Loss connection SMB on OSX 10.6.8 after standby

Hello,
I have a problem on an iMac with osx 10.6.8. After standby when I go to the MAC before I lose my connection SMB. I have to restart the Mac in force because it also blocks the judgment by the system.
Do you have a solution to my problem, thank you in advance.
Regards

Your crashreport is: 
https://crash-stats.mozilla.com/report/index/bp-12330949-db76-498f-af0a-2c9eb2111101 
Firefox 7.0.1 Crash Report [@ RapportTanzan7.dylib@0x7f7f ] 
Similiar crash here: http://support.mozilla.com/nl/questions/891272 
This is a crash in Trusteer Rapport. On Windows we were able to solve this problem by having users updating to the newest version of Rapport. You may need some help from the Trusteer helpdesk, because it seems like the automatic updates does not allways update to the newest version. 
See: 
https://support.mozilla.com/nl/questions/888019 
https://support.mozilla.com/nl/questions/887181

Similar Messages

Time capsule disk loss connection frequently

I have the latest time capsule (3T) and Mac Book Pro with retina display. The internet connection is perfectly stable but the hard drive loss connection frequently. The only way I could reconnect is to reconnect the wifi with TC (change the wifi from 2G to 5G or the other way around) but after 1 minute I loss the connection again.
I have a usb disk connected to TC and a My Cloud EX2 connected to TC. The My cloud ex2 is working fine.

I have a usb disk connected to TC and a My Cloud EX2 connected to TC. The My cloud ex2 is working fine.
There is something major faulty in the networking of yosemite. Clearly the TC is also involved in this failure.. otherwise you would have the same trouble with the EX2 MyCloud.
I suggest you redo the setup of the TC.
Make sure all names are short (10 is a good limit.. no more than 20 characters), no spaces and pure alphanumeric.
Make sure its IP is static. This is always the case in router mode but tricky if the setup is with the TC bridged to modem router.
Use all passwords that are pure alphanumeric mixed case and numbers.. but 8-20 characters.
Manually mount the disk by IP address is far more successful than by name in Yosemite.
So use Go, Connect to Server in Finder.
Type SMB://10.0.1.1 (replace with the actual IP but that is default for router).
Do not forget to save the password in the keychain when asked.
In the computer set wireless ipv6 to link-local only (this is carry over.. I am not sure it is needed but is easy to do to test).
There are lots of other suggestions in this thread.
new x yosemite doesn't support airport utilities ... time capsule doesn't work.. very frustrated ... need help please
Your experience is not unique.. this is just buggy OS.. there are lots of suggestions in this thread.. some work for some and some don't.. if mine don't work then try some of the others. Welcome to the new Apple, "it just works" after you kick it around the block half a dozen times... because we forgot to test before releasing it.

Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.

Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.
Bought my girlfriend the newest Macbook Pro 13" and began experiencing problems with my wifi the moment we got home. Her Macbook would not connect to our home Wi-Fi while my old Macbook Late 2008 running Snow Leopard connected without a problem. Airport would say that it had a Self-Assigned IP address (168.x.x.x). Did not realize it was a Lion problem until after using her Macbook Pro and becoming jealous of the new OSX, I upgraded. Soon after I was unable to go online. Luckily I had my iPad 2 and I began to scoure the net for help. Ran into allot of suggestions but it was not until I tried the following all together was I able to share the good new, from my Macbook. Hope this works:
First go to Preferences > Network and click on the cog next to the + and - on the sidebar and click Set Service Order
     - Move Wi-Fi to the top and click ok.
     - Set location to Automatic
     - Click Apply
     - Click Advanced
     - Click the "-" on the selected Wi-Fi router you wish to connect to
     - Click Apply
     - Click Lock to Prevent Further Changes
Go to your Mac's harddrive, (Macintosh)
     - Go to Library > Preferences > SystemConfiguration >
     - Delete "com.apple.airport.preferences.plist" file
Turn off your computer
     - push and hold Option+Command+R+P
     - turn on computer
     - when the grey screen turns on you will hear the OS X "ON" sound (for lack of a proper term) and it will momentarily restart.
     - you will once again hear the "ON" sound, let go of all keys.
     - this resets your PRAM
Go to Preferences > Network > Advanced > + sign
     - click Choose a Network
     - Select your network and enter password
Viola!!! I tried this on my Macbook Late 2008 and my girlfriends new Macbook Pro 2010

     No you are clearly mistaken. The Self-Assigned IP address problem exists on many Macbook Pro models, including the current model, which I mentioned as being the original computer with the problem. While my 2008 Macbook is older it was working perfectly on Snow Leopard and didn't suffer issues until switching to Lion. So clearly the problem exists on the operating system and not so much the hardware.
     I called Apple Support and they had no fix for the problem and told me that this would hopefully be addressed in a subsequent update. It wasn't until I came accross the answer after trying many different methods that I got both of the Macbooks to connect to my router. Otherwise I wouldn't or could not have been surfing the internet for the last 4 months.
Cheers.

