Loss of Network after iLife Support 9.0.4 Sofware Update

I just updated my System Software with the 9.0.4 iLife Support and 3.0 Digital Camera Raw Compatability Update. Now I have lost access to my wireless network as it will not recognize my password (returning invalid password). I ran disk repair for permissions but to no success. In addition I have found the following other issues:
1. My Keychain is saying that access to any of my saved passwords is restricted.
2. I have two Firewall requests coming from cups-lpd and krb5kdc every time I log in.
3. Date has been reset to 1 January 2001.

I just dragged all of the 1 January 2001 Prefs out of my folder and restarted and it looks like its working, including the keychain. I'll keep monitoring this...

Similar Messages

Logic slow after iLife Support 8.2 update

The main discussion is here entitled Logic 8 WAY slow after 10.5.2 update, but it seems the problem may be caused by the iLife Support 8.2 update.
http://discussions.apple.com/message.jspa?messageID=6579051

Wow. Thank you very much Ruark. I will NOT install those two updates on my computer for now.
Ruark wrote:
As for other systems, this is a quote from RMB2005 at the Logic 8 WAY slow after 10.5.2 update discussion here: http://discussions.apple.com/message.jspa?messageID=6583515
This has suddenly become a huge problem for me. Interestingly, I'm still on Tiger 10.4.11, but ever since my last two updates (iLife Support 8.2 and Security Update 2008-001 1.0) it is taking forever to open anything in Logic 8.0.1, including the simplest of templates.
Once a project is open, it seems that any task will invoke the dreaded coloured beachball for about five minutes at a time. Activity monitor shows 'Logic not responding' during these annoying intermissions.

GarageBand slow after iLife Support 8.2 update

The main discussion is here entitled Logic 8 WAY slow after 10.5.2 update, but it seems the problem may be caused by the iLife Support 8.2 update.
http://discussions.apple.com/message.jspa?messageID=6579051

Folks, I have had some success in fixing this problem.
I followed the following instructions that I found in an old post on another forum, dated in 2007 but gave it a try. Since doing it, Garageband is loading in the usual 20-30 secs again.
1. Create a folder on your desktop called "OLD FONTS"
2. go to the /Users/*/Library/Fonts folder, where "*" is the user that is having the problem loading GB.
3. Move all of the fonts from this folder to the new folder you created in the first step. These are not system fonts, so it is okay to do this.
4. Try to load GB. Thank God and do a happy dance!
5. Put back fonts one letter of the alphabet at a time to find the offending font.
I haven't found the offending Font yet, but wanted to share this info as soon as possible.

Problems with networking after sleep since March 1st EPI firmware update

Hi,
After the new EPI firmware upgrade of my macbook pro (4 months old) a problem that I had 3 months ago re-appeared again :
when I received my laptop (Lion, fully updated) a few months ago it had problems getting internet access after waking from sleep : it could detect the wifi-network, it was connected and when I tried to ping -for example- google.com in terminal it would answer. This means my network was working and DNS was working too...
Only when opening safari, or software update or any other program that wants to go online, it would give me a 'no internet connection' message. After 3 minutes or so, it would work again (wihtout doing anything). I tried renewing the DHCP lease, moving the order of interfaces, re-adding the networks after deleting but nothing helped.
The problem back then was solved after a firmware upgrade, and it would be online 2 sec after waking from sleep.
After this week's firmware upgrade the problem came back......
Anyone have any suggestions, or anybody know if Apple is working on it again?
Thanks,
Koen

For me the problem is solved now.....last night software upgrade popped up with "another" EFI-firmware upgrade, and after this it worked again....too bad I didn't look at version number. But I'm happy I wasn't the only one with this problem....
For the questions above : this was abviously firmware related since it happened directly after the first update. If something has worked and nothing changed in the peripherals the problem is in hte thing that DID change...the firmware. I was surfing after solutions and I did see that there is a problem for some people with the way the OS passes on the DNS (so when pinging, the DNS is picked up directly or something, but in applications such as safari.... it grabs the settings from the OS somewhere). There was a terminal-based solution to reset this setting but by the time I wanted to try it the frimware upgrade popped up....but maybe it can help others...

