Losing Preview files when changing start point

The way I always like to work is to select raw clips from my footage, then applying all the effects I want to do on them, render and then fine tune the in and out points of the clips, to fit the music I set it to. In previous projects this worked and I could just slide the end and start points of the clips on my timeline without having to render again. But with my current project I can change the out point of my clip, but as soon as I slide the beginning of my clip I lose the preview file. This is a really ineffective way of working. I hope somebody knows a setting that will prevent this. My sequences are PAL 16:9 25 progressive and I use 50P (deinterlaced) PAL footage and some 25P After Effects compositions.
Thanks for the help!

Similar Messages

Adobe Premiere CC 2014.2: losing rendered files when using warp stabilizer

Hi,
I am constantly losing rendered files when using the warp stabilizer. So far I have tried about every hint I could find on the web such as cleaning the cache, rebuilding the rendered files, creating additional sequences etc etc.
Honestly I am getting tired of using a product that isnt cheap in the first place to rent and where a bug like this apparently persists over several product versions without being fully fixed (I have had this problem throughout 2014 but according to forum postings others seem to have problems with much earlier versions as well).
I would be really grateful if somebofy has any suggestion how this can be addressed.
I am also happy to help testing fixes - if there are any fixes available.
Thanks a lot and Happy New Year!
Martin

Hi Catherine,
Welcome to the Adobe forums.
Please try the steps mentioned below and check if it works for you.
1. Launch Premiere Pro and create a Project, go to File menu>Project Settings>Renderer and change the Renderer to Software only mode, delete previews if you get a prompt and then try to import the clip.
2. If step 1 fails or the Renderer is already on Software only mode, go to Start Menu and search for Device Manager, go into Display Adapters and Right click on the Graphics card to select Update driver software option, on the next screen choose "Browse my computer for driver software", then choose "Let me Pick from a list..." option and from the list select "Standard VGA Graphics adapters. You might need to change the screen resolution of your screen and once done restart the machine again.
Launch Premiere Pro and import the clip to check.
Regards,
Vinay

Any solutions for lost render/preview files when opening files?s

Have any solutions been found for the intermittent lost render/preview files when opening a large file? I have Premiere CS6. A large project file that I have been working on lately opened without a hitch with previews intact ...until I bought new faster hard drives and rebuilt the computer (built with the same drive letters). I just installed the latest updates. When I now open this file, a segment of the sequence always opens without previews, unrendered, no matter how many times I rendered the file previously. I don't use 3rd party plugins. I am using the warp stabilizer. I tried all the suggestions that I have found on the forums (using a blank sequence to close and open, unchecking “write XMD…” etc.) but none work. I checked the render/preview drive, and these files are on that drive but they will no longer link to the project. It now takes a good 15 minutes to re-render every time I open.

I may have found a solution. I took out the warp stabilizer, and then added it back in on the clips in question, and then re-analysed and re-rendered. So far, so good. It seems that bringing in the warp stabilizer effect in the file into the re-built computer needed re-analysing (as I do after this 2 day exercise.)

Logic changes start point of song when cycle mode recording.

If I hit a note partially before (or hold onto a note longer than the cycle end point) the start and cycle point an extra bar is added to the beginning. Say I have the start point at 1, the start point will change to 0. Is there any way around this?

This happens if I start on bar 2 as well.

Losing render files when i move off of FCP

I keep losing my render files when I switch timelines or move to another program. What's going on?

Check where your render files are set to. This may be a non-existant location so that they are not actually being saved to discl. Go and re-set the render file location and physically re-select teh drive and directory location. Ive seen this before and although at first glance the render location looked ok, when you actually re-set it to a drive/directory it started really saving the render the files and all was well.

