Losing speed dial & can't get ringtones to work
Hello,
I have a N95 that I seem to be having some issues with. The first is when I plug it into my computer and sync it with outlook it loses all of the speed dials as well as the associated ring tones with my contacts.
Speaking of ring tones, I can only seem to get just one to work; when I attach them to my other contacts the phone just rings with the main ring tone. Only one seems to work correctly.
Any help would be appreciated!
Well, I found another thread that said to reset your warnings in your account, but don't do that. I was able to sign in before, but now I get the same thing you are getting, sign in over and over. itunes 7.6 is obviously very buggy and needs a fix.
Similar Messages
-
Can't get ringtones to work!
I really don't want a ringtone on my iphone but I tried to use the feature and simply can't get it to work. When I click on the bell in my library (already have purchased songs) I get asked for my password. I enter my password and then it asks again and again and again....
Now I can buy songs via itunes without this problem. I saw some people with the same issues however I didn't see any responses. Anyone come up w/ anything?
-dWell, I found another thread that said to reset your warnings in your account, but don't do that. I was able to sign in before, but now I get the same thing you are getting, sign in over and over. itunes 7.6 is obviously very buggy and needs a fix.
-
Can't get ringtones to work on my iPhone 4 :(
I own an iPhone 4 and am trying ot put ringtones on it. I don't have a ringtone tab on my itunes so the online tutorials haven't benn very helpful. can someone link me a walk through on how to make a ringtone from a current song I have in my iTunes library? Keep in mind I"ve found hte ones that assume I have a ringtones tab which I don't so I think it's from a few years back.
Here is a screen shot of my itunes so you understand I have no ringtones tab.
[IMG]/___sbsstatic___/migration-images/123/12369650-1.jpg[/IMG]Here is a video i made of me attempting to add a ringtone. As you can see with me taking screen shots and videos of this problem I really really want to figure this out.
[IMG]http://i57.photobucket.com/albums/g211/digitronical/th_helpme.jpg[/IMG]
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid57.photobucket.com%2Falbums%2Fg211%2Fdigitronic al%2Fhelpme.mp4"> -
Can't get ringtone to sound.
What troubleshooting steps have you taken so far?
For example, have you looked at your Ringer/Silent switch yet? -
When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose my apps and photos!
Help would be much appreciated!If you are getting the connect to iTunes screen then it's too late to take a new backup and/or copy anything off it. Prior to starting the update did you take a backup, either to the cloud and/or to your computer's iTunes ? If not then have you recently taken a backup that might have your photos and apps content/settings in it ?
As long as the apps are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app (and the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes), and if the apps store their content on a server/cloud service then you might be able to get their content back from that - if they store their content on the device then you will need to have a backup.
For our photos you could try doing a search for programs that claim to be able to recover content from a device - I haven't used any so I can't suggest one. -
HT4528 just bought a ringtone app but can not get it to work
just bought a ringtone app but can not get it to work, I can get to putting on my desktop but after that it wont tranfer to my "tones"
AngelaContact the app developer for support.
-
Cisco 1812 wireles setup, can't get it to work
Hello everyone,
I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.
I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):
ip cef
ip tcp synwait-time 10
no ip bootp server
ip name-server <removed>
ip name-server <removed>
crypto pki trustpoint TP-self-signed-1358229530
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1358229530
revocation-check none
rsakeypair TP-self-signed-1358229530
crypto pki certificate chain TP-self-signed-1358229530
certificate self-signed <removed>
quit
username <removed>
bridge irb
interface Null0
no ip unreachables
interface FastEthernet0
description $ETH-WAN$$FW_OUTSIDE$
ip address extip extsubnet
ip access-group 101 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip inspect sdm_ins_in_100 in
ip inspect SDM_MEDIUM out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
interface FastEthernet1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
shutdown
duplex auto
speed auto
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation hdlc
ip route-cache flow
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Dot11Radio0
description 802.11g
no ip address
encryption mode ciphers tkip
ssid <removed>
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 <removed>
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
description 802.11a
no ip address
shutdown
encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key
encryption mode wep mandatory
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Vlan1
description $FW_INSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
bridge-group 1
interface BVI1
ip address <internal router ip> <subnet>
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 <external router IP> permanent
ip flow-top-talkers
top 5
sort-by bytes
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
<bunch of static nats>
<access rules>
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 <removed>
transport input ssh
scheduler allocate 4000 1000
webvpn context Default_context
ssl authenticate verify all
no inservice
endOkay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.
