saw one folder after another turn the photos in that folder into garbage! They have lines and dots and nothing recognizable - what in the world is causing this? Can I get my photos back? It almost looks like a virus eating my files - could it be - and if it is - is my entire computer in trouble? HELP HELP HELP!

Interesting that you posted this Cleaning up photo library about one hour before this post. I'd say there is a good possibility they are related.
Without knowing your system, OS version and Aperture version and what you were doing to 'clean up' your library there is little we can do.
My photo library is a mess. I have moved things around a lot in a futile attempt to organize them, now I have a lot of placeholders with no files attached. How do I clean things up?
I suggest you restore from your backup and forgo the cleaning operation until you have a better grasp of the situation.
BTW the Masters folder is organized by date and time of import at least in Aperture 3, if you are using 2 then all bets are off,
Good luck with Apple support, if you want to try and get this sorted out post back the information I requested above.
regards

HT201365 i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

i forgot my pass code my home button doesnt work i cant restore because find my phone is on im frustrated and out of solutions my home button just stopped working today and it has just been one issue after another this morning help help help

If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808

How do I play one podcast after another?

Hello,
I have iTunes 7.0.2 and I can't figure out how to play podcasts one after another ... like, when one podcast is done, to go on to play the next one. Any ideas?

I think you can create a podcast playlist then drag episodes to it, and arrange them in the order you want to listen.
Hope that helps.

Load one swf after another?

Hey!
I've created a presentation in Flash that exceeds the maximum number of frames. I broke it up into a few different files, and now I need these .swfs to load one after another automatically, without prompting or clicking anything on the screen.
The presentation is for an interpretation program at work and will be played for an audience several times a day. It was originally a 6-slide-projector presentation that I simplified, and this is the last step to replacing the old projection system altogether.
Does anyone know how to solve my problem, as simply as possible?
Thank you!

you'll probably want to load them all at the start of you presentation so they're ready for display without waiting.
so, use standard preloader code to load your swfs. use a loop or dispatch an event to detect when one ends and another needs to start.

How do I get my iphone to play all my music one song after another ?

Hi
I cannot get all my music to play one one after another like on my Ipod ?
I have to choose and satrt each song ?
Can anyone help ?

If you don't have the prior computer backup files, you may want to look at this to get your information from the phone:
http://www.wideanglesoftware.com/touchcopy/index.php

Start one job after another complets using PL/SQL procedure and DBMS_JOB

All,
I am attempting to refresh a materialized view using DBMS_JOB and having a PL/SQL program loop through each materialized view name that resides in a table I created. We do the table because they have to be refreshed in a specific order and I utilize the ORDER_OF_REFRESH column to dictate which MV comes first, second, third, etc.
Now - I have this working to the extent that it kicks off 4 materialized views (currently set the procedure to only do 4 MVs for testing purposes) but I would ultimately like the procedure to create a new DBMS_JOB that calls DBMS_MVIEW.REFRESH of the next view in line ONLY after the preceeding materialized view DBMS_JOB completes.
The purpose of all of this is to do a few things. One - if I simply create a procedure with the DBMS_MVIEW.REFRESH call to each materialized view in order - that works but if one fails, the job starts over again and will up to 16 times - BIG PROBLEM. Secondly, we want the job that will call this procedure to fail if it encounters 2 failures on any one materialized view (because some MVs may be dependant upon that data and cannot use old stale data).
This may not be the "best" approach but I am trying to make the job self-sufficient in that it knows when to fail or not, and doesn't kick off the materialized views jobs all at once (remember - they need to start one after the other - in order).
As you can see near the bottom, my logic doesn't work quite right. It kicks off all four jobs at once with the date of the whatever LAST_REFRESH is in my cursor (which ultimately is from the prior day. What I would like to happen is this:
1.) 1st MV kicks off as DBMS_JOB and completes
2.) 2nd MV kicks off with a start time of 3 seconds after the completion of 1st MV (based off LAST_REFRESH) date.
3.) This conitnues until all MVs are refresh or until 2 failures are encountered, in which no more jobs are scheduled.
- Obviously I am having a little bit of trouble with #2 and #3 - any help is appreciated.
CREATE OR REPLACE PROCEDURE Next_Job_Refresh_Test2 IS
V_FAILURES NUMBER;
V_JOB_NO NUMBER;
V_START_DATE DATE := SYSDATE;
V_NEXT_DATE DATE;
V_NAME VARCHAR2(30);
V_DELIMITER VARCHAR2(1);
CURSOR MV_LIST IS SELECT DISTINCT A.ORDER_OF_REFRESH,
                              A.MV_OBJECT_NAME
                    FROM CATEBS.DISCO_MV_REFRESH_ORDER A
                    WHERE A.ORDER_OF_REFRESH < 5
               ORDER BY A.ORDER_OF_REFRESH ASC;
CURSOR MV_ORDER IS SELECT B.ORDER_OF_REFRESH,
                              B.MV_OBJECT_NAME,
                              A.LAST_REFRESH
                         FROM USER_SNAPSHOTS A,
                              DISCO_MV_REFRESH_ORDER B
                         WHERE A.NAME = B.MV_OBJECT_NAME
                    ORDER BY B.ORDER_OF_REFRESH ASC;
BEGIN
FOR I IN MV_LIST
LOOP
IF I.ORDER_OF_REFRESH = 1
THEN V_START_DATE := SYSDATE + (30/86400); -- Start job one minute after execution time
          ELSE V_START_DATE := V_NEXT_DATE;
END IF;
     V_FAILURES := 0;
     V_JOB_NO := 0;
     V_NAME := I.MV_OBJECT_NAME;
     V_DELIMITER := '''';
DBMS_JOB.SUBMIT(V_JOB_NO,'DBMS_MVIEW.REFRESH(' || V_DELIMITER || V_NAME || V_DELIMITER || ');',V_START_DATE,NULL);
          SELECT JOB, FAILURES INTO V_JOB_NO, V_FAILURES
          FROM USER_JOBS
          WHERE WHAT LIKE '%' || V_NAME || '%'
          AND SCHEMA_USER = 'CATEBS';
IF V_FAILURES = 3
THEN DBMS_JOB.BROKEN(V_JOB_NO,TRUE,NULL); EXIT;
END IF;
FOR O IN MV_ORDER
LOOP
IF I.ORDER_OF_REFRESH > 2
THEN V_NEXT_DATE:= (O.LAST_REFRESH + (3/86400)); -- Start next materialized view 3 seconds after completion of prior refresh
END IF;
END LOOP;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND
     THEN
          IF MV_LIST%ISOPEN
               THEN CLOSE MV_LIST;
          END IF;
NULL;
END Next_Job_Refresh_Test2;
---------------------------------------------------------------------------------------------------------------------