Server started in RUNNING mode not showing in Startup Log File when MS Starts

Dear all,
When we start OSB Managed Server, server status is showing Running Status in Web logic console and it is also serving the requests. but in server Start up log file, it is not showing 'Server started in RUNNING mode' after it started.
this behavior is only for 4 managed servers in cluster of 6 managed servers. other 2 managed servers are starting and showing the message correctly.
please some body show some light on it as we need to fix this issue urgently.
thanks in advance.
pr

Dear all,
When we start OSB Managed Server, server status is showing Running Status in Web logic console and it is also serving the requests. but in server Start up log file, it is not showing 'Server started in RUNNING mode' after it started.
this behavior is only for 4 managed servers in cluster of 6 managed servers. other 2 managed servers are starting and showing the message correctly.
please some body show some light on it as we need to fix this issue urgently.
thanks in advance.
pr

New download of keynote files when changing wifi network with iPad

When i change the Wifi Network with my ipad3 (without 3G) it always starts to download the keynote, numbers and pages files from the iCloud. You can't open any file until its downloaded again, you just see the Folder and the file as a placeholder.
In my opinion this Akers totally no sense. I expect a synchronization between iPad and the iCloud like it woks with mail, kalender. Even dropbox just downloads the file you select for use. In my case I have 64 files only in keynote, created on the iPad and eaven without changing something it will re download all files from the iCloud before I can use them.
Anybodydid the same experience ?
Is this a bug or a really shh.... Feature?

No that's not my experience, it's clearly not working as it should. Perhaps you should restore your iPad.

AirPort Disk Access Existing files when changing Secure Shared Disks with Accounts

Hey, community;
I have a 1TB Disk which I was using on my Mac, then upon aquisition of an AirPort Extreme Base Station, plugged it into there. File sharing was fine when set to "AirPort Password" for Security settings, but when I changed to "Accounts" and set up accounts, the existing paritions were there... they just couldn't be accessed.
Tried finding the solution online, to no avail.
Just writing to say I've solved this! Once you set the Security type to "Accounts," folders now appear on your USB Drive, one for each user you set up, as well as a "Shared" folder.
I just dumped the existing contents of the drive into the "Shared" folder, and now everyone can access those original files.
I hope this helps someone out.

Restore the old files by removing the accounts.. ie press and hold reset.. once you go back to a reset all files are available again anyway so the security is illusionary.
If you want to secure files encrypt them.
BTW the old airport utility would have warned you that what you were doing will stop access to your files.
Of course the latest toyland utility probably showed you nothing.
Never start accounts with files on the TC.. you should offload them.. create accounts then load them back.. to the illusion of security at least.

Reload sequence file when changes on disk

Hi,
I wrote a custom user interface based on the TestStand (TS) Operator Interface. When I run a sequence file on it and I edit it in the TS editor and I restart an execution, it seems to keep loading the first one when I launch the execution. The only way I can do this is by restarting the GUI.
I read a lot and tried many things and I can’t figure out what do I need to do to have the sequence file reload from disk on the 2nd execution after changes has been made.
I tried many thing and it seems to work when I release the seq file 2 times (!). But, as expected, the 2nd time it get released, I get an error that the file was unloaded from the TestStand Engine. And the weird thing is that I don’t get the error when I run the 1st time or I don’t make changes to the seq file.
Do you see anything wrong? Or have another suggestion how I could achieve that?
Can I see which seq files are in the internal cache? That could be useful to debug.
Thank you.
A code snippet in C# is in attachement.
Attachments:
C#-code.rtf ‏2 KB

