Loss of connected email

The other day, I noticed that my facebook icon had randomly disappeared from my applications. I tried to redownload it through the browser multiple times, but it never showed up as being on my phone. I also tried going to the BlackBerry World app store to download it there. It said there that it was uninstalled, so I tried to reinstall it. I ran into problems because I did not have my password for my BlackBerry ID. I tried to say that I forgot password and recover it, but I no longer have access to the associated email address because it was my college email address and was disabled shortly after I graduated. Now I have no way to change the email because I can't log-in in the first place.
Is there a way to recover my password without that email? I have tried making a new BlackBerry ID with my current email, but it says that it is not associated with my phone and will not work.
I tried using support on twitter, but they were taking me in circles as I've already tried what they suggested. Hopefully using more characters also me to better explain my situation.
My phone uses OS 6.0, if that's helpful.

To change things on your own, you'll need access to your previous email account. Since you don't have access to it, give AT&T a call and see if they can help. I know carriers can often resolve issues related to passwords and they're quite good at helping out with BlackBerry ID issues.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

Loss of connection

Today i lost connection to the internet, the broadband light was flashing orange. I reset the Modem and the Hub and the Hub broadband light returned to blue. But my desktop pc had a big red cross in the bottom right hand corner over the network icon. I had disconnected the ethernet cables in the back of the hub, but they were all connected properly. When i looked at the back of my pc the end on the connection end did seem a little dodgy. So i recrimped a new end on and that did appear to sort it. But on the desktop i cannot open hardly any web pages they are so slow, i can't do any speed tests as i get timed out out.
I have hooked up my laptop using the same ethernet cable and everything is perfect, speeds test are all as they should be.
It seems the issue lies with my desktop pc, but everything was working perfectly ok before the loss of connection, i have tried severeal browsers and none of them seem to want to respond very well at all.
Has anybody got any suggestions or solutions please???

Hi Damian99,
Thanks for posting. It sounds like the problem could be with your PC as it’s connecting via the laptop. Has anything changed since the connection dropped? Have you checked the Ethernet socket as opposed to the cable? Let us know how you get on.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Losing broadband connection / Email query

I've had BT Broadband for several months with no problems. Since returning from a week's holiday ( hub left on) I have noticed that the blue 'b' light has turned to orange several times and connection has been temporarilly lossed. It has, within minutes, sorted itself. I have also received messages saying that my BTYahoo Email account could not be detected (I have previously had this message on my Ipod but the account functioned properly) Despite this message, my Email account continues to be OK. It might be my imagination, but it seems that the loss of connectivity coincides with logging in to my Email account.

welcome to the forum
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) BT Speedtester and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Why does my iphone loss WIFI connection when I leave the room? When other mobile devices stay connected?

Why does my IPhone loss WIFI connection when I leave the room? When other mobile devices stay connected?
I can not send text messages to other IPhones if I do not have wifi or 3G on, the texts are sent as emails.

Hey Linders1987,
Welcome to the Apple Support Communities! I understand that you are experiencing issues with Wi-Fi on your iPhone 5. The following resource may provide a solution:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
http://support.apple.com/en-us/TS1398
Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including
- previously connected Wi-Fi networks and passwords
- recently used Bluetooth accessories
- VPN and APN settings
Thanks,
Matt M.

HT1222 Ipad2 losses cell connection now that iOS 8 was installed. Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!

Ipad2 losses cell connection now that iOS 8 was installed. Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!

Hey everyone-
Im in the same boat, started a thread . My hands free system worked fine with iOS 8 out of the box new iphone 6. Did the update this morning and i can stream music perfectly fine however i cannot make or receive calls through hands free system.
I have not tried resetting the settings like most people indicate is working. I feel like I shouldn't have to reset anything, even less mess with settings with an update coming from apple. it should "Just Work"
Some people who reset said it works for a few hours, other say it don't work, and I don't know what I should do.
Car: Hyundai Sonata 2014
NOTE: I was able to replicate the issue in my wifes Hyunday Elentra 2013.
This is how I know its not a defect with the BT in my car.

