Loss of Music Sound Samples After Recording
After recently recording a track, the sound track information - wave forms - on the track went to a straight line when I stopped recording. The recording was still on the track, but all I could see was a straight line where the wave forms were previously. I went to the Sampler, & clicked on "Normalize" - which fixed the issue on that track. But that did not work on every track. Have I inadverently changed something in the recording dialogue box? - I've checked all the settings, and nothing seems different. How do I change this problem so I don't have to go to the sampler and Normalize every track after I've recorded it?
I've watched quite a few Mac Pro Video's on Logic Pro, but I haven't found a section that explains the "piano roll." Anyone have a link where I can read up on it or explain it?
Thanks
Bob
Everything seems fine, the only setting you may change (although it may not change this issue at all) is the number of Processing Threads. Instead of automatic, set it to the highest available number.
Also not related, but important: don't clip your inputs, meaning the loudest peak should not exceed -6 dBfs.
This overview issue has been reported before, most of the time it is the rec delay set to anything other than 0 (which is not the case with you) and sometimes the issue clears up, never to return, with a simple Mac reboot. And if all else fails, you can always use the Options > Audio > Refresh Overview(s) command afterwards.
Similar Messages
-
[TV@Plus] record sound garbeled after recording
Just installed for first time
Recording seems to be ok, after play back of the mp3 file in windows, the sound is badly garbled
TV @nywhere plus driver 2.4.0.4The ordinary cabel goes into the set top box in one room this then has what ever it needs for us to see tv on the TV
but we can still get some channels without the box.
The computer is connected to another cable lead in the house so although we cna't gett he channels which are on the set top box we would get the rest still.
I have the jack connected now to the line in this is how I got the radio after I read through the questions here.
Thanks -
IOS 8.0.2 - loss of music playing functionality after updating
My daughter updated her Iphone 5C with the new 8.0.2 update via iTunes as she was short of memory on her phone and did not want to lose her music and photos. Following the update she has lost a lot of photos and only some of the music has synchronised and most of this will not play but just keeps skipping to the next song. She now has a very reduced playlist & is very unhappy!
Hey alangjed,
Thanks for the question. Let’s begin by first power cycling your device:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If the issue persists, it sounds like the Accessibility option “Greyscale” may have been accidecanlly enabled. You can configure this option in Settings > General > Accessibility:
Invert Colors and Grayscale - iPhone
http://help.apple.com/iphone/8/#/iph3e2e1fb0
Thanks,
Matt M. -
I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, then cut the recording into songs using one audio file folder ad multiple song files. When working on an individual song, I can't access the sampler. I get the message "nothing to display" or "no region or audio file selected" After much research on the web, I believe this is a permanent bug. Does anyone have a good work-around for this type of work. We record live 16T band rehearsals constantly and would love to be able to break individual songs out of the large file and be able to use the sampler. Thanks in advance for your ideas! Cheers.
Another thing - if I copy one of the tracks to another track, then the sample editor works on the copied track. I don't want to have to copy 16 tracks to new tracks to be able to use the sample editor on a project. Thanks again.
-
Loss of key clicks and music via speakers after ios5 upgrade
Have lost key clicks and music via speakers after updating to ios5. Sounds are there when headphones are plugged in. Have checked all settings and done hard and soft resets. What to do?
I've been tracking some issues on the Conexant drivers. Can you send me a DxDiag.txt and your c:\windows\inf\setupapi.dev.log file to "mediaq at Microsoft dot com"?
Thanks!
John W [MSFT] -
No sound after recording but i see the notes on Logic
No sound after recording with my Keyboard. My keyboard make the sound when i record it but after there is no playback i see the notes on Logic but nothing. And if i try to copy or cut and paste the part i record from the keyboard it work after..i really don't understand!
Does it say Midi Ch 1 in the event list for the Midi region you recorded?
This is most likely to be User error... but to identify what exactly.... and to rule out any corrupted settings in LPX..
Try trashing Logic's preferences and CS prefs as per this support note.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
if that doesn't fix things then...
Which Software instrument (SI) are you trying to play?
You do have a SI loaded in yes?
You are using an Instrument Track yes?
You are not usimg an external Instrument track are you?
If you drag an Audio loop from the loop browser to an Audio track.. can you hear sound on playback?
Please post a screenshot of your arrange window showing the channel strip for the track you recorded midi to... That will help us see how you have set things up. -
No sound after recording on HP pavilion g series laptop
I don't get any sound out of my laptop after recording sound.
HP Pavilion g series
Windows 7Yes we can get you a Manual and maybe even a video showing how to do it. Let us know the exact model number...g what...g6; g62???
