Loss of installed brushes when restarting my computer?
I'm working with photoshop CS3 extended and every time I restart my computer or my computer restarts because of a windows vista update , I come back to my photoshop to see that every brush I've made and installed are not there anymore. so I have to take the time out of my day to reinstall them , and the ones I've made I have to remake if at all possible. if anyone could help me I would greatly appreciate it, thank you in advance
Have you tried this?
http://livedocs.adobe.com/en_US/Photoshop/10.0/help.html?content=WS0097B3F6-D609-4c17-B759 -FF0F5FCBAD08.html
Similar Messages
-
I just purchased a MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drivesMac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD -
FlashPlayer out-of-date message even though I just re-installed it and restarted my computer
I am using Safari on Mac Book Pro I go to site: http://www.speedtest.net/. At first it showed the "Flashplayer out-of-date" message two sites on the page . I stopped and went through the FP install and restarted my computer. Now it only shows at one site on the page no matter how many times I install the new version. Any thoughts?
Try un-installing and then re-installing.
Adobe Flash Uninstaller -
Retina MacBook Pro fan very loud and usb mouse disconnecting when restarting the computer
2 days ago, I got a brand new retina MacBook Pro 13 inch with the specs 2.8 GhZ i7, 8 gigs of ram and 512gb ssd. It should definitely be functioning properly since it's a really expensive computer, but I already noticed a few problems that I hope you can help me with.
So first of all, when I play World of Warcraft, the fan seems to go up to 6000rpm and is very loud. I checked the activity monitor and it says WoW is using about 60% CPU, so it shouldn't have to be that loud. I also installed smcfancontrol, but it doesn't seem to lower the speed of the fan.
I ran an apple diagnostics test and it couldn't find any problems, and I also tried resetting my smc, but the fan is still going very loud.
And the second problem I have is, that when I have my mouse usb connected to my Mac, and I restart it, it can't detect the mouse anymore. So I'd have to pull out the usb plug and put it back in everytime I turn on my computer. isn't it supposed to automatically connect to my mouse when it's already plugged in?Matt,
Try reading this, then go to the section on Resetting the SMC for a Macbook Pro with a battery you should not remove.
http://support.apple.com/kb/HT3964 -
Internet connection lost when restarting the computer
Hello everyone.
I live in Denmark, and 6 days ago I bought a new TOSHIBA pc: a Sattelite L855D-100. From the very start there has been a problem with the wireless internet connection. When I restart the pc, the internet connection is gone afterwards, and I am not able to re-establish the connection in any possible way. I have to shut down the pc - wait a few seconds - and then start the pc in 'normal' way. Then the wireless internet connection is okay.
But the problem is the same every time I restart the pc.
Does anyone know how to solve this problem?
I thank You in advance for Your help and advice.
Best regards Svend in Copenhagen.Satellite L855D-100 (PSKAYE-003004DU) <- Netherlands version
A brand new computer should work right off the shelf, Svend.
I would restore the hard disk to its original out-of-the-box contents using Toshiba recovery media just once. And then return it for a new one if things are still not working right.
See the section System Recovery, which begins on p. 4-16 of the User's Manual (attached).
-Jerry
Attachments:
L855UsersManual.pdf 5612 KB -
Please help me
Had the same problem, with my iPhone, so I tried syncing my iPod Nano, and got a message saying -
'An iPod has been detected, but it could not be identified properly. Please disconnect and reconnect the iPod, then try again.
If the problem persists, uninstall iTunes, then install iTunes again'
Just finished re-installing iTunes, hasn't helped at all. -
I have been losing my projects when restarting the computer
Recently I have lost two projects when I re start my iMac. Prior to that happening I have had some of the photos that I am using in the project time line not show (all I see is black) when I scroll over the photos. Can any one help? Thanks
I can't be certain without looking through your event browser, but it's possible you have been editing inside a clip as if it were a project. This is a not uncommon mistake of new users.
The upper left of the timeline panel should have an icon like this
If it looks something like this you're editing inside an item in the event browser -
Tried to open my old MacBook. Couldn't remember password. Followed suggestion to reinstall hardware. Now startup disk is stuck in computer and it won't turn on. I keep getting a message saying I need to restart the computer. When I hold down power button, I get the same message over and over. Any ideas?
Hello m.goo, and a warm welcome to the forums!
