Loss of Audio and Video Playback

Hello.
I am currently using Adobe CS6 Production Premium on Windows 7 Ultimate. I have updated alll of my sound card drivers.
While in Premiere Pro, if I unplug my headphones, so that I can hear through my speakers, the video and audio playback hangs. In order for both playbacks to work again, I must restart the program. The program itself does not freeze, as I am able to drag clips as well as save the project.
Any help would be appreciated.
Thank You.
Tyler

More information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Also, H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115

Similar Messages

  • Audio and video playback stuttering...sometimes

    I'm having issues with audio and video playback stuttering at times in several applications. It's the same kind of skipping or stuttering in each application, whether it's iTunes (version 10) or YouTube or Netflix (Safari). I can also hear it when I'm just adjusting the volume via the keyboard, the "clicks" stutter.
    I'm not running anything other than iTunes and Safari at once, the iMac has 2 gbs of RAM, it's running Snow Leopard. It also will work sometimes for a while. I just can't figure out why it will work sometimes and not others. Any ideas about what the cause may be? Quicktime X have anything to do with it?

    video playback stuttering at times in several applications.
    Quicktime wouldn't work either.
    Until you max out your ram, you are pretty much stuck between a rock and a hard place.  In the meantime, make sure you have the latest versions of
    Adobe Flash Player
    Flip4Mac
    VLC Media Player
    Perian
    Movist
    I'm noticing that in general it's running extremely slowly now, even with only the browser running.
    Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.

  • Loss of sound and video playback on ENVY X2

    Every so often, more often than I would like, my HP Envy X2 loses sound and video playback capabilities; any ideas anybody? The concept of this machine is great and have had it for the past 9 months but this loss of sound and vision is so unpredictable and frustating...  

    Hi Brumage,
    I saw your post regarding the sound and video issues and I will be happy to help. Do you get any error messages when this happens? Have noticed if it is a particular site like YouTube or program that you are using when the issue occurs or does it occur on all programs? When you restarted the Envy X2 does the issue go away?
    I would start by suggesting that you make sure all updates have been installed through HP Support Assistant and Windows Update.
    What operating system are you running? What is your product number?
    Find your product number on a notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    Finding your OS:
    http://windows.microsoft.com/en-CA/windows/which-operating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Controlling Speed of audio and video playback ?

    Hi!
    I would like to know if there is (or will be) a way with
    upcoming Flash CS4 or even with Adobe Flash Player 10 capabilities
    (or even with Adobe Pixel Bender) to control the speed of an audio
    or video playback.
    For example being able to play some sound slower or faster
    and even adjusting audio pitch (and other audio filtering).
    It's been a while that I've been looking for this (back to
    Flash Player 6 when Flash was part of Macromedia) and with all
    progress achieved since then I hope there is some accelerate and
    decelerate feature now.
    Please let me know about it.

    More information needed for someone to help... click these links and provide the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    -http://forums.adobe.com/thread/419406
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    Also, H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115

  • Audio and video playback latency ,since windows 10 help please

    hi everyone I'm having a problem with my laptop ,video playback is lagging and sound to , sometimes making robotic sounds, and it all started when I upgraded to windows 10.my laptop: Lenovo ThinkPad x220 intel core i7 2.7 GHz processor 8 GB of ram previously had windows 7 pro now windows 10 proI tried resetting my computer , you know to have it clean and fresh, I thought this might help , maybe some old programs from windows 7 were causing this problem , but it didn't help , I also tried disabling and enabling the drivers from the device manager , is a trick I found on youtube , but it didn't work , I'd be very thankful if you could give me some advices .

    Can you try disabling the Ethernet adapter in Device Manager?

  • Audio and video playback from the internet.

    Hi all, I am just learning on my computer so i am afraid you will have to bear with me !!! I have just visited the BBC News homepage and could not play any of the video clips or radio clips on offer, the error given was that real player was not installed, I then followed the instructions and appear to have sucessfully installed real player but still no joy on playback. What am i doing wrong ???

    I experienced the same problem with audio (haven't tried video) and I don't have a complete answer to it, but if you download Real Player you can listen to the audio stream if you click on the link "Listen using stand-alone Real Player".
    For a more complete solution, I'm waiting for the next version Firefox which promises to be compatible with Intel iMacs.

  • Clip audio and video playback out of synch

    I've noticed that everything in FCP X is slightly out of synch. Just enough to be noticeable. I thought it might have been the time taken for the sound to travel the length of the church (recording from a camera mic) but I shot some green screen yesterday and even that is out.
    The same hardware was used ok with FCE-4 - the Audio i/f is FW-400 and on same bus as FW drives.

