Losing ram! Please help

Ok, I'm very new to Mac but not using a computer in general so hopefully this will be painless to solve
Problem: Using iStat I monitor the various things my computer does. Being new to Mac, and this widget in general I cannot speak for it's accuracy but I can speak for it's overall consistency.
Ever since installing the latest update for the OS, and installing a program called Shapeshifter (Which I immediately uninstalled, using spotlight to find every instance of it on the computer).
My ram just keeps disappearing till there is literally 65 mb left, this happens over the course of say an hour and is accompanied by random fluctuations in cpu usage. There is clearly something going on in the background that I have no knowledge of how to find, and stop.
Just to say it normally my ram is steady, and only fluctuations when using a program and goes back once I am done. So this is very strange to me for this to be happening.
Any help you could provide would be very much appreciated!
Intel based iMac Mac OS X (10.4.9) I do have boot camp installed, but this has not been problematic nor was it used at all today

Well, it's hard to imagine what might be causing the problem, since the picture was taken after a restart. Ideally, you should look at Activity Monitor once the problem has occurred, and see which processes are using the memory. In my experience, Safari has memory leaks and will eventually gobble up all your free RAM, dragging down system performance. Quitting Safari fixes it. But IIRC you said it was happening after a couple hours, and it usually takes several days to a week for Safari to show this behavior for me.
Also, Dashboard widgets are notorious consumers of RAM. I seriously trimmed down the number of widgets displaying in my Dashboard after discovering that they were using more than half my RAM. Now I only have those that I really couldn't happily live without.

Similar Messages

I have OS 10.4.11 with only 512 MB of memory and am trying to download Snow Leopard 10.6.3, it requires 1GB ram please help.

I have OS 10.4.11 with only 512 MB of memory and am trying to download Snow Leopard 10.6.3, it requires 1GB ram please help.

See Here for Installing RAM...
MacBook http://support.apple.com/kb/HT1651
Be sure to get the correct matching RAM for your Computer

K9A2 CF-F V2 won't run 1066mhz ocz ram please help

Ok I have searched this board for anyone having this trouble and cant seem to find it. Now I am thinking I bought the wrong board, so here is my problem. K9A2 CF-F V2 MB w/ Phenom Tri-core processor with 2 sticks of 1GB of OCZ 1066 ram = 2gb total on in each slot 3 and 4 but the slots are different colors but according to most that shouldnt make a difference, I have changed every setting in the bios that I can see but the fastest I can get the ram to run is 800mhz. some one please help. I saw where someone says to change the volt setting in bios for the mem. but I cant find where to change that, also saw something about 5-5-5-18 t2 so I did that but what about the rest of the settings they leave at auto but still no avail then I saw another post say to set them at 5-6-6-18 T2 still nothing wont boot with either of these configs, what in the heck am I doing wrong starting to think that the MB wont run OCZ mem. maybe different mem would work what you think? like I said 667 and 800 will work but 667 seems more stable. ok thats it for now by the way 580 watt power supply .