Dead dv6-7214 with MSATA C DRIVE after hp support assistant loaded new bios update. 5-18-13

I postponed a bios update because that makes me nervous. Apparently for good reason.
Today I let the nag proceed with bios update on my dv6-7214 running win8.
It said it was doing a system restore point, but that seems to have been useless.
The notebook had a black screen after an hour of "rebooting", so I powered down.
Power on still black screen.
No response to any keys prerssed after power on, such as esc key.
I read several posts regarding needing to roll back bios updates, which doesn't say much for HP
that this is a recurring problem.
I am NOT getting a blue screen, not getting anything at all.
Is there a way to roll back a bios short of shipping it back to HP?
I did not write down the bios version, just trusted it was needed. Wont be letting hp support assistant to run anything else.
I guess i will uninstall HP support assistant, if i ever get my computer back to the point it can turn on.
Cant think of any software bug as bad as the one loaded by hp into my bios.
Anyone? How do a reset the bios with a totally unresponsive notebook?
This question was solved.
View Solution.

Thanks chryig, but no that did not work.
Hp support emailed the same solution.
The dv6-7214 has an msata slot, which can be configured as C drive, which I did with an msata ssd.
The drive which came with the laptop was in the sata slot, as usual, but was not C drive.
I found someone posting identical problem, black screen, (not blue screen) no error messages, just bricked.
They also has an SSD C drive.
I tried temporarily moving the msata to the sata slot (with an adapter). This allowed the bios to complete
its update.
So it isnt the Bios that is broken, but the Software to perform bios update is broken.
Update (bios) fails if the C drive is anywhere but the sata slot (or perhaps the c drive must be drive 0).
Hopefully HP will fix this problem. Many HP laptops are sold "upgraded" with additional disk via
value added reseller. Since there are only 2 sata slots and 1 msata slot the C drive can be in, it
should be possible for the update bios software to handle this small number of possibilities.

After installing iLife Support 9.0.4 - network login becomes locked

I'm experiencing a strange issue after installing iLife Support 9.0.4
I am on a corporate network using Active Directory. I use Connect to Server every day to access all my files for work.
Here is my scenario:
1. Startup OR Restart my MacBook
2. Login to my user account
3. Finder -> Connect to Server (i.e. smb://server/location/etc/)
4. My network credentials are saved in my keychain, so it tries to connect
5. My network account becomes locked.
After #5 I have to call our Help Desk to unlock my network account.
Once my account is unlocked, everything works fine - I can use Connect to Server, Entourage email, etc.
Unfortunately I am unable to use Time Machine due to our company policies
Any insight would be appreciated.

I just dragged all of the 1 January 2001 Prefs out of my folder and restarted and it looks like its working, including the keychain. I'll keep monitoring this...

Sudden loss of link after "getting" file from server

I have used the "get" feature to modify one of my files from my site. While I was saving my changes, I noticed that I had lost all the page's styles -- no style, no background, only html structures! I've tried to repeat the "get" feature to replace the effected page, but instead of replacing the unstyled page, there was no change. The unstyled page remained unstyled. I was able to use the "get" feature to to place the page in question in another folder. My question is, can I just delete the unstyled page and merely upload the very same page that's in a different folder to the server? Any help will be greatly appreciated. I might add that I'm still very much a novice in web design, learning every day.

Allamistakeo wrote:
Hi there,
Since I upgraded to 10.6.5, I sometimes suffer very weird partial losses of connectivity after waking up from sleep. I am wondering if other people have witnessed the same thing.
When this happens (and it doesn't happen every time), HTTP still works, but:
- HTTPS doesn't work anymore,
- Mail is unable to retrieve emails (neither with MobileMe using SSL on port 993, nor with my university IMAP server also with SSL on port 993)
- Adium X (IM client) is unable to connect to any IM server (including MobileMe, GTalk, AIM, Hotmail, and Yahoo!)
Worth mentioning: I am using Privoxy as a local HTTP proxy.
I looked at the logs in the Console, and I haven't seen any suspicious messages. In the Network pane of the System Preferences, everything looks normal.
When I unplug the ethernet cable and immediately plug it back in, everything goes back to normal.
Any ideas?... What do you suggest I should check, next time it happens, to narrow down the source of the problem?
Hello!
Same problem with me but i´m not using the mentioned tool (privoxy) at all. No connection with imap, ichat and some google calendars in ical. Web browsing works without problem. I assume that this happened after upgrading to 10.6.5. One thing to mention: i am using accounts with low privileges, same with you, Allamistakeo?
regards
ulberbast

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old.

