Loss of broadband speed

Hello
I have called the fault line about this but feel i may be getting the runaround from the peeps there so i thought id try this as the guys here seem to know what they are talking about and tend to get things sorted.
Problem is i have had speeds of around 6.7mb dl and 0.38 ul since 2012 but in the last 4 weeks they have gone up and down a lot. last week they dropped from a consistant 6.7 to a consistant 3.4 and remained that way until boxing day night when it dropped to 1.2mb and is now staying at that speed (upload has remained the same through the years)
I cant really do anything now and im at a loss for a fix.
i ordered infinity too and that comes 13th january but am worried that too will have problems.
just need help getting back to normal until infinity because i cant go on like this :-(

also here are my current stats as I know you like these :-)
Line state
Connected
Connection time
0 days, 5:36:27
Downstream
8,128 Kbps
Upstream
448 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
11.7 dB / 26.0 dB
Line attenuation (Down/Up)
11.0 dB / 8.0 dB
Output power (Down/Up)
15.8 dBm / 12.1 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 0
Error Seconds (Local)
0

Similar Messages

Loss of broadband speed after line fault

We have just experienced another of our all too frequent faults on the telephone line. This has now been fixed (OpenReach repaired a couple of joints in our line) or, at least the crackling that was on the line is no longer detectable using quiet line test.
The broadband speed is now at a crawl - see summary router stats below. (router is a NetGear DGND3300). Until the problems downstream speed was about 12Mbit and upstream 0.6Mb ; noise margin was around 6db.
When we have had problems in the past the speed has always recovered within a few hours, on this occasion the speed, noise margin and attenuation haven't budged for 24+ hours. A few questions:-
1. I know that one is advised to wait up to 3 days, but should I expect a gradual improvement over this time or might it suddenly get better? (or have we still got a fault?)
2. Our exchange has been upgraded to ADSL2 since the last time we've had a fault; could this effect the way the line recovers (or not as the case may be!)?
3. The modem is not connected to the master socket at the moment. Although I doubt if this is the source of the problem; I'm tempted to do this. However this would entail disconnecting it - would the 3 day period start all over again?!
System Up Time 24:13:13
ADSL Link
Downstream
Upstream
Connection Speed
283 kbps
440 kbps
Line Attenuation
28.5 db
12.7 db
Noise Margin
26.3 db
22.4 db

Connection has now been up constantly, connected to the test socket for 4+ days and performance hasn't changed (see modem stats below)
What do I do next?
System Up Time 96:12:01
ADSL Link
Downstream
Upstream
Connection Speed
283 kbps
444 kbps
Line Attenuation
28.5 db
12.6 db
Noise Margin
26.1 db
22.5 db

Loss of connection/slow broadband speed/crackling ...

Hi Guys, new to this but hope someone can help. Had our broadband with another internet provider for years til last June then noticed low speeds and internet dropping. Changed to our telephone provider for both telephone and internet, lasted a monthe as the problems were worse. Last November changed to BT on neighbours advice, they are on same exchange and same telegraph pole and they get between 11-13 mbs. Same issues with BT, made several calls to technical help but when broadband speed went to 0.02 mbs have had to make a nuisance of myself. Line engineer came out, changed btbox in home, disconnected any spare extensions not in use, checked wiring and gave clean bill of health and reset broadband speed. Lasted 1 day then connection loss and major drop in speed. Broadband engineer was next, up the pole, down the exchange, wiring changed, bypassed ethernet cable to make sure not home computer, reset but same problems. In constant touch with technical support. At present, plugged into test socket, telephone line crackling, connection dropping every half hour ish, speed 0.242 mbs. Engineer out Monday. Any advice appreciated.

