Loss of features after move

I recently moved from one state to another, and since the move I have two problems with my TV: 1) Closed Captioning is gone, and when I press the CC button on the remote it says "Not Available." 2) The picture size resets to an undesired size every time I turn on the TV; I have been unable to get it to stay on the size I want.

First question is, what is the source of your signal?
-If you have a cable box then it is connected using HDMI: then it will never work.
-If your source of signal is antenna: Check your signal if it is strong or weak. Closed caption may not work if you are encountering any broadcast difficulties.
And regarding your 2nd concern about the pic size.
Just disable (turn off) the auto aspect ratio.

Similar Messages

Sudden loss of link after "getting" file from server

I have used the "get" feature to modify one of my files from my site. While I was saving my changes, I noticed that I had lost all the page's styles -- no style, no background, only html structures! I've tried to repeat the "get" feature to replace the effected page, but instead of replacing the unstyled page, there was no change. The unstyled page remained unstyled. I was able to use the "get" feature to to place the page in question in another folder. My question is, can I just delete the unstyled page and merely upload the very same page that's in a different folder to the server? Any help will be greatly appreciated. I might add that I'm still very much a novice in web design, learning every day.

Allamistakeo wrote:
Hi there,
Since I upgraded to 10.6.5, I sometimes suffer very weird partial losses of connectivity after waking up from sleep. I am wondering if other people have witnessed the same thing.
When this happens (and it doesn't happen every time), HTTP still works, but:
- HTTPS doesn't work anymore,
- Mail is unable to retrieve emails (neither with MobileMe using SSL on port 993, nor with my university IMAP server also with SSL on port 993)
- Adium X (IM client) is unable to connect to any IM server (including MobileMe, GTalk, AIM, Hotmail, and Yahoo!)
Worth mentioning: I am using Privoxy as a local HTTP proxy.
I looked at the logs in the Console, and I haven't seen any suspicious messages. In the Network pane of the System Preferences, everything looks normal.
When I unplug the ethernet cable and immediately plug it back in, everything goes back to normal.
Any ideas?... What do you suggest I should check, next time it happens, to narrow down the source of the problem?
Hello!
Same problem with me but i´m not using the mentioned tool (privoxy) at all. No connection with imap, ichat and some google calendars in ical. Web browsing works without problem. I assume that this happened after upgrading to 10.6.5. One thing to mention: i am using accounts with low privileges, same with you, Allamistakeo?
regards
ulberbast

Automatic creation of meter reading order with RR 01 after move in

Hi Experts,
I am working with DM module of SAP ISU. Currently I am facing a problem that after move-in a periodic order with RR 01 is created automatically by the system.
Ex: Move in date is 01.01.2010. Monthly Portion is used with Schedule record 01.01.2010, 01.02.2010, 01.03.2010, 01.04.2010 and so on.
If current system date is 20.07.2010 then Meter reading order is created automatically by the system for sch MRD 01.08.2010.
Please let me know how to overcome this problem
Thanks in advance.

Thanks for your reply but I have cheked SPRO setting the suggested check box is already uncheked.
I beleive the setting you have suggested is meant for default meter reading during move in but my problem is automatic creation of meter reading order with reason 01 during move in

How to remove a meter from an installation after move-out

Hi,
Could anyone please tell me how to remove a meter from an installation after move-out and if the installation was blocked before move-out.
I was trying to remove the meter from an installation which was blocked before move-out. And if i remove the blocking after move-out, it is still giving me this message that the installation is blocked.
Thanks in advance.
Mahavir

Dear Birendra,
You can NEVER remove a Device (for Billing Related or FULL removal), since you need to save a Removal read while doing the removal. Hence, you can not create a MR ( Reason 01/02/03/06/16/17/21/22), without a Active contract. This is a Basic Metering Rule.
You will have to do the removal on the same day of the Move out.
Any additional questions?
KR,
AAL!

After move tables and index another tablespace, indexes got unusable?

Hi,
I moved table and indexes another tablespace. After move many indexes got unusable state. I couldn't understand thiis?
How can I make them again usable?
regards and thanks?

hi,
check this query below
create table test (id number(10));
create table succeeded.
insert into test values (10);
1 rows inserted
commit;
create index test_indx on test(id);
select index_name, status from user_indexes
where table_name = 'TEST';
INDEX_NAME STATUS
TEST_INDX VALID
alter table test move tablespace users;
select index_name, status from dba_indexes
where table_name = 'TEST';
INDEX_NAME STATUS
TEST_INDX UNUSABLE
rebuliding index
alter index test_indx rebuild
alter index test_indx succeeded.
then check
select index_name, status from user_indexes
where table_name = 'TEST';
INDEX_NAME STATUS
TEST_INDX VALID

Premiere 6.5-how to keep the last image stay after movie's over?

Hi.
I am using Adobe Premiere 6.5.
I like to keep the last image to stay after movie/ animation finished to play, but they disappear and shows the "x" mark.
How can I leave the last image stays after they are done playing? Please help with this?
thanks.