Sensing a loss of connection without explicitly sending a message

First I need to know if I am even on the right forum since I don't have a clue whether the Sun Java System Message Queue and the Sun ONE Message Queue, v3.0.1 are the same animal. Since there was no forum for the Sun ONE Message Queue I'm assuming they are one and the same. If not let me know.
We are attempting to sense a loss of connection to the JMQ broker by attempting to create a session against an already established Connection object. The theory is that createSession will fail if the connection is down but it doesn't seem to be working. We don't want to have to explicitly send a message on the down connection to trigger an exception but if we absolutely have to we will. We are periodically checking the status of many connections and would prefer to not spend too much time at it. I also considered using Connection.start() to see if perhaps "re-starting" an established connection would generate an exception if the connection is down. If anyone knows how the pros at SUN do this, I would appreciate the knowledge very much.

Hi, did you get a proper answer to your question? We're also trying to detect loss of connection on the client side: shall we have to use the session creation or is there a way to sense the loss of the connection as soon as it happens? We've tried setting an exception listener on the connection, but that didn't help.
Thanks.

WLC 5508 intermittent loss of connectivity

Hi.
I have a WLC 5508 connecting directly to a distribution switch (3850) via a layer 2 etherchannel trunk fibre link with LAG enabled on the WLC.
Whenever there is a loss of power to the server room where both devices are hosted & power later gets restored, the distribution switch & WLC lose Layer 2 & 3 connectivity. Connectivity only gets restored when the WLC is power cycled or the fibre cables connecting to its SFP ports are removed & plugged back in. When this is done connectivity is restored between them, APs associate etc. Once there is a loss of power to the room for whatsoever reason again, the loss of connectivity issue re-occurs.
Disabled the etherchannel at some point, using only a single fibre trunk link between them, but the issue persists.
Also check for interface errors, CRCs, etc on both ends but there are none.
Can anyone please advice me on what the issue is & what can be done to permanently resolve this?
Thanks in anticipation.
Ope.

Software version is 7.4.100.0
int gig1/0/5
switchport mode trunk
switchport trunk encapsulation dot1q
channel-group 1 mode on
int gig1/0/6
switchport mode trunk
switchport trunk encapsulation dot1q
channel-group 1 mode on
Port setting on the switch is set to auto-negotiate. Port setting on the controller is "auto". The link has been negotiated (& always negotiates) to 1000Mbps full duplex on both ends.
Presently in transit with no way of connecting to the device, but I checked the duplex & speed settings on both devices which was appropriately negotiated. Also checked for interface error counters on the switch, there was none. Checked the WLC logs too, there were no logs on issues with the interfaces or auto-negotiation.

InDesign CC keeps crashing after reporting loss of connection

Hi Everyone,
I am working over a local network and when i create an indesign file (or work on an existing one), InDesign reports a loss of connection (or an other process changing the file) and crashes. This happens after a very short time, between 1-5 minutes after opening a file.
It makes me unable to finish any job! Please do not tell me to work local, because thats not the solution for me.
The internet connection is stable and has no delay. I work in Windows 7, InDesign CC.
I reset the preferences already, changed the location for automatic saves... nothing
Thanks,
Nora

Hi Yeonala,
As mentioned by Peter correctly, your LAN connection maybe one of the reasons for this behavior.
Beacuse when InDesign try to Edit Or Save remote document in disconnected state, it shutdowns as protective measure.
However, can you please provide more detail about "changed the location of automatic saves" ?
Thanks
-Sumit

Frequent loss of connection with HH5

I upgraded to infinity and got a HH5 a few weeks ago. Initially it was great, stable and down load up to 26 Mbps. Now, I lose the connection several times each day and this evening it dropped the connection about 4 times in an hour. The speed now is down to 9 Mbps. Any ideas on what is wrong or what I can do?

