Loss of connection issues ongoing

Hi all
I'd like to start by saying I've had this issue for many months now and I guess this is my last try at getting a fix.
I'm using Verizon dsl connected through a wired westell 6100g modem.
I'm using Windows 7 home
Here is my problem.At random times when I'm browsing the internet my browser(firefox) will stop working,If I'm able to hit refresh I get the "loss of connection webpage" My modem does not show any signs of disconnection (no red lights no blinking) The internet icon on the windows taskbar says I am connected to the internet and if i click to troubleshoot the connection it finds no errors. But I cannot access the internet from any browser I have..
I had this very same issue when I was using Vista And after wasting money on 3 new modems Verizon told me that installing Windows 7 would fix my problem.Which wasn't true.
The only way for me to get back on line is to restart my computer,not my modem.
I've had many tests on my line.I've had dell go into my computer remotely to try to see if it's a internal issue Nobody can find anything wrong..At least I hope they are telling the truth.
I disabled ip6,firewall,I tried 3 different modem,cat5 cables,filters..I checked to make sure my ip addy match,flushed the dns..I
I've tried every suggestion that i've been given and nothing works,The last thing I was told was Westell 6001g are NOT vista and windows 7 compatable...I have no idea if thats correct.I've wasted far too much time and money the past months on this issue.I'm just about ready to face the fact that I'm going to be restarting my pc half the time I'm using it.
Does anyone have any idea or have the same issue? And if it is the modem..Can anyone suggest a wired one that would work?
Oh btw when this does happen I CAN use cmd and ping a website..with no packet loss

My ip from the website matches the one shown on the modem page but not the one shown in the cmd.
i noticed i have 00-00-00-00-00-00-00-E0 as a physical address not sure if that is a problem or not.I don't see where it says what firmware i have tho.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
C:\Windows\system32>ipconfig/all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : April-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : westell.com
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix  . : westell.com
   Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
   Physical Address. . . . . . . . . : 00-24-E8-20-32-5A
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : xxxxxxxxxxxxxxx(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Monday, January 04, 2010 12:28:12 AM
   Lease Expires . . . . . . . . . . : Tuesday, January 05, 2010 12:28:11 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.westell.com:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : westell.com
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::840:3314:b7be:3c6a%12(Preferred)
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 301989888
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-C6-D0-7D-00-24-E8-20-32-5A
   NetBIOS over Tcpip. . . . . . . . : Disabled

Similar Messages

  • Macbook Connectivity Issues -- Ongoing

    I have had problems with my girlfriends Macbook since she bought it. It connects to my wireless network (which has two other computers on it, one of them being my Powerbook G4, it also has an airport express connected). My Powerbook G4 has never had an issue, it can connect to all websites, it can connect and play music through the airport express and it can connect to other computers on the same network. Her Macbook connects to the router, can access most internet sites, it cannot connect to the airport express (it never has) it just attempts to connect but never does, also it can not connect to any other computer on the network. HOWEVER, everything works as it should (including the airport express) when I connect her computer to the router via an ethernet cable.. It has been to the apple store once already for this issue, they replaced the airport card. But it never fixed anything. In the past few days it will no longer to connect to most internet sites, including apple.com. It does connect to google.com and many others, but for some reason some of her more commonly used sites no longer respond. I can try it on her computer and get "Connection Timed Out", walk over to my Powerbook and connect to the site just fine. Both her Macbook and my Powerbook are running 10.5.6, both are fully updated. I would appreciate anyones help with this, I know what I am doing, have done everything I can think of to this computer to get it to work (including reinstalls, changing router settings, everything..).
    EDIT
    forgot to mention this problem also occurs on other wireless networks, not just mine. So I know its not my network/router.
    Message was edited by: Semidios

    I have this problem sometimes. Usually I try some combination of restarting the computer and/or restarting the wireless router. One time I had to do a hard reset of the router to make it work.

  • WLC 5508 intermittent loss of connectivity

    Hi.
    I have a WLC 5508 connecting directly to a distribution switch (3850) via a layer 2 etherchannel trunk fibre link with LAG enabled on the WLC.
    Whenever there is a loss of power to the server room where both devices are hosted & power later gets restored, the distribution switch & WLC lose Layer 2 & 3 connectivity. Connectivity only gets restored when the WLC is power cycled or the fibre cables connecting to its SFP ports are removed & plugged back in. When this is done connectivity is restored between them, APs associate etc. Once there is a loss of power to the room for whatsoever reason again, the loss of connectivity issue re-occurs.
    Disabled the etherchannel at some point, using only a single fibre trunk link between them, but the issue persists.
    Also check for interface errors, CRCs, etc on both ends but there are none.
    Can anyone please advice me on what the issue is & what can be done to permanently resolve this?
    Thanks in anticipation.
    Ope.

