Loss of non internet channels

Hi everyone looking for some advice where possible. I returned home from work yesterday and i had a pop up on the general freeview channels advising Low signal but the internet channels were all ok so i reset and retuned but still only have the 60 or so internet channels and the others are no longer there.
Now the landlord has since put scaffolding round the property could this be the issue as i am not sure how the connection runs with it obviously not being your run of the mill tv ariel.
Thanks

Hi indierick,
Are you sure you the cable that is connected to the TV has the channels being broadcast ?
Any loose connections, etc ?
Just to make sure, can you plug the aerial into the TV (most TVs have an RF in) and see if the TV is picking up the channels ?

Similar Messages

Possible to make non-HD channel switch to HD channel? (like 7 to 507)

Hey, just got Fios installed this week and am liking it so far.
Quick question... I had Cablevision before this, and they had it set up so that if you put on an non-HD channel using an HD set top box, it automatically switched to the HD version of that channel.
Is there any way to make this happen with Fios? So like... if I put on 7, it would automtically change to 507.
Thanks in advance for any help.
Solved!
Go to Solution.

Welcome to FiOS, and welcome to the forums!
Unfortunately no. But if you will take the time to set up a Favorites list, if you haven't already done so, then you can at least somewhat minimize accidentally surfing to the SD channel by mistake. If you are interested in setting up a Favorites list, here is a link to a thread which should help you get started:
http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/Exploiting-FiOS-TV-Favorites/td-p/9935
With my Favorites list I have all of the HD channels I care about included, and only those SD channels I am interested in that are not duplicated by HD channels. And I must admit, it is pretty rare that I ever watch any SD channel any more.....
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248

How to Configure internet channel to a relay SMTP server

Hi men,
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software.
I have search and read Sun Messaging Administration document but haven't fought the guide.
./imsimta version
Sun Java(tm) System Messaging Server 7.0-0.04 32bit (built Jun 20 2008)
Thank and Regards,
Duc Tien.

tien86 wrote:
My problem is How to Configure internet channel(or outbound mail) sending to a relay SMTP server. I want to test my spam software. You can use the daemon channel keyword with the tcp_local channel e.g.
! tcp_local
tcp_local smtp nomx multiple remotehost inner switchchannel identnonenumeric \
pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth loopcheck \
daemon relay.yourdomain.com
tcp-daemonIf the relay SMTP server only has an A record then use "nomx" instead of "mx".
http://msg.wikidoc.info/index.php/Mx%2C_nomx%2C_nodns%2C_defaultmx%2C_randommx%2C_nonrandommx%2C_nameservers%2C_defaultnameservers_Channel_Options
The "multiple" keyword instead of "single_sys" helps performance by increasing the number of emails per connection when sending to a relay system.
http://msg.wikidoc.info/index.php/Multiple%2C_addrsperfile%2C_single%2C_single_sys_Channel_Options
Regards,
Shane.

Scheduled recording of internet channels failing.

Hi all
Have been having an issue with scheduled recordings on Discovery, Nat Geo etc -
When the scheduled recording of a single programme or series is due to start, the banner at the top of the screen shows it is recording the programme, but by and large it fails. On checking the 'recordings' list, the programme in question is not in the list with the red 'R' as you would expect. Eventually, the programme does show, but as a failed recording. No other devices are in use at the time and no error messages are shown. If I catch it early enough and cancel the failed recording and then re-enter the prog or series from the EPG, it records the remainder of the programme and then continues to work fine for the series. There are no issues with my internet connection or speed - Internet channels in HD work fine. The Youview box is either switched on, or in low eco mode, so not a startup issue - The problem therefore appears to be related to scheduling in advance.
Any ideas?

Hi AlanN,
Thanks for your post about the problems you are having recording the internet channels on Youview. Please use the 'contact the mods' link in my forum profile under the 'about me' section to send in your details and we'll get this investigated. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Spotify for non internet enable devices

Hi, my idea is basically to look for a way to make spotify available on non internet devices, like the ipod nano por example. I would like to be able to sync my playlists on my ipod or mp3 player direclty from my computer. The new apple music app doesnt do this so I think spotify needs to be a step ahead.

Updated: 2015-07-05Hi, a similar idea has been posted here:
https://community.spotify.com/t5/Live-Ideas/MP3-player-just-with-Spotify/idi-p/135212
While it's been marked 'Not Right Now', Spotify staff periodically reviews these ideas and may choose to implement it in the future. You may also be interested in reading an explanation why it is not likely to be implemented here.

