Loss of power during system utility, now there is nothing!

I'm in desperate need of some here trying to figure out what happened when my notebook, a HP pavilion zd7000 CTO notebook suddenly shut off while running a utility program. I've taken the unit apart completely and there is no sign of any burn marks or anything else of that nature. My notebook doesn't overheat or get really hot for that matter due to the running of an additional cooling pad, which I may add also keeps my office nice and cool to.
I've got to get this problem fixed, everything is on my notebook, and I can't afford to just run out and get another, the USA government doesn't pay very well when you're disabled! I know someone has some answers for me, so please HELP!!!
9yearslost, paid the price so lets move on.

sooooo power was just lost? are any lights comming up?
does it starts at all anymore?
thanks

Similar Messages

I lost my internal speaker as a choice in output sound in system preferences. There is nothing on my output list. Now everything is stuck on mute...how do I fix this?

I lost my internal speaker as a choice in output sound in system preferences. There is nothing on my output list. Now everything is stuck on mute...how do I fix this?

It was red earlier, but not now.
Then try again. The red light indicates that an analog plug jammed the digital audio-out port in the "mute" position. The spec for the tip-to-shoulder distance is apparatenly tighter for digital ports than it is for analog plugs.
On my MacBook Pro, I insert the headphone plug only enough to hear that I have proper sound, and then quit pushing. In this photo, the headphones are giving proper sound quality and separation but the jack's stop shoulder, on a pair of name-brand headphones, is obvioulsy not touching the computer case.
The iMac has the same kind of port. Don't stick plugs in all the way--just until you here proper sound.

I am subscribed to iCal Jewish Calendar but the dates of holidays etc. do not appear on the calendar. They used to, but now there is nothing. What can I do to make the festivals show again?

I am subscribed to iCal Jewish Calendar but the dates of holidays etc. do not appear on the calendar. They used to, but now there is nothing. What can I do to make the festivals show again?

jd,
Instead of using the Apple supplied Jewish Holiday Calendar, try http://www.hebcal.com/ical/

HT201342 I cannot find any place to "Go to Mail Preferences". I have tried looking under both "Mail" and "System Preferences" and there is nothing there entitled "Mail Preferences". Where is that button located?

The instructions say "Go to Mail Preferences."
I cannot find any place called "Mail Preferences". I have tried looking under both "Mail" and "System Preferences" and there is nothing there entitled "Mail Preferences". Under "Preferences" there is no subheading as described in the iCloud instructions. Where is that "Mail Preferences" button located?

Open Mail, go to the 'Mail' menu, select Preferences.

My brand new ipod Nano is not being reconised on itune.I changed to the new itunes and now there is nothing on the left hand side as before and it just has the music. Help!

My brand new Ipod Nano is not being recognised on itunes and i cannot download music onto it.
\i changed to the new itunes and now there is nothing on the screen other than the music ie no options.
help please!

Try a different cable. And are you connecting directly to your computer or through a USB hub?

Install failed due to loss of power and Yosemite will now not go past login screen. Help!

I recently tried to install OS X Yosemite. unfortunately during the install my laptop was unplugged and the installation failed mid way through. Each time I start my mac I get to login screen and after logging in get an error message and told to restart and try again - which does not resolve the issue. Guest login do work to the safari screen. Any help hugely appreciated.
The error message reads:
You need to restart your computer. Hold down the power button until it turns off, then Press the power button again.
Behind system code, including:
panic(CPU 2 caller 0xffffff 80005418bf):
"process 1 exec of /sbin/launchd failed, errno 45"@/sourcecache/xnu/xnu-1699.32.7/bsd/kern/kern_exec.c:3546
Debugger called: <panic>
Backtrace (CPU 2), Frame: Return Address
0Xffffff80e8423e00 : 0xffffff8000220792
7 more lInes like the one above
BSD process name corresponding to current thread: init
MAc OS version:
not yet set
THen kernel version data.

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Unable to set cookie preferences in safari 5.1.5 by going to safari/preferences/privacy. It used to be there and now there is nothing showing under that tab.

I had looked at the cookies a couple of weeks ago. I deleted all cookies.
A few days ago my email was hacked into which sent a spam email to all my contacts. I changed my password to that account, warned everyone in my contacts, and haven't had a problem with email since.
However, I tried to do the 'delete all cookies' again and when I go to safari/preferences/privacy...there is nothing on that screen under that tab. Not even a question mark. I changed my history items to be removed every day from every week but don't think that would be the issue.
Any help would be greatly appreciated.