A few more ideas:
1) Are you perhaps using this file path with an ApplicationMgr or SequenceFileViewMgr API? You need to make sure that this file is not open by the ApplicationMgr or assigned to a sequencefileviewmgr as well. The applicationmgr or sequencefileviewmgr likely have a strong reference to the sequence file if you have assigned it or opened it with one of their APIs. You might want to try switching entirely to the applicationmgr APIs instead of using the engine APIs as that's probably less likely to lead to conflicts between the two.You could try ApplicationMgr.OpenSequenceFile() and ApplicationMgr.CloseSequenceFile().
2) Have you tried this with a simple, empty sequence file and simple default Sequential process model to verify that it's not related to anything in the sequence file you are running or any code elsewhere in your application? It's possible for code in the sequence or process model itself to be calling GetSequenceFile or GetSequenceFileEx.
3) Have you tried adding a delay between WaitForEndEx() and ReleaseSequenceFileEx()? This is not that likely to be the cause, but perhaps there is additional code required to execute in the execution thread after WaitForEndEx returns before the sequence file can be unloaded. If you add a small delay (i.e. Thread.Sleep(1000) between those lines of code it might work. This would not explain why the file couldn't be reloaded when you use GetSequenceFileEx with the UpdateFromDisk flag though so probably is not the problem.
I tried to reproduce this problem in the sequence editor by running an
execution with a sequence file, closing the sequence file, overwriting
it with a different sequence file and reopening it and I was unable to
reproduce the problem. I got the new file opened as expected. This is
the equivalent situation since there is a completed execution still
open. The sequence editor does not use the Unload flag on
ReleaseSequenceFileEx, but it does use the UpdateFromDisk flag on
GetSequenceFileEx() and it seems to work, correctly loading the new
version of the file in this case. So there must still be something different in your case. I suspect that it's not the execution that has the extra reference in your case, but something else, perhaps the ApplicationMgr or SequenceFileViewmgr.
Also, as a side issue, if you are writing a custom UI, I'd recommend using UIMessages to determine when an execution completes rather than WaitForEndEx(). Basically handle the ApplicationMgr.UIMessageEvent and look for UIMsg_EndExecution and check that the execution associated with the UIMessage is the one you care about. Using the UIMessage like this has a couple of advantages:
1) It allows your UI to go back to executing in it's main message processing loop (Some things will not work correctly without this).
2) It gives you the potential to track and handle running multiple executions in parallel. Just look for and track the multiple UIMessages that such executions generate.
Please let us know if any of these ideas helps or if you are able to figure out the cause of the problem. If you are still unable to get it working and can't figure out the cause, please attach an example program and sequence files which reproduce the issue.
Hope this helps,
-Doug
Message Edited by dug9000 on 03-02-2010 10:03 AM
Message Edited by dug9000 on 03-02-2010 10:04 AM

Losing Title Bar when changing Look and Feel on the fly

Hello,
I have an option in my Swing app for the user to change the Look & Feel on the fly by selecting from a radio button list. The look and feel is changed when the user make the selection, however the Windows Title Bar disappears. Any ideas what I'm missing?
private void setLook(String mode)
String lookAndFeelClassName = null;
UIManager.LookAndFeelInfo looks[] = UIManager.getInstalledLookAndFeels();
for (int i = 0; i < looks.length; i++)
if (mode.equalsIgnoreCase(looks.getName()))
lookAndFeelClassName = looks[i].getClassName();
break;
try
m_view.dispose();
UIManager.setLookAndFeel(lookAndFeelClassName);
SwingUtilities.updateComponentTreeUI(m_view);
m_view.setVisible(true);
catch (Exception e)
JOptionPane.showMessageDialog(m_view, "Can't change look and feel:" + lookAndFeelClassName, "Invalid PLAF", JOptionPane.ERROR_MESSAGE);

You are disposing the view. My guess is that this is your problem. Try creating a new one instead of just showing the old disposed one

Execute a .sh file when i start the solaris 10

Hi guys,
I want that some .sh files executes, without my intervention, every time that my Solaris 10 starts.
Someone could help me or send me a link of it !?
Regards.
Thank you,
Leví

1.
copy your script into /etc/init.d
2.
make a link like
ln -s /etc/init.d/myscript.sh /etc/rc2.d/S90myscript
reboot.
hth
-- Nick

Losing my files when i do reserve copy

Hello,friends,i need help. When i do reserve copy of my system nothing goes wrong,but when i restore my computer from reserve copy ii do not find some of my folders and files..( nothing special,folders with photos) why? where my files? Please help me..

Without any details as to how you're backing up your files and what software you're using to do it with, nobody can say.

HT2506 How do I compress a Preview file when there is not a "save as" option?

I am trying to compress a jpg or a pdf in preview. I have read the answer: save as, etc. My Preview doesn't have a "save as" option, just "save". Is there another way to compress it?

Use the Export menu option.
Choose JPEG and there is a slider for compression (quality).