    Software version is 7.4.100.0
    int gig1/0/5
      switchport mode trunk
      switchport trunk encapsulation dot1q
      channel-group 1 mode on
    int gig1/0/6
    switchport mode trunk
    switchport trunk encapsulation dot1q
    channel-group 1 mode on
    Port setting on the switch is set to auto-negotiate. Port setting on the controller is "auto". The link has been negotiated (& always negotiates) to 1000Mbps full duplex on both ends.
    Presently in transit with no way of connecting to the device, but I checked the duplex & speed settings on both devices which was appropriately negotiated. Also checked for interface error counters on the switch, there was none. Checked the WLC logs too, there were no logs on issues with the interfaces or auto-negotiation.

  • HT1222 Ipad2 losses cell connection now that iOS 8 was installed.  Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!

    Ipad2 losses cell connection now that iOS 8 was installed.  Ios 8.0.2 did NOT correct the issue. Come on and fix this issue!

    Hey everyone-
    Im in the same boat, started a thread . My hands free system worked fine with iOS 8 out of the box new iphone 6. Did the update this morning and i can stream music perfectly fine however i cannot make or receive calls through hands free system.
    I have not tried resetting the settings like most people indicate is working. I feel like I shouldn't have to reset anything, even less mess with settings with an update coming from apple. it should "Just Work"
    Some people who reset said it works for a few hours, other say it don't work, and I don't know what I should do.
    Car: Hyundai Sonata 2014
    NOTE: I was able to replicate the issue in my wifes Hyunday Elentra 2013.
    This is how I know its not a defect with the BT in my car.

  • Ethernet connectivity issue with Microsoft Small Business Server (SBS)

    Just recently updated my OS to Yosemite, and am now having ongoing problems connecting to my company's Microsoft Small Business Server (SBS).
    I'm having no other issues connecting to outside server's via wifi or ethernet, but once I connect to our local business server I lose internet connection and also my email account goes offline (Microsoft Outlook 2011). Sometimes the connection will intermittently return, but will be very slow and won't load images. I had no connection issue's before the update.
    Anyone experienced a similar problem?

    "That depends on what what resources you use the server for."
    - I will be using the printer for print sharing and file sharing. There is an estimating application I will load on a Mac Mini and will want to share that to other desktops.

  • SFTP connection issue with Dreamweaver 2014

    I have a very weird SFTP connection issue with Dreamweaver CC (2014). I am on a Mac running 10.9.4 and have no problem connecting to my server through SFTP with Dreamweaver CS 6. However, using the exact same settings on CC (2014), I get the following error: "An FTP error occurred - cannot make connection to host. Your login or password is incorrect. Please check your connection information".
    I am truly at a loss here. Command line connection works without problems.
    Any thoughts?

    Hi there,
    Try after rebooting your system or in a different user account on MAC.
    Is there any limit with number of login sessions with your SFTP?
    Could you check with Filezila or similar FTP client and connect to your site, see if you get any error there?
    Thanks.

  • Intermittent connection issue

    I am having connection issues again as I did 2 years ago. The connection gets dropped intermittently. Sometimes the modem has a red light on the internet indicator and other times the DSL blinks and won't sync. The tech gave me a new modem, but I still have the same problem. 2 years ago the problem got resolved when they switched me to another line. I keep a spreadsheet on the tranceiver stats. The margin dB varies 20.2/21 (down/up) to 8.8/21 to 18.1/29 for instance. Line attenuation stays pretty much the same between 51.4/29 (down/up) to 49.4/29. Tranmit power varies 9.3/11.9 to 15.7/11.9 to 16.2/11.9 (down/up). I cannot seem to get someone to fix the line issues coming to my home. How can I get this fixed?
    Craig