Why has my ipad lost connectivity to the AT&T cellular data network after upgrading to iOS 8.1.2? My iPad is model #MD367LL/A, 32 GB WIFI + Cellular, about 2-1/2 years old. It;s been working perfectly up until now. I have no problem on my home WIFI, or through personal hotspot working through my iPhone 5.
I have worked with AT&T, replaced the SIM card with a new one, and done a backup/restore to factory settings, all with the same result that when I turn Cellular
Data on, with or without Enable LTE, it goes into "searching" mode, or reports "no service". My iPhone 5 works perfectly on iOS 8.1.2, on Cellular. I've browsed the blogs and have tried Apple's suggested fix, all to no result.
Oddly enough, every once in a while I do get connected to the network for a short ime (minutes), but it always returns to "searching".
I've filed a report with Apple, along with a request that they contact me, but no results yet.
Help? (and thank you).

Hello razmee209. Thank you for your response. I spent the better part of yesterday working with Apple Support. They tried their best, to include backing up photos to my HP laptop, backing up the iPad to iCloud, then resetting the iPad in total. Same problem. I restored from the cloud to recover my apps, same problem.
AT&T installed a new sim card - same problem. I spent time with AT&T Support yesterday, too. In both cases, (Apple and AT&T) the support techs who worked with me were extremely polite, courteous and helpful to the best of their abilities, but I think the problem lies deeper, and nobody at Apple is admitting they have a problem with iOS 8, that I'm aware of.
I didn't have this issue before I upgraded to iOS 8.1.2.
Everything else with the iPad works fine: WIFI, Personal Hotspot, email, all my apps, etc.
In browsing the web for this issue I see that many other folks have the same problem. I filed a report with Apple this morning, requesting that they contact me, but no word yet. I was going to go to iPhone 6, and had been considering the iPad Air 2, but I see reports of this problem with those units as well.
At this point I don't think I'll be spending any more money with Apple, at least not till this issue is resolved.
Thanks again for your response and suggestions.

Unable to access shared files over network after period of time.

First off, I don't think that this issue is related to our router, but I have been searching for a fix and can not find one. We have a WRT54GS. Now, on to our issue:
At my work, we have a small network with computers sharing files between the others. I have attached a network diagram to help explain this better.
Our Win7 machine is our main computer that shares an external hard drive with much information that the other computers need to access. What we have noticed is either after a sleep, or even a period of time of say, 2 hours, those files are no longer able to be accessed. The Win7 machine is still sharing them, but the WinXP machines are unable to access them anymore and my Mac can see the computer is unable to connect to the folders. I have gone and attempted to get some help over at Microsofts site but that was a fail. Here is the link to the forum post there. http://social.answers.microsoft.com/Forums/en-US/w7network/thread/f0a2e8d6-f75a-41d7-a280-c6f3adbffa...
A member there gave me this:
The Network connection is probably not resuming after sleep.
First try this, http://www.ezlan.net/Win7/power_save_win7.jpg
It is in the Network Connection Properties under the Network card configuration.
If it already checked this way, or does not work after checking, the Network card has to be taken out of the computer's Power Saving loop, and stay on all the time.
Otherwise, Updating the Card with the latest OEM drivers (downloaded from the computer's support site) might help too.
On a rare occasions, some cards might be "Quirky" in this regards and need to be replaced.
--I would like to add that this DOESN'T ONLY happen after sleep, it also happens after a time of being used.
I attempted those and no luck. This problem is still occurring and the only way we can fix it is by restarting the Win7 machine. But even if it is being used, we have no idea when those files are unable to be accessed.
*I will add that the Win7 machine is still able to access the other computers when this problem occurs if that helps.
**The Win7 machine is a Dell T3500 running Windows 7 64bit. I can provide specific hardware if needed. The drivers are all up to date as of yesterday.
***So upon looking in the Windows XP machine, both of the folders from the Win7 machine disappear once this problem occurs in the My Network Places folder. And one folder is on the internal drive, one is on external. The computers are in this situation now where I am unable to access them. The Win7 machine can read and write from the other computers, but the other computers can even see the Win7 Machine.
****All the connections are wired and are not using the wireless.
Thanks for any help that anyone may have for me!
Steve
Network Map > http://scubasblog.com/network.jpg
Dell Support Forum with same issue I posted >> http://en.community.dell.com/support-forums/network-internet-wireless/f/3324/p/19337620/19716797.asp...

