Loss of G and G after software update

Has anyone had problems with G or 4 g dropping since the software update? I have tried everything and the only time I get it is right after I restart my phone, or turn off the mobile data then turn it back on. IM getting extremely frustrated!!!

I had a similar problem with my phone. It kept getting weak signals and would go from 4G to 3G repeatedly. Here is what I did. Power down the phone completely. Once off press the power button and the volume down button and hold it for approx. 5 seconds. It will go into hboot and start checking a file named PG05IMG.zip. Once it completes and verifies the file it will ask you if you want to update the file. Press the up key for the volume and it will update the file. Do not power off the phone while it is updating the file, just let it do it's thing. This is your radio. Leave the phone locked for a few minutes and check your signal. Once you get restarted and get 4G back unlock the phone and check it. It worked for me.

Similar Messages

  • Ipod touch4g  is not detected in pc and itunes after software update

    after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Nokia 6682 SMS and dialing after software update

    Im getting pretty frustrated with this whole software update thing already. I just got a nokia 6682 phone and have been amazed at how well everything works under 10.4.7 dialing from address book and sms works great. Then i got ahead and did a software update last night... security update and others and now i lost that functionality. can i undo the update... like roll it back? Im staritng to think im never going to update again unless something is broken.

    nevermind ... re did all the pairing and it works.. thanks anyways if you read.

  • Ipad3 will not let me accept terms and conditions after software update

    I downloaded the new software and had forgotten my password so had to ask for it.Now when I turn on my ipad it goes to the terms and conditions page but will not let me accept them and has a screen behind that  that says create a password but I cannot get to that without accepting terms and conditions!!!! My Ipad is a brick! Help please!

    It had not turned off all the way....now that it has been off ALL the way and turned back on after a minute it let me pass.

  • After updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

    after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

    Download 9.1 and 9.2.3 updates and install them

  • IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

    iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
    I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
    EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
    I don't have Apple Care, what to do? Spend more money and buy a new phone?

    Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
    I myself, two days ago purchased a  2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
    I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
    Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
    Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
    SHAME ON YOU!

  • Finder freezing after software updates and uninstalling

    Help!!!
    I updated iTunes,Safri and an secriuty enhancement as the automatic reminder, it hang up at disk optimizing(77% competed) after installation, I had to forcely shut down, then I uninstalled several unnecessary softwares.
    Then the finder froze, I failed to open any software, the coloured cursor keeps rolling and rolling.
    But the folder operation is functioning.
    What should I do?
    Help!!
    Junxing

    I don't have an answer to fix your problem unless you have your hard drive backed up onto another hard drive, but the answer would of course be obvious if this were the case.
    I would like to point out that everybody that has a computer, laptop or desktop, should have their entire hard drive backed up onto another hard drive. It should be considered as a requirement, not a luxury.
    Next, before ever installing a software update, you should run the "Repair Disk" function and also the Repair Permissions function of the Disk Utility app, from the install DVD. If there is corruption in your disk directory and you go ahead and install a software update, all manner of problems may arise.
    I never let the software update Install automatically. I always download the update software, then do the preventive disk repair, permissions repair, then do a fresh backup of my entire hard drive, then run the update software's installer. Now if anything goes amiss, I am not out a thing, and I am in a good position to troubleshoot. So far I have never had any problems with any updates but this method will pretty much make sure that if you do ever have a problem you are not in any trouble. Just restore from your current, fresh backup.

  • After software update apple rv light flashing and not coming on

    After software update my apple tv did not come on and light is flashing I tried in pluging and all what next for me

    It was probably applying the update and rebooting, unless it had doin it for awhile?. You will need to grab a micro usb cable and restore in iTunes
    http://support.apple.com/kb/HT4367

  • After software update (Sept. '09) apps don't work and some missing

    Plugged my phone in and itunes said there was an update I needed to install. Did that then it said there was a problem with the phone and it needed to be formatted before itunes could read it, did that too. Then while it was syncing up again after formatting it kept telling me there was a problem and items could not be found. All downloaded apps, some are missing completely from the phone, are no longer working. HELP!