Thank you for your comments.
Speed is not the problem, now up to 18000 in any case. It is loss of connection. I don't understand computers so not sure what information you requested. Here is most recent event log details if that would help.
Recorded events
Time and date
Message
08:46:56, 27 Mar.
( 3952.750000) Admin login successful by 192.168.1.69 on HTTP
08:46:05, 27 Mar.
( 3901.760000) New GUI session from IP 192.168.1.69
08:43:38, 27 Mar.
( 3754.430000) Lease for IP 192.168.1.69 renewed by host Robbie-PC (MAC 00:1d:e0:9c:f5:ff). Lease duration: 1440 min
08:43:38, 27 Mar.
( 3754.430000) Device connected: Hostname: Robbie-PC IP: 192.168.1.69 MAC: 00:1d:e0:9c:f5:ff Lease time: 1440 min. Link rate: 0.0 Mbps
08:43:38, 27 Mar.
( 3754.360000) Lease requested
08:43:34, 27 Mar.
( 3750.960000) Lease for IP 192.168.1.69 renewed by host Robbie-PC (MAC 00:1d:e0:9c:f5:ff). Lease duration: 1440 min
08:43:34, 27 Mar.
( 3750.960000) Device connected: Hostname: Robbie-PC IP: 192.168.1.69 MAC: 00:1d:e0:9c:f5:ff Lease time: 1440 min. Link rate: 0.0 Mbps
08:43:34, 27 Mar.
( 3750.890000) Lease requested
08:43:34, 27 Mar.
ath10: STA 00:1d:e0:9c:f5:ff IEEE 802.11: Client associated
08:43:11, 27 Mar.
ath10: STA 64:a3:cb:23:81:b2 IEEE 802.11: Client disassociated
08:42:59, 27 Mar.
( 3715.660000) Lease for IP 192.168.1.67 renewed by host 2058243s-iPad (MAC 64:a3:cb:23:81:b2). Lease duration: 1440 min
08:42:59, 27 Mar.
( 3715.660000) Device connected: Hostname: 2058243s-iPad IP: 192.168.1.67 MAC: 64:a3:cb:23:81:b2 Lease time: 1440 min. Link rate: 130.0 Mbps
08:42:59, 27 Mar.
( 3715.590000) Lease requested
08:42:59, 27 Mar.
ath10: STA 64:a3:cb:23:81:b2 IEEE 802.11: Client associated
08:33:37, 27 Mar.
ath10: STA 00:62:2c:39:bb:dd IEEE 802.11: WiFi registration failed
08:33:22, 27 Mar.
ath10: STA 64:a3:cb:23:81:b2 IEEE 802.11: Client disassociated
08:33:10, 27 Mar.
( 3127.240000) Lease for IP 192.168.1.67 renewed by host 2058243s-iPad (MAC 64:a3:cb:23:81:b2). Lease duration: 1440 min
08:33:10, 27 Mar.
( 3127.240000) Device connected: Hostname: 2058243s-iPad IP: 192.168.1.67 MAC: 64:a3:cb:23:81:b2 Lease time: 1440 min. Link rate: 130.0 Mbps

Loss of connection issues ongoing

Hi all
I'd like to start by saying I've had this issue for many months now and I guess this is my last try at getting a fix.
I'm using Verizon dsl connected through a wired westell 6100g modem.
I'm using Windows 7 home
Here is my problem.At random times when I'm browsing the internet my browser(firefox) will stop working,If I'm able to hit refresh I get the "loss of connection webpage" My modem does not show any signs of disconnection (no red lights no blinking) The internet icon on the windows taskbar says I am connected to the internet and if i click to troubleshoot the connection it finds no errors. But I cannot access the internet from any browser I have..
I had this very same issue when I was using Vista And after wasting money on 3 new modems Verizon told me that installing Windows 7 would fix my problem.Which wasn't true.
The only way for me to get back on line is to restart my computer,not my modem.
I've had many tests on my line.I've had dell go into my computer remotely to try to see if it's a internal issue Nobody can find anything wrong..At least I hope they are telling the truth.
I disabled ip6,firewall,I tried 3 different modem,cat5 cables,filters..I checked to make sure my ip addy match,flushed the dns..I
I've tried every suggestion that i've been given and nothing works,The last thing I was told was Westell 6001g are NOT vista and windows 7 compatable...I have no idea if thats correct.I've wasted far too much time and money the past months on this issue.I'm just about ready to face the fact that I'm going to be restarting my pc half the time I'm using it.
Does anyone have any idea or have the same issue? And if it is the modem..Can anyone suggest a wired one that would work?
Oh btw when this does happen I CAN use cmd and ping a website..with no packet loss

