Losing vocal sync after mixdown

After spending considerable time syncing my voice over the singer to most times prettty damn close it plays ok in multisession but when I mixdown the sync is sometimes way out .Any reason for this and is there a correction/adjustment I can make prior to mixing. Some recordings are not a problem because one can drop the vocals a bit without screwing up the backing but some you cant. I know proper backing tracks are the answer and these are used when available but not always available i'm afraid

Just a thought - after you have done all your edits/adjustments etc, save the session and then exit the session.
Open the session and then do your export/mix.

Similar Messages

Audio losing sync after files are imported to FCP?

Hi Guys. Bit of an odd one and i've been digging around but haven't found anything yet.
I am having an issue with footage in FCP losing audio sync to the extent that even though the timeline clips appear to be the same length, the audio starts slightly earlier and is cut of at the end of the clip. It 's almost as thought the audio and video timelines are running at different frame rates but the problem starts earlier than that.
I am cutting a showreel together and it's a bunch of 30sec tvc's. All of them play fine off the desktop no sync issues at all but once imported to FCP the audio is all over the place even before i put into the sequence. At first i thought it may be a processing thing so i opened up couple of music clips that i had cut that were a little more sound and graphics intensive. They played out fine. The Media is coming of a 12TB RAID5 with 9TB usable storage. All the disks are in good health. I'm running 7200rpm seagate barracudas and never had problems before today.
I tried opening up a new project and starting from new but still no joy. I was running audio through external speakers which would account for a delay but not to this extent. and i also tried just using the built in speakers to be sure.
The video is compressed to ProRes 422(HQ) 720p 48khz sac audio data rate 79mbits
Thoughts???
Thanks
J

Kept digging and answered my own question, I had verified everything except the source video's frame Rate which was compressed at 22FPS for some odd reason. I didn't do the initial compression so assumed it was cool. Once I recompressed the Source to 25FPS it was all smiles. even though the original compression had the AV in sync it appears that FCP doesn't like non standard frame rates and the 22FPS was throwing the audio out of wack.
Thanks
J

Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

Hi. I just got the iPhone 6, plugged into itunes and made the mistake of putting an OLD back up on my new phone resulting in losing all contacts after 2013. They are not saved on the cloud. Is there any way to go back to before I screwed up?

If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.

Display (Samsung LCD-TV) does not sync after wakeup anymore...

Configuration:
Mac Mini early 2009 (nvidia 9400), 2GHz, 4GB Ram, Mac OS 10.6.1
Samsung 26" LCD-TV, connected to mini-dvi by Apple mini-dvi-to-vga adapter (resolution: 1360*768)
Problem:
since upgrading to Snow Leopard, the display will not sync after the mini wakes up from sleep. Works fine after reboot. Also, changing resolution in the control panel does not work with 1360*768.
All this worked with leopard.
Any help would be highly appreciated.
Regards,
Peter

I have no solution to this issue, but I've been having the same problem for about 2 weeks now. I never had any other issues with my iPhone in the 15 months I've owned it, but this is causing huge problems for me.
My computer setup is very similar to the above poster, and I've tried the uninstall and complete reinstall (and every other suggestion I could find) to no avail. iTunes just won't recognise my iPhone and it hangs every time I try to connect it.
In the iTunes diagnostics (which I can only get to work if I open it before I connect the iPhone) everything is green except the sync tests, which it fails. The help button there is completely useless, Apple's website generally isn't helpful and there's really no other way to get support from them.
Does anyone have any ideas?

Ipod Touch 5th gen won't sync after iOS update

iPod Touch will not sync after iOS 7 update. It's stucked at "changes are being applied" and won't go past that point. Tried 5 times and got the same problem. I have the latest iTunes installed.
Any suggestions?

Try a cold reboot of your phone / iPod. I.e. hold power + home button until it reboots.
Worked for me.

Ipod stops syncing after about 11gb on data transferred

ok, my ipod stops syncing after i transfer about 11gb of data.
my music collection alone is 12gb, i also have alot of photos and videos and other contents.
it doesnt matter which format the ipod is in, mac formatted or windows formatted its the same result.
its an 80Gb ipod classic.
any one have any clue as to why this is happening?

Actually at 1200ish songs the iPod hard drive starts making some severe clicking/clanking noises. I'm guessing it means the hard drive is screwed since it's the same symptoms as my last iPod
Why does this happen? Both my iPods were about 2 years old when the hdd's started clicking, surely hdd's last for more than two years?