    No, it is still ongoing. I have a field tech working on it. I was away for some days so couldn't respond. As you know about the intermittant connect problem because of an unconditioned line. Also, I was unable to obtain 1.5Mb/sec connect speed and Verizon only gave me 1.1Mb/sec. This week I am unable to connect at that speed and is now only 0.928Mb. I don't know why this happened, but I can tell you I am unsatified with this connection. I am really unhappy with not being able to get a measly 1.5Mb/sec connection speed when the rest of the world is getting 50Mb/sec or greater speeds.
    As a stock holder of Verizon I am even more disappointed in their neglect with the DSL service. I am working on a letter to investor relations on this matter.
    Craig

  • Connectivity Issues

    iMac 27" 2011
    Recently upgraded to Yosemite
    Increased Memory to 20G
    When connected effectively; Getting 19 Mbps Download; good performance.
    However;  Connection seems to hang consistently a short time after restoring my connection
    Restoration via: (Turn WIFI off, Quit application; Open application, Turn on WIFI - Connection seems restored effectively, albeit for a relatively short period of time)
    WIFI never indicates a drop in connection apart from other items in upper menu bar dropping off (i.e. DropBox) indicating a loss of connectivity.
    Any Ideas on how to more effectively troubleshoot this issue?

    Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
    Step 1
    Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
    Be sure to test on more than one Wi-Fi network, if at all possible. A desktop computer can be tested with a mobile hotspot, such as the hotspot created by a cell phone. If the problem only exists on one network, then the access point of that network should be the focus of your attention, not the computer.
    Step 2
    Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
    Step 3
    If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
    Step 4
    Open the Energy Saver pane in System Preferences and unlock the settings, if necessary. Select the Power Adapter  tab, if there is one. Uncheck the box marked
              Wake for Wi-Fi network access
    if it's checked.
    Step 5
    Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
    Step 6
    In the Wi-Fi settings, select
              Advanced... ▹ TCP/IP ▹ Configure IPv6: Link-local only
    Click OK and then Apply.
    Step 7
    Reset the System Management Controller.
    Step 8
    Reset the PRAM.
    Step 9
    Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first. Turn Wi-Fi off and then back on. You'll be prompted for the password when you reconnect. Save it in the keychain.
    Step 10
    Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

  • Connection Issues Fixed, however still extremely s...

    Hi there, I am a new customer to BT broadband and following our installation of a new line and up to 8Mb broadband on the 23rd of November i had major issues with the service. A few hours after the engineer left my house, problems started to arise.
    Firstly the broadband would cut out consistantly every 5 minutes or so, thus leaving me completely incapable of accessing the internet and completeing work, furthermore after frequent speed tests on the line we were getting slower than dial up speeds. When checking the dial tone on our phone, i noticed that it was a noisy line, and thankfully an engineer visited us this morning and resolved the problem of the noisy line. This in turn has so far resolved the connection issues, and there has been around 3 hours of uninterupted broadband. However my speedtests still show that the broadband is being extremely slow, and this is not what i would expect of an up to 8mb line.
    I would greatly appreciate any input on the matter. For the record i have not been resetting the router, maybe this is a stuck profile issue due to the previously faulty line?
    Here are my ADSL stats and a bt speed test
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 02:28:25
    Downstream:
    7.938 Mbps
    Upstream:
    448 Kbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Interleaved
    Noise margin (Down/Up):
    16.2 dB / 28.0 dB
    Line attenuation (Down/Up):
    6.1 dB / 3.0 dB
    Output power (Down/Up):
    11.9 dBm / 12.2 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    1 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 0
    Error Seconds (Local/Remote):
    1 / 0
    Test1 comprises of Best Effort Test: -provides background information.
    Download  Speed
    52 Kbps
    0 Kbps
    250 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 52 Kbps
     For your connection, the acceptable range of speeds is 50-250 Kbps.
     Additional Information:
     Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 135 Kbps
    Solved!
    Go to Solution.

    Issue has now been resolved. 
    Test1 comprises of Best Effort Test:  -provides background information.
    Download  Speed
    5221 Kbps
    0 Kbps
    7150 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 5221 Kbps
     For your connection, the acceptable range of speeds is 600-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 7150 Kbps

  • Two Macbooks, same spec, yet one has major connectivity issues

    Hi,
    I have two (old - 2006) macbooks, bought at exactly the same time, exactly the same spec, probably off the same factory line. Yet one has serious Airport issues which are proving very difficult.
    It will pick up a maximum of one wireless network, which it barely is able to connect to. There are 3 wireless networks in this house yet it only picks up the nearest one. The other macbook can pick up at least 15 other networks despite being exactly the same spec and on the desk next to it.
    Even when it connects to my network, connections are frequently dropped - over 50% packet loss generally.
    Both are running the same OS and are exactly the same spec. I have tried resetting the PRAM, deleting the airport prefs, resetting the SMC; you name it I've tried it. I noticed that this is quite a common issue with Snow Leopard + Airport, but I am now thinking it could be a faulty Airport card. Could this be the case?