ok here is what it says
Cell menu:
current cpu clock = 2100mhz (no option to change here)
current ddr mem freq. = 800 mhz
D.O.T Control = Disabled (current) or private 1% up to Commander 15%
AMD cool and quiet = disabled (current) or enabled
HT Ratio = Auto or 1x upto 13x
Adjust cpu FSB frequency = 200mhz or up to 600mhz max
Adjust Cpu Ratio = 10.5x or downto 4x
ADVANCE DRAM CONFIGURATION = PRESS ENTER
after pressing enter here is what I have set
Dram timing mode = Both (current) or Auto or dct0 or dct 1 or back to both
Cas latency(cL) = Auto (current) or 3clk upto 7clk DH only
TRCD = Auto (current) or 3clk upto 6clk or back to auto
TRP = Auto (current) or 3clk upto 6clk or back to auto
TRTP = Auto (current) or 2clk - 4clk or 3clk - 5clk or back to auto
TRAS = Auto (current) or 5clk - 18clk or back to auto
TRC = Auto (current) or 11clk- 26clk or back to auto
TWR = Auto (current) or 3clk - 6clk or back to auto
TRRD = Auto (current) or 2clk - 5clk or back to auto
TWTR = Auto (current) or 1clk - 3clk or back to auto
this is the same for the second row
Bank Interleaving = Auto (current) or disabled
1t/2T memory timming = 2T (current) or 1T
Software memeory hole = Enabled (current) or Disabled
unganged mode support = Enabled (current) or Disabled
Now Back to cell menu
FSB/MEMORY RATIO = 1:2 (current) or 1:1 or 1:1.33 or 1:1.66 or 1:2 or 1:2.66 or auto
ADJUSTED DDR MEMORY = 800MHZ (no options here)
Adjust PcI frequency = 100 (current) or upto 150
Auto Disable Dimm/Pci Freq. = Enabled (current) or disabled
Cpu volts = AUTO (current) or upto ?
Memory Volts = 2.1 (current) or upto 2.9 or down to 1.8 default
NB Volts = Auto or upto 1.10 - 1.40
Hypertransport = Auto (current) 1.20 - 1.50v
Spread spectrum = Disabled (current) or Enabled
that is it any tips on what to change here please do tell the 800mhz setting is very stable, memory is in channels 1 and 2 closest to the cpu, ran memtest 2 passes all good no errors not sure what else to do hmmm, thanks ahead of time

Want to Upgrade RAM, Please Help!!!

HI, I have HP Pavilion DV3-2332TX laptop, recently i upgraded it with Windows 10 Home, having 3(2+1)GB RAM 1066MHz, i want to upgrade my RAM, by additional 4GB in pleace of !GB RAM, please tell that do i have to install the new 4GB RAM of same 1066Mhz or can i upgrade it with 1333MHz or more. will it then work like 6(4+2)GB.

Hi, You are running 32 bit Windows 10, adding more RAM to 6GB is wasting money because 32bit Operating system can only access to 4GB of RAM (max). You can swap 1GB with 2GB, that's all, to make 4GB and your system can use around 3.7GB. You have to use same specs with existing RAM, higher speed won't work properly or won't work at all. Regards.

Questions on installtion and ram please help! Pc tech with new Job!

Im a Pc tech with a new job Im am in charg with a new Mac network . So Im great at PC.s just fuzzy on Macs.
Here is my problem.
IMac 17" flat panel.
New Hard drive , new cable (IDE), Tryed to install New OS ( just OS X) got throught the first 5 mins in the installer , the it stoped and told me that it had encountered an error and to restart.
Now I get an error 139 installer has unexspetanly stopped.
Press return to reboot.
Now pressing return never works have to hold start button to reboot.
Ran hardware test of cd Im gettting a a mem_/2/4 error.
I assusm that is a bad stick of memory? There is only 1 stick in there.
I belive that its using pc133 256meg for memory.
I have put a few pc133 sticks in the mac but none will work eather get a bad memory beep or no display .
Does it have to mac memory or special latency ?
Have opened the firmware and reset -all -nvram and defaults
Have remove Air Port card and all other stuff , onlly keyboard and mouse and power cord .
Does that sound right? If you need more info let me know.
Any other clues?
Any book that an tech like me (6 years fixing pcs) should read for macs? thanks for all your help in advance.
James
G5 Mac OS X (10.2.x)