Welcome to the forum. What you are referring to is a Freeze Frame.
Though I like John T's method (one that I use), you might want to look into Frame Hold, if it is in Pr 6.5. It works in a similar fashion, but I like the still for my Freeze Frames. Also, remember that you can adjust the Duration of the still, by click-dragging on the Tail, until it is as long as you need.
Good luck,
Hunt

Unable to delete the iPhone4 old backup data after move to iPhone5 ToT HELP!!

Unable to delate the iPhone4 old backup data after move to iPhone5 ToT
How can I delete the old phone backup file to release iCloud space?

I have done some digging, but no dice. It seems to be a known bug in the system. Some suggested going to an Apple Retail Store about the problem, but no solutions as of yet. Sorry I couldn't be more help.
One board post I saw said taking it to the retail store did get it fixed for him. Maybe you will have the same luck?

Still problems with Apple id and emails after move to iCloud

Hi,
After move from MobileMe to iCloud, there are still problems with apple id's and emails.
I'm trying to delete a mail (email1) from one apple id, but nothing happens?
And when i'm trying to add a email (email2), that i Know isn't linked to another apple id, i get the message that it is already in use with another apple id?
It's a problem when you use these emails with facetime, imessage etc ...

My iPhone 5 and 4 both are having no trouble connecting to the Apple store, but my iPad (4th Gen) cannot either connect to Apple store, nor stream music using iTunes Radio. Keeps asking for my Apple ID and password. When I put it in, it says that I cannot connect. If I put it in wrong, it tells me its wrong. Tried changing my password on my desktop PC. The iPhones handled change and continued to connect, but iPad is unable to connect still.
Any solutions would be appreciated.

Ipad not clearing memory after movie erased

Ipad not clearing memory after movie erased. Any fixes out there?

I did both a soft and hard reset. I just wanted to know if I am going to have to do this every week after my kid loads movies and erases them. It seems this is a major flaw in 7.03 and needs to be rectified.

How to modify the new mask/track feature after you've left the clip?

After you've created an ellipse or polygon mask with the new filter feature, positioned it where you want it in the Program panel, then gone on to other editing, how do you later come back and grab that mask to move it's position?
Clicking on it in the Program panel just grabs the entire image, not just the mask. Highlightingt the mask in the Effect Controls panel doesn't seem to work either.
Any feedback would be appreciated. Thanks in advance for your assistance.

Highlightingt the mask in the Effect Controls panel doesn't seem to work either.
That is the way to select the mask.
Restart computer, restart Premiere while holding down shift+alt until welcome screen.
See if that will help.

Early Termination Fee with No Service Available After Move

I have been a proponent and a loyal customer of Verizon FIOS for 7 years. Our contract was set to expire earlier this year and we were faced with a significant monthly increase. Knowing that we may (or may not) be moving within the next 12 months, I proactively asked two separate sales agents about the Early Termination Fee if we were to sign another contract. We knew the area to which we are moving lacks Verizon FIOS coverage, and because of that BOTH agents said the fee would be waived.
Now 7 months have passed and we are moving. I called Verizon to cancel our service, and the retention specialist so kindly asked for the $170 ETF. She told me that the fee would not be waived, regardless if Verizon could not provide continued service at my new residence. She was also kind enough to apologize that I was misinformed at the time I signed the new contract.
Whether I was misinformed, misled, or the sales agents intentionally misrepresented the terms to secure the contract, I expect a company to have better standards and practices. After my conversation, a simple search revealed numerous examples of Verizon customers in the exact situation as me. As the old adage goes, ‘Where there’s smoke, there’s fire.’ And clearly the practice of misinforming customers is present, abundant, and even possibly accepted.
I doubt that by the time I move that my ETF will be waived, and I will be extorted into paying it in full. My hope is that a potential customer reads this and other forum posts, and becomes a more informed consumer of the Verizon packages and contracts. Before signing a contract, not only do due diligence of reading the forums, ask the sales agents to point out where features are located in the contract. If they can’t or if they won’t put in writing what they say, then walk away.
The only solace I have is that I will be renting my house. When the tenant moves in, I have the opportunity to inform – or perhaps misinform – them of who has superior Internet and Television performance in our area.
Good luck and happy shopping!

Hi FIOSfan07,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Loading photo to slide show after movie has been created

Hi Everyone,
I created a slide show on iMovie and thought I was done so I created a movie through the Media Share feature (to eventually burn on iDVD). Then, I realized there was one photo I hadn't yet included; so I went back and tried to insert that photo but it won't let me. Does iMovie know that you've already "finalized" a project and not let you make any changes to it after that? Is there any way around this without having to do the entire show over again?
Thanks,
Jen

Hey Dazlari,
I'm so sorry but I actually can't remember what I did! I haven't used iMovie for over a year. I'm not that tech savvy though so it couldn't have been that hard to do :-)
Keep experimenting...I hope you figure it out!
Best wishes,
Jen