Justin,
I think I am getting closer. I have a procedure shown just below this that updates my custom table with information from USER_SNAPSHOTS to reflect the time and status of the refresh completion:
CREATE OR REPLACE PROCEDURE Upd_Disco_Mv_Refresh_Order_Tbl IS
V_STATUS VARCHAR2(7);
V_LAST_REFRESH DATE;
V_MV_NAME VARCHAR2(30);
CURSOR MV_LIST IS SELECT DISTINCT NAME, LAST_REFRESH, STATUS
                         FROM USER_SNAPSHOTS
                    WHERE OWNER = 'CATEBS';
BEGIN
FOR I IN MV_LIST
LOOP
     V_STATUS := I.STATUS;
     V_LAST_REFRESH := I.LAST_REFRESH;
     V_MV_NAME := I.NAME;
UPDATE DISCO_MV_REFRESH_ORDER A SET A.LAST_REFRESH = V_LAST_REFRESH
WHERE A.MV_OBJECT_NAME = V_MV_NAME;
COMMIT;
UPDATE DISCO_MV_REFRESH_ORDER A SET A.REFRESH_STATUS = V_STATUS
WHERE A.MV_OBJECT_NAME = V_MV_NAME;
COMMIT;
END LOOP;
END Upd_Disco_Mv_Refresh_Order_Tbl;
Next, I have a "new" procedure that does the job creation and refresh show just below this which, when starting the loop, sets the LAST_REFRESH date in my table to NULL and the STATUS = 'INVALID'. Then if the order of refresh = 1 then it uses SYSDATE to submit the job and start right away, else if it's not the first job, it uses V_NEXT_DATE. Now, V_NEXT_DATE is equal to the LAST_REFRESH date from my table when the view has completed and the V_PREV_STATUS = 'VALID'. I think tack on 2 seconds to that to begin my next job.... See code below:
CREATE OR REPLACE PROCEDURE Disco_Mv_Refresh IS
V_FAILURES NUMBER;
V_JOB_NO NUMBER;
V_START_DATE DATE := SYSDATE;
V_NEXT_DATE DATE;
V_NAME VARCHAR2(30);
V_PREV_STATUS VARCHAR2(7);
CURSOR MV_LIST IS SELECT DISTINCT A.ORDER_OF_REFRESH,
                              A.MV_OBJECT_NAME,
                              A.LAST_REFRESH,
                              A.REFRESH_STATUS
                    FROM CATEBS.DISCO_MV_REFRESH_ORDER A
                    WHERE A.ORDER_OF_REFRESH <= 5
               ORDER BY A.ORDER_OF_REFRESH ASC;
BEGIN
FOR I IN MV_LIST
LOOP
V_NAME := I.MV_OBJECT_NAME;
V_FAILURES := 0;
UPDATE DISCO_MV_REFRESH_ORDER SET LAST_REFRESH = NULL WHERE MV_OBJECT_NAME = V_NAME;
UPDATE DISCO_MV_REFRESH_ORDER SET REFRESH_STATUS = 'INVALID' WHERE MV_OBJECT_NAME = V_NAME;
IF I.ORDER_OF_REFRESH = 1
THEN V_START_DATE := SYSDATE;
ELSE V_START_DATE := V_NEXT_DATE;
END IF;
DBMS_JOB.SUBMIT(V_JOB_NO,'DBMS_MVIEW.REFRESH(' || '''' || V_NAME || '''' || '); BEGIN UPD_DISCO_MV_REFRESH_ORDER_TBL; END;',V_START_DATE,NULL);
SELECT A.REFRESH_STATUS, A.LAST_REFRESH INTO V_PREV_STATUS, V_NEXT_DATE
FROM DISCO_MV_REFRESH_ORDER A
WHERE (I.ORDER_OF_REFRESH - 1) = A.ORDER_OF_REFRESH;
IF I.ORDER_OF_REFRESH > 1 AND V_PREV_STATUS = 'VALID'
THEN V_NEXT_DATE := V_NEXT_DATE + (2/86400);
ELSE V_NEXT_DATE := NULL;
END IF;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND
     THEN
          IF MV_LIST%ISOPEN
               THEN CLOSE MV_LIST;
          END IF;
NULL;
END Disco_Mv_Refresh;
My problem is that it doesn't appear to be looping to the next job. It worked succesfully on the first job but not the subsequent jobs (or materialized views in this case).... Any ideas?