Hi,
The noise on the line needs to be sorted first before the broadband, as the noise can drastically effect the broadbands performance.
1) In test socket dial 17070 option 2 from landline. there should be no noise but slight hum normal on cordless phones.
2) unplug the broadband from the connected test socket and redo quite line test. there should be no noise but slight hum normal on cordless phones.
If there is noise it needs to be reported by dialling 151 from landline. DO Not Mention Broadband as it could go to the broadband department and not the phone department. ie not broadband openreach engineer.
After the phone is sorted and the crackling gone, then your broadband should recover. If not then we can help you
cheers
I'm no expert, so please correct me if I'm wrong

Broadband Speed dropped and wont come back

Hi, I need help and advice please.
Background info first though, so please bare with me.
During last July 2011 I was fed up of very low speeds and managed to get a BT engineer out to check the wiring etc... He did a great job by finding a badly insulated cable between myself and the Cabinet in our village. He also changed our master socket to a newer version.
Over the next few days my broadband speed went from 0.74mb download to 1.95mb download. Fantastic!
This speed has pretty much been a consistent rarely dropping below 1.7mb and at times has even gone up to my highest recorded of 2.46mb. I thought this was brilliant, I could watch iPlayer no problems and xbox live was even bearable (most of the time).
The big problem where I live is sometimes we have power cuts. Sometimes lasting hours but mainly just for seconds. Even so it switches the BB router off. (I know, but not my fault)
When we had the freak snow fall the other month problems started to raise their head. The computers in the household found issues connecting to the router and to resolve this BT BB Helpdesk kept advising me to reset router to enable connection. After connecting new ADSL filters the speed returned but connection issues continued.
BT supplied me with a brand new home hub 3 which I connected thinking it would give me my 2.4mb speeds again. Oh No. To be fare I think I was getting 1.95mb but I wanted more, as most people would. Why cant I get 2.4mb most of the time I have had for a few months.
Anyway I contacted BT who were kind enough to send a BT engineer out. He Said to me the Broadband speed is put out at the exchange (4.5km) at 8mb and comes into our village at between 3mb and 4mb. He detected no fault on the lines and spent the next 3 hours renewing 'D' and 'E' I think side of cabling (found this out later). He mentioned the noise was high but did something to lower it. On leaving he said I had 2.5mb and was confidant it would rise to 3mb.
Great not drastic but should give me 250kbs to 50kbs extra.
The day he was at my house we had 2 short power cuts followed by another couple some days later. This has not helped I'm sure.
NOW TO THE ISSUE.
My download speed since that day has not gone above 1.46mb download and every time I speak to the call centre they tell me my line is only capable of 2mb therefore 1.46mb is within acceptable range.
I am so tired of explaining that I was capable of receiving 2.4mb some 2 months ago yet now since the new hub 3 and line fiddling I am only capable of a 2mb downstream - 1.46mb DLS.
I know I have to wait 3 - 10 days but with power cuts its a nightmare, and they are so adamant about my 2mb downstream limit What the hell has happened.
Here is a link to my recorded (Speedtest.net) data over the past 11 months showing actual proof of receiving 2.46mb:
http://www.speedtest.net/results.php?sh=19a6b38248773feaa954bcf8e17ae768&ria=0
And here is my BT speedtester data:
1. Best Effort Test: -provides background information.
Download Speed
1.38 Mbps
0 Mbps
2 Mbps
Max Achievable Speed
Download speedachieved during the test was - 1.38 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :2.21 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 1.5 Mbps
My home Hub data:
Line state:
Connected
Connection time:
0 day, 17:16:04
Downstream:
2,208 Kbps
Upstream:
448 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.3 dB / 15.0 dB
Line attenuation (Down/Up):
56.5 dB / 31.5 dB
Output power (Down/Up):
18.1 dBm / 11.9 dBm
FEC Events (Down/Up):
12650 / 48
CRC Events (Down/Up):
50 / 17
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
289 / 10
Error Seconds (Local/Remote):
0 / 0
Please Help me I know I've had better than this but all the numbers point to the fact I can no longer have them. Why?
Many thanks
Jon
Solved!
Go to Solution.

Hi JONNYYOUNG,
I'm not educated enough to help but it mat reassure you, as it did me, to know your circumstances are not unique.
Your story sounds very simialr to my experiende last November, speeds and line length being very similar. An engineer said there was noise on my line so he switched me to another pair. Did the engineer do that for you too ? Net result my speed dropped from ~2.3 to ~1.4Mbps.
Fortunately a 21CN upgrade at my excahnge has brought my speed back up to ~2.4Mbps.
I'm sure imjolly, john46 and maybe a mod if you need it will sort you out as well as they did me.
Good luck,
dfenceman
Best regards,
dfenceman