We also need to know what country you live in to point you to the part. The heatsink/cooling fan will be under $30.
How to Find Product No -
I have recorded a vocal track, but have no playback sound. The meter shows it's there, but no sound even after un-muting the track. I'm using Garage Band 10.0.2/Mac Mini ~Thanks
Check the output settings in GarageBand's preferences > Audio/Midi pane.
And in the System Preferences > Sound panel.
Also check the settings in Audio Midi Setup Utility. -
IPhone 4S updated iOS 6 after music sound disabled
Hi all,
I am getting problem after updating ios6 music sounds
Are disabled could any one plz help me for thiswhen phone is connected to itunes for restoring, it's started restoring but after few minutes it's cancelled restoring again n again, at least more than 10 to 13 time i sync the device then it's complete all backup done in device, but problem remain same. All App's close automatically. what should i do now.
-
Record sound sample from flash dynamic page
Hello , I have a basic problem. I visited Emerson Lake and
Palmers drummer Carl Palmers web page. It is www.carlpalmer.com
When you enter the site , there appears a drumset picture. When you
move your cursor without clicking on the drumset , it plays the
drums. Google group members say it is a flash site . I want to
record the sound samples at the same quality. How can I do it ? I
tried some win audio recorder like programs but I could not
succeed.
Best ,
Mustafa Umut SaracEver think that this may violate copyright law?
If you have a legitimate use, you might try contacting the
webmaster of the site and ask for the originals. -
No sound after recording in camera
After recording on my ipad no sounds from the record
Is your microphone working in other apps? Voice memos?
-
After rebooting from Idle State, music sounds like vibrating not normal
After shutting off my computer into the idle state and restarting it (so all the programs that have been open before are in the same state again), iTunes does not play music normal anymore.
The music sounds as if it is cut into many pieces, a long tone would be cut into many very short tones and it sounds like vibrating.
It does not help to exit iTunes (really exit it in the system tray), only reboot helps.
Any suggestions?
Thanks
Svkoch
Acer Travelmatr 290 Windows XP ProKwondoo,
I am sorry. If you need direct assistance from Creative, please go here. Customer support does not monitor these boards. -
I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks
Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz -
When I film something the sound isn't recorded... why?
When I try to film something, the sound isn't recorded only the images. Does anybody know what is the problem? In the begginning it used to record everything but after I don't know what happened and when I play the movie in the top of the screen appears like a line showing the fragments of the whole movie and a bar goes passing over the images like a timeline....
The same thing happens to me. But in my case my 12yr old son noticed that I cover the phone's speakers with my hands while filming, not that thats your case. I just thought to tell you cause its funny is all. Hope some one can assist you. Good luck.
-
What software do I need to get music from a vinyl record into ITunes
What software do I need to get music from a vinyl record into ITunes
When I used Audacity to digitize some of my LPs I would record the whole album, then trim the lead in, select and export the first track, delete that, then export the next track, and so on. You can zoom in and out to locate the track breaks. There is a snap to zero point option which should prevent clicks on track transitions. If you want to go deeper you can add fade in and out so you don't snap into the sound of the groove. (I was using a pretty ropey turntable). There are other tools that chop up audio but you should be able to do it all in Audacity reasonably quickly once you get your eye in. I'm sure there are tools that can chop audio at pre-specified points, or even calculate where those points should be, but they are unlikely to be free and probably still need a degree of supervision.
tt2
Maybe you are looking for
-
After several hours of iMovie preparing my move I got the above msg. Any ideas? Thanks.
-
I have recently signed up to adobe creative cloud and am very pleased with the products. It took a while to download the apps (adobe photoshop, premiere, indesign, illustrator and adobe bridge. If I re-install my Operating system (windows 8) on my PC
-
Turning Bash into GLaDOS and other fun tricks
I wanted to share some simple bash customizations that can improve functionality and awesomeness. All changes can be undone by deleting the added text or commenting out a line. This was made in Ubuntu, your mileage may vary. These edits can be safely
-
Error 500 trying to render annotation texts and polygons
Hello I'm new at Oracle Spatial. Im trying to render a map with Mapviewer with a XML request and I get this error on OC4J. I'm using Oracle Fusion Middleware MapViewer 11g R1 (11.1.1) and Oracle Spatial 11g. *500 Internal Server Error Servlet error:
-
Script to delete expired or errored scheduled workbooks for Discoverer
Hi All, Can any one pont me to find a script to delete all expired and Errored workbooks in Database for discoverer? Appreciate all your assistance. Thankks -S