Losing signal and web when on 3G

Hello,
I have started experiencing this new problem recently, maybe after getting the new update, but not sure. What happens is when I have my 3G enabled, I keep losing service from Rogers (Canada) and the 3G sign goes away too. I can see in the top-left corner of my iphone that the service strength has flat-lined and the 3G signal has disappeared. I was adviced to change my SIM card as I was using one from my old phone. I did that, but the problem persisted. What I have noticed is that when I disable 3G and be on the Edge network, the phone work perfectly. Has anyone experienced this? Does anyone have any solutions for this?
Thanks

Options are limited but include.
1. Get a new SIM card from AT&T and reset your voicemail, see if that helps.
2. Reset your iPhone (holding down the top button and home button for ~10 seconds until the Apple logo appears on the screen).
3. Restore your iPhone. If restoring from backup does nothing then next try restore as new and start over.
4. If nothing else works then call Apple or go to an Apple store and they will replace it.

Similar Messages

Mac mini losing signal over vga when using adapter.

At my church we are installing 2014 Mac minis in the classrooms and occasionally when we power them up the main display works perfect but the projector which is plugged in through the mini display port to vga adapter the screen will just be blue like it does't have a signal. When I check in system preferences the computer shows both displays plugged in though. Powering off the projector doesn't fix the problem I have to manually unplug and replug in the adapter.

There is no limitation to get 16:9 out of VGA. How far away is the TV? What are you using for a cable? Do you get the result you want from a shorter cable?

E71 looses signal and disconnects when in remote S...

Regarding E71 and remoteSIM mode:
Anyone experiences the same problem as I do, that the phone is loosing signal and few seconds later disconnects from the in-car bluetooth (VW Touareg with RNS-510 module)? Mine keeps disconnecting, E61i did not do that. When driving E71 stays connected to in car system for maximum few minutes and than looses signal first and disconnects shortly after that.
Anyone here with the same car (unit) combination who could confirm/deny?
Thanks
Solved!
Go to Solution.

Still no solution from Nokia here.
Make sure your RNS 510 (build in VW multimedia unit) has the newest firmware (recent is 1102). You can find out which firmware your device has by holding SETUP button when the device starts (and displays Welcome to Volkswagen screen). A new menu appears featuring the software version. Should it not appear (make sure you keep holding the button until the menu appears) that means you already have the new software version.
Many people say that this solves the problem assuming you have the newest phone version 200.21.118 from 27-11-2008. I can't check myself as I have additional device connected to my RNS (TV free). Upgrading to 1102 would disable it which I don't want, so I'm still waiting for another solution...
Good luck!

Losing layers and groups when opening CC in CS6

If CC is a TRIAL program, why would you allow it to blow away layers and groupings when the doc is reopened in CS6? No I have to resinstall CC, open the doc, save it back down to CS6, and PRAY that the layers and groupings are intact. What a waste of my time.

bonnober,
You should always save to the lower version from the higher version.
Whatever is new or different is simply absent from the lower version, so it will be missing or (mis)represented in whichever way is possible.
Fundamentally, the trial version is identical to the paid version.

Why am I losing text and background when exporting from InDesign?

Hi, I am VERY new to graphic design & working with InDesign for the first time. When I export... to pdf, the 2nd page of my 3 page indesign document loses several (but not all) text boxes and the background. Anyone know why this is?? PLEASE HELP!! this is time-sensitive!! Thanks so much in advance!!

Layer set to not print? Some description of the file and contents as well as the OS and version and the version of ID would be of help.

Losing contrast and color when converting Motion JPEG OpenDML to H.264

Hey
I have a Canon IXUS 850 IS which makes "Motion JPEG OpenDML" movies.
The files are kind of big, so I am trying to convert to a better codec.
But when I try converting to H.264 with Quicktime Pro 7 I always loose color intenseness so basically contrast.
Not sure if its a general problem or a settings problem.
I am converting at 2000 kbit/s, key frame automatic and MultiPass
with no restricted profiles.
Anybody have an idea how I could compress this video without loosing so much image quality?
If you want to see what I mean, ceck out the original and the converted video in my .mac public folder in the folder "Motion JPEG OpenDML".
.Mac name tbiegner
Thanks a lot for any help
Thorsten
iMac Core 2 Duo Mac OS X (10.4.9)

Well I seem to have found a solution instead of converting to mp4 I am converting to mov with h.264 codec.
The conversion it a lot better if I select best quality the quality is as good as the original but the file size gets even bigger than the original actuaqlly double the size.
When I select low quality I get about the same size and quality as when I convert to mp4.
In the end what I find strange is, why mp4 makes automatically a "low" quality compression and there is now setting to change the quality.
Really a bit strange but at least I have now found somewhat of a solution.