Another thing to consider, a free to use download (donationware) is
MacTracker; a small data base of Apple and Macintosh product specs.
If you don't already have it, see: http://www.mactracker.ca to download.
Some online manual sites had unauthorized copies of protected works
and those sites were pulled from the internet; but they had service
manuals in pdf for many models of computers. You may be able to get
the official versions of pdf manuals through a subscription service for
an annual fee; this may require searching and asking questions. It may
also require an IT budget you may not have, to get a Mac-only archive.
At one point I was given some technical support information to trouble-
shoot my own ailing under warranty Apple computer(s) and the information
is very helpful, when you have a need for the details they contain.
I was careful to use them for non-invasive troubleshooting only.
One older online source appears to have ftp:// links, but I was never
able to make them work. The site may not have valid content or could
be somehow blocked; so if you find such a site by searching for older
Apple Manuals online, it may not yield anything. Or it may be illegal.
Some of the low-end RAM chips can be problematic; I found at least
one to add major issues in my iMacG4 and made it hard to diagnose
another major hardware problem. Tossing the cheaper RAM (at retail
was higher cost than decent RAM) was the best thing; got a better one.
There should be a little information on boot ROM (firmware) per model in
the MacTracker database you can use offline. You may need to know more
about the use of Open Firmware in Macs. Hope this helps some.
PS: for a time, you could get tech manuals on CD from places
such as http://www.applerescue.com/ (they have OS installers
on disc for sale there, primarily) and also a search of the web
may get you a source of tech books for repair service.

I want to upgrade my imac 10.4 Tiger to Snow leopard but will not install as it states I need 1GB RAM please help?

I want to upgrade my imac from 10.4.11 Tiger to Snow Leopard, I have tried to install but it states I need 1GB RAM to install
can anyone help as to what I need to do next.
Thanks

Go to a site such as OWC's or Crucial's and buy the RAM.
(124598)

MSI RD480 Neo2 - Missing RAM - PLEASE HELP!!

Hi,
I have just installed 4x1gig of Corsair Value RAM onto this motherboard BUT when I go into the BIOS it only sees 3 gig. I am not too sure what BIOS version I am using as I am running Windows XP 64bit and do noy know the best way to upgrade the BIOS to the latest version (and I don't even know if this will fix the problem).
Does anyone know how I can get it to see all 4 gig? - I have looked at the BIOS and there is nothing obvious.
Any help will be MUCH APPRECIATED!

No idea on the bios. Check the product page for your board at MSI's main site.
As for the memory Windows XP can only use 4GB total. However it sounds like some of the mamory is being used to configure some of the Bios goodies.
Things like Bios Shadowing, AGP/PCI card space configuration, PCIe Card space configuration, IDE Mapping and so on leave a hole in memory addresses that are contained within your 4GB memory space. That is why you can't use those addresses. There are workarounds on some systems however it slows ram way down. And note that not all MB's have Bios's that allow a correctiopn on this. I can't say whether your Bios has that or not as I don't use ATI based boards. Outside of memory remapping there is nothing you can do with a 32bit OS period. That is a definate limit.
As for XP64 you may want to look in the Operation System area on the forum and see what drivers there are. As I do not use ATI cards or boards again I can't answer that one.

Keep losing connection, please help

I have the WRT160N router. On both the wired and wireless computer I cant always open the internet, even thoue it says its connected. Im also using the Linkys adapter, samething happens with this. Any help please?

You need to Upgrade/Flash your router's firmware if it is loosing the connection...You can download the Firmware from here , Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