Either that or my WPA-PSK configuration is broken.
I switched over to an open network with no encrpytion and everything works now. -
My MAc book pro 5.5 is mid 2009, Processor speed 2.26 GHZ MacOS X VERSION 10.68 Leopard. My Tv is a Panasonic Plasma smart TV TC-P50ST60. I ordered from Amazon a Toslink optical mini to Toslink optical digital cable meant for Macbook pro 2009 forward. I changed the settings on both TV and Mac but I still can't get audio to work on TV. I believe my Mac can't see the audio output from the TV. Any advice with step by step instructions on how to fix it? could it be they sent me defective cables? Thank You for your help.
When I spoke with Apple I made sure I told them that my Macbook Pro was Mid 2009 and he ensured me again that those to cords will work. I realize that with the newer models it does put through both sound and audio but because of my model I don't think it does obviously because I have played with both Sound on my computer and Sound on the TV and nothing works. Sometime Apple can be good but man some people lol he even told me he verified my computer model on the computer and that's what came up.
So new question would be what kind of cable would I be looking for to get audio? Anyone before I call back to Apple and see what they say hahah -
Using airport extreme in china - can't get it to work
I just moved to china and have been trying to set up a new Airport Extreme dual band to my high speed internet connection but can't get it to work (bought the AE in the US and worked fine there). I have a Green light on the physical AE, and in Network Status section under Network Diagnostics I get green lights on Airport, Network Settings and ISP, but yellow/red on Internet and Server. The type of internet connection is direct, supplied by China Telecom with no router/modem in my unit, but with ethernet cable running directly to the phone room connection. I manually set up the AE using the same IP address, subnet, DNS as shows up when I plug the ethernet cable directly into my computer, with the internet working fine with a direct connection to computer and no AE.
What you did makes complete sense Mike, but if you don't have access to the router you may have to get your ISP to recognize your Extreme's MAC address:
AirPort Base Station: ISP provisioning may prevent Internet connection via broadband (cable or DSL)
For example: Suppose that you have a computer connected to a cable modem before purchasing an AirPort Base Station. Your Internet service provider might recognize your computer's MAC address as the correct one for your account. Your new base station then takes the position on your network that was formerly occupied by your computer, but you have not taken any action to let your Internet service provider (or its hardware) know the new address. The base station then sends packets to your Internet service provider that do not contain the required MAC address, and the packets are ignored.
It may be as simple as leaving everything disconnected from your service provider for a period of time. You might also try turning Connection Sharing "off" (bridge mode). -
Can't get VPN to work on RV220W
I am a home office user who bought a RV220W router for the speed advertised on smallnetbuilder. I am trying to set up the VPN but can't get it to work with the Quick VPN client. I am using dyndns to manage the dynamic IP and have entered that into the setup noted below. I can access the router remotely (remote administration) when enabled using the dyndns address so I know that is working.
