Losing some capabilities with an iPod update??

Has anyone encountered this before. I have the 60 gig iPod, purchased last fall when they came out. It worked fine, including using it as a hard drive to store photos and video from my Sony H1 digital camera. Last week I downloaded the latest iPod updater and on the weekend discovered that the iPod no longer works with the camera. iPod gives me the message that "no card is inserted" when hooked up with the camera.
Needless to say that I am ****** off that an iPod update has altered my iPod's capabilities in this way. Now I guess I will have to restore my iPod and avoid any "updates" in the future. Way to go Apple.
iMac G5 20 1.8 GHz - 512MB Ram Mac OS X (10.4.1)

. Now I guess I will have to restore my iPod and avoid any "updates" in the future.
Better yet, simply sell the iPod and you will have no more hassles from Apple.

Similar Messages

Unable to sync some apps with my ipod

I am unable to sync some apps with my ipod touch

See:
Identifying iPod models
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

I am facing some problem with my ipod videos

I am facing some problem with my ipod videos

Because many apps are not compatible with your old device
To more easily find compatible apps:
iOSSearch - search the iTunes store for compatible apps.
Apple Club - filter apps by iOS version.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got extra money to spend..

Just what happens when the restore does not complete?
Error message?
Does it freeze? Is so what is listed in the status bar of iTunes?

Trouble with latest iPod updater

When i downloaded and opened the latest iPod updater, it says "Error reading setup initialization file" and i press ok and it quits. Anybody else having this problem or know how to fix it?

it's probably not because of the ipod updater.
they have nothing to do with eachother.
but considering, delete the updater.
see what happens.

I need some help with my ipod-the screen is frozen on do not disconnect

this morning i went to sync my ipod with itunes to update it but when i plugged it in to my computer it said do not disconnect but the screen froze before it even connected to itunes.... now the screen is frozen on do not disconnect and the ipod won't even turn off. anyone have any suggestions?

Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

I have been having some issues with my iPod touch. I can't transfer songs that I have purchased on my iPod into my iTunes library. Please help!

I have been having a lot of issues with my iPod touch. Whatever I purchase on my iPod I can't seem to transfer it to my iTunes library. If something should happen to my iPod, I wouldn't want to lose all of the music I have purchased. I can't upgrade it either because a box pops up that says everything will be erased from my iPod... I need help!

Might be an authorization issue in iTunes. Try deauthorizing your computer through the Store menu at the top of iTunes and then authorizing it again. Once that is done try transferring purchases from the iPod Touch.

Problem with my iPod updating

I hope this is a "How to Use" problem. I can't seem to update my iPod like I usually do. I'm getting relaly frustrated.
heres what I normally do:
Right click and open a song.
it is now in my library.
Open all the new songs I want to update.
Update iPod.
Done.
now, when I have my library of songs, and go to update my iPod as usual, it just says "updating iPod, do not disconnect" as usual, but it only take a few seconds and says it is complete, ok to disconnect. What the? No more updating song # x of XX amount? And my list of songs on "defaults iPod" is empty, while I'm using 1.2 mb, 1.82 gb free?
Up until now the iPod has been pretty handy, except for the scratches (I treat it nice)
Now I'm beginning to see what a joke it is. Creative zen micro looks good I think?
Help please.

Hi,
Is your library always full or do u manually load all your music to itunes and then delete? Because your problem sounds to me like you delete all your library songs after you upload your ipod.
From next time do this:
1.Go To iTunes
2.Click your library
3.click "file"
4.scroll down and click add file to library
5.select all the songs you want to download
6.and then click open
If you do that i dont think you will have any problem of disappearing songs.
If u like me dont forget to vote for me (lol)
Good to hear u treat your iPod Nano nice
If you are so arrogant i think creative zen is good for you
Good Luck With The Nano,
Shreyas

Photogene App crashes with some photos with iOS 8 update, not others when in edit

SInce the iOS 8 update some when I select a photograph or when scrolling pictures in an Album, the App crashes. This never happened before this new upgrade. I've used it for months. Any help appreciate. With certain pictures, no problem. I make personal cards for printing and this app has been great until now. I go into one album, scroll, select a photograph p, work in it, no proble. I move to another Album, and whil scrolling it crashes, repeatedly.. This app replaced the iPhoto App as that one was multiplying pictures like rabbits and alleged fixes and visits to the Apple Store did not solve the problem. The Appke Store personnell were great but no one could fix that issue. I deleted it. Many, many others everywhere had that similar problem. Any help with this crashing problem is appreciated.

Thank you, Ralph, for your reply. I'm a practical person so I tried trial and error. It was recents ans larger Albums that the Photogene crashed. I could make a card from my smaller Albums. So I transferred a few photos from the ones that crashed to the successful Album(s). I could edit, put Text, save, export to my library, e-mail and post on FaceBoo. That worked for me. A round about way, but it works. Again, thanks.
Dan

[SOLVED] Need some help with binaries move update/upgrade

I'm a bit stumped by the upgrade instructions consequent on the decision to move things into /usr/bin and would like to ask some advice. First, I do get output from the command
pacman -Qqo /bin /sbin /usr/sbin | pacman -Qm -
. The short list of files is
grub 0.97-21
gen-init-cpio 2.6.36-1
grub 0.97-21
lilo 23.2-3
gnome-cups-manager 0.33-6
lilo 23.2-3
tcp_wrappers 7.6-12
The first problem I have is how to "fix," as the directions stipulate, this situation. Does "fix" here mean manually moving some binaries to /usr/bin? Removing those packages (none of which I currently use) via pacman?
I'm pretty sure I don't have any packages installed from non-official repos on this system, so I'm skipping the step that describes what to do in that case. The third command, i.e.,
find /bin /sbin /usr/sbin -exec pacman -Qo -- {} + >/dev/null
returns no results, so I should be ok there.
Input will be appreciated.
Last edited by jamtat (2013-06-06 01:40:13)