MJPEG source color/balance/contrast etc all no good. Someone please help ;(

Hi all,
I'm having an issue and worst of all I don't know if it's Adobe with their 6.0.2 update or my own itchy fingers. But something got screwed up and I can't get it back to where it was. In a nutshell the MJPEG footage in PPro is all out of whack with respect to color balance/brightness/contrast all that sort.
I don't really have a good frame-for-frame comparison I could show so what I did was generate a Bars video in Premiere, then video capped the clip playing in monitor using Bandicam. Portion captured using Xvid looks fine, just like the MJPEG used to look before. One captured using MJPEG is fubar. Not the clip itself, that still is fine and dandy, just looks bad in Premiere. And not only in Source/Program monitor, it exports "washed out" as well. (tried H.264, AVI, the lot)
Here's a composite of the difference:
"M-JPEG IN PREMIERE" is how the footage now looks imported and viewed in Monitor (also exports looking...bad)
"M-JPEG IN M-PLAYER" is what same MJPEG clip looks like playing in WMP (and used to look like in Premiere before this mess)
"XVID IN PREMIERE" is how the Xvid footage looks imported and viewed in Premire
"XVID IN M-PLAYER" is what Xvid looks like playing same clip in WMP
If you look at the "M-JPEG IN PREMIERE", this is totally wrong and it used to look just like the other 3, IOW, no difference.
Also, any video effect (accel, YUV or not) applied to MJPEG source in Timeline crashes PPro on Exit or Save. Every. Time.
Ok, so what I've done to possibly screw things up:
1 For some strange reason I decided to put a 3rd party MJPEG codec on my machine. Not sure why, things seemed to work fine. But, spilled milk. So I used MainConcept because I was happy with their stuff in the past. Noticed no effect on my PPro goings so out it went. Maybe because it was 32-bit codec and I'm on x64 machine.
2 The same happened with Morgan MJPEG x64 v3, didn't seem to make any difference either, out it went.
3 Then window popped up telling me PPro has a 6.0.2 update. Why not, the thing is crashing constantly maybe it got fixed. So after the update is applied I go into my project, it is a total useless mess (not the issue here though) but all of the sudden I view a clip and notice the scene is a complete washout. There was some Luma Correction applied to it to bring it out of the dark somewhat and now it was just horrible. So I checked rest of the project and few others and yup, everything (either with effects or straight up) is just ... wrong, washed out, bland, too bright and all that.
Now, as much as I'd like to hold Adobe responsible for that, I don't believe in coincidences so I'm thinking me mucking about with those codecs is the issue because only MJPEG footage appears to exhibit those problems. Question is, is this something that can be "fixed"? And I don't mean by color correction in post, not gonna happen. I really hope some smart people here can surprise me with a "Hell yea" because otherwise I am facing complete reinstall of the system (since I know for a fact it was OK before) and that will take several days if not a week or two. Not looking forward to this, obviously.
What I've tried:
Just about everything I could think of and few things that did not make sense, too. Different preview formats, MPE GPU/SW, new project, import old project, clean cache/previews, export to various formats; Look thru registry and some codec sniffers to see if there's anything left over from those other 2, all "seems" in order; Uninstalled PPro completely, reinstalled 6.0 from my original media.
No go, things look the same (bad) in Premiere. Again, this is something that "happened", it was never like that before and it's not some monitor calibration issue. So either I did it (likely) or 6.0.2 update installed something that is otherwise not removed by uninstaller and persists after complete reinstall reverting back to 6.0.
Machine specs:
i7 with Win 7 x64 GTX 680 and gobs of RAM,
Please help and TIA for any. I'm in real deep S if I don't get that solved.

When you uninstalled Premiere Pro did you use the adobe creative suite cleaner tool? If not you can try the uninstall again and try using the cleaner tool and the steps listed on this page...
http://www.adobe.com/support/contact/cscleanertool.html
That link is the download link and also the instructions on how to use it.
You could also try to install the BMD MJPEG codec although I know when I had it on my system before my reinstalled windows back when Premiere was still at version 6.0 it made any timeline that had BMD's MJPEG codec in it constantly crash. But it might work.
http://www.blackmagicdesign.com/support/detail?sid=3945&pid=4041&leg=false&os=win
This link will allow you download their desktop video program and installing that program will install the BMD MJPEG codec on your system.
Also have you checked how the files look in another media player like VLC?

Please Help! Somehow I have messed up my password and now I am locked out of my iPod. Is there a way to get back in without losing all my photos?

Please Help! Somehow I have managed to mess up my password and now I am locked out of my Ipod. Is there a way back in without losing all my photos?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

790FX-GD70 Ram Problem (PLEASE HELP!!)