Very slow broadband speeds

Hello
My first post, and I'm hoping that someone will be able to help me with this.
For a few days now, I've been experiencing very slow broadband speeds (100kbps or less), in contrast to the 1.5 - 2Mbps that I would usually expect to get. I've been on hold to BT technical support for some time, and have got through twice, on both occasions being told that this is a widespread issue and to wait until the next day. However, I'm not seeing any improvement. I'm aware of the problems in Edinburgh and the North of England,but I'm in East Anglia.
speedtester.bt.com shows:
Your configured download throughput speed for this service is 135 k
and then:
Two consecutive attempts have failed to initialise an Assured Rate session for your service.Please raise a fault with your service provider stating that the Performance Tester tool indicated a problem with initialising your Assured Rate session. <script type="text/javascript">// paintProgressAndMessageTestBar(-1,""); paintProgressAndMessageOnBar(-1,'An Error has Occured! '); // </script>
My hub stats are:
ADSL line status
Connection information
Line state Connected
Connection time 1 day, 13:59:54
Downstream 1,504 Kbps
Upstream 448 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 15.0 dB / 19.0 dB
Line attenuation (Down/Up) 60.0 dB / 31.5 dB
Output power (Down/Up) 16.6 dBm / 11.9 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 4586 / 92
CRC Errors (Down/Up) 297 / 2147480000
HEC Errors (Down/Up) nil / 72
Error Seconds (Local) 221
I hope this is enough information, but I'll happily supply anything else if I can. The uptime of 1.5 days is the time since I was advised to restart / reset to defaults etc.
Thanks for any help.
Deej.

Once a line is stable and working well, it's best left running 24/7
Interventions like resets, replacing accelerators, unplugging the router etc. will cause line "flapping"
And the dslam sees this as instability, and in turn the BRAS lowers the IP profile ....
This is done to achieve stability, and decrease throughput purposefully, all done automatically.
What you have to do, is cure any line noise, plug directly into the master or test socket behind the NTE
faceplate, leave it connected and wait for the throughput to increase.
Very often a rock bottom IP may need a kick to get it out of the doldrums.
Eventually the noise margin will decrease, sync will increase, and IP profile go up.
Depending on how long the line has suffered impulse noise, will determine the time for SNR to come down.
Regardless of which type of phone you used to test quietline ... hum or crackle is a no-no.
It may be the cause of the problems. It could be REIN on the network portion of the connection or dslam
crosstalk, either way it needs to be reported as line noise before you can count it out of the equation.

Broadband speed is low.

Hi,
I did a speedtest on the 1st and it showed I was getting 16mb DL speed however in the past couple of days I have only been recieving 3-4mb sometimes even slower.
I checked my status through ADSL settings and was wondering if the noise on the line is the problem:
ADSL line status
Connection Information
Line state
Connected
Connection time
2 days, 01:26:37
Downstream
5,479 Kbps
Upstream
763 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Fast
Noise margin (Down/Up)
31.1 dB / 10.3 dB
Line attenuation (Down/Up)
18.9 dB / 7.8 dB
Output power (Down/Up)
35.0 dBm / 1.1 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
0 / 0
CRC Errors (Down/Up)
7 / 0
HEC Errors (Down/Up)
2 / 0
Error Seconds (Local/Remote)
7 / 0
Thanks.
Tom.

HI welcome to the forum
Yes your noise is the problem that has risen because of disconnections
can you please try the quiet line test at the test socket located inside the master socket dial 17070 select option 2 you should hear no noise if you do then you need to phone bt faults on 151 and report a noisy line but do not mention broadband when you call increases in noise margin can also be caused by manually restarting the hub have you been doing that in the hopes of increasing speed if so please stop as restarts of the hub are the worse thing you can do this link may also help the post by RogerB gives lots of suggestions to try as well http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Low Broadband speed = line fault?