    expresso3 wrote:
    yes i am fully aware of that!!!
    This "i do not see an update when i connect to itunes!!!!" suggested otherwise.
    the post says "after software update (sept. '09) apps don't work and some missing"
    there has been no update in sept 09!!!!
    Perhaps the OP doesn't connect the iPhone to the computer very often.
    Phil

  • My phone is still disabled after software update and i cannot seem to reset my passcode someone help me

    my phone is still disabled after software update and i cannot seem to reset my passcode someone please help

    Does the Ipod see the network?
    It sure sound like the drop cause some other internal damage like breaking/loosening the connection to the  antenna. See:
    http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/3

  • New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

    Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • Internal camera failure after software updates...first skype couldn't......

    Hello!
    I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
    Please help!
    Thanks
    O

    First, reset the SMC:
    http://support.apple.com/kb/HT3964
    If that doesn't help, then take it to an Apple Store for examination.

  • Problem in curve 9320 after software update

    Hi, i had updated my curve 9320 with new software as recommended by blackberry desktop software. After the update i am facing many issues after software update:
    1. whenever I am trying to make a call or opening any message my phone power suddenly goes OFF and not starting till I pullback the battery and re-inserted.
    2. Some time automatically its battery got heated up and there is discharge of battery, but when i pull back and re-inserted battery it becomes normal.
    3. Email setup is not working, I am not able to add any email account. whenever I am clicking on email setup there is no reaction.
    please suggest what to do. I tried to go back to download old software but I am not able to get it anywhere online.
    regards
    iftekhar

    Hey iftekhar,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest backing up doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My computer couldn't find my playbook anymore after software update!!!

    After software updated to 1.0.7.3312, my computer couldn't find my playbook anymore.
    First couple time it could find normally as like before, few times later it could not anymore!!! LOL.
    I tried connect to the other PC either in my office and home several times, exactly same happen again.
    Anybody got same problem that I have? Please advice me.
    My computers have Window7, 32bit.

    Please review the knowledge base articles here:
    Article ID: KB27424 Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Arabic language disappeared after software updater...

    Yesterday night I decided to update my mobile software using nokia software updater to solve a performance issue as mentioned in the website.
    I took a full back on my MMC then started the update.
    My mobile software version was 1.00.XXXXX and the new release is 4.XXXXXX
    The update completed successfully, but after I restarted the mobile I was shoked of the following issues :
    - The arabic language disappeared from the phone lagnauge selection.
    - MMC requested a passrowd to ulock it !!! while I dont remember that I set a password for it or I may set it once long time back but I forgot it now.
    I'm surprized for what happened as I had a discussion last night with my father regarding Nokia trust relation ship .
    Please advice how can I solve my issues ASAP.
    All my contacts are backed up on the memmory .

    read this :
    /t5/Software-Updates/Language-changed-or-missing-after-software-update-sticky/td-p/265903
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Maybe you are looking for

  • Satellite L300- 1AQ - Bluetooth tray application has stopped working

    When i put my laptop on it comes up with an error which says: *bluetooth tray application has stopped working* A problem caused the problem to stop working correctly. Windows will close the program and notify you if a solution is available. Anyone go

  • Multiple Internet Connection Issues

    Hi there, long time reader first time poster. I figured I should post this as, while having read through hundreds of similar posts I still can't figure out how to solve my connectivity issues. I just bought a new iMac 21.5 inch 3.2Ghz i3 model and wh

  • Mac Pro -- Installing XP and Win 7 on a SEPARATE Internal Drive

    I would like to install Windows XP SP2 and Windows 7 onto the second Internal Drive in my Mac Pro. I am planning to install Win XP on the first partition and Win 7 onto the second Partition of Drive 2. Will this work? Drive 1 - GUID partition Scheme

  • MacBook Pro

    mac book pro will not boot up just apple logo and spinner

  • Connecting remotely to Time Capsule

    I want to be able to connect to the time capsule over the internet from any location without my mac being switched on at home, will this be possible so i can access files on the drive. Thanks Steve