Hello all,
I recently installed my 790FX-GD70 motherboard with all the ram and all that
I have 2x4gb RAM but when i put both sticks of ram in i do not get anything on the screen but when i install 1 stick of ram into the 2nd dimm windows loads up and all that but after like 10-15minutes i get a blue screen and at the bottom it says "Dumping Physical Memory to Disc" then it reboots loads back to windows and does the same thing again, but i dont know why when i put 2x 4GB ram the same the computer boots up but nothing comes on the screen.
Any help please?
Really need to fix this.
750W PSU
AMD phenom II 850 @ 3.3GHz
2x4gb ram only 1 allowed
2x ASUS GeForce 550TI's
PLEASE HELP ME!!
Nothing is overclocked.

Hello Sorry here are the links to my PSU and RAM!
PSU:
http://www.ebay.co.uk/itm/NEW-QUIET-ARTIC-750W-ATX-PSU-8-PIN-SATA-PCI-E-PFC-120mm-FAN-POWER-SUPPLY-/140722519305?pt=UK_Computing_PowerSupplies_EH&hash=item20c3b73d09#ht_3045wt_1012
RAM:
MTEX 1333MHz-----1111G14JCJ6-----MTC003944
I got these numbers of the ram itself so i don't know which is the model number and the serial number.
And the voltage of the ram is at default. 1.5 i think
I did try and set the voltage to 1.8 and put my 8gb ram in, it booted up to windows and i managed to put 2 sticks of ram in then about 10 minutes later it went to blue screen again and said dumping physical memory to disc
I done a error check of the ram and it came up with no errors.

HT4847 How can I change my iCloud email address without losing all my data and what not???? Please help...

How can I change my iCloud email address without losing all my data and what not???? Please help...

Welcome to the Apple Community.
You can't change it but you can create an alias to use.

Please Help :( iMac 20" refuses to boot up with anymore than 1gb ram?

Please Help iMac 20" refuses to boot up with anymore than 1gb ram? It was fine 4 days ago and had been working with a 1gb stick in one slot and a 2gb stick, which had replaced the orignal 1gb stick that I got it with, in the other and it had shown 3gb of ram and was working just fine with that since November? It went to sleep briefly 4 days ago while I was waiting on a customer and I came back to try to wake it up and it never would forcing me to hard boot it. When I did that it would only go to a black screen with a solid white light on the power indicator. Over and over again and same thing. I read and tried every suggestion I could possibly find in this and a few other mac forums to no avail.
I finally after reading about RAM issues etc. I decided to power off and take out the ram sticks and try them one at a time in each slot. So I took out the 2gb stick and did the SMC reset and it would boot up and work just fine with the 1 gb of ram. So then I went through the same process with the 2gb stick and it would not boot up only go to a black screen with white solid light again (NOT flashing). So then I tried the other original 1gb I had replaced with the 2gb and it worked just find like the other 1gb. So then I tried just 1gb stick in the other ram slot (back facing one) and with just the 1gb strip it booted up and worked fine. Tried it with the other 1gb stick and once again that one too worked just fine. So I determined it wasn't the slot itself I thought? I then tried the 2gb in the back slot and it would not boot only go to the black screen white solid light deal like before. So I thought well ok it's obviously the 2gb ram must have somehow went bad (even though I have only had it since November) and I thought well I will just use the (2) 1gb sticks in each slot and then that will at least give me 2gb because only 1gb really ***** LOL. So I proceeded to go through the same shut down process installed both sticks (I always push them to I feel them click and my fingers have a nice indention on them) reset the SMC and turned the power one and.... It would only go to the black screen with white solid light on power indicator???? I went through the same above process at least 3 times and again today a few times and I can't figure it out and I tried to search and search and I couldn't find anything like what I am experiencing.....What happened? Please help this slow Imac is killing me. It will work with 1gb ram only nothing more? Here are the specifics of my Imac.
It is a 20" Late 2006 Intel Core 2 Duo 2.16 ATI Radeon X1600 256 MB graphics card and Ram with now only 1gb (did have 3gb) and I am running OSX Lion 10.7.5
When I go to system report and go under memory it shows this:
BANK 0/DIMM0:
Size:          1 GB
Type:          DDR2 SDRAM
Speed:          667 MHz
Status:          OK
Manufacturer:          0xCE00000000000000
Part Number:          0x4D342037305432393533435A332D43453620
BANK 1/DIMM1:
Size:          Empty
Type:          Empty
Speed:          Empty
Status:          Empty
Manufacturer:          Empty
Part Number:          Empty
Serial Number:          Empty
Any help I can get would really be appreciated. Thanks in advance
ALSO...Here is also a pic of the system log right before it happened. It even changed the date to 07/2014????
I have some more if needed???????????????
<Personal Information Edited by Host>