IKE Policy Table
General
Policy Name: krafty001vpn
Direction / Type Responder
Exchange Mode: Aggresive
Enable XAUTH Client: None
Local Identification
Identifier Type: FQDN
FQDN: krafty001.dyndns.org
Peer IKE Identification
Identifier Type: Remote Wan IP
FQDN: krafty001.dyndns.org
IKE SA Parameters
Encryption Algorithm: 3DES
Authentication Algorithm: SHA-1
Authentication Method: Pre-Shared Key
Pre-Shared Key: xxxxxxxxx
Diffie-Hellman (DH) Group: Group 2 (1024bit )
SA-Lifetime: 28800 Seconds
VPN Policy Table
Add / Edit VPN Policy Configuration
Policy Name:
krafty001vpn
Policy Type:
Auto Policy
Remote Endpoint:
FQDN
krafty001.dyndns.org
NETBIOS:
Enable
Local Traffic Selection
Local IP:
ANY
Start Address:
End Address:
Subnet Mask:
Remote Traffic Selection
Remote IP:
ANY
Start Address:
End Address:
Subnet Mask:
Split DNS
Split DNS:
Enable
Domain Name Server 1:
Domain Name Server 2:
(Optional)
Domain Name 1:
Domain Name 2:
(Optional)
Manual Policy Parameters
SPI-Incoming:
SPI-Outgoing:
Encryption Algorithm:
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Key-In:
Key-Out:
Integrity Algorithm:
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
Key-In:
Key-Out:
Auto Policy Parameters
SA-Lifetime:
3600
Seconds KBytes
Encryption Algorithm:
3DES None DES AES-128 AES-192 AES-256 AES-CCM AES-GCM
Integrity Algorithm:
SHA-1 SHA2-256 SHA2-384 SHA2-512 MD5
PFS Key Group:
Enable
DH-Group 1 (768 bit) DH-Group 2 (1024 bit) DH-Group 5 (1536 bit)
Select IKE Policy:
krafty001vpn
Quick VPN Setip
User Profile: homevpn
User Name krafty001vpn
Password: xxxxx
Server Address: krafty001.dyndns.org
Port for QuickVPN: Auto
Any help in identifying what setup component I have configured incorrectly would be appreciated
ThanksI am not sure this will help but make sure the following is set correctly:
Currently VPN is somewhat broken on all versions of firmware of the RV220W including beta where VPN will ONLY negotiate on 443. If you are port forwarding 443 to a server or something else it will fail. You must allow the VPN to authenticate on 443. The router SHOULD be able to connect on 60443 as indicated on the QUICKVPN software however it doesn't this has been confirmed by a CISCO engineeer I have been speaking with regarding my VPN woes. Currently there is NO ETA on this fix.
But since you didn't mention if your 443 ports were being routed elsewhere I figured i would lay out that information here incase you where. Also I strongly recommend contacting Cisco Support for the beta firmware it makes the RV220W much better.
Also the reason for the update to the beta firmware it resolves the hair pinning problem which could also lead to VPN issues. -
After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I. We are able to do video chat through gmail, but I had hoped to use iChat. I am using OS 10.6.8, iChat v. 5.0.3. What am I missing?
HI,
iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
However it will not Video to the Web Page login to iGoogle or the Web Mail Page login. (where people can Google Chat as it were in a Web Browser).
Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
More on this here This article has been changed several time in the recent months. It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
It could be Internet speed but at this stage I would doubt this at this stage.
10:27 PM Saturday; January 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Have entrourage and want to use Mail. Can't get it to work.
I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage.
I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
I am on Charter.net at my office and sbcglobal.net at home.
How can i get this to work. I can receive on Mail, but i can't send.check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption. Verify the setting from your old machine setup.
-
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
-
HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?
I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???
If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao. -
Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.
Hi,
Is there an iPhone involved ?
If not, what happens if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
Is the Apple ID linked to an iCloud account ?
In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
9:14 pm Friday; April 11, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Maybe you are looking for
-
How to show a message in a query BI7?
Hi everybody, In BI7, I need to show an error message that the selection screen of a query to after checking a variable. I tried the following in the code of customer exit for variables (step 3): 1. Put "MESSAGE E899(bd) WITH text-008" but after show
-
Hi all, I have read what has been said o nthis topic on the boards. I have my Apple TV with an optical out and HDMI out both going to a receiver. I can switch receiver HDMI outputs (watch a show on tv) with the Apple TV sound still working. Howeve
-
Output noise - can't find the source of it
I opened up a project that I hadn't worked on since I switched from a G4 to an iMac. I'm getting a dirty white noise, almost like I have a guitar plugged into an input. If I mute all tracks its still there on the master fader, you can see the activit
-
ESS MySAPERP 2004 - Date format
Hi , We did install ESS in North America, and the date format without changing anything is <b>MM/DD/YYY</b> in the "Personal Data" or "Travel and Expense" Installing Europe now , they need the date format to be <b>DD.MM.YYY</b> We did try the change
-
New Captivate 5.0 User - Powerpoint Question
I have a Powerpoint 2003 presentation that I have been asked make into a Captivate 5.0 presentation for posting on a website. Normally I talk throughout the presentation and click to advance the slides and make animation objects appear and disappear