Ipod touch will not sync after new itunes update

Ipod touch 4th generation will not sync after I updated the new itunes. Actually after I updated to the new itunes it deleted all my music from my ipod and refuses to reload. If someone could please help me that would be completely appreciated. I tried trying to sync each song individually but it didn't help (before it stopped syncing), then it stopped syncing, even though I have it hooked up it brings everything that I have on my ipod up but it won't do anything.

When I tried the first time it asked me if i wanted it to stop syncing and to restore. It gave the choices of yes and cancel, i didn't click either because the option box went away and it just stopped restoring on its own. I did the store again and now it is asking if i want to set up as a new ipod or to restore to Andrea's ipod. Should I set up as new?
Thank you Espeon for the article

My iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3

y iPhone 4S no longer syncs after upgrading from 10.5.8 to Snow Leopard 10.6.3 - any solutions out there?

Thanks - got stuck with the upgrade to 10.6.8, but Apple Support was able to navigate me through that, the date settings caused a problem here.

My iPad will not sync after system update and returns message that my computer is no longer authorised.

Please help me sync my iPad as it is not able to sync after a system update. Several messages 1. Computer no longer authorised and when I reauthorise it it prepares to sync and then it tells me my iPad cannot be written to,

Hi leefromwoodford,
The following article will tell you how to transfer purchased music from your iPhone to the your Mac -
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Specifically -
Transferring purchases
If your iPhone, iPad, or iPod has your purchased content from the iTunes Store, you can transfer the content to a computer that is authorized for your Apple ID.
Note: This option only works for content you purchased from the iTunes Store (as opposed to content from other sources, such as CDs you may have imported). For content you did not purchase from the iTunes Store, synchronization occurs in one direction only. This means your content can be copied from a computer to your iOS device, but cannot be copied from your device to a computer.
Open iTunes.
From the Store menu, choose Authorize This Computer.
Enter your Apple ID and password. Then, click the Authorize button.
Connect your device your computer. If it is synced with another iTunes library, you may be asked if you want to "Erase and Sync" or "Transfer Purchases."
If that alert appears, click Transfer Purchases.
Important: Clicking Erase and Sync will delete any existing content currently on your device. The content would then be replaced with the content that is on the computer.
If you were not offered the option to transfer purchases:
After connecting your device to the computer, its icon appears in iTunes. Click the icon.
From the File > Devices menu, choose "Transfer Purchases from 'Your device name.'"
Note that the computer must be authorized for the Apple ID under which the purchases were made.
You may also want to download the music directly from the iTunes store, rather than using the iPhone. See this article -
Download past purchases
http://support.apple.com/kb/HT2519
Thanks for using Apple Support Communities.
Best,
Brett L

Ipod touch 5th gen will not sync after windows 8.1 update

ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

IPod Nano won't sync after iTunes update to 11

My 5th Generation iPod Nano will not sync to iTunes 11. I am running iTunes 11.0.1, on an one year old iMac running on an Intel Core i5, running MacOS X 10.8.2 with 4 GB of memory. Now that we got that out of the way-- I use this iPod daily. Once I updated to iTunes 11, synching has been sporatic. Once I plug the iPod in, iTunes opens like it should, however the iPod never appears in the iTunes window, only in the Finder. I have done the following:
ejected the iPod from the Finder window and then unplugged it, and reattached the iPod.
Quit iTunes and restarted, reStarted the iPod by toggling the power switch and holding the Menu/Select buttons until it restarted.
Rebooted my computer
Restored the iPod nano
Results are the same. Sometimes it will sync, after an extended period of time, without reason. Once I eject and need to reconnect the device, I am unable to get it to sync. Sometimes I have ended up with a spinning beachball and have force quit iTunes and sent a report and a description, but Apple doesn't seem to have come up with an update yet.
I can tell you this-- I have not seen an iPod that would be a suitable replacement for this one-- I love not having to look at the screen to operate it's simple controls, and it is the perfect size.
I can also tell yo uthis-- The new suprise user interface on iTunes 11 is clunky and requires too many steps to maintain my playlists. Do not like it.
Suggestions?