Uninstall SIMBL as follows.
Select Go ▹ Go to Folder… from the Finder menu bar, then enter the following text in the box that opens:
/Library
A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.
Application Support/SIMBL
InputManagers/SIMBL.bundle
LaunchAgents/net.culater.SIMBL.Agent.plist
ScriptingAdditions/SIMBL.osax
Log out and log back in.
Make sure you never reinstall SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

HT1414 I was trying to update my Ipad and now there is nothing on the Ipad and my computer does not even pick up that it is plugged into it

I was trying to update my Ipad using I tunes and I backed music and apps on my computer but I thought it was updating and then noticed that there was nothing on my Ipad. There is absolutely nothing on the iPad now and I have it still plugged into the computer but the I pad is not showing up in I tunes at all.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Mac mini won't boot after accidental loss of power during firmware upgrade

i accidentally hit the power switch on the wall during an upgrade (might even have been a firmware upgrade, I didn't really look at what was going on). Anyway, now it hangs on the silver Apple logo screen with a spinny wheel on reboot. It's only 3 months old, it's the $599 model.
What to do? I see that you can download firmware restoration disks but they appear to be limited to earlier versions of the Mac mini.

I took it to the Mac store today and they fixed it for free by booting from an external drive and finishing the half-baked system update. Now that I know how to do that, I can fix it myself next time.
Thanks to Alan at the Salem, NH store!!

My Ipad was 89% charged an hour ago. put it in sleep mode and came back and now there is nothing...I plugged it into my computer and it is not showing up as a device in iTunes...there is absolutely nothing...and it was just fine...hmmm...any ideas?

My Ipad dropped dead. I had 89% charge left. Came back an hour later after putting it to sleep and it is totally black...no response to plugging it in...usually there is a sound...when I plugged into my apple computer it doesnot even show up on itunes..no acknowlegement of it...no nothing...Ipad 3..new this last spring...I had an ipad 2 before this...so this is not my first rodeo as they say.Was wondering if anyone else has had this problem? Or is it just dead?

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Until the latest upgrade, I could open a new tab by clicking on a cross at the end of the last tab. Now there is nothing there. I canno open a new tab. Can you help me

At the right of the last tab, there was a cross (x). If I wanted a new web site opened while keeping the one I was in, I clicked on this and it opened a new page and I could go to other sites of my choice. The cross is no longer there, and I cannot find out how to open a new tab, and go to a new web site.

You can find the New Tab button showing as a '+' on the Tab bar.<br />
You can open the Customize window and drag the New Tab button that shows as a plus sign (+) from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
If you can't find the New Tab button then click the "Restore Default Set" button in the Customize window.<br />
If you want the New Tab button at the far right end of the Tab bar then place a flexible space to the left of it.<br />

I deleted my iCloud now there is nothing left on my phone can I get it back?

I need help I lost alot of vital info

sign back in . settings- icloud
or restore from a backup
Peace, Clyde

I have a 3gs, dropped in water, shorted out battery, battery replaced, got home plugged into itunes started restoring, stopped when it said add simcard, unplugged added simcard. Now ther is nothing, sceen blank, wont boot,

Keep getting errors, 3014, 3194, 1600, dont know what to do? i can get it to recovery mode, but no further

Those errors suggest you aren't running the latest version of iTunes.
1. Update iTunes to the latest - 10.3.1
2. Disable ALL security apps (firewall, antivirus/spyware) running on your computer.

HT4150 updated and now there is nothing comes on the screen?

I've updated and after rebooting nothing comes on the screen?

Updates are best done one at a time, in my opinion.
Reinstall with the 10.6 DVD again, and once installed ignore all the other offered updates (deselect them) and only update to 10.6.8. If that sucessfully restarts, then choose the other software updates one by one. That's my update voodoo rule No 1.
Don't use you computer while updates are being done. Just wait. That's my voodoo rule No 2.

I am getting Error that there is nothing to be processed.