Burner not burning- one error after another ...

greetings
i am trying to burn photo files to cd.
it's running tiger 10.4.11, recently updated by somebody who works for apple at their main headquarters and now the machine is a mess. it's considerably slower, takes forever to load pages, and have been trying completely unsuccessfully to get about five gigs of photos backed up on something other than this 800 dollar paperweight for two weeks now.
i knew i should not have let that guy touch my stuff. i'm completely screwed here.
please somebody help me
error codes abound-
0x80020063
0x80020022
thanks

well i had to buy the keyboard (2 actually- first one only lasted 1.5 years) and monitor too . . .
it has 512 ram, a 40 gig drive (with 25 gigs left - can't trash anything else for room because what's on it is what i need to burn)
the dvd drive does play. and i can load stuff- just can't get it off. (IT off -- not me!)
and yes i have tried different discs and burning different files.
at first only the maxell cd's would work (no cheepies like i'd use for music that would end up getting trashed in the car) but now they don't even work.
apple says i need to replace the burner, which will cost $385 plus $85 labor.
for that i could be halfway to a bigger powerful newer pc
....but in another four years i bet i'll be right back where i am right now.
i bought the mini because the imac i first bought gave out after, yep, four years.
i guess my only option to save my photos would be to get them on an external hard drive, but then how long will they be safe there before THAT breaks?
oy
maybe i'll just go back to film. coz once you got them there- you got them for life.
i have perfectly good negs from 20 years ago- the life of my shots from last month are at this point questionable
thanks for your help.
if you know does anybody make a computer i can expect to last more than four years?

How to "chain" two or more FLV video's so one plays after another?

We want to "chain" multiple FLV video's on the same web page.
We can combine them in my video editor but the resulting file is over 30 minutes long.
But, I'm hopeful that we can do this using code in the web page so...
1 - We convert each AVI video to FLV video and then "publish" it locally to get the associated files.
2 - Then combine the HTML as necessary to have one video play right after the other.
My question is how?
Can I just...
- copy the javascript AC_FL_RunContent code and change the 'name' and 'movie to be the name of the next video.
- and then do the same thing for the object code?
or is there a shorter or more easy way to do this?
Finally, is this the best forum for Flash FLV questions?
Thanks for any help on this.
PS - I know some will want to know why we want to chain short videos instead of just making one long video but the explination is long and will bog down the discussion.

Kglad,
AS_3 I guess.
That is the latest... right?
I'm running Flash CS3 v9 and I guess it will run either... according to the opening screen.
And since I haven't used Action Script before may as well start with the latest.
Thanks for your help.

Re: One problem after another

Mine was meant to be activated yesterday but I got the exact same status messages as you, I called them today but couldn't make sense of the guy on the phone as if he didn't really know what the problem is so avoiding my questions head on. Apparently they are gonna call me tomorrow, what about? I asked why and asked couldn't they just activate it, another question I didn't get a proper answer to.
I also chose BT because of the Sainsbury's voucher promotion which you can't claim until your set up so if they cancel the order and create a new one since the date of the promotion has passed I'm assuming their not gonna offer me that incentive any longer.
It's early days but your experience doesn't fill me with hope.

Hi alvstar1984,
Thanks for posting and welcome to the community forum.
I'm sorry for the problems you're having getting your services set up. I'm happy to help you from here. Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
All the best,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Losing one feature after another.......

Similar Messages

Maybe you are looking for