It sounds like there is incompatibility issue with XP and Win7. To isolate this, do you have another Win7 machine? Try to add it to the network and check if the shared drives are accessible after sleep. If you don't have another computer, try virtual machine and create a Win7 system.
Update your LAN card driver from the manufacturer's site. Don't use the driver from windows update.
Lastly, does this happen to your XP machines? Like, one of the XP machine sharing a folder and falls asleep. When it wakes up, does Win7 machine can still access the shared folder?

Can't get my ipad1 to connect to my home wifi network after doing restore

Can't get my ipad1 to reconnect to my home wifi network after doing restore, help please

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Phaser 3250DN drops off network after printing one or two pages

I have a Phaser 3250DN printer that has started dropping off the network after switched on and printing one or two pages. If I power cycle the printer, it comes back online, but then drops off the network again almost immediately so I can't print any more pages. The printer fails to respond to pings while in this state. The printer is 4 years old but has had >extremely< light usage. We've printed about one thousand pages total and is only turned on when we want to print something so most of the time it's physically powered off.

Network drop-offs can occur for a variety of reasons and be triggered by a variety of causes. You may want to make sure you are using the latest software release on the product, as well as check the network firewall configuration settings. In addition, sometimes disabling unused networking protocols can reduce traffic the device is exposed to and ease the burden if traffic volume is what is shutting down the NIC.
Another thing to consider would be the network topography itself; make sure the device is on a subnet exposed to minimal broadcast/multicast traffic.
Finally, you can verify the device itself is physically functional by testing it with a laptop and crossover cable. If the drop-off behavior occurs while connected directly to another single computer, it may be indicative of an issue with the main board or hard drive.
You may also find additional support articles at the following link: Phaser 3250 KB - http://www.support.xerox.com/support/phaser-3250/support/enus.html
I hope this helps.
Have a great day.

What is the maximum iLife supported on my ibook g4

Im new to mac so bare with me , i bought a preowned ibook g4 with Os 10.5.8 its the late 2004 model so i assumed iLife 04 was the only compatable iLife but i have iWeb which i read was only introduced after the iLife 05 os i dont know what do , can anyone help? i need to know what the maximum iLife i can install

Hello Dsloan97,
PowerPC iLife requirements:
http://support.apple.com/kb/TA27615
After iLife 09 an intel Mac is required.
Note that different features of iLife have
different requirements such as DVD burner,
1GB RAM, G5 processor, ect.
If you want features available in later iLifes
make sure they work with your system.
I believe your G4 can be upgraded to 1.25 GB
of RAM. You might consider this.
Also, leave 15% available HD space. Your Mac
will run smoother. Also, remember to verify disc
and repair permissions using disc utility before and
after downloads and installs.
Good Luck
A

5 won't stop looking for network after successful connection

iPhone5 won't stop looking for wifi network after successful connection. Told by tier2 support it is software issue. Complete reset didn't work
Thanks

You do have to unmount any Network Drives when/before moving to another location.
I'm thinking the APPs that don't work right have some pref on the non-existing network drive/cpu, for instance, if they automatically open the last doc used.

ILife Support 9.0.2

I know when iLife Support 9.0.1 came out, my MBP pulled it in via software update (even thought I don't have iLife 09 except the latest iTunes). I see that iLife Support 9.0.2 came out, but SU doesn't wan't it yet. Since version 901 was needed, I wonder why 902 isn't.

Even odder than this. I installed ilife support 9.0.3 successfully. Then, I decided to upgrade to ilife 09 from 08. After installing ilife 09 and running software update, SU pulled in the ilife 9.0.3 update again and installed it. Installing ilife 09 must have made it think it needed again. Software update now shows it installes successfully twice.

No 3G connection on sprint network after IOS 7.0.2 upgrade. Any fixes?

Are there any know fixes for no longer having 3G connectivity on the Sprint network after IOS 7.0.2 upgrade? Seems like the newest 7.0.3 update does not fix this issue. Any help would be appreciated.

Hi ernesto70,
If you are having a No Service issue with your iPhone after a recent update, you may find the following article helpful:
iPhone: Troubleshooting No Service
http://support.apple.com/kb/ts4429
Regards,
- Brenden

Loss of Network after iLife Support 9.0.4 Sofware Update

Similar Messages

Maybe you are looking for