My ip from the website matches the one shown on the modem page but not the one shown in the cmd.
i noticed i have 00-00-00-00-00-00-00-E0 as a physical address not sure if that is a problem or not.I don't see where it says what firmware i have tho.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ipconfig/all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : April-PC
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : westell.com
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : westell.com
   Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
   Physical Address. . . . . . . . . : 00-24-E8-20-32-5A
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : xxxxxxxxxxxxxxx(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Monday, January 04, 2010 12:28:12 AM
   Lease Expires . . . . . . . . . . : Tuesday, January 05, 2010 12:28:11 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.westell.com:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : westell.com
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::840:3314:b7be:3c6a%12(Preferred)
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 301989888
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-C6-D0-7D-00-24-E8-20-32-5A
   NetBIOS over Tcpip. . . . . . . . : Disabled

Intermittent loss of connection

For about a week now I have been suffering from a intermittent loss of connection to the internet the internet will be fine until it randomly decides to drop out. Usually I'll be surfing the website and go to navigate to another webpage when it times out and tells me it couldn't find the website in question. My games seems to be affected as well though it is more common for me to observe this in my browser the problem occurs in Firefox and I loaded Chrome as well one day and the problem appears there as well. I need some line quality tests with dslreports.com's line quality test and I did four of them they all reported intermittent packet loss the odd thing I noticed is in all four tests I did the same node suffered a varying amount of packet loss (ae-1-60.edge1.SanJose3.Level3.net) I have been trying to get some info on this server but I can't seem to find any info on it whatsoever I have included all four tests in the zip archive attached to this post.
I also did a fifth test which I included as well I did this test after resetting the router and did another test but it was much of the same. Please tell me how to troubleshoot this problem I am losing my mind and patience.
Line Quality Test 1
Line Quality Test 2
Line Quality Test 3
Line Quality Test 4
Line Quality Test 5