I've run into a hang-up. It's true I wasn't running systemd on the laptop, so I took the steps outlined on the wiki to make the system do that. Then I removed the packages from the laptop that might interfere with the upgrade and ran
pacman -Syu --ignore filesystem,bash
per instructions. That resulted in a whole lot of updates/upgrades to the system. But then, when I went to run
pacman -S bash
, I got a failure: the system lost its wifi connection (to date managed by wicd) and I cannot get it to connect now. Even worse, it won't even go online through the wired NIC: it gets and IP, but no network traffic is traveling to or from the laptop. I don't think it will be a good idea to reboot the system without first upgrading bash, will it (the old bash won't know about the location of key binaries, correct?)? Suggestions about what to try next?
Last edited by jamtat (2013-06-06 00:07:58)

Need some assistance with dynamic database updates done through a loop

In the part of my application that I'm currently working on
I'm trying to dynamically update a local database every time a
change is made to the dataProvider(ArrayCollection) when a dragDrop
action is done. After doing some more research I found that the
update "function"(my trace placeholder) is fine where it is, the
problem is that it is firing the insert function for each and every
row every time something is dragged onto the datagrid essentially
cloning all the entries in the database while updating the original
items. So I've narrowed down my problem to figuring out how to get
the insert function to fire only once for new items and skipped
when updating items. The database is a local as this is an AIR app,
I'm posting this here since I feel this is more of a flex issue
than an AIR issue. I've already tried adding an else clause to the
if statement but that doesn't work along with else if. Thanks in
advance.
Here's my code so far:

Ok, one thing I'm going to try today is this; essentially I'm
going to
say, "forget that for-loop, just let it update the
dataProvider". What
I'm going to do is write another function that runs each row
of the dp
through a filterFunction and checks to see if it is there or
not, if
it is there, then update the editable values, if not, then
insert a
new row. Since this would be invoked after the dataProvider
update, I
may just save it until the user closes the window in any way
and then
run this as a save and quit function. It would also help to
be able to
have it available in a button.
If anyone has a better idea on how to do this, don't hesitate
to tell me.

Can i have some help with my ipod please?

Okay so around a year ago i dropped my ipod and the screen shattered but it's not too bad so i didnt get it fixed but around a month or so ago my power button stopped working but it's not really a problem because i use that circley thing now that sits on the side of your screen. Two days ago i snced my ipod (touch gen4) and when i opened my music app i only hadd around 200 songs when i have like 900 listed on my itunes my itunes didn't say that it wasn't able to sync any and now whenever i open my music app it just plays random songs for like 2 seconds each. please help me
p.s im up to date with everything my itunes is up to date and so are all my apps and ios

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price

Ok I need some help with sync ipod.Do I need to uncheck apps after sync is comple

Ok I'm new to all of this.We have dial up internet so we use local wifi at a cafe.We purchased some games and songs last night and today connected the ipod this morning to charge and it started syncing,took a while but it added the music to the library and the new game apps to the apps.Now In itunes at my devices "ipod" and selecting apps,the top box is checked "sync apps" and all the new apps under sort by kind are checked,in purchases there is a check by all the songs we purchased.Do I need to uncheck the apps and songs before disconnecting the ipod? I don't want to delete anything from my ipod the next time I sync it.I someone could please explain.Thanks so much

wendyfrommullins wrote:
Super,so after syncing is complete just leave everything alone and disconnect the ipod after charge is complete correct? ....
Correct...
wendyfrommullins wrote:
... So If I want to remove a newly added app just uncheck it
Yes...

Could use some help with my ipod

Well my sister got a video ipod so she didn't want her ipod so i figure hey what the heck give me it .Anyway i got this charger but no way to use it how do i charge my ipod
http://i12.ebayimg.com/05/i/06/65/01/38_1.JPG
What plug goes into that or can i charge my ipod with the same plug used for transfering songs or no.

Try this:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/StoreReentry. wo?productLearnMore=M9837LL%2FA
it should work better then a firewire cable or try this:
http://www.radioshack.com/product/index.jsp?productId=2191864&cp=&kw=ipod+alarm& parentPage=search
It is awesome it charges your ipod, plays your music, and has an alarm clock in it that can play to your music and it has a fm/am radio in it. Buy it it is worth the $money$
David

Syncing Issues with newest iPod update

I was trying to put music onto my iPod touch (4th gen. iOs 5.0.1) when the autofill feature started to add a ton of music that i did not want. I stopped the autofill feature but when I tried to add the music manually I was not allowed to do so. I dragged the highligted album over the iPod icon and dropped the music into the iPod. All seemed normal for a split second but the music was never added. What is going on and how can I add the music? Can I turn off the auto fill feautre?

Welcome to Apple Discussions!
1) Make sure you are removing the volume limit (so there isn't one) See here...
Setting the maximum volume limit on iPod
2) Make sure EQ and/or sound check are not enabled/weren't enabled before and are now not enabled. Set them if you like. Sound check may lower the volume of some songs.
On your iPod go to settings-->sound check. Make sure it is off.
Also, go to settings--EQ on your iPod. Make sure that is set the way you want it.
btabz

Losing some capabilities with an iPod update??

Similar Messages

Maybe you are looking for