Hi,
We have had a very slow download speed since the high winds started last week (live in a rural area about 1 mile from exchange).
I have run through the BT Broadband speed wizard & not improved the speed.
ADSL Speedtest results are:
Download speed achieved - 194Kbps
                           Acceptable = 50-250Kbps
                           DSL 3424Kbps (downstream)
          448Kbps (upstream)
                           IP Profile = 250Kbps
Now, I don't know what it was before - but this appears to me to be pretty slow!
If I understand the notes correctly? for 3424Kbps we should be getting 600 to 7150Kbps throughput speed?
All I know, is that pages are taking an age to load...
Any thoughts on what to do next please?
PS After restarting the Hub 2.0, we got the following results:
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 1:20:46
Downstream
5,120 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
12.3 dB / 23.0 dB
Line attenuation (Down/Up)
48.0 dB / 29.0 dB
Output power (Down/Up)
19.7 dBm / 11.9 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
2701 / 0
CRC Errors (Down/Up)
64 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
16
Appears faster on paper - but still as slow loading pages!
Solved!
Go to Solution.

Hi again,
As promised, we have left on 24/7 & not re-set etc. Although it seems to have re-set itself a few times.
I am amazed at the low 480 Kbps speed! It is usually around 5400 Kbps...
Test1 comprises of Best Effort Test
Download Speed
243 Kbps
0 Kbps
500 Kbps
Max Achievable Speed
Download speedachieved during the test was - 243 Kbps
For your connection, the acceptable range of speeds is 50-500 Kbps.
Additional Information:
Your DSL Connection Rate :480 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 350 Kbps
ADSL line statusConnection information
Line state
Connected
Connection time
1 day, 15:47:51
Downstream
480 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
29.3 dB / 19.0 dB
Line attenuation (Down/Up)
47.0 dB / 29.0 dB
Output power (Down/Up)
15.3 dBm / 11.9 dBm
Loss of Framing (Local)
14
Loss of Signal (Local)
28
Loss of Power (Local)
0
FEC Errors (Down/Up)
26086 / 1
CRC Errors (Down/Up)
1766 / 2147480000
HEC Errors (Down/Up)
nil / 1
Error Seconds (Local)
7085

Broadband Speed Issues

I've been having an issue for the last few weeks with my broadband speed, as it has suddenly become very slow. I contacted the BT broadband support and they did some tests on the line and they came back fine. I then moved the connection from the master socket to the test socket re-did the speed test and the results were exactly the same as the master socket. So support seemed to think it maybe something to do with the ADSL filters and are going to send me some new ones. The connection is now back in the master socket.
I've done a phone test using a handset and there did not seem to be any interference on the line. So I googled around and started wondering if I'd been banded. I've recently moved (about 6 weeks ago) from BT broadband option 2 to BT Broadband option 3 which could have coincided with when the problem started, but I'm not 100% sure that this is the case. I was thinking maybe I've been banded since moving to option 3. I've not maintained a steady connection since my move to option 3 as my router is switched off every night. So I've now maintained a steady connection (connected to the master socket) for a over a day however the stats show no sign of improvement. I'm going to maintain this connection for 3 days as suggested in other threads to see if the stats improve. I just thought I would post to see if anybody had any other ideas, any advice would be greatly appreciated.
Download speedachieved during the test was - 0.25 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
IP Profile for your line is - 0.25 Mbps
Upload speed achieved during the test was - 0.62Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
ADSL line status
Connection information
Line state
Connected
Connection time
1 day, 17:05:57
Downstream
283 Kbps
Upstream
864 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
14.7 dB / 13.3 dB
Line attenuation (Down/Up)
46.5 dB / 27.8 dB
Output power (Down/Up)
0.0 dBm / 12.8 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
53894 / 0
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 0
Error Seconds (Local)
0

I've now maintained a connection for over 5 days but still seem to be on a banded profile there does seem to have been some errors and some signal loss but it does not seem to have been enough to have reset the clock. Is there anything else I can do to improve the speed or is it just a case of maintaning a connection until the speed decides to improve?
ADSL line status
Connection information
Line state
Connected
Connection time
6 days, 0:56:25
Downstream
283 Kbps
Upstream
864 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
14.9 dB / 13.4 dB
Line attenuation (Down/Up)
46.5 dB / 27.8 dB
Output power (Down/Up)
0.0 dBm / 12.8 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
1
Loss of Power (Local)
0
FEC Errors (Down/Up)
138001 / 0
CRC Errors (Down/Up)
14 / N/A
HEC Errors (Down/Up)
N/A / 0
Error Seconds (Local)
2

Re: Slow Broadband Speed

I am having the same type of problems I just joined BT from another provider as they have cut my broadband speed in more than half since July the 1st 2012 I live in a small Welsh Vallley called Gilfach Goch. I have two seperate internet lines into this house one with BT and one with Sky they have both has their speed cut by more than half I spoke with a BT engineer at the local exchange today who told me that BT know that there are severe Broadband problems here in Gilfach but that the BT management is refusing to allow engineer's to track and repair the fault. So all I can say is that unless BT does it's job and repairs the fault in this area I will not pay them for such a extremely poor levell of service and I would also suggest that people start complaining to Ofcom about the service issues as I most certainly will be.