    You already mentioned that you thought that "it could be a faulty AirPort card". I agreed and offered another possibility as well.
    Whether or not you are using Snow Leopard, if you have a faulty wireless card or a faulty antenna connector, you will most certainly have major connectivity issues.
    You've already performed all the standard troubleshooting steps and mentioned that you felt it may be a hardware issue.
    If you have changed your mind and feel that it's a Snow Leopard issue, (logic would dictate that it would have also affected your other identical computer the same way) you have the option of reinstalling the operating system to see if that might help.

  • Please help in db connectivity issue after servers moves to diff location

    Our database is 10.2.0.3 with 2 nodes in RAC. Our database servers are MS 2003 R2. Recently we moved our database to different servers in different location. Say we have location A, B and C.
    A - the location for database users include me.
    B - the old db location
    C - the new db location.
    Location B and C are in the same city but different places. A and B are located in different cities. I was told that there is no direct connection between A and C and the connection between A and C has to go through B. Since the move we have experienced database connectivity issue between A and C. Some users got “ORA-03113: end-of-file on communication channel”. For me I have constantly got “ORA-03135: connection lost contact” from Sqlplus or Toad if I leave my session idle for one hour or longer no matter if it uses dedicated connection or shared connection. We also asked our network admin to make sure there is no firewall in between and we also add KeepAliveTime and KeepAliveInterval to the new db server registry. We also have a TAR with Oracle.
    Thanks a lot for your help in advance.
    Shirley

    It feels like a firewall issue, yes. But this is realistically just a hunch-- your network admins ought to have a lot more tools at their disposal to diagnose the problem. It's quite possible that it's not a firewall but a flaky router or excessive packet loss over a WAN or any number of potential network related hiccups. If I had to place a bet, I'd be wagering on a firewall, but I certainly wouldn't be staking my life on it. I'd definitely be leaning on the network folks to diagnose the issue(s)-- there may well be multiple problems, i.e. a firewall that times out idle connections after an hour and a flaky router that drops connections for some subset of users between A and B.
    Justin

  • TS1398 Ever since I upgraded to iOS 7.0.4 my wifi strength is very weak and I have connection issues all of the time.

    I upgraded my iPad 3 to 7.0.4 and now I have wifi issues I never had before and apple customer support is no help. Does anybody know how to solve this issue?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Loss of connection

    Today i lost connection to the internet, the broadband light was flashing orange. I reset the Modem and the Hub and the Hub broadband light returned to blue. But my desktop pc had a big red cross in the bottom right hand corner over the network icon. I had disconnected the ethernet cables in the back of the hub, but they were all connected properly. When i looked at the back of my pc the end on the connection end did seem a little dodgy. So i recrimped a new end on and that did appear to sort it. But on the desktop i cannot open hardly any web pages they are so slow, i can't do any speed tests as i get timed out out. 
    I have hooked up my laptop using the same ethernet cable and everything is perfect, speeds test are all as they should be.
    It seems the issue lies with my desktop pc, but everything was working perfectly ok before the loss of connection, i have tried severeal browsers and none of them seem to want to respond very well at all.  
    Has anybody got any suggestions or solutions please???

    Hi Damian99,
    Thanks for posting. It sounds like the problem could be with your PC as it’s connecting via the laptop. Has anything changed since the connection dropped? Have you checked the Ethernet socket as opposed to the cable? Let us know how you get on.
    Cheers
    David
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • Why does my iphone loss WIFI connection when I leave the room? When other mobile devices stay connected?

    Why does my IPhone loss WIFI connection when I leave the room? When other mobile devices stay connected?
    I can not send text messages to other IPhones if I do not have wifi or 3G on, the texts are sent as emails.

    Hey Linders1987,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with Wi-Fi on your iPhone 5. The following resource may provide a solution:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    http://support.apple.com/en-us/TS1398
    Wi-Fi disconnects or signal strength is less than expected
    Move closer to the Wi-Fi router (access point).
    Check for sources of potential interference.
    Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including
    - previously connected Wi-Fi networks and passwords
    - recently used Bluetooth accessories
    - VPN and APN settings
    Thanks,
    Matt M.