Printing all messages when WEBLOGIC starts in its log file

Hello i am following all these steps
Step 1. Copy log4j-1.2.9.jar & wllog4j.jar under domain_root/lib folder.
Step 2. Create log4j.xml and drop it under domain_root folder. If you have log4j.xml inside the application(EAR/WAR), I would recommend to move outside EAR/WAR as
changing severity (log level) would require re-deployment. To avoid this, we can move log4j.xml into domain root folder but again the server needs to be bounced.
But there is a fix.
Step 3. Login to weblogic server console. Go to Servers -> Admin Server-> Logging.
Click on advanced mode. Change the logging implementation from JDK to Log4J.
Click save.
Step 4. Activate changes. Re-start the admin server.
This should enable log4j and should write logging into log file mentioned in log4j.xml or properties file.
Hang on! There is a catch here. Say now I want to change the log level from DEBUG into WARN or ERROR.
How do i do?
We go to log4j.xml and change the level.
Now how does this change take into effect? It needs bouncing of the server.
I have given below sample log4j.xml for your reference...
log4j.xml:
<?xml version="1.0" encoding="UTF-8" ?><!DOCTYPE log4j:configuration SYSTEM
"log4j.dtd">
<log4j:configuration>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern"
value="%d [%t] %-5p %c - %m%n"/>
</layout>
</appender>
<appender name="FILE" class="org.apache.log4j.RollingFileAppender">
<param name="File" value="/log/myApp.log"/>
<param name="Append" value="true"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d{ISO8601} %t %-5p %c{2} - %m%n"/>
</layout>
</appender>
<logger name="org.apache">
<level value="WARN"/>
</logger>
<logger name="org.springframework">
<level value="WARN"/>
</logger>
<root>
<level value="DEBUG"/>
<appender-ref ref="FILE"/>

</root>
</log4j:configuration>
I Followed all these steps , but finally i am getting an empty file myApp.log at specified destination , i want all log messages inside that file when WEBLOGIC starts , so what needs to be done for that

I guess the issue here is that somehow the log4j configurations are not getting picked up.
Please try adding the LOG4j configurations explicitly onto the classpath:-
set LOG4J_CONFIG_FILE=log4j.xml
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS% -Dlog4j.configuration=%LOG4J_CONFIG_FILE%
@REM set SAVE_CLASSPATH=%CLASSPATH%
set SAVE_CLASSPATH=%CLASSPATH%;C:\Oracle\Middleware\user_projects\domains\base_domain\config
-Sandeep

"Use Preview Files" works in CS5.5 but is "Useless" in CS6

I'm a heavy user of the "Use Previews Files" option when exporting files. This has worked great with Premiere CS5.5 but using the same method in CS6 no longer works and reverts back to rerendering the original files in the timeline and rerendering all the effects on them which is very time consuming since the original files are HD and are being downscaled in a DV widescreen timeline.
Anyone figure out how to get Premiere CS6 to correctly find the preview files when exporting using the "Use Preview Files" option?
In the meantime, I had to load all the preview files I had rendered back into a new timeline and reassemble them in the correct order. Once I did that, I exported this 1 hour 38 minute timeline to an MPEG-2 file which only took 19 minutes instead of the 7 hours it would have taken even with the "Use Preview Files" on and with a fully rendered timeline.
Again, it works great in CS5.5 so something changed in CS6 to make the "Use Preview Files" useless now.
Randy

OK, decided to do a simple project and test the preview files. One HD AVCHD video clip, 24 minutes long. Dropped into a DV widescreen project and the video clip downscaled to match the project. Added a color correction filter, Shadow/Highlight filter and Sharpen filter. Cut the clip into 4 pieces and adjusted the color correction on each. This will generate 4 preview files. This is basically what my larger project involve but with many more video clips.
Did not render timeline or make any preview files then exported an MPEG-2 file. Took 35 minutes.
Rendered timeline which produced 4 preview files in the DV AVI format. Took 1 hour.
Exported an MPEG-2 file again but this time selected "Use Preview Files". Took 35 minutes.
Exported a DV AVI file (same format as the Preview files) but this time selected "Use Preview Files". Took 35 minutes.
Imported the 4 DV AVI preview files and put into a new sequence. Exported an MPEG-2 file using no preview files. Took 3 minutes.
Imported the 4 DV AVI preview files and put into a new sequence. Exported a DV AVI file using no preview files. Took 1 minute 30 seconds.
Randy

Losing Preview files when changing start point

Similar Messages

Maybe you are looking for