As you can see from above the BT Mods do not appear to like the truth being told about how bad BT service is in essence you must not say anything bad about BT. I can honestly say that I do not suffer from the rose tinted spectacles of the Mods myself as someone else has pointed out that BT make you sign an 18 month contract in advance I will point out now that BT if they are providing less than the service that you agreed to and were receiving prior to signing said contract will be in breach of their own terms and conditions and they are also liable under the Goods and Services act which states that a company must provide the agreed to service in a reasonable time frame and with due care. If this is not the case then they potentially face a claims for damages against them and they would have to explain their lack of services in a open court room you can file these types of claims using the Money claim online service should the individual choose to do so and you would of course have to be prepared to argue your case and pay the required fees. As I have already been informed that BT knows about the problems here in Gilfach and is not willing to do the required repairs to deal with the loss of services this clearly puts them in a breach of contract situation and potentially liable for said damages as well as a fomal complaint to the Telephone regulator ofcom finally it is up to the individuals own choice as to what course of action they choose to take whether they wish to continue paying for poor service or trying to deal with it the facts around here speak for themselves.

Difference between BT Broadband Speed Test and all...

I have recently moved to BT Broadband from TalkTalk as I was dissatisfied with the speeds that I was getting with my TalkTalk line – they were OK outside of peak time but woeful in peak time. With TalkTalk, I was on their ‘up to’ 8Mbps which, in practice, translated to about 6Mbps for download outside peak times but dropped to below 1 Mbps in peak (around 500Kbps and sometimes even lower!) – these measurements were taken regularly with both the TalkTalk and Think Broadband speed tests which were usually roughly in agreement and I haven’t had to rely on memory as I downloaded the spreadsheet records available to Think Broadband registered users.
I am now posting this in the hope that somebody can explain the difference between the BT Broadband Speed Checker (Here) and all the others available on the web.
When you are first connected to BT Broadband they warn you that your speeds will vary over the first ten days while they test your line to ascertain optimum speeds for it. During that time, I checked it every day early, mid-day and evening (usually around 0630, 1230 & 2000 hrs) with Think Broadband and, yes, it did vary – the first day it started at around 1Mbps for download but rose to 10Mbps by the end of the day. On the second day, it rose to a peak of 17.8Mbps which was unbelievably fast to use (well, to me anyway) but never reached that speed again as over the rest of the ‘test period’, the download speed dropped and dropped to the point where I am now outside of the BT test period and consistently seeing only 2 to 2.5Mbps over a 24 hour period.
I emphasise that those speeds were all recorded using Think Broadband but I am now doing tests using the BT checker mentioned above and the speeds which BT indicate for downloads are consistently in the 14 to 18 Mbps range. If I do the BT and TB test in quick succession, they generally show the BT calculated speed to be better than that of TB by a factor of around 7 (ie. TB at 2 Mbps whilst BT show 14Mbps). Now either they are measuring different things (or the sams things differently) or one of them is lying – all I know is that my general browsing experience is slower outside of peak times and I can tell by the time it takes to load pages.
I might have misunderstood something in these tests but I am now beginning to regret that I fell I for the BT sales pitch which promised me ‘up to’ 20 Mbps but ‘more likely’ 17 Mbps. I have tried to discuss thisl with BT Broadband technical support but they were no use whatsoever – indeed, I got the impression that he was reading from a script and as it didn’t cover my issue, I was wasting my time – it would also have helped for English to be his first language!
According to the BT test, I am well within their ‘minimum guaranteed access speed’ (Here). for my area (about 4Mbps) and therefore cannot do anything about it. BUT that is only when measured using the BT speed tester – with any other, I am well below. I am beginning to feel very conned and might even start looking to withdraw from BT if I cannot get this settled.
Can anybody help. I will happily post detailed records of my various tests or router stats if they will help.
Thanks in advance.