The Memtest just completed and came back like this? It only test the single 1gb chip because anything more in this computer it won't go past the black screen with solid white power light.
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
NOTE: No command-line arguments have been specified
Using defaults: Test all available memory, one test pass, no logfile
Mac OS X 10.7.5 (11G63) running in multiuser mode
Memory Page Size: 4096
System has 2 Intel core(s) with SSE
Requested memory: 250MB (263086080 bytes)
Available memory: 250MB (263086080 bytes)
Allocated memory: 250MB (263086080 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 125MB (131543040 bytes) starts at local address 0x0000000101000000
Buffer B: 125MB (131543040 bytes) starts at local address 0x0000000108d73000
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 250MB region...
Stuck Address       : ok
Linear PRN          : ok
Running comparison tests using 125MB buffers...
Random Value        : ok
Compare XOR         : ok
Compare SUB         : ok
Compare MUL         : ok
Compare DIV         : ok
Compare OR          : ok
Compare AND         : ok
Sequential Increment: ok
Solid Bits          : ok
Block Sequential    : ok
Checkerboard        : ok
Bit Spread          : ok
Bit Flip            : ok
Walking Ones        : ok
Walking Zeroes      : ok
All tests passed! Execution time: 362 seconds.
logout
[Process completed]
Seems Okay I guess?

Please help me figure out how much and type of RAM I can add to my P'Book!

I have a 12" PowerBook with DVI input. The computer tells me it has the following:
memory; Dimmo/built-in 256MB(size) Built-in(Type) Built-in(Speed)
Dimm1/ j31 512MB DDR SDRAM PC2100U-25330
PCI/AGM GeForce FX Go5200 32MB (VRAM - in total)
About this Mac says Processor 1GHz PowerPC G4
Memory 768 MB DDR SDRAM
Please can someone tell me exactly what I can put in this machine to maximise its RAM? Help much appreciated!

Welcome to the Apple discussions.
Have you checked the specs at http://support.apple.com/specs/powerbook/PowerBookG4_12-inchDVI.html . It says you can have a total of 1.25GB ... that means you can replace the 512MB card with a 1GB card to maximize the memory.
If you're going to upgrade your memory, recommend Crucial, Kingston (not their value ram), or Samsung. You can also scan the discussions for other memory that has worked. Our Powerbooks are picky about what memory works ... a case where cheapest may not be the best choice. Crucial guarantees it's memory will work when chosen from it's memory selector on it's web site.

Please help me I'm losing my mind! I can't sync any and i mean ANY Video! i tried everything! i read a lot of these tips and stuff but i can' sync anything! as in mo video syncing i don't know what is wrong! please help me! i'm begging

I really don't know what else to do anymore i've tried everything! i saw i tried re installing itunes I downloaded quicktime but whatever i try i can't sync any videos into my itunes 11 as in there is nothing I click "Open" like how i usually sync things and then clicked on the video. after that the little window will just dissapear and nothing happens, i'm serious i tried looking for it in the recently added, in the music, in the movies, TV shows, home videos nothing i can't find it anywhere and i know that i SHOULD be able to synce those videos because i synced those videos before. please help me I'm losing my mind!

