Losing sync while exporting
I have a series of 1-2 minute clips I'm having trouble exporting. They were shot, captured, and edited on HDV. When I go to export them using Quicktime conversion, the audio plays fine but the video will frequently skip. It goes in and out of sync several times during the minute long clip and is completely unusable. Are there any settings I can change to prevent this from happening?
This is what an eye your more recent image looks like at full resolution, which to me looks less than optimal. The skin and hair is overly smoothed and there is a halo of overly sharp pixels along edges. The grainy image in your first example looks much better to me because the hairs and skin details are visible. You should be using 1:1 zoom when doing the detail work.
Here is the "Original" size of your more recent image:
All sizes | Monarch Celebration Portrait | Flickr - Photo Sharing!
Similar Messages
-
Audio losing sync when exporting to .mov
I've been using Flash for a while now, but I'm still very much inexperienced with exporting .mov files, and this is the first time I have tried to export a large project that contained audio. The problem is that the audio plays faster than the animation, and is very much out of sync by the end, with the audio playing several seconds before it is supposed to. I have tried every setting I can think to change, and tried rendering the same .swf file in After Effects. However, in After Effects, even when I make sure to have audio in the output, the rendered video had no sound. All sound on the timeline is set to stream and not event.
Any help is appreciated. I honestly don't have much of a clue what I'm doing.1.If you have placed your audio on the timeline, make sure you put everything to stream.
export a large project
2.Make sure your computer has a lot of processing power: playing and recording at the same time requires a lot of RAM/CPU, look for idle processes and shut them down.
3.If nothing helps, record Audio/Video seperately and match them afterwards in AfterEffects/Premiere
4.Flash has a maximum amount of frames it can handle (16000 := 10 Minutes), if your project is getting near to that limit, try dividing your project. -
Losing sync when exporting to tape
My audio is in sync on my timeline but the output drifts out of sync when printing to tape and when simply playing off the timeline to tape (both via firewire). In other words, my computer playback is dead on but my tape is dead wrong. My sequence and clips are 16bit and 48. The deck is set to record 16 bit. As far as I know the footage was captured at 16/48.
The video clips were drifting out of sync on my timeline but I exported it as a Quicktime and I pasted that into my timeline.
Any suggestions? Thanks.1.If you have placed your audio on the timeline, make sure you put everything to stream.
export a large project
2.Make sure your computer has a lot of processing power: playing and recording at the same time requires a lot of RAM/CPU, look for idle processes and shut them down.
3.If nothing helps, record Audio/Video seperately and match them afterwards in AfterEffects/Premiere
4.Flash has a maximum amount of frames it can handle (16000 := 10 Minutes), if your project is getting near to that limit, try dividing your project. -
FINAL CUT EXPRESS 4.01 - losing quality while exporting to file
Hey guys,
I'm dealin with a basic problem, which has been probably reviewed before, but just wanted to present my personal issue with it, and wonder if anyone could help me with this.
I shot clips with Canon 550d (1920x1080 30fps) and then converted them with Mpegstreamclip using Apple Intermediate Codec to 1280x720 30fps (however which also concerns me, in the browser i can see that they're 1280x720, but on the timeline after clicking Item properties, they are clearly 1920x1080). Easy Setup is set to HDV-Apple Intermediate Codec 720p 30 (maybe that's the part i'm doing wrong).
The thing is, it looks perfect, sharp and smooth on the canvas, but after exporting it loses it's depth of colours and sharpness etc.
Settings I'm using for exporting are those suggested f.e. by Vimeo site:
Compression: H264
Frame Rate: Current
Key Frames: every 30
Data Rate: limited to 5000kbps
Size: HD 1280x720 16:9 (tried also with 1280x720 HD but seems the same naturally)
Frame Reordering - ticked (it's done automatically, should i untick it?)