OK, I have now done all the tests etc. And here are the results:
ADSL Line Status from HomeHub 3
Connection Information
Line state:
Connected
Connection time:
0 days, 00:27:11
Downstream:
23.71 Mbps
Upstream:
1.176 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
3.4 dB / 6.4 dB
Line attenuation (Down/Up):
5.3 dB / 2.1 dB
Output power (Down/Up):
19.4 dBm / 11.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
41 / 24
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
20 / 7
Error Seconds (Local/Remote):
61 / 13
BT Speed Test Result
Download Speed: 6.59Mbps
Acceptable Range: 4Mbps - 21 Mbps
IP Profile: 21.42Mbps
Upload Speed: 0.99Mbps
Upstream IP Profile: 0.83 Mbps
Think Broadand Speed Test
Download Speed: 1.8 Mbps
Upload Speed: 0.9 Mbps
Uswitch Speed Test
Dowload Speed: 1.7 Mbps
Upload Speed: 0.9 Mbps
For what it's worth, I followed the guidelines for the BT test and took all of the tests within a 10 minute period.
All I know is that my daytime BT connection is nowhere near as fast as I had from TalkTalk. Indeed, it was not even quick enough to watch non-HD YouTube videos earlier this morning without freezing to buffer.

Recent drop in broadband speed

Hi,
I've been with BT approx 2 months now (since I moved into my new house) and have usually got a speed of ~2Mbps.
However over the past few days I've noticed an obvious drop in speed.
I've run the BT Speed Test and here are my results:
Download speed achieved during the test was - 674 Kbps
For your connection, the acceptable range of speeds is 200-1000 Kbps.
Additional Information:
Your DSL Connection Rate :3136 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 750 Kbps
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 08:31:23
Downstream:
3.063 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
7.6 dB / 24.0 dB
Line attenuation (Down/Up):
49.3 dB / 25.0 dB
Output power (Down/Up):
19.5 dBm / 12.3 dBm
FEC Events (Down/Up):
62486 / 30
CRC Events (Down/Up):
145 / 26
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
2501 / 4
Error Seconds (Local/Remote):
245 / 94
Is anyone able to offer any advice on what the problem may be?
I'm on BT Unlimited Broadband (up to 20Mb) and the speed is so bad that I can barely use BBC Iplayer without buffering for ages.
Thanks

Hi Welcome to the forums
youe speed has dropped because of disconnections of your hub causing a drop in your ip profile if you do the following then we can help you further
If you post the full stats from your router
For homehub – type 192.168.1.254 into your browser
Navigate to ADSL Settings or use the A-Z at the top right of the home page and scroll down to ADSL Settings and click on it
Click on More Details and then post the full results.
also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Broadband Speed slowed to a crawl all of a sudden

Hi,
My broadband speed is currently 0.04mbps according to speedtest.net, I have been unable to complete the BT speed test because it is so slow, I get the following error:
"We haven't been able to complete the speed test at this time.
This may be due to a problem with the speed tester, or your line may be running very slowly."
I have disconnected all other devices and closed any application using the internet on my PC. I can confirm nothing else on my PC is using the connection because I am monitoring the traffic.
All I can give you is my router stats:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
5 days, 18:58:00
Downstream:
15.43 Mbps
Upstream:
1.14 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.7 dB / 6.2 dB
Line attenuation (Down/Up):
25.2 dB / 11.7 dB
Output power (Down/Up):
20.4 dBm / 11.8 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
121762 / 32
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
239648 / 7
Error Seconds (Local/Remote):
2171 / 0
Thanks

Hi Reed_Richards,
The OP was trying to use the BT Retail speedtester (http://diagnostics.bt.com/login/?workflow=Speed) which does sometimes not work if the throughput speed is to slow.
The BT Wholesale speed tester at http://speedtest.btwholesale.com should work though.
@remondo,
As well as what Reed_Richards and I have said, is there any known issues at your local exchange? Check via these websites:
1) http://bt.custhelp.com/app/answers/detail/a_id/15036
2) http://btbusiness.custhelp.com/app/service_status
3) http://usertools.plus.net/exchanges/?
4) http://usertools.plus.net/exchanges/mso.php
Cheers
I'm no expert, so please correct me if I'm wrong