I constantly loss connection to my wifi home connection, have to turn off and on the wifi on my macbookpro (10.7.4) , any sugestion, thanks

I constantly loss connection to my wifi home connection, have to turn off an on the wifi on my macbook pro (10.7.4) , any suggestion, thanks

• WiFi, Internet problems, possible solutions

Unable to connect to m audio ozone midi kybd after updates

Ive just done the latest osx software updates and now am unable to connect to m audio ozone midi kybd after.Is this a coincidence, is my ozone kybd at fault or is the the latest of a string of problems I seem to now have with my mac? see other topics ive just posted

Frantic wrote:Well, I don't think it's an option when I take my laptop somewhere to ask the person to turn on his ssid broadcast because the "so cool" laptop can't connect to it otherwise
I wasn't aware this was not on your own network. That of course narrows down your options considerably.
Please don't hijack the thread on this, but by hiding the ssid vs just setting a obfuscated name lets this decision pass as a network security and not as a social or privacy-related concern (which it really is).
I don't see in the slightest how I would be hijacking your thread. Hijacking a thread means asking your own question in someone else's thread. I am merely pointing out it might help during troubleshooting, and that it is frequently known to cause problems with Linux.
And no - hidden SSIDs aren't a 'security' feature. It's not because you can't see it scanners can't see it or intercept the SSID in traffic . I'll leave it at that.
Also - and this might be relevant to your problem - I found this article which states
It's a violation of the 802.11 specification to keep your SSID hidden; the 802.11i specification amendment (which defines WPA2, discussed later) even states that a computer can refuse to communicate with an access point that doesn't broadcast its SSID.
And, for the incredulous:
And, even if you think your SSID is hidden, it really isn't.
Maybe the IPW3495 driver's 802.11 implementation got tightened, have you tried using an older kernel?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

I have an old Mac G5 with OSX 10.5.8 After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank you

Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after and extended period of time please help

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

Just installed update10.6.8 on my imac restarted and opened safari i have little snitch, it said xdefender wants to connect with apple, i let it. but after think has a malware been installed and update rooted it out? kindly advise

ust installed update10.6.8 on my imac restarted and opened safari i have little snitch, it said xdefender wants to connect with apple, i let it. but after i thought has a malware been installed and os update rooted it out? kindly advise

i have this sorted, a misunderstanding it was not xdefender trying to connect with apple it was XProtect Updater from apple.
jcher

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears

Unity Connection 10.5.1: I upgraded the Unity Connection Server from V 9.1. After that, cannot logn to ELM an error message " The server encountered an internal error that prevented it from fulfilling this request." appears. The error further displays "
type: Exception report
message:
description: The server encountered an internal error that prevented it from fulfilling this request.
exception:
ServletException Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
root cause:
NoClassDefFoundError Could not initialize class com.cisco.vos.platform.api.config.UpgradeStatus
note: The full stack trace of the root cause is available in the logs.
Has anyone experience this issue? Any solutions? Your assistance is greatly appreciated!

Hi Mesut,
you can refer the link for migration
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/upgrade/guide/10xcucrugx/10xcucrug010.html
regds,
aman

Anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999..

anyone knows how to get the photos after IMG_9999 from iphone? :-(ps:... i got them all in my camera roll but when i connected to the computer there's nothing after IMG_9999.. many thanks :-)

They show in the camera roll, just not your computer?
Have you checked every folder that is in the DCIM folder?

Adobe reader shows a horizontal empty window in OSX 10.9.3 after uninstalling Acrobat 8. How to get rid of it?

Adobe reader shows a horizontal empty window in OSX 10.9.3 after uninstalling Acrobat 8. How to get rid of it?

Macintosh HD > Library > Internet Plug-ins
Look for these two files.
AdobePDFViewerNPAPI.plugin
AdobePDFViewer.plugin
Right click on those and select “Move To Trash”.
Restart the computer.

Able to connect keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please

Hello,
I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
thanks,

Hello:
You will need to delete the keyboard from the other Mac. Simply disconnecting it leaves it still paired with the first Mac.
Barry

Loss connection SMB on OSX 10.6.8 after standby

Similar Messages

Maybe you are looking for