I've been having a simliar issue as well for about a month now where my internet drops out every now and then for several seconds and then comes back up. This only started happening after Hurricane Sandy in Staten Island, NY when my ONT had to be replaced after being flooded. Since then, I have already had my ONT replaced twice and was given a new REV I router and told to not send back my old REV D router which never had any problems before. I have even tried putting back the REV D router and I still kept losing internet every now and then. After multiple chats with Verizon, they seem to have pinpointed the problem to be a physical issue in my house. So, I tried connecting the REV I router directly to the ONT, via coax, and I still noticed the internet dropping. Looking at the router logs, I noticed the following entries every now and then (usually multiple times a day):
Jan 10 00:29:15 2013
System Log
WAN ETH
WAN Ethernet Link Up
Jan 10 00:29:14 2013
System Log
WAN Coax
WAN Coax Link Up
Jan 10 00:29:10 2013
System Log
WAN ETH
WAN Ethernet Link Down
Jan 10 00:29:10 2013
System Log
WAN Coax
WAN Coax Link Down
and
Jan 8 04:35:26 2013
System Log
WAN Coax
WAN Coax Link Up
Jan 8 04:35:26 2013
System Log
WAN ETH
WAN Ethernet Link Up
Jan 8 04:33:42 2013
System Log
WAN ETH
WAN Ethernet Link Down
Jan 8 04:33:41 2013
System Log
WAN Coax
WAN Coax Link Down
Looking at the advanced logs I ocassionally find the following entries associated with the link flapping:
2013/01/08 04:33:44.12 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
2013/01/08 04:33:44.12 M mt_igmp_params_init:235: reconf: new wan interface: eth1
2013/01/08 04:33:44.20 M clink1: link down, device will be down
2013/01/08 04:33:44.24 M lan if uninit br0
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 16
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 8
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 4
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 2
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 1
2013/01/08 04:33:44.24 M removing multicast group 224.0.0.1 from device br0 port 0
2013/01/08 04:33:44.24 M uninit igmp proxy module
2013/01/08 04:33:44.24 M init igmp proxy module
2013/01/08 04:33:44.24 M lan if init br0
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 0
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 1
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 2
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 4
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 8
2013/01/08 04:33:44.24 M adding multicast group 224.0.0.1 to device br0 port 16
2013/01/08 04:33:44.31 M jan  8 04:33:43 syslog: check_exit: exiting
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:45.10 M @@ setting new value completed, it should show new value in proc/proxy
2013/01/08 04:33:45.12 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
2013/01/08 04:33:45.20 M eth1: link down, device will be down
2013/01/08 04:33:45.26 M lan if uninit br0
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 16
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 8
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 4
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 2
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 1
2013/01/08 04:33:45.28 M removing multicast group 224.0.0.1 from device br0 port 0
2013/01/08 04:33:45.28 M uninit igmp proxy module
2013/01/08 04:33:45.28 M init igmp proxy module
2013/01/08 04:33:45.28 M lan if init br0
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 0
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 1
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 2
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 4
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 8
2013/01/08 04:33:45.28 M adding multicast group 224.0.0.1 to device br0 port 16
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:33:46.10 M eth1: stopped
2013/01/08 04:33:46.10 M eth1: mac address changed
2013/01/08 04:33:46.10 M port 0: setting mac to 0x1, status: 0x2c3d
2013/01/08 04:33:46.10 M eth1: link up
2013/01/08 04:33:46.10 M eth1: started
2013/01/08 04:35:27.24 M eth1: link up, device will be up
2013/01/08 04:35:27.54 M clink1: lof 1000mhz
2013/01/08 04:35:27.55 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
2013/01/08 04:35:27.63 M clink1: link up, device will be up
2013/01/08 04:35:27.63 M lan if uninit br0
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 16
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 8
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 4
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 2
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 1
2013/01/08 04:35:27.63 M removing multicast group 224.0.0.1 from device br0 port 0
2013/01/08 04:35:27.63 M uninit igmp proxy module
2013/01/08 04:35:27.63 M init igmp proxy module
2013/01/08 04:35:27.63 M lan if init br0
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 0
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 1
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 2
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 4
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 8
2013/01/08 04:35:27.63 M adding multicast group 224.0.0.1 to device br0 port 16
2013/01/08 04:35:28.10 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
2013/01/08 04:35:28.10 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:28.12 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:36.79 M mt_igmp_params_init:223: reconf: new lan interface: br0, ver 3
2013/01/08 04:35:36.79 M mt_igmp_params_init:235: reconf: new wan interface: eth1
2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew ip address: 173.56.37.223
2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew netmask: 255.255.255.0
2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew gateway: 173.56.37.1
2013/01/08 04:35:36.85 M dhcp client: wan ethernet renew dns server: 208.67.222.222 208.67.220.220
2013/01/08 04:35:36.90 M lan if uninit br0
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 16
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 8
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 4
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 2
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 1
2013/01/08 04:35:36.90 M removing multicast group 224.0.0.1 from device br0 port 0
2013/01/08 04:35:36.90 M uninit igmp proxy module
2013/01/08 04:35:36.90 M init igmp proxy module
2013/01/08 04:35:36.90 M lan if init br0
2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 0
2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 1
2013/01/08 04:35:36.90 M adding multicast group 224.0.0.1 to device br0 port 2
2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 4
2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 8
2013/01/08 04:35:36.91 M adding multicast group 224.0.0.1 to device br0 port 16
2013/01/08 04:35:36.91 M out: [62] nat error: no free nat ip ([62] nat error: no free nat ip: )
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=br0  ifindex=9
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M igmprx_lan_port_add_single: ifname=eth0  ifindex=2
2013/01/08 04:35:37.19 M @@ setting new value completed, it should show new value in proc/proxy
2013/01/08 04:35:47.83 M acs ack: event = 4 value change
I setup syslog on the router which feeds it to the WallWatcher application and this is all the details I get duing the flap. I'm really stumped by this and can't figure out what the problem is. Could it be a bad PON card? I noticed that the logs show only the WAN Coax going down without the LAN Coax which leads me to believe in a faulty connection between the router and the ONT. I've already tried connecting both routers directly to the ONT to no avail. The only changes that I can think of since Sandy are the electrical outlets that were replaced. Could they be causing some kind of interference? I've tried running the coax with and without the ground block, but that didn't help either. The only thing that was not replaced since the first post-Sandy installation is the ONT battery system, only the battery itself was replaced once. Could that be it? Just to be clear, I have always been connected via coax and I have tried testing with different cables.