Mac details: Mac OS X 10.6.8, 2 GHz Intel Core 2 Duo / 2,5 GB 667 Mhz DDR2 SDRAM
You can check the result here:
http://vimeo.com/32730130
or
http://www.youtube.com/watch?v=UsEednjpcQk&hd=1
I'm really looking forward to any tips that can help. Thank You very very much:)Use *MPEG Streamclip* to convert the MPEG2 files to QuickTime using Apple Intermediate Codec. However, if you shot 4:3 video then you may have to convert the video to QuickTime using Apple DV/DVCPRO-NTSC instead of Apple Intermediate Codec. These are selections you make in MPEG Streamclip. (Your camera can record video as 4:3 or 16:9 standard def but there is precious little information about its 16:9 mode. You may have to play around with some of the settings in MPEG Streamclip.) Once you have converted the files, you will import the converted files into FCE (FCE > File > Import > Files).
Do note, however that you also need to have the *QuickTime MPEG2 Playback Component* installed on your Mac. You may need to buy it if you don't already have it. (Links provided in my previous post.)
QuickTime7 Pro is not the app you need to do this conversion. -
Music slightly out of sync when exporting in Premiere CS6, format problem?
Hi guys, i have a quick question.
I edited together a promo for a local band and everything is perfect in the sequence as far as being on point with the music at certain beats and such. However when I export it the music is slightly out of sync, which is bad when you edited everything specificly to the song. I am not using ANY audio from the footage but instead layed a music track over everything. I'm not sure what else to do, could it be a format problem? I am using h.264 (see below), but would AVI or anything else work better? any help is appreciated thank you!
I am exporting directly from inside Premiere CS6 using a custom H.264 preset. 24fps, VBR 2 pass encoding. Target 7MB, Max 11MB. (with render at maxium bit depth, and render at highest quaility selected.)
I put the audio settings to high, 320kbs AAC format.
I use a custom built PC with an i7-3770K, 32 GB RAM, and I exported to a 120GB SSD.
Any other info you need just ask.any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!
Also, any types for uploading to vimeo so it doesn't get out of sync there? thank you in advance!Hi,
I dont think that you will really get a problem while exporting in any of the given formats. But i would really like to check if the audio layer is exactly same as of the video. for eg - if my audio is 00:05:30 and my video is 00:05:20 , we might face issue with the sync.
We can try to put more black video to make it a match with the audio and then try to export.
Where do you have the media files , on a internal drive like c: or desktop? In case not , try to move the media files to desktop and then try to export.
Also instead of exporting the files to your 120GB SSD , try to export it on the desktop.
Hope it helps.
Thanks -
Audio and video do not sync when exporting
the audio and video content do not sync when exporting to media browser or quicktime.. at times the audio is delayed, or ahead of the video
Wow, I was just about to post something similar. I've tried 4 different times, wasted a few dvds, and tried various ways of outputting to solve this...nothing. Here's my situation;
• I have a series of stills, with music underneath...kind of like a slide show.
• That ends, both music and visual, and I go to a black screen/slug that is :22, to give some breathing room before the video that follows. Also, the audio track fades out at the end of the stills...it does not continue into the slug.
• After the :22 of black, I fade into a video. HOWEVER, everytime I've done that, the AUDIO portion of that video is starting while there's still black on screen, then when the video comes in, it's way behind.
I've adjust the audio to now end before the slug, thinking that was somehow making iMovie go wonky. Didn't work. I've wasted a few dvds before I got smart and started checking before burning. And still, everytime, that section is not syncing, but, i syncs in iMovie, where I made the video.
This is HUGELY frustrating. -
Two computers: how to sync plugin export presets?
Apologies if this question has already been dealt with, but I did not find it from the forum.
How should I deal with the following situation. I have two computers (desktop and laptop), and the desktop works as my "master". I want to copy export presets to my laptop for on-the-road work, including the presets that include settings for the export plugins (namely LR2/Mogrify and MetadataWrangler)?
I can easily deal with having identical versions of the plugins in both computers, but how to sync the export presents? Is it as simple as just copying the contents of ...\Application Data\Adobe\Lightroom\Export Presets\User Presets? Before just testing it I would prefer to hear if the solution is that simple, or if manually copying presets would mess up the LR setting on laptop?
Running Windows XP and Lightroom 2.3.
Thanks is advance.Thanks. There should not be problems with the drive-letters due to "managed" setup on both computers. Have to test if I could set SyncToy for easy copying of setting while on home network.