To eject the Disc, hold the Mouse button down, (or what passes for it on a Laptop), while powering up, if you also hold the Option key down at the same time it should eject & give you a chance to insert your install disc & wait for it to shw as a Boot option.
"Try Disk Utility
1. Insert the Tiger Mac OS X Install disc , then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
If it appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, APPs, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Be sure to use Preserve Users & Settings.
To check if AppleCare applies, AppleCare Products Overview...
http://www.apple.com/support/applecare/overview/ -
I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?
I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
..Step by Step to fix your Mac
Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
Most commonly used backup methods
If you do need to do a wipe and install
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks -
I was wondering, does anyone have an idea on how to update my Macbook Pro 15" to Mountain Lion's 10.8.3 from Mountain Lion's 10.8.2 version? When I attempt to use the App Store, it will restart my computer but it will not install the update. The update also still shows up in the App Store as available and when going to "About my Mac," it still shows the current version being 10.8.2.
Computer:
Macbook Pro 15" Aluminum Body
Purchased Late 2008
Current OS: Mountain Lion 10.8.2
Original OS: LeopardI will be attempting this fix this fix tonight:
https://discussions.apple.com/message/21529499#21529499 -
When I connect my iphone and open itunes the iphone icon shows up but when I click it nothing happens and the icon disappears. I have uninstalled and re-installed itunes. Turned my computer off, and turned my iphone off. Restarted everything. Synced my iphone and my itunes and nothing seems to work. Any suggestions? I am using Windows
Stop clicking the eject button.
-
i have downloaded the updates for my macbook air and when i restart the computer it says that they can not be installed because and error occured i have tried 3 times
A common hangup for updates is corrupted file permissions.
Using Disk Utility, perform a Repair Disk Permissions on your main drive, then re-attempt the update. -
I am unable to open Safari. It was working yesterday before I installed the update. The update seemed to be automatic when I restarted my computer. I am running 10.9.5. I don't want to lose my contacts, bookmarks etc if I have to delete the app. Any suggestions?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to launch Safari. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Firefox kept trying to update v. 3.5.?.?, usually failing. So, I went to the website, then downloaded and installed v. 4. But, when I restart my computer, it reverts back to the old version, loses bookmarks added while using v. 4, and again tries to update v. 3.5. When I look in the folder which contains Firefox, "properties" says I have v. 4, even though what is appearing is not.
See:
* http://kb.mozillazine.org/Preferences_not_saved -
I keep getting the following message when I try to install firefox.."your computer must be restarted to complete a previous install of firefox" I've restarted numerous times..keep getting the same message
Have a look at the solution to a similar problem: https://support.mozilla.org/en-US/questions/921375?s=%22Your+computer+must+be+restarted+to+complete+a+previous+upgrade+of+Firefox.+Do+you+want+to+reboot+now%3F%22&r=0&e=sph&as=s
If that doesn't work, you can uninstall FF and do a clean install. You'll prob lose your bookmarks, history, etc, though, so if you do this set up Sync first! https://support.mozilla.org/en-US/kb/what-firefox-sync-and-how-do-i-use-it
Maybe you are looking for
-
Is there a faster way to sync?
Hello. I had some issues with my Apple TV and MAcBook syncing yesterday and I had to pair my computer again, and the content of Apple TV was erased. So now I have to sync everything again but its taking hours (I think even days). My internet connecti
-
HRMD_A replicating Hr master data
Scenario - HR master data through idocs. successfully sent from H system to XI but idoc with error in SRM system(HR->XI->SRM) idocs have error status - 51 ale : inbound processing for hr master data. Some idocs have error message 'infotype 003 will b
-
How to load jsp page in Frame?
hi I have tried to make an Application which is a very simple Messenger made by java.awt.Frame and had problem to load/open jsp page. Is there any way to load/open jsp page in Frame When an event occured? It makes me crasy these days. Please Help me.
-
I have tried to sign in to skype and it is not letting me ( i have tried everything ) I have unistalled and reinstalled it ( restarted pc ). Any sugestions ( i use Nornton )?
-
I have a dimension time and a table in which there are some rows with the same date: i.e. DATA OP DESCRIPTION 09-02-2002 64.54 xxxx 09-02-2002 24.63 yyy But on my workbook I can't see these rows. I see empty fiels. The sqlinspector giv