    Hey Andy,  (cue whistling theme music)
    Thanks for your informed opinion. Interesting that Apple released FCPX in it's current state rather than wait for the release of Lion. Seems like the core technologies now bundled with the app would make a significant difference running natively.
    I'm an audio guy... the next release of Logic Audio is going to be version X, I'm just hoping it's not going to be Garageband Pro. 
    The reason I was expressing doubts about an OS upgrade making a noticeable difference is.... I heard the same thing about Snow Leopard. As it stands now I have two clients trying to run the latest version of Logic Pro on the current release of SL (10.6.8), the results are not good, the Logic Pro forum has many users unable to get Logic to even boot without crashing.. I'm waiting to hear from support. It seems like the OS is ahead of app development and things are breaking.
    pancenter- 

  • Logic 9 Audio and Video sync at beginning timecode, but not in the middle of playback.

    Hey Guys,
    I'm working on a Trailer for a feature length, and my video playback is pretty screwy.
    I've double checked the video to be 23.976 framrat and set my project to that framrate, and I've done what I normally do with bitrate and sample rate. But currently my audio and video will not sync together when I start playback in the middle of my project.
    Playback works fine in the start of the project, and everything looks and sounds great. But as I'm writing and edtiting further on in the project all the audio gets out of sync. If I start the project from the beginning, then all of the MIDI for the whole piece registers as synced, and the project sounds and looks great the whole way through. The problem comes from starting playback anywhere in the middle of the project.
    I'm working with a .mov file (1:45 minutes); three .AAC audio files, and plenty of thrid-party plug-ins. 10.7.5 Mac OS X, 2.2 GHz i7 core, and 4GB m
    of memory.
    Any thoughts?
    Thank you!

    Thanks guys for the input.
    I am using an Aurora 16 via firewire
    I did change my buffer settings and that seemed to fix it but now I am at 128. I moved over to the aurora because I preferred the extra headroom. I guess I should have stuck with the apogee.
    Tonight was the first time I had the opportunity to do a full tracking session with 9. I have been doing quiet a bit of mastering with no issues. Quiet a few issues. Everything from logic quitting to it just locking up. So far.....a pretty bad experience. I wonder if it could be Snow Leopard.......

  • Audio and video sticking and jumping after installing windows 8.1

    Hello, 
    I have a HP Pavilion G6 - 2292sa
    The product no is C1Y93EA#ABU
    I have recently upgraded my system from windows 8 to the windows 8.1 update. Since I updated my audio won't work properly at all. During random intervals when playing songs on itunes the song will jump and stick for a few seconds then continue playing with random jumps like this throught all the songs. When I watch a music video on youtube the audio does the same thing as it does in itunes as well as the video sticking and jumping. I have tried an audio fix I saw on the HP forums that suggested I delete the hd audio driver, hard reset then reinstall them but this didn't have any affect what so ever. This is a huge problem since I can't watch netflix, listen to songs or pretty much do anything media related. 
    Any help you could give would be really apreciated. 

    Hi Greum,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that after updating to Windows 8.1 your audio and video sticks or jumps and you have been  unable to resolve it. You have tried uninstalling and reinstalling the audio driver to no avail.
    I suggest you run The HP Support Assistant to look for updates and help resolve issues.  You also have a built in troubleshooter in Windows 8 and 8.1.
    Press the Windows key +C to open charms
    Type troubleshoot audio/video and press enter
    Follow the on screen prompts.
    If these steps have failed to resolve the issue, I suggest you do a recovery back to factory and then retry the update.
    Performing an HP System Recovery (Windows 8). You will see an option to backup your personal files during this process, if you have not done one yet, I suggest you do one now, to prevent any data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    Here is a link to a document to assist you with  updating.Updating Windows 8 to 8.1.  Please let me know the outcome.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Does 2 firewire audio and video interface can work together  on FCP ?

    hello,
    My audio interface is a TC Electronic Konnekt 24D
    my video interface is a Canopus ADVC 110
    my hard drives are plugged in firewire too
    and I use Final Cut Pro 5.0.4
    So, the konnekt is recognized by FCP only when the Canopus is not plugged. And even then, the audio sometimes drop out and sometimes causes the app to crash, so that I have to trash the preferences
    When I plug the Canopus, the Konnekt 24D is recognised by OS X but not FCP
    I want to use the voice over tool with the konnekt 24D, so what should I do ?
    Does 2 firewire audio and video interface can work together ?
    If so, maybe I only have a driver problem from TC Electronic.
    But if not, I have to change this interface. Let me know if only RME, MOTU, Presonus and Edirol work, as it is said on apple's webpage for hardware compatibility
    thanks
    eMac G4 1,25 Ghz Mac OS X (10.3.9)
    eMac G4 1,25 Ghz 1 Go RAM DDR   Mac OS X (10.3.9)  

    The 1082 does show up as a possible input when I open
    the VO tool.
    Ok. So an audio interface can be plugged to FCP without crashing the app. Because of the Konnekt driver problem, I wasn't shure of this.
    I use my Aja box for export & external monitoring.
    All my audio sources run back into the Tascam and I
    use the analog mixer in the 1082 to monitor different
    sources.
    When I view external video, the audio follows it to
    keep sync.
    that's exactly what I want with other I/O interfaces. I'd like to monitor video with the canopus ADVC 110, and monitor audio with the Konnekt 24D (or another interface if this one is not compatible)
    I also imput dailies with a deck or a camera (DV or HDV) but that's not the point here.
    I want to imput audio with the Konnekt 24D because of its audio quality. Not audio sync to video dailies. But voice over, in sync with FCP video playback (for me, tha ADVC 110)

  • Audio and video out of sync on converted AVI file

    I am trying to convert a DVD to an AVI for playback on a device. When I import the DVD and publish it as an .AVI the output audio and video are out of sync. After about an hour of playback the audio lags the video by a full second. How can I correct this problem?