Firefox 3.6.10 on WinXP spontaneously shuts down without warning after a certain time, whether or not the Internet is in active use, without disrupting or otherwise affecting any non-Internet programs running simultaneously.

Ffox 3.6.10 on a Compaq Evo N8OOv began spontaneously shutting down w/o warning, closing all Internet applications w/ot affecting the operation of the computer, including non-Internet programs running simultaneously. Avira AntiVir Personal and with Spybot gave no hits suggesting infection.

See:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]]
Your above posted system details show multiple Java Console extensions.
You can uninstall (remove) the Java Console extensions and disable the Java Quick Starter extension as you do not need them to run Java applets.
See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
See also http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0
Disable the Java Quick Starter extension: Tools -> Addons -> Extensions
Control Panel -> Java -> Advanced tab -> Miscellaneous -> Java Quick Starter (disable)

Failed back to back recordings on internet channel...

I've posted this on the BT Vision forum too as there was already a thread for the UFC issues but thought I would start one here too as we have a YouView+ Box
We have had BT's whole package (TV, broadband, phone) since we moved house in February as it was the cheapest way to get BT Sports to watch UFC without having to pay for millions of other channels we wouldn't really need as all we really wanted was a basic setup but with BT Sports so I could watch the UFC....
Ever since it was installed we have had the problem everybody else has detailed in other threads. If you set the UFC to tape prelims and then the main event on the same channel the second one fails. I exchanged a number of E-mails and phone calls at the time of first noticing this and was just told that it wasn't a known fault and no solution could be found other than "update your set top box software" etc.... Even when they asked us to try on a different channel, we randomly set 4 episodes of Friends to tape and every other one failed.
In recent weeks/months I have had other issues and work to deal with so have ceased going around in circles with call centres, E-mail support and your "live chat" support (Which I prefer to use due to having a slight speech impediment) who keep me queded for long amounts of time and then start the chat session with "Can we call you to discuss this issue", but I have been working around the problem by recording the prelims on normal BT Sports and the main on BT Sports HD. This works fine.... Which whilst it isn't ideal its a means to an end in the mean time. However there isn't an option for HD and normal for every channel which brings me to my next point.
Having tempororily forgot about this issue, the other night I set Sharknado 2 and then Sharknado 1 to record back to back on Scy Fy and upon checking our recordings yesterday the second of the 2 recordings had failed.
Even though BT claim there isn't an issue there clearly is and it's not just based on the licensing for the sports.
It only appears to affect the internet based channels as for the last few weeks I have sucessfully recorded back to back episodes of Family Guy and People Just Do Nothing on BBC Three every sunday with no issues.
I'm by no means an expert in this field but it would appear to me that there is some sort of issue with overlapping of recording times on Internet channels (i.e. the second program is trying to start recording whilst the first is still recording and this causes some sort of conflict as it would seem 2 things cannot recrod on the same internet channel at once).
PLEASE CAN BT RESOLVE THIS!!!!

Hi All,
We’ve been rolling out a network fix (unrelated to the latest software release) over the last couple of weeks and this should have resolved the problems you’ve noticed with back to back recordings. We still have certain geographic areas to cover over the next few days, but once that’s done, you should all notice that the problem goes away.
Sorry for the inconvenience.
Steve
BT TV Expert
I am a BT Employee and an expert on TV queries. I am here volunteering my own time to give advice, primarily on the BT Vision+ and YouView boxes. Go here for more info.
If my post has been helpful, please click on the Ratings star on the left-hand side of the post.

Is CS6 the last version able to install on a non-Internet-connected network?

I work on a govt network, which has no connection to the Internet, so we just purchased Photoshop CS6. Of course, we're having all sorts of problems because the damn application requires an Internet connection before it will run. We're working with Adobe to try to find a way around this, but it's extremely frustrating. I'm guessing we'll eventually be able to get an installer that doesn't try to connect to the Internet.
My question is: Assuming we can get PS CS6 functioning, is that the last version Adobe will build that will be installable on a non-Internet-connected network? That seems a bit short-sighted and will eventually cause the govt to remove all Adobe products from use. I can't imagine that's a scenario Adobe would be happy with, but maybe they don't care.
Thoughts? Does anybody else use Adobe products on a network that has no way to connect to the Internet? Have you found good workarounds for working with these annoying apps?