Generally i found this thread because i've also got troubles with coax output my problem is in choppy sound with scratches and clipping in Windows 7, when i try to play Dolby Digital or DTS audio in movies or even test sounds from speaker control panel. In win xp all works fine - and in win7 only pcm stereo can normaly being output.
I try with different drivers (official and from daniel) and nothing helps...
yep...bios of my motherboard was configured to lower CPU ratio and voltage when idle (C1E option). I turn this option off and all works fine now)

My Macbook Pro(I bought in November 2012) 8 GB Ram, Suddenly Running Super Slow Please Help Me

Hello Experts ,
Please help me
my macbook Suddenly Running Very slow not vey its super slow please help i am attaching Report
EtreCheck version: 2.1.8 (121)
Report generated February 5, 2015 at 6:04:18 AM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,2
    1 2.9 GHz Intel Core i7 CPU: 2-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 410
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 10:25:19
Disk Information: ℹ️
    TOSHIBA MK7559GSXF disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 748.93 GB (242.19 GB free)
            Core Storage: disk0s2 749.30 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Logitech USB Receiver
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Configuration files: ℹ️
    /etc/hosts - Count: 1
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [not loaded]    com.BlackBerry.driver.USBCDCNCM (1.0.10 - SDK 10.7) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryVirtualPrivateNetwork (1.0.18 - SDK 10.8) [Click for support]
    [not loaded]    foo.tap (1.0) [Click for support]
    [not loaded]    foo.tun (1.0) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.cisco.nke.ipsec (1.0.0) [Click for support]
    [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.97) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) [Click for support]
    [not loaded]    com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Click for support]
Startup Items: ℹ️
    CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
    Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
    [loaded]    com.paragon.NTFS.trial.plist [Click for support]
    [loaded]    com.paragon.NTFS.upd.plist [Click for support]
Launch Agents: ℹ️
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.teamviewer.teamviewer.plist [Click for support]
    [running]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    [running]    jp.co.canon.CUPSCMFP.BG.plist [Click for support]
    [running]    jp.co.canon.UFR2.BG.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.chungwasoft.Shimo.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [running]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.rim.tunmgr.plist [Click for support]
    [loaded]    com.teamviewer.Helper.plist [Click for support]
    [running]    com.teamviewer.teamviewer_service.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
    None
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.12 [Click for support]
    AdobePDFViewer: Version: 10.1.12 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.2.4 - SDK 10.6 [Click for support]
    googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
Safari Extensions: ℹ️
    AdBlock
    iTube Studio
3rd Party Preference Panes: ℹ️
    AirServer [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Java [Click for support]
    Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        31%    TeamViewer_Desktop
        20%    WindowServer
         1%    launchd
         1%    TeamViewer_Service
         0%    UFR II BackGrounder
Top Processes by Memory: ℹ️
    180 MB    mds_stores
    172 MB    Finder
    103 MB    WindowServer
    88 MB    TeamViewer_Desktop
    86 MB    mds
Virtual Memory Information: ℹ️
    2.87 GB    Free RAM
    4.13 GB    Active RAM
    523 MB    Inactive RAM
    1.07 GB    Wired RAM
    2.58 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 4, 2015, 11:25:03 PM    /Library/Logs/DiagnosticReports/Activity Monitor_2015-02-04-232503_[redacted].crash
    Feb 4, 2015, 07:27:24 PM    Self test - passed
    Feb 2, 2015, 07:47:02 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/TeamViewer_2015-02-02-194702_[ redacted].crash
    Feb 2, 2015, 06:37:06 PM    /Library/Logs/DiagnosticReports/Microsoft Word_2015-02-02-183706_[redacted].hang
    Feb 2, 2015, 06:33:40 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeAcrobat_2015-02-02-183340 _[redacted].crash

Remove Clean My Mac: http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2
If you are not using TeamViewer, remove it also. If you had it running while you ran Etrecheck, then it doesn't need to be removed.
~Lyssa

Losing ram! Please help

Similar Messages

Maybe you are looking for