IPhone losing signal and have to turn on and off to get signal back

Becoming an issue which is very annoying.

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

Airport Keeps Losing Signal!!!

Hi every body!
I'm using a powerbook and a Ibook and i've just installed Apple remote desktop 2.2 but when i'm using it to manage one of my computer.....the airport of the two PWB an IB keep losing signal and i have to reconect it for lots of times.
Does anyone know what happen with it?If you're having the same problem,please share it.....any help would be appreciate.
ibook G4 8oomhz 640mb Mac OS X (10.4.3)

First try a channel change on the base station to see if you are experiencing interference.

Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!

Hi, problem occurs when I'm clicking a button or a new url on the current site. For instance, when i clicked that "Ask This" button on this web site, It redirects me to the default homepage. I cant go back and I'm losing the previous web site HELP PLEASE!

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

HT203977 After Update my phone from IOS 7 to 8 . m phone become really bad losing signal all the time now i did update to 8.1 and still losing signal appearing gprs on display at place of 4 g or 3 g and the needs turn to Airplane mode and come back to

After update my Iphone 4 s to ios 8.1 this device keep losing signal from 3 G and wifi , to fix that is necessary to me turn on and off airplane mode ,
How can i fix this mess from Apple ios 8.1 ??? I do not have this problem before when was ios 7

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

Losing smart camera connection when using web server on NI1762 smart camera

Hi
I am using 2 smart cameras ( old NI1762 and the new NI1772) with Vision builder 2011 .
I am trying to find a way to retrieve data and image to a Visual Basic 6 application. i could not find an elegant way to do it , so instead , i am sending TCP command to the smart camera as an input and the smart camera send me back a TCP command a as an output. by this way i could communicate with the smart camera . For transferring images I could not use the TCP step , so I turned on the smart camera web server to get the image by a browser Object . But the problem is that everything is going well with the TCP, but when I turned on the web server and try to communicate with it, sometimes I loose the connection with the smart camera. That is happened with the 1762 smart camera. But when I use the NI1772 it rarely happed.
Please help me. is there any other elegant way to communicate with the smart camera , and if a TCP and web server is a solution , Why the NI1762 web server is not stable ? Why i am losing the connection when browsing to the inspection page???
Thanx

Previous versions of Vision Builder had a COM library that you could use from Visual Basic 6 or other environments and talk over the network to a Smart Camera running Vision Builder AI and control its execution just how you are requesting. In more recent versions, this has been replaced by a native .NET and LabVIEW-native API that is much more fully featured. Unfortunately, I do not think the older COM mechanism is still available/supported (but I certainly could be wrong...).
However, one avenue you may wish to persue would be to call into the .NET interface from Visual Basic 6. Microsoft designed .NET to allow COM interoperibility in both directions (.NET can call into COM libraries and COM libraries can call into .NET). Take a look at the following document from Microsoft:
http://msdn.microsoft.com/en-us/library/zsfww439(v=vs.85).aspx
You could then look at any of the .NET (C#) examples to get an idea of the API:
C:\Program Files (x86)\National Instruments\Vision Builder AI 2011\API Examples\dotNET Examples
Eric

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

Help! When I try to reinstall CS6 Design and Web Prem i get message that my serial number is invalid

When I try to reinstall CS6 Design and Web Prem i get message that my serial number (Design and Web Prem <serial number removed>) is not valid? Why???? I have it installed now on just one computer only. It was installed also on a computer and a laptop. The laptop crashed and couldn't restart anymore. I had to through it away. After that I installed on another computer at a place where I work sometimes with photoshop. Then suddenly I got message at my computer home that the serialnumber is invalid. I installed for the time an try out version, and now I have deleted the version that I had on the computer but when i want to reinstall my legal bought version with the serial number that i mention there, I get again the message that my serial number is invalid. But now it is only installed on 1 other computer. If I check the sites, I have to contact Adobe but I don't know how. The link does not work and I cannot find any phonenumber.!!