Hey hirsty!
I have a link for you here that can help you troubleshoot this issue:
Apple - Support - iPod nano - iTunes Troubleshooting Assistant
http://www.apple.com/support/ipodnano/assistant/itunes/
That link will help you through some steps that will help you resolve this issue with your iPod nano syncing. Thanks for coming to the Apple Support Communities!
Regards,
Braden

Standby database(11g) was still in sync after stopping the primary and standby database listener.

Hello !!!
I have noticed that my standby database(11g) was still in sync after stopping the primary and standby database listener.
If this is the case then how log is transferring from primary to standby ? it is not using listener service ? kindly clarify

Read this Metalink Note:407040.1

Mac OS X partition ("Macintosh HD") gets out of sync after hibernation

Hello,
I have a first-generation Unibody 15" MacBook Pro. I run Mac OS X Lion and Windows XP Profession 32-bit through Boot Camp on it.
I notice that the Mac OS X partition gets out of sync after I hibernate in Windows XP, reboot into Mac OS X Lion, restart and resume Windows XP. Certain folders would remain visible in Windows Explorer but become inaccessible, while some folders that I just created in Mac OS X would not even show up.
Is there a way to tell Windows XP to "remount" the HFS+ partition?
Steps to reproduce:
Boot into Windows XP;
Hibernate Windows XP;
Boot into Mac OS X;
Pick a folder and change something in it;
Create a new folder;
Reboot and resume Windows XP;
Open "Windows Explorer";
Try to access the folders you just meddled with.

SwordAngel wrote:
Hello,
I have a first-generation Unibody 15" MacBook Pro. I run Mac OS X Lion and Windows XP Profession 32-bit through Boot Camp on it.
I notice that the Mac OS X partition gets out of sync after I hibernate in Windows XP, reboot into Mac OS X Lion, restart and resume Windows XP. Certain folders would remain visible in Windows Explorer but become inaccessible, while some folders that I just created in Mac OS X would not even show up.
Is there a way to tell Windows XP to "remount" the HFS+ partition?
Steps to reproduce:
Boot into Windows XP;
Hibernate Windows XP;
Boot into Mac OS X;
Pick a folder and change something in it;
Create a new folder;
Reboot and resume Windows XP;
Open "Windows Explorer";
Try to access the folders you just meddled with.
Don't hibernate, shut XP down when you reboot and the issue goes away, you really should consider using a more modern operating system.

Cannot sync after 2.0 update

I just downloaded the 2.0 software onto my IPhone, and as it was doing it's thing it told me there was an error in restoring the phone. My music and about 2/3 of my photos disappeared from the phone, and now when I try to resync it it gives an error message of "required disk not found."

Not sure if this will fix your problem, but I had problems syncing after the upgrade too. I discovered that the backup iTunes made when upgrading was corrupted. To fix it, I chose to do a new restore, and then select the New Phone radio button instead of the one for the previous backup after the restore process was completed. Then I had to reselect and manually sync contacts, calendar, email, bookmarks, video, podcasts, etc again after completing the above step, but it fixed my problem. iPhone syncs fine now.

How setup LDAP Sync After Install in OIM 11g ver, 11.1.1.5.0

Hi guys, I'm trying to find how to setup LDAP Sync After Install in OIM 11g (ver, 11.1.1.5)....
I found on Metalink an interesting article "*How to Setup LDAP Sync After Install in OIM 11g [ID 1272682.1]*", but inside there is a Note that says:
Note: This article is applicable to OIM version 11.1.1.3 only. Steps for 11.1.1.5 are not the same, and product manual has documented steps to setup LDAP sync after install.
So, that the steps for 11.1.1.5 are not the same, it's clear.....
and I tried to look for these steps in the manual:
Oracle® Fusion Middleware Quick Installation Guide for Oracle Identity Management
11g Release 1 (11.1.1)
Part Number E10033-06
but I didn't still find nothing for the specific 11.1.1.5.0 version....only for the 11.1.1.3.0 version
Can anyone help me to find where these steps are ? I need this information as soon as possible ti start the development
Thanks in advance for the help
Alex

If you are creating Before and After Create Opeation script, you would be able to access all the variables in the process form. Now obvious question, what are the names of these variables? The answer is: the name of the variable is same as that mentioned in the "decode" column of the provisioning attribute map lookup or in other words, the variable name is same as the AD attribute name. In the example mentioned in the documentation, the variable "%givenName% was used in the script. On the similar lines you can use other variables like "sn", "samAccountName", etc.
Hope the information helps.

Losing vocal sync after mixdown

Similar Messages

Maybe you are looking for