-
Issue while exporting report in Excel Format
Hello,
I am facing problem while exporting the report in Excel Format. After analysis, I think that it could be due to two reasons, either we are using wrong versions of Jars, or we are using wrong API. Here is the code, approaches and problems we are facing. Please help.
First approach we are using is:
// using basic API
import com.crystaldecisions.reports.sdk.ReportClientDocument;
// get client document from crystal report API and open the report by specifying the report name, with path
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open( reportPath, 0 );
// give chance to extending classes to configure the report document by POJO or by sql parameter etc, just adding the parameters infromation using ParameterFieldController
configureReportDocument( reportClientDoc, reportMetadata, reportData, reportContext );
// get data source of crystal report
Object reportSource = reportClientDoc.getReportSource();
// export the data - we have also tried with MSExcel format
ReportExportFormat exportFormat = ReportExportFormat.recordToMSExcel;
LOGGER.debug( "exportFormat[" + exportFormat + "]" );
ByteArrayInputStream byteArray = (ByteArrayInputStream) reportClientDoc.getPrintOutputController().export(
exportFormat );
Problem Faced: Specified Excel format is not supported.
Second Approach: We come to know that excel format is supported with new releases and with occa package.
Then we tried with import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument; It ask to set the ReportServer. When we are trying to set the server as
reportClientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
Application is unable to find 'ReportClientDocument.inprocConnectionString' property. It seems like we are using some old jars. However we have downloaded the latest released jars for eclipse 2.
Please help for it. Issue is to export the report in excel format, which is currently working fine for PDF. If this problem is related to Jars, please suggest the path to download the latest jars. We also looking for the latest jars like rasapp and rascore etc. But these are not available with Crystal Report for Eclipse 2 release.
Waiting for urgent help. Thanks you..
Regards,
MohitHi,
Send me Environment Details .
Here is the code snippet for exporting report to excel format:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import="com.crystaldecisions.sdk.framework.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.managedreports.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.infostore.*" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.*" %>
<%@ page import="java.util.*" %>
<%@ page import="java.io.*" %>
<%
String username ="Administrator";
String password ="";
String cmsname ="localhost:6400";
String Authen ="secEnterprise";
//connecting to Enterprise
IEnterpriseSession es = CrystalEnterprise.getSessionMgr().logon(username,password,cmsname,Authen);
//get the report App Factory form the Crystal Enterprise
IReportAppFactory appFactory = (IReportAppFactory) es.getService("","RASReportService");
//get the infostore service form the Crystal Enterprise
IInfoStore istore = (IInfoStore) es.getService("","InfoStore");
//get the report by name from crystal Enterprise
IInfoObjects iobjects = istore.query("Select * From CI_INFOOBJECTS Where SI_NAME = 'sampleramz2.rpt' and SI_INSTANCE = 0 ");
//open the report in the report doc object.
ReportClientDocument Doc = appFactory.openDocument((IInfoObject)iobjects.get(0), 0, Locale.ENGLISH);
// WORKING WITH THE PRINT OUTPUT CONTROLLER
//Use the report documents PrintOutputController to export the report to a ByteArrayInputStream
ByteArrayInputStream byteIS = (ByteArrayInputStream)Doc.getPrintOutputController().export(ReportExportFormat.recordToMSExcel);
// EXPORTING THE REPORT
//Create a byte[] (same size as the exported ByteArrayInputStream)
byte[] buf = new byte[2000 * 1024];
int nRead = 0;
//Set response headers to indicate pdf MIME type and inline file
response.reset();
response.setHeader("Content-disposition", "inline;filename=ramz");
response.setContentType("application/xls");
//Send the Byte Array to the Client
while ((nRead = byteIS.read(buf)) != -1)
response.getOutputStream().write(buf, 0, nRead);
//Flush the output stream
response.getOutputStream().flush();
//Close the output stream
response.getOutputStream().close();
%>
Let me know any information is needed,
Regards,
Rameez -
Error while exporting a table - EXP-00091
I am doing an export of a table. The table has 1000838 rows. After the export is completed,
when I checked the log - it said
Connected to: Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.4.0 - Production
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table FIDA_LABEL 1000838 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.