I am trying to convert an access database to SQL 2008 Database. I have done this conversion multiple times with sucess but now I am getting the following error. I get this error when I try to create report, convert schema and migrate data.
"Conversion Error There is nothing to process."
Here is part of the log that was captured when I ran this conversion.
[Gui: Error] [7580/11] [2015-01-07 14:51:18]: LowLevelAdapter.DataMigrationError : DataMigrationError error: Microsoft.SSMA.Framework.Generic.DataMigrators.Default.DataMigrationNothingToProcessException: Data migration was not performed because no objects
were selected. ---> Microsoft.SSMA.Framework.Generic.Factories.Utils.NothingToProcessException: There is nothing to process.
   at Microsoft.SSMA.Framework.Generic.Factories.Utils.TreeTraverser`2.TraverseTree(TContext context, TState state, XNode sourceNode)
   at Microsoft.SSMA.Framework.Generic.DataMigrators.Default.DefaultTreeDataMigrator.DoMigrateData(IDataMigrationContext context, XNode subtree)
   --- End of inner exception stack trace ---
   at Microsoft.SSMA.Framework.Generic.DataMigrators.Default.DefaultTreeDataMigrator.DoMigrateData(IDataMigrationContext context, XNode subtree)
   at Microsoft.SSMA.GUI.Generic.LowLevel.AppCommandProcessing.Commands.SsmaAppDataMigrationCommand.StartMigrateData(Object context)
[Gui: Error] [7580/11] [2015-01-07 14:51:18]: Exception: Data migration was not performed because no objects were selected.
site: Void DoMigrateData(Microsoft.SSMA.Framework.Generic.DataMigrators.IDataMigrationContext, Microsoft.SSMA.Framework.Generic.XTree.XNode)
source: Microsoft.SSMA.Framework.Generic.DataMigrators.Default
   at Microsoft.SSMA.Framework.Generic.DataMigrators.Default.DefaultTreeDataMigrator.DoMigrateData(IDataMigrationContext context, XNode subtree)
   at Microsoft.SSMA.GUI.Generic.LowLevel.AppCommandProcessing.Commands.SsmaAppDataMigrationCommand.StartMigrateData(Object context)
[Gui: Error] [7580/11] [2015-01-07 14:51:18]: Inner Exception #1: There is nothing to process.
site: Void TraverseTree(TContext, TState, Microsoft.SSMA.Framework.Generic.XTree.XNode)
source: Microsoft.SSMA.Framework.Generic.Factories
   at Microsoft.SSMA.Framework.Generic.Factories.Utils.TreeTraverser`2.TraverseTree(TContext context, TState state, XNode sourceNode)
   at Microsoft.SSMA.Framework.Generic.DataMigrators.Default.DefaultTreeDataMigrator.DoMigrateData(IDataMigrationContext context, XNode subtree)
[Gui: Error] [7580/10] [2015-01-07 14:51:24]: LowLevelAdapter.ConvertTree : Convert error: Microsoft.SSMA.Framework.Generic.Factories.Utils.NothingToProcessException: There is nothing to process.
   at Microsoft.SSMA.Framework.Generic.Factories.Utils.TreeTraverser`2.TraverseTree(TContext context, TState state, XNode sourceNode)
   at Microsoft.SSMA.Framework.Generic.Factories.Utils.OpTreeTraverser`2.TraverseTree(TContext context, TState state, XNode sourceNode)
   at Microsoft.SSMA.Framework.Access.SqlServerTreeConverter.Access2SqlServerTreeConverter.TraverseTree(ITreeConversionContext context, TreeConversionState state, XNode sourceNode)
   at Microsoft.SSMA.Framework.Generic.TreeConverters.Default.DefaultTreeConverter.ConvertTree(XNode sourceNode, ITreeConversionContext context)
   at Microsoft.SSMA.GUI.Generic.LowLevel.AppCommandProcessing.Commands.SsmaAppConvertCommand.StartConvert(Object context).
[Gui: Error] [7580/10] [2015-01-07 14:51:24]: Exception: There is nothing to process.
site: Void TraverseTree(TContext, TState, Microsoft.SSMA.Framework.Generic.XTree.XNode)
source: Microsoft.SSMA.Framework.Generic.Factories
   at Microsoft.SSMA.Framework.Generic.Factories.Utils.TreeTraverser`2.TraverseTree(TContext context, TState state, XNode sourceNode)
   at Microsoft.SSMA.Framework.Generic.Factories.Utils.OpTreeTraverser`2.TraverseTree(TContext context, TState state, XNode sourceNode)
   at Microsoft.SSMA.Framework.Access.SqlServerTreeConverter.Access2SqlServerTreeConverter.TraverseTree(ITreeConversionContext context, TreeConversionState state, XNode sourceNode)
   at Microsoft.SSMA.Framework.Generic.TreeConverters.Default.DefaultTreeConverter.ConvertTree(XNode sourceNode, ITreeConversionContext context)
   at Microsoft.SSMA.GUI.Generic.LowLevel.AppCommandProcessing.Commands.SsmaAppConvertCommand.StartConvert(Object context)
Can anyone help with this problem? I have check permissions on the access file and the database and I have full permission on both. I have check makes on both the database and the access table so I know they are selected. I am stuck.

Some online resellers still have Snow Leopard in stock, but their prices are ridiculously high (Amazon.com is one). So your best bet is to call Apple; they will sell it for about $20 US as long as they still have stock.

Loss of power during system utility, now there is nothing!

Similar Messages

Maybe you are looking for