    Walter0325
    If you have Premiere Elements 12 on Windows 8 and you want to rip VOBs from the DVD-VIDEO to export subsequently to DV AVI, here are the details....
    1. Do you have DVD-VIDEO standard or widescreen? Set the Premiere Elements 12 project preset manually.
    File Menu/New/Project. Set the project preset to NTSC or PAL DV Standard or NTSC or PAL DV Widescreen depending on what you have.
    Before you exit the new project dialog, make sure that you have a check mark next to Force Selected Project Setting on this Project.
    2. In the Premiere Elements workspace, use Add Media/DVD camera or computer drive/Video Importer to get the VOBs (only the ones in the series VTS_01_1.VOB. Set to a folder in the Save In: location. Check mark next to Insert in Timeline. Hit Get Media.
    3. If you have an orange line OVER the Timeline content, press the Enter key to get the best possible preview of what you have on that Timeline.
    If after all that, the audio is out of sync, then use the Command Prompt method to get the individual VOBs into a single file with all the VOBs seamlessly merged. This worked nicely for a recent user here. See details in my blog post how to for the Command Prompt way.
    http://www.atr935.blogspot.com/2013/09/pe-dvd-videoseamless-vob-ripping.html
    Please do not hesitate to ask if you need clarification on anything that I have written.
    Depending on your results, more information may be requested about the specific properties of what you have on that DVD disc.
    Thank you.
    ATR

  • Audio and video out of synchronization in iTune for Windows 8.1

    When playing back a downloaded iTunes file, the audio and video are out of synchronization a lot of the time.  The audio can be several seconds behind the video.
    How can this be corrected/fixed?
    I am running the latest iTunes software on a 3.8Ghz AMD-processor machine running Windows 8.1.

    Hi John,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides a lot of great troubleshooting tips that you can try, which will resolve most video playback issues in iTunes.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    I hope this helps.
    -Jason

  • Audio and video out of sync on short recordings

    I've scanned the discussions and see that alot of posters are experiencing
    the same problem I'm having which is recording quicktime movies
    and getting audio and video out of sync.
    In most of those posts the responses seem to be that the problem gets
    bad if you're making a long recording. I'm experiencing that, but...
    ...I'm also having the same problem on really short recordings...less than a
    minute. I've coming video and audio out of my cable box, into a SONY DSR-11 VCR, then firewire out of the deck into the computer, recording the movies with Quicktime 7.1.6.
    I know it's coming out of the cable box and then out of the SONY deck via firewire in sync because when I log and capture through Final Cut Pro, audio and video are in sync in preview and playback. I don't want to use Final Cut Pro to capture the movies because I want to end up with MPEG4, and I'd have to go through an extra conversion process out of FCP.
    Any thoughts on why even short recordings through Quicktime are out of sync?
    Thanks.

    I'm having similar problems transferring VHS video to Quicktime. Another problem I'm having is when I transfer a VHS video to iMovie and then export the video to H.264 format, I have similar sync problems, even though the iMovie seems perfectly in sync.
    I'm going to try to transfer several alternative video formats (video from my cable DVR, Video from live TV, and video from a digital mini cassette to try and figure out whether the VHS format is the culprit. Will keep you posted.

  • How to combine discrete audio and video files?

    I am working on a project which requires me to merge a video file with a PCM audio file from another source.
    I just bought Compressor 4.1.1, expecting to be able to do exactly this.
    The only "multiple input - single output" option I can see is creating a surround sound group, adding my audio as left and right channels, and then attaching the video.
    This does not work. Pressing "add" at the end of the process does not result in a new job.
    Help please!
    G.

    QT7 Pro is able to do this. Cost is $30.
    In QT7 Pro, open up the audio and video files to be matched.
    Select all the audio and then select copy
    In the video window, put the playback head where you want the audio to start then select add to movie.
    Verify the playback is as desired, then save the movie. Done.
    Takes longer to describe the process than to do it.
    x
    Of course, life is good when the in point is exactly the same for both audio and video ...

  • K900 audio and video are not in sync.

    Hi All,
    New entry in this forum. I have this K900 phone and i think its an amazing piece or art. But not without its problems though. A perennial issue is when I am playing a video file, initially it plays smoothly but eventually the audio and video are not in sync. Dragging the slider left and right or pausing and playing agian only worstens the issue.
    Have any body ever faced such issues? If yes kinldy share a solution if any.
    Admin edit; subject

    Hello Nosborn1990,
    We've an article which provides some useful information and steps that can help stabilize video playback in iTunes.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/TS1718
    Cheers,
    Allen

Maybe you are looking for