I looked in the Oracle error messages document and found this out ---
EXP-00091 Exporting questionable statistics
Cause: Export was able to export statistics, but the statistics may not be useable. The statistics are questionable because one or more of the following happened during export: a row error occurred, client character set or NCHARSET does not match with the server, a query clause was specified on export, only certain partitions or subpartitions were exported, or a fatal error occurred while processing a table.
Action: To export non-questionable statistics, change the client character set or NCHARSET to match the server, export with no query clause, or export complete tables. If desired, import parameters can be supplied so that only non-questionable statistics will be imported, and all questionable statistics will be recalculated.
And this how my export command looks like -
exp vincent/passphr query=\"where state in \(\'MD\',\'CA\',\'WI\'\)\" file=$EXPDIR/fida_label_9i.dmp tables=vincent.fida_label
log=$LOGDIR/fida_label_exp.log
Ofcourse, I am using the query clause because I really need to and it has always worked when we were in the Oracle 8i environment. We recently moved to the 9i. And this happens in this 9i version...
And I certainly do not want to specify the import parameters to ignore the questionable statistics as no changes are desired in that area...(my hands are tied..).
What could " a fatal error occurred while processing a table " mean? And how can this be traced and troubleshooted ? Or how can I find out if any row errors occurred ? And if required, how do I check the character sets and other likes ?? (I have no idea in this area)
Thanks. All I needed was to get around this error. Your suggesions/responses would be highly appreciatedWhat version of Oracle 9i are you using? Do you have a standard 'NLS_LANG' environment variable set on client's machines? Or do you set it to different values on different machines?
Here is one of way you could get around it.
Could you specify the export parameter 'STATISTICS=NONE' while exporting the table data?
Try this and see.
If this is successful, you could use the import utility as usual. You could always compute or estimate statistics on the table after import. -
Help needed while exporting crystal reports to HTML file format using java
Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanksthe ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM -
Data getting truncated while exporting report to a text file in crystal 10?
Hi All,
I am using crystal 10.When exporting report to a text file ,a dialog prompts asking for Character perinch with a default value 9.If I change the value from 9 to 16 i am getting the correct data(that means character per inch value is 16) and it update "CharPerInch" value in registry under following location to 16.
HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal Reports\Export\Text
The dialog asked for character per inch also has option to select not to prompt again and i also selected that in first go.
When i export the report again in text format it didn't prompt for number of character per inch but the data gets truncated.
What i believe is even though it updates entry in registry and reads, it is not using the same value for export. It never consider the value that is in registry, if the check box is not selected then it is using the value entered in the dialog and if the check box is selected then in the next run it uses the default value as 9.
Can anyone suggest me how to override this problem ? Is there any other setting place in registry where i can enter the number of character per inch.I don't want to crystal to prompt always for character per inch.Hi Venkateswaran,
The other option to avoid truncation of the data could be
Right click the text filed
Click on Format Text to open the Format Editor
On Common tab check the text box for Can Grow.
This will prevent the data from truncating in preview as well as while exporting to text.
Otherwise you will have to set the characters per inch to 16 each time. I donu2019t see changing the registry value causing any difference here.
Regards,
Aditya Joshi -
IllegalArgumentException error while exporting report in PDF format
Hi all,
we are using Crystal Report 2008, Java 1.5.22 and JRC 11.8.4.1094 to export reports in pdf format within java.
It is working fine for all reports except for a specific report where it gives IllegalArgumentException while exporting the PDF.
Below the error occurred:
12:39:16,875 ERROR [c] Disk Exporter: no output file was created by an exporter
12:39:16,875 ERROR <b> PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export
java.lang.IllegalArgumentException
at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
at com.crystaldecisions.reports.a.e.if(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
at com.crystaldecisions.report.web.event.br.a(Unknown Source)
at com.crystaldecisions.report.web.event.w.a(Unknown Source)
at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
at com.crystaldecisions.report.web.event.av.a(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
12:39:16,875 INFO [c] Disk Exporter: finalizing export to destination
12:39:16,875 ERROR [JRCCommunicationAdapter] Failed to export report
com.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unknown exception is thrown
at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
at com.crystaldecisions.reports.a.e.if(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
at com.crystaldecisions.report.web.event.br.a(Unknown Source)
at com.crystaldecisions.report.web.event.w.a(Unknown Source)
at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
at com.crystaldecisions.report.web.event.av.a(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
Caused by: java.lang.IllegalArgumentException
at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
... 56 more
Have an idea?