Thanks, John. I knew that, but have no way of registering or activating after install. I know that an installer can be built with the Serial Number built in that doesn't require an Internet connection, but I've never been able to get that to work. It takes half a day just to get the transfer approved to move it to the correct network, and after doing this six times, I've run out of patience. I'm not really sure what to do at this point. After over six hours on the phone with Adobe support, I've come to a brick wall. Adobe products are no longer viable on government networks. I'm surprised they've given up this large pool of users...

Installing flash on non internet computer

I have the Master Collection on my computer, which
intentionally is not connected to the internet. I would like to
download flash and transfer it to my non internet computer, but the
way the flash download is set up, I don't have the option of
downloading it as an exe file and transferring that file to the
other computer. Surely there is a way of doing this. Plus why
doesn't the master collection include the flash player?
Frustrated.
Bob Hager
Text

Sure you do.. An EXE download is available via this technote:
http://www.adobe.com/go/tn_19166

Non-Overlapping channels bleed over

I have multiple AP's in an arena enviornment. Now without violating the rule where an AP is assigned a non-overlapping channel, what is best practice if there are neighboring AP's within close proximity of each other and they are assigned the same channel?
For example, in our press level I have 2 AP's both on channel 11, the suite level below has a few more ap's where the signal bleeds over to the press level and even if some were on channel 1, 6, & 11 there would still be conflicting channels. I hope this questions makes sense.

Thanks for the points Rob! Things have been pretty busy the last couple months.
Planning RF fields is a three-dimensional thing, more or less dependent on the construction materials laterally and vertically.
Given that there are only the three channels (for 802.11g), you have no option other than stacking and staggering, like:
level3: 1--6--11--1--6--11--1--6--11
Level2: 6--11--1--6--11--1--6--11--1
Level1: 11--1--6--11--1--6--11--1--6
With the only real variation being the type of antennas you choose, the topology of the spaces, and the power levels of the APs. There's really no other way to do it (using only 802.11g).
NOW, what I'd recommend that you recommend is to add the additional capability for 802.11a. Many/most computer systems have dual band capability, most (Cisco) APs are rigged for dual band.
So light up that 802.11a channel and encourage the folks that can to move up there. It's an easy sell: more bandwidth ("sorta" ...but we're marketing here so outright lies are generally permitted), less interference, and better security (from the aspect of fewer hackers work this band because there's not enough "interesting" stuff on it, etc.).
The benefit to you is that you would have 40 non-overlapping channels ... much easier to plan.
I understand that you have some equipment and users that must remain on 802.11g (try to forbit B if you can, it's making the system slower and reducing your availability), but usually if you offer / encourage those with the capability to move to the better band, they'll take it.
Otherwise, start looking for places where you could say " You know, if I had an antenna with *this* kind of pattern, I could ..." because there probably is an antenna, somewhere, with that radiation pattern.
What you can't get in pattern, you can make up for with barriers, reflectors, etc.
Good Luck
Scott

Non-overlapping channels - 802.11a/n - need clarification

There seems to conflicting or inconclusive information the topics below. I have just been readying various docs using google searches. I am hoping to get some solid answers.
1) What channels for 802.11a are really non-overlapping? 8 or 12? I have read in some sources that it is 12 but the last 4 are for outdoor use(?).
2) in regards to 802.11a, channels 149 - 165 are considered for outdoor use so indoor availability is only 8 channels, correct?
3) What would be the non-overlapping channels for 802.11n? Indoor use only.
4) What happens when an 802.11n/a device and a traditional 802.11a device connect to the same network?
Thank you,

Hi Jacob,
Following diagram should helps you (Ref source )
Referencing this & if you look at your 4 queries you can find the proper answer. Here is my response
1) What channels for 802.11a are really non-overlapping? 8 or 12? I have read in some sources that it is 12 but the last 4 are for outdoor use(?).
As you can see, excluding UNII-2 extended there are 12 non overlapping channels (13 including CH165), depends on the different country regulations you can use those for indoor/outdoor deployments.
2) in regards to 802.11a, channels 149 - 165 are considered for outdoor use so indoor availability is only 8 channels, correct?
It depend on the courntry regulation. I think in US you can use that band(UNII-3) for both indoor/outdoor deployments. So in that case 12 CH availabel excluding UNII-2 extend band.
3) What would be the non-overlapping channels for 802.11n? Indoor use only.
802.11n in this band, you can aggregate two 20MHz channel, (effective 40MHz bandwidth). You can see 6 non-overlapping channels available with 40MHz width in those bands (80MHz & 160MHz option shown in the above diagram applicable to 802.11ac standard)
4) What happens when an 802.11n/a device and a traditional 802.11a device connect to the same network
802.11n device will communicate with 40MHz (if configured on you wireless network & client support channel bonding) & normal 802.11a client will connect using 20MHz channel without any CH bonding or aggregation
If that answers to your query pls mark this thread as "Answered"
HTH
Rasika
**** Pls rate all useful responses ****

Overlapping v's Non-overlapping channels...