New Issue with office after move

We just relocated one of our satellite offices to a new location and while we didn't change anything to the internal/VPN network, our public IP changed - but that's it as far as internet connectivity goes.
This site does NOT have an SBS set up, and prior to the move, everyone was working fine.
After the site move, we have ONE user who is on the same network and DID range as everyone else, who is able to receive calls.
The others, regardless of which phone type they use (USB or Polycom / LG) will have a call just drop after 5 seconds. Outbound calls from any user connect and work normally.
Yes, we ARE using Intelepeer. No, we aren't using more than one IP address. The SBS box is in another city that is physically separated from this office, and our core network is located in another state altogether.
At a loss. Not sure what happened. The logs don't show anything out of the ordinary, and our contact that performed the Lync migration (from OCS 2007 R2) even checked it out and scratched his head.
Any thoughts? I'm only on site until tomorrow morning, so I'd like to get it resolved ASAP.

Well, what would we have to reconfigure? The site that moved does NOT have a server located at it - it simply changed physical locations, but the internal routes are all identical. The ONLY thing that changed is the office location necessitated
a different external IP address, but since the network at this site doesn't use anything external, it should have no bearing on that, at least from what I can see.
All of the routes to our SBS, Mediation server, and core server are identical. Nothing has changed from the client's perspective. Also, why would the site that DOES have the SBS server have a problem? Absolutely nothing changed there?
Errors indicate nothing out of the ordinary - our lync engineer ran the tracing and can't determine anything - the calls connect and all looks well, then suddenly the calls just drop. It ONLY happens on inbound calling to the off-site offices. Our
core site works fine. If we use the test user at our main office, he can send and receive calls just fine, but the minute we have him log in physically from one of the two affected offices, he is unable to accept inbound calls.

Quality loss in Imovie after finalizing

Having read alot about codecs and converting i'm still not able to figure out why there's quality loss after finalizing my project in Imovie. In the original .MTS files I can see, when played with the VLC player there's a little noise in the grey and dark area's but it's more then acceptable. After converting and finalizing it's a horror to watch. The weird thing is that the converted .MTS into .MOV files look better when played in Miro then in Quicktime.
What advice can you give me on reducing the noise and making sure the movie looks best when played from a DVD on flatscreen? I want to do the editing in the higest possible quality because in the future I want to burn to BluRay aswell (I know that full HD is only possible when you burn to BluRay)
Here are the details:
1. I imported the material, filmed in 25P (so I don't have to interlace) directly from my canon HF200 into Imovie. I can choose between 960X540 or original size.
2. I choose original size and receive a warning that this can cause a negative effect on the quality. So maybe the problem is caused by my old and small laptop, see specifications underneath my questions.
3. The converted mov. files in Imovie appear to have more noise then the original and after finalizing to HD 1080p the noise in the grey and black areas is almost unwatchable.
Is there anything I can do besides buy a new laptop?
Thank you for your help!
Specs Mac
Modelnaam:          MacBook
Modelaanduiding:          MacBook4,1
Processornaam:          Intel Core 2 Duo
Processorsnelheid:          2,1 GHz
Aantal processors:          1
Totaal aantal cores:          2
L2-cache:          3 MB
Geheugen:          4 GB
Bussnelheid:          800 MHz
Opstart-ROM-versie:          MB41.00C1.B00
SMC-versie (systeem):          1.31f1
Intel GMA X3100:
Chipsetmodel:          GMA X3100
Type:          GPU
Bus:          Ingebouwd
VRAM (totaal):          144 MB
Fabrikant:          Intel (0x8086)
Apparaatcode:          0x2a02
Revisiecode:          0x0003
Beeldschermen:
Kleuren-LCD:
Resolutie:          1280 x 800
Pixeldiepte:          32-bits kleur (ARGB8888)
Hoofdbeeldscherm:          Ja
Synchrone weergave:          Uit
Online:          Ja
Ingebouwd:          Ja

No worries Still your remark about the external drive is someting to take in to account, i have mine hooked on most of the time.

New 1.1.3 feature to move home-screen icons to second page stops working

The cool new iPhone 1.1.3 update feature whereby you touch a home-screen icon for a second or so, and can then customize it's location, by moving it around, including moving to a second home page screen stopped working.
I can still customize the position of icons within a particular home screen, but I can no longer move them from home screen to home screen.
There is a work around, I can shuffle the icon down on to the main icon bar at the bottom, then shift to the second screen, then move the icon onto the second screen from the icon bar at the bottom.
The problem was triggered after I had populated some icons onto a second home screen page, then subsequently removed all icons from the second page - after the number of icons on the second page had hit zero, I couldn't then move more icons back onto it.
Seems like a minor bug - that can be worked around, by shuffling icons down to the button of the screen via the icon bar, but something that should be fixed.
I have not yet tried a cold-reboot, or a system restore on iTunes.

FYI - reboot didn't fix it - I'll do a system restore over the weekend - no doubt that will reset its state sufficiently and the problem will go away. Will be interesting to see if it returns.

Loss of features after move

Similar Messages

Maybe you are looking for