ThanksHello Andrea.
I searched through the SAP Notes for the error that you are encountering. There is an SAP Note that exists titled the following:
1332907 - Report being exported to PDF format using the Crystal Reports for Eclipse 1.x runtime, errors with the exception: PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob
Since you may not have access to the SAP Notes, I will extract the details that are mentioned in the note here:
=============================================
Symptom
Attempting to export a report to Adobe PDF format using the Crystal Reports for Eclipse 1.x runtime results in an exception.
The exception indicates "PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob"
Environment
Windows 2003
Apache Tomcat 5.0
Crystal Reports for Eclipse version 1.x
Reproducing the Issue
Using the Crystal Reports for Eclipse runtime version 1.x attempt to export a report to PDF format that has the "Repeat Group Header on Each Page" option enabled.
Note: This does not occur if this option is enabled in a subreport.
Cause
When the "Repeat Group Header on Each Page" is enabled for a group in a main report the Crystal Reports for Eclipse 1.x runtime is unable to correclty format the PDF document which results in an exception.
Resolution
Updating the application to use Crystal Reports for Eclipse version 2.x runtime will resolve the issue.
The most recent updates to the Crystal Reports for Eclipse runtime can be freely downloaded from the SAP SDN Website.
http://www.sdn.sap.com/irj/boc/crystalreports-java
=============================================
Since you are on JRC 11.8.4.1094 which is Crystal Reports for Eclipse 1.x, this may be the cause of your problem.
I hope that this helps.
Regards.
- Robert -
Issue while exporting report to excel
I have a report created using ssrs.
In that i have set the body background property to an image
And also set a header in the report
Now while exporting it to excel, I need to remove the body background image and header
Need Help
Thanks
AbhinavThe workaround is to use a parameter that control the hidden properties and image/value properties of the header contents and background image path respectively. We need to place the header contents to a textbox or a rectangle so that the "hidden"
properties can be set or reset. Similarly for the image path or value properties of body section can be set or reset using expression. I am using external image URL. Refer below step.
1. Add a parameter "Export". Set the Available values
as "Specify values" and add the below labels and values.
Label Value
Header/Image Header/Image
No Header/Image No Header/Image
For Default Values,
Select Specify values option and add value as "Header/Image". Click Ok to close the parameter properties.
2. As my header section contains a textbox and wanted to hide while i export, select the textbox properties and set the visibility/hidden expression as, =IIF(Parameters!Export.Value <> "Header/Image", True, False)
3. Similarly in the report body properties, select the image source option as "External" and set the expression as,
=IIF(Parameters!Export.Value <> "Header/Image", "" , "http://localhost/Testing/NEW_06.jpg")
4. Preview the report and select the export parameter option as "No Header/Image".
Regards, RSingh -
Issue while exporting report in PDF using crystal report XI
Hello,
I am facing issue while exporting a report to PDF through crystal report XI. Reports are generating properly in the crystal report browser but when I am exporting the reports in PDF or trying to get print by clicking on print button, reports not generating properly.
Allignment in the exported PDF reports getting changed and reports margin is also changes. Due to this some part of report is chopped and printed on the next page.