I know it is bad practise to have more than one AP within the same cell area using the same channel, but wondered what the effects of this were. For example, if I had an AP in channel 6 and another AP ten yards from it in channel 6 also, what would be the repercussions?
Thinking about it logically, there would be radio collisions. Each AP could potentially try to transmit at the same time causing collisions. Therefore, you would see slow throughput and high error counts on the AP? Also, if a WLAN client transmitted a frame to a user on the wired network, each AP would receive it (regardless of association) and forward the frame on - resulting in the wired client receiving two copies of the same frame (one from each AP)???
Can anyone, explain why it is not good practise to have over-lapping channels (or any useful web links/documents)?
I will continue to use non-overlapping channels, but it would be nice to know why.
Thanks

Hi Darren,
That is a great question. Here are some links that have really good answers;
Channel Deployment Issues for 2.4-GHz 802.11 WLANs
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00802846a2.html#wp134263
Assigning 802.11b Access Point Channels
An important concept to note regarding channel assignments is that the channel actually represents the center frequency that the transceiver within the radio and access point uses (e.g., 2.412 GHz for channel 1 and 2.417 GHz for channel 2). There is only 5 MHz separation between the center frequencies, and an 802.11b signal occupies approximately 30 MHz of the frequency spectrum. The signal falls within about 15 MHz of each side of the center frequency. As a result, an 802.11b signal overlaps with several adjacent channel frequencies. This leaves you with only three channels (channels 1, 6, and 11 for the U.S.) that you can use without causing interference between access points.
From this link;
http://www.wi-fiplanet.com/tutorials/article.php/972261
Channels and international compatibility
Although the statement that channels 1, 6, and 11 are "non-overlapping" is incomplete, the 1, 6, 11 guideline has merit. If transmitters are closer together than channels 1, 6, and 11 (e.g. 1, 4, 7, and 10), overlap between the channels will probably cause unacceptable degradation of signal quality and throughput.
http://en.wikipedia.org/wiki/IEEE_802.11
Hope this helps!
Rob
Please remember to rate helpful posts.........

Data usage internet channels

Hi folks
I had infinity 1 installed yesterday & have youview box also. Forgive my ignorance but does watching any of the internet channels like bt sports use my data up? I have the 40gb max allowance.
Thanks
Si
Solved!
Go to Solution.

Hi, and welcome to the forum. The answer is no. Have a look here http://bt.custhelp.com/app/answers/detail/a_id/42695/kw/Do%20extra%20channels%20count%20towards%20my...

No internet channels

Since yesterday I have been unable to choose any internet channels either from the guide of by the channel number yet my broadband still works?? I get no errors it just won't let me 'ok' on the channel?? Any ideas and I want to watch the footy?

Yes we had the same today. All we did to fix it was to go the update software options in settings. It looked as though the software had already downloaded because it went straight into a restart and after then every thing was OK.
Its no good though just switching the box on and off - we did that before and the problem was still there until we updated the software.
However, the funny thing is we got the previous software update earlier this week and didn't know there was another one being downloaded so soon afterwards.

Bt sport not working but all Internet channels ok

For over about 2 months we have got the error message up ipc6011 whenever we try to watch bt sport. All other Internet channel work fine including catch up and you view. This is beginning to get frustrating as it is getting upto the end of the free months and we have barely watched any games. I have gone through the suggestions for the error online and it still doesn't work. Anyone have any suggestions?

Hi 123sim189,
Welcome to the forum and thanks for posting. Sorry you're having problems with the BT Sports service. You've mentioned going through the online help but can you double chack 'IPC' error codes on YouView and let me know if it helps. If you're still having problems after that drop me an email with your details and I'll take a look for you.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Loss of non internet channels

Similar Messages

Maybe you are looking for