If you had it on a laptop that crashed and you threw away, it is still considered as activated on that machine. YOu should contact Adobe by chat or by phone and have them deactivate for you.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/
If you are getting a message that indicates the serial number is not valid, you should look thru the following:
Error "The serial number is not valid for this product" | Creative Suite
http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

Error in WEBI report and MDXTEST when using Dimensions in Prompt

Hi,
I am using BOXIR3.1 SP2, SAPBI 7.0
I m creating a webI report (Universe is on SAP BI Query.) which include following objcets in Query section of WebI pannel:
Business partner, Account Class, Total Arreas count.
The Condition pane of Webi Includes Prompt on object "Account Class".
When I run a report, I get List of values for Dimension Account Class, when I select one of available value eg: Commercial Customer,I get Following Error.
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] } ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS, { [Z_FCACTBP__0UCACC_CLAS].[Commercial Customers] } ) ON ROWS FROM [ZFC_M07/Z_FC_M07_Q002] failed to execute with the error Value Commercial Customers for characteristic Z_FCACTBP__0UCACC_CLAS unknown. (WIS 10901)
I tried running same query in MDXTEST editor of BI. I got same error!!!
Then I tried changing the MDX Query as:
SELECT { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] }
ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS, { [Z_FCACTBP__0UCACC_CLAS].[COM] } ) ON ROWS
FROM [ZFC_M07/Z_FC_M07_Q002]
Then it worked Fine!!! If you observe the change is in the value of Prompt Account Class [Z_FCACTBP__0UCACC_CLAS].[COM]
By default Dimension object in Universe shows text value, but when I changed the MDXQuery with Key value (This is one of the value of value is for [Z_FCACTBP__0UCACC_CLAS].[Level01] object in mDX test Editor.) It works fine.
I wonder How do i solve this problem!! List of values available in dimension cannot be changed at universe level.
Please let me know if any solution for this exists.
regads,
Nisha.

Hi Ingo,
I am creating the prompt on the dimension "Account Class" at WebI level.
The Technical name of this object is: [Z_FCACTBP__0UCACC_CLAS].[LEVEL01]
Also,
I confirmed that Index Awareness is applied on this dimension as [Z_FCACTBP__0UCACC_CLAS].[LEVEL01].[TECH_NAME].
This Dimension has detail object called "Account Class (Key) "and "Account Class (Medium name)".
MDXtest editor in SAP, shows me text as well as [ Level01] values:
Eg: Account Class InfoObject has values "Commercial Customer " (This is text value)and "[Z_FCACTBP__0UCACC_CLAS].[COM]".
COM Refers to Commercial Customer .
So In WebI when I use Dimension "Account Class" as prompt, I get Text value of this InfoObject which is "Commercial Customer ".
and MDXQuery Fails. But when I modify this query in mDXTEST Editor with value as "[Z_FCACTBP__0UCACC_CLAS].[COM]", It work fine.
I donu2019t understand the reason, since this problem is with almost 90% of Dimension object.
When I delete this object from universe, and refresh the universe then webI works fine.
But, if for some reason I refresh the universe again, the Dimension object as a prompt doesnu2019t work!!!
This error occurs every time I refresh the universe.
We are in UAT phase and soon to go Live!! We cannot afford to delete the object every time I refresh the universe.
Please let me know your inputs.
regards,
Nisha.
Edited by: Nisha Makhija on Oct 15, 2009 4:56 PM

HT1766 I lost my IPhone 4S this morning and want to increase my cloud storage so I can back it up when it finds a signal and then remotely erase it...I'm assuming the worst that whoever finds is will not callme or want to return the phone

I lost my IPhone 4S this morning and want to increase my cloud storage so I can back it up when it finds a signal and then remotely erase it...I'm assuming the worst that whoever finds is will not call me or want to return the phone. I went to icloud but it only govers me options to increase storage from my iPhone or a synced computer (mac or PC).

If the phone is offline there is no way to track it or send a message to it. You can place it in lost mode to lock it and send it a message (see http://help.apple.com/icloud/#/mmfc0f0165), but this will not take place until the phone goes back online, if it ever does. If it does, you will get an email informing you.
You might want to read this: http://support.apple.com/kb/HT5668.

Losing signal and web when on 3G

Similar Messages

Maybe you are looking for