Broadband Speeds Have Dropped

Over the last few days our broadband speeds have dropped from 14mbps to now only getting 3.5mbps, this has happened after the technical staff told us they had fiixed a fault on our line. We are using a BT home hub 2.0
Here are the results from the tests:
Download Speed
3.71 Mbps
0 Mbps
4 Mbps
Max Achievable Speed
Download speedachieved during the test was - 3.71 Mbps
For your connection, the acceptable range of speeds is 1.2 Mbps-4 Mbps.
IP Profile for your line is - 3.99 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.34 Mbps
0 Mbps
0.83 Mbps
Max Achievable Speed
Upload speed achieved during the test was - 0.34Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
ADSL line status
Connection Information
Line state
Connected
Connection time
0 days, 18:05:53
Downstream
4,525 Kbps
Upstream
440 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.5 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
23.0 dB / 26.4 dB
Line attenuation (Down/Up)
22.6 dB / 7.8 dB
Output power (Down/Up)
8.4 dBm / 1.3 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
9 / 0
CRC Errors (Down/Up)
0 / 0
HEC Errors (Down/Up)
0 / 0
Error Seconds (Local/Remote)
0 / 0

Hi Welcome to the forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Broadband speed slow

My Broadband speed is nowhere near what is advertised.
Is there anything I can do to improve things?
BT Home Hub 3
ADSL Line Status
Connection information
Line state:    Connected
Connection time:    12 days, 15:45:27
Downstream:    5,184 Kbps
Upstream:    448 Kbps
ADSL settings
VPI/VCI:    0/38
Type:    PPPoA
Modulation:    G.992.1 Annex A
Latency type:    Interleaved
Noise margin (Down/Up):    7.8 dB / 17.0 dB
Line attenuation (Down/Up):    48.5 dB / 31.0 dB
Output power (Down/Up):    19.3 dBm / 12.6 dBm
FEC Events (Down/Up):    36918351 / 3940
CRC Events (Down/Up):    64685 / 3271
Loss of Framing (Local/Remote):    0 / 11
Loss of Signal (Local/Remote):    5 / 11
Loss of Power (Local/Remote):    0 / 0
Loss of Link (Remote):    0
HEC Errors (Down/Up):    763004 / 3343
Error Seconds (Local/Remote):    0 / 0
Broadband Speed Test
at 11:20 14th March 2014
From Exchange   5.18Mb
At PC Download   4.54Mb
           Upload   0.36Mb
Quiet Line Test is quiet, no noise.
Master Socket is where the phone line enters the house.
Solved!
Go to Solution.

welcome to the forum where customers help customers
your conenction speed appears about what I would expect for someone with an attenuation of 48/49db on adslmax
your download speed appears consistent with your connection speed suggesting that your ip profile is correct
check speed here
check speed
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Broadband Speed Experiment

Hi I'm going to start posting daily stats in an attempt to prove to BT that the quality of the Broadband they are supplying me is substandard. For info, I am currently connected to the test socket with a brand new filter and ethernet connection to my Mac. ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
11 days, 22:14:36
Downstream:
1.117 Mbps
Upstream:
967.9 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
14.7 dB / 5.6 dB
Line attenuation (Down/Up):
54.0 dB / 30.9 dB
Output power (Down/Up):
15.0 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
294994 / 7264
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
89667 / 4507
Error Seconds (Local/Remote):
53793 / 5512
Broadband Speed Test: Results
1.14Mb
Download
0.96Mb
Upload
0.77Mb
The connection speed between your telephone exchange and your Home Hub could be improved. Try using the tips below and then re-test your speed.
The speed coming into your house
The speed you get at your computer
Connection speed 1.14Mb
Could be improved
Download speed
0.96Mb
Upload speed
0.77Mb
Poor
Solved!
Go to Solution.

Router reset. Stats below:
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:10:13
Downstream:
1.117 Mbps
Upstream:
999.9 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
18.6 dB / 6.2 dB
Line attenuation (Down/Up):
53.9 dB / 30.8 dB
Output power (Down/Up):
15.0 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
97 / 53
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
47 / 15
Error Seconds (Local/Remote):
24 / 11

Loss of broadband speed

Similar Messages

Maybe you are looking for