I have deployed my application on IBM WebSphere 6.1 server and I am getting following error which might help to identify this issue.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: The response has already been commited.---- Error code:0 Error code name:succeeded
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
at com.crystaldecisions.report.web.component.o.a(Unknown Source)
at com.crystaldecisions.report.web.event.br.a(Unknown Source)
at com.crystaldecisions.report.web.event.w.a(Unknown Source)
at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
at com.crystaldecisions.report.web.event.av.a(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
at com.ibm._jsp._CrystalReportViewer._jspService(_CrystalReportViewer.java:107)
at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:115)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:168)
at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:92)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1425)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:92)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
at com.ibm.ws.ssl.channel.impl.SSLReadServiceContext$SSLReadCompletedCallback.complete(SSLReadServiceContext.java:1812)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:193)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:725)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:847)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1498)
Caused by: com.ibm.wsspi.webcontainer.ClosedConnectionException: OutputStream encountered error during write
at com.ibm.ws.webcontainer.channel.WCCByteBufferOutputStream.write(WCCByteBufferOutputStream.java:80)
at com.ibm.ws.webcontainer.srt.SRTOutputStream.write(SRTOutputStream.java:96)
at com.ibm.wsspi.webcontainer.util.BufferedServletOutputStream.writeOut(BufferedServletOutputStream.java:438)
at com.ibm.wsspi.webcontainer.util.BufferedServletOutputStream.flushBytes(BufferedServletOutputStream.java:344)
at com.ibm.wsspi.webcontainer.util.BufferedServletOutputStream.flush(BufferedServletOutputStream.java:323)
at com.ibm.wsspi.webcontainer.util.BufferedServletOutputStream.flushBuffer(BufferedServletOutputStream.java:478)
at com.ibm.ws.webcontainer.srt.SRTServletResponse.flushBuffer(SRTServletResponse.java:452)
at com.ibm.ws.webcontainer.srt.SRTServletResponse.flushBuffer(SRTServletResponse.java:436)
at com.crystaldecisions.report.web.viewer.JSPViewerResponse.flushBuffer(Unknown Source)
... 33 more
Caused by: java.io.IOException: Async IO operation failed, reason: RC: 64 The specified network name is no longer available.
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:203)
... 3 more
Thanks in advance
Alok P.The stack trace is caused by whitespace in your CrystalReportViewer.jsp file. Look up SAP Note 1199025 for the resolution.
It's not related to the PDF formatting issue. There's been changes to the formatting with the most recent version - Crystal Reports for Eclipse 2.0 - so if you haven't already, I recommend you upgrade.
Note that there's differences in font metric calculation when using Adobe PDF format such that there's no way to get exact agreement between output of the CR and PDF. But the latest version helps greatly.
Sincerely,
Ted Ueda -
Issue while exporting report - OBIEE 11g - IIS 7.5
Hi,
We are currently on OBIEE 11.1.1.7.0 version of OBIEE and we have set up proxy through IIS 7.5 on Windows 2008 R2 server.
While exporting our reports, we need to ensure that both Export to excel options (2003 and 2007+) are working fine. However, for some reports, when we try to download the reports to Excel 2007+ format, we get a "Internet Explorer cannot display the webpage" error message. This issue does not appear if we change the URL to directly access Weblogic server (instead of routing through IIS). Wanted to know if anyone have faced similar issue and have found any solution/workaround for same.
Thanks
HyderHyder,
I have achieved this.We have deployed our OBIEE application on Weblogic server not on IIS.
Sasi Nagireddy: How to Export Analysis in Excel 2007 +
Thanks,
Sasi Nagireddy..
Maybe you are looking for
-
Illustrator wont copy & paste at 300 ppi regardless of settings
I just recently reformated my computer and I've been having an issue with copy and paste from Illustrator to Photoshop. Before I could copy a 2"x2" vector box from Illustrator into photoshop making a new document and the size and resolution would mat
-
Exchange Webapp not working After update rollback 5 is installed
Hi A windows Update installed on machine with Rollup 5. First all the MS Exchange services were disabled and then when I try to set up to Automatic and start all the services exchange from outlook works good. But when I try to access it from web it's
-
RDBMS and LATFORM SUPPORT for SAP XI
Hello! I would like to know, whether the following RDBMS and PLATFORM SUPPORT-requirements (below) can be realized with SAP XI or not. I will be very thankful if someone can help me by answering of the following questions (if it is possible, Yes/No a
-
Similar to MS Office, one can position all the menu bars in any order, top down or sideways as required. I find that with ver 4, the tabs on the top line , the search, home buttons etc are not intuitive and are quite annoying with their positional ch
-
New version crashes in email apps can not attach anything
I have always used firefox. I downloaded the new version and now when I go to attach a file to an email, at comcast, gmail or any other I get the message that firefox has a problem and must close, or restore. I rebooted several times restarted many t