Methods to detect loss of connection with CRIO

I am developing an application with CRIO. The CRIO has an application in real time in which you are sharing a variable temperature. In my host PC I have an application that will receive this temperature and stored in a database. I need to detect the beginning of my program if present the CRIO and prompting a loss of connection and the system can not initialize.

This is the cRIO code. All it does is continuously update a variable that can be read by the HMI. It is important that this loop runs faster than the HMI loop to prevent false alarms.
The HMI code may look something like this. It is reading the variable being written to by the cRIO. If it does not change, the communication code is not running. You would probably want to do something if Comm's Lost goes true other than turn on an indicator.
There are many ways to do this and you may receive some better ideas from the forum.

Sudden loss of connection all together

I'll start off by saying hello to everyone.
We've had infinity installed for some time now. I'm talking many months, definitely more than 18. This is the first time we have encountered a sudden loss of internet connection. We have already called BT and followed all their steps but what the people at the call centre don't understand is we want to know WHY! Not the possibilities, a solid reason. I was always able to give this to our business customers when I worked first line support. We recently had a storm which I think is contributing, since going over everything many times and no joy I have wondered about the phone line. Since the loss of connection it has always got massive static interference on the line. The service updates say all is good, but I can't help but think that page is just nonsense and that it is at fault and that BT are too up themselves to admit the fault is their end.
Can anyone shed some light on this for me?
Thank you very much in advance.

Is anything shown here. http://usertools.plus.net/exchanges/mso.php
http://usertools.plus.net/exchanges/?
http://btbusiness.custhelp.com/app/service_status
http://bt.custhelp.com/app/answers/detail/a_id/15036
http://community.plus.net/exchange-information/
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Old Nokia 7610 Supernova always connected email

Is there a way that allows Nokia 7610 Supernova (or all other phones with the same firmware) to use ALWAYS CONNECTED email such as Gmail and not to terminate the connection after 10-15 mins........... pls help!

Hi velizarcho12345,
You need to configure the Internet settings on your phone. To define how to use the service, select Menu > Settings > Connectivity > Packet data > Packet data conn. and from the following options select Always online so that it will automatically connect to a packet data network when you switch the phone on. This also applies to phone applications that require Internet connection like email.

Frequent loss of connection to email server

Every few days, although not following any obvious useage pattern, one of my email accounts stops being able to connect to the mail server. To fix this, I have to delete the account, and then recreate it. I've tried every other suggestion or fix described in these pages and elsewhere - nothing but a delete and recreate works, and it's only temporary.
This is a fairly simple fix - however it is intensely irritating that I have to keep doing it. When the error occurs, I can still access the account via webmail, and can still receive and send from my PC to that account. So it's not the Mail Server being offline etc, just can't connect from my iPhone 5.
My other email accounts on the iPhone continue to function normally, so the Mail app is working.
A search of this community shows many different versions of this issue, which has persisted across iOS6 and 7 upgrades on the handset.
In short, I know how to resolve the problem - I really want to know why it occurs, and why I keep having to resolve it every week or so. I want to fix the problem once and for all.
If it helps, it's always the same mail account, which is an IMAP one (as are my other ones).
Any suggestions gratefully received! How do I raise a bug report with Apple, for example?
Thanks all...

A quick Google search does not yield anything. I have to assume in general Apple uses industry standard protocols (and they use the sticklers for using the actual protocol). Everytime I have had problems with wifi and Apple equipment (including the iPad) the solution was that the wifi router (or the servers handling the traffic) were found to need replacement (or re-programming). And this was not due to Apple. My latest issue was the hotel in Singapore. Both my PC laptop and iPad could not find the wifi signal even though the router was in the room. At first we went around rebooting and unplugging everything. Once past that silly step they agreed my equipment was fine but their server pay-wall was an issue (the hotel manager's iphone could not see the wifi either).
So probably an issue with the Cruise ship wifi routers, or their pay-wall servers to follow your computer (to be sure you have paid for your service).
Often the users equipment is blamed and Apple products in particular. But I suspect the majority of the time it is the wifi equipment.

Loss of connected email

Similar Messages

Maybe you are looking for