  • RV320 Intermittent connectivity issues

    We have been having intermittent problems with internet (WAN) connectivity on my wife's small business computer network.  Connectivity will be fine for a day or so, and then we will have a period of poor and frequently interrupted connectivity.  I have our router (a Cisco RV320K9NA) set to send me notifications about problems, and when our internet connection is disrupted, I receive the following notifications from the router:
    Mar 28 07:31:11 2015 routeree1df4 Network Log:  NSD FAIL WAN[1]
    Mar 28 07:32:11 2015 routeree1df4 Network Log:  NSD SUCCESS WAN[1]
    Mar 28 07:36:05 2015 routeree1df4 Network Log:  NSD FAIL WAN[1]
    Mar 28 07:39:08 2015 routeree1df4 Network Log:  NSD SUCCESS WAN[1]
    Mar 28 07:39:48 2015 routeree1df4 Network Log:  NSD FAIL WAN[1]
    Mar 28 07:40:58 2015 routeree1df4 Network Log:  NSD SUCCESS WAN[1]
    The above is a sample, there are many more notifications of this type in the log.
    Our network configuration is as follows:
    Our internet provider's cable modem is connected to our router, which is connected to a Netgear ProSafe 24 port switch.  All of our network devices and computers are connected to the switch.
    We have tried many things to fix this problem.  Our internet provider (Time Warner) has replaced their cable modem. We have replaced our router.  My wife increased the speed of our network connection based on usage data from the internet provider. I have replaced the ethernet cable between the router and the cable modem.
    We have not been able to reproduce the connectivity problem when we directly connect a laptop to the cable modem, so the internet provider has decided that the issue must be internal to our network and/or router, washing their hands of the whole problem.
    I'm technically proficient, but I'm no networking technician, so I'm looking for help and suggestions to fix this problem.  Thanks in advance for any suggestions that you can offer.

    No, it was wireless. Here is the same test run whilst wired in. I don't understand this though. I wasn't complaining about the speed? I was complaining about the general intermittent connectivity issues we experience, and the regular lack of availability the service provides. Perhaps these are standard tests you have to run beforehand?
    The last time I complained about my connectivity issues was in February. If you have access to the ticketing tool, you'll be able to see the nature of my complaint. It was ticket number: VOL051-4263008159178. Something was "done at the exchange" and someone logged onto my HH3 and changed the wireless channel and that "fixed" it. Trouble is, it's been the same ever since. We have a few hours where the connection is stable, then we'll start to get packet losses when trying to connect to sites like Google.co.uk, Bt.com etc etc.
    I'm no expert, but this is clearly more than an issue with the wireless channel and some spurious problem at the exchange. This is a continuing nightmare for us which is preventing us from accessing the internet for hours at a time and therefore taking full advantage of the services we pay a lot of money for!

Maybe you are looking for

  • No Applicable Data Found

    Hello All I am having a strange problem in BI 7.0 when running a query in BEx I receive, as expected, a report filled with data. My problem occurs when I save this query as an Excel worksheet open the file and refresh it, with exactly same filters as

  • No error but still nothing is enter into my Excel file

    this is my connection class and i enter paramters into the logPayment method ...... Im getting NO ERRO message by still no data is entered into my excel worksheet ..... and my parameters all have values in them ..... none are empty Can anyone help me

  • How to draw smooth curve in Hyperdraw??

    Okay, I've checked the manual 4x and have been playing with Hyperdraw for 30 minutes and still can't figure out how to draw a smooth bell curve in the Hypereditor... In Cubase, I would take the pencil tool and draw a nice curve but can't seem to figu

  • Wf_notification use

    I am new to the workflow. I want to use wf_notification.send. For the spec of this api, there is a msg_type parameter. What value I need to pass for this parameter? Please give me an example. Morever, I plan to use this wf_notification.send for the p

  • HANA DB User for ABAP/ Privileges on Users- Attach Debugger

    Hi SAP HANA/ ABAP experts, I was trying to create an ABAP on HANA role for on HANA DB. role TestRoles::developer_role extends catalog role "ABAP_DEV", "ABAP_ADMIN" catalog sql object "_SYS_REPO"."GRANT_SCHEMA_PRIVILEGE_ON_ACTIVATED_CONTENT","_SYS_REP