Loss of Raw settings when returning to Bridge
I use CS5 in IMAC using OSX 10.8.5. For years when I return from Camera Raw to Bridge the thumbnail updates with the camera raw settings. Recently, sometimes it fails to do this. Issue occurs on Macbook light also.
They are not showing raw edits even with high quality set up ... this does not resolve the issue.
Similar Messages
-
Loss of camera settings when importing raw files in Aperture 3
Hello Everyone,
I seem to have an issue with raw pictures taken with a Nikon D90. I noticed that when shooting in raw, any setting I used on the camera (for example B&W or landscape settings) are lost after the pictures are imported in A3. Did anyone else experience the same issue? Is there any solution to this?
Thanks,
ValShooting raw will always give best results and probably simplest to do any adjustments you want inside of Aperture. When you select B&W Aperture is not communicating with Nikon fully or visa versa. It is a simple and more rewarding experience to set B&W or any other settings in the Adjustments Pane in Aperture. There is another small tab also called Adjustments which opens a drop down window. Here there are a range of options to choose from one is B&W. Another pane then opens with red green or blue filters. B&W is sensitive to colour. With these you can change the way the grey scale sees things like the blue sky or foliage.
Another nice feature of raw is no need to worry about White Balance. Leave the camera on Auto WB, any inaccuracy can be easily sorted in Aperture. Nikon has quite good auto WB anyway.
To begin, it is best to consider raw as a starting point rather than a finished product until you get used to the things that do and don't interface twixed camera and Aperture.
I hope that is some help. Welcome to Aperture. Allan -
CR2 Files shot in MONOCHROME convert to RGB when uploading to BRIDGE..
How do keep our Canon 5D Monochrome settings when uploading to BRIDGE?
You can't.
The monochrome settings are just a flag to tell the Canon software to convert to grayscale at the time of converting the raw file. Adobe Camera Raw ignores those settings, which are proprietary and understood only by the Canon software. -
Bridge freezes when applying camera raw settings to large number of files
I have a folder with 32,000 frames from a time-lapse project that I'm doing. I'd like to apply the same camera raw adjustments to all of these files, and so follow one of the two methods below - neither of which are working with such a large set of files:
Method 1:
Select all files, open in camera raw.
Apply changes to the first image
Select all images, then synchronize the changes to all other images.
Unfortunately selecting "Open in Camera Raw..." just leaves bridge to hang. It's using a lot of memory and processor time, so I would assume it's working, but there's no progress bar or similar to indicate that it is.
Method 2:
Open first file in Camera Raw
Apply all changes, and exit camera raw.
Select all files in Bridge, right click on one and select "Develop Settings -> Previous Conversion"
Unfortunately the final step again leaves bridge just thinking. I waited around an hour, closed bridge, but unfortunately when I opened it again there was no sign that it had copied the camera raw settings onto any of the other files. My computer's pretty slow (see below) but it should have written one xmp file in an hour.
Question:
Does anyone have any workarounds other than repeating the process 32 times for 1000 images at a time?
System Info From Photoshop:
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows Vista 64-bit
Version: 6.0 Service Pack 2
System architecture: AMD CPU Family:15, Model:15, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 1
Processor speed: 1808 MHz
Built-in memory: 8062 MB
Free memory: 4508 MB
Memory available to Photoshop: 7140 MB
Memory used by Photoshop: 70 %
Image tile size: 132K
Image cache levels: 4
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 6150SE nForce 430/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1024, right: 1280
Video Card Number: 1
Video Card: NVIDIA GeForce 6150SE nForce 430
OpenCL Unavailable
Driver Version: 8.17.12.7533
Driver Date: 20110521050100.000000-000
Video Card Driver: nvd3dumx.dll,nvd3dum
Video Mode: 1280 x 1024 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 6150SE nForce 430
Video Card Memory: 128 MB
Video Rect Texture Size: 4096
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\MARTIN~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
H:\, 279.5G, 50.4G free
D:\, 149.0G, 108.1G free
E:\, 74.5G, 46.1G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1642
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 5,0,10,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEThe files are only 2MP each, and I have the same issue when I apply the changes to RAW files and JPG files. The error occurs though before any changes are applied, before the images would need to be recached, as when the error doesn't occur the dialogue box I mentioned pops up asking what to change.
Your specs sound more then enough I would think. Do you have set the option to Write cache to folders when possible and if so could you uncheck that option?
I don't have experience with this kind of numbers but I do dump the Bridge cache manually on a regular base (every new cycle it seems to be more stable so more interval in the periods of dumping cache) but my main folder contains usually around 6 to 7 K of DNG files from 21 MP dSLR. This starts caching without problems but takes a few hours before done.
Can't use the option cache for folder due to a longstanding problem with error message to replace the CacheT file, hence my question about your setting.
Also I have set the option to previews Always HQ and in the prefs have set the option to build monitor size previews.
As said, don't know the large numbers but the 2 MP files are very small and it should be possible for Bridge I would think?
Did you also try to create a new folder and place the files inthere. Or divide them in to three folders for testing? -
Image Skips when Returning from Camera Raw to Bridge
Hi Folks
When I finished editing my image in Camera Raw and returned to Bridge I could immediately view my edits in the Bridge preview window. As it took about a second to update I could see the unedited image and then the updated edited image. Happy with that!
Now, when I return to Bridge I do not get the image I have just been working on in Camera Raw in the preview window as before, it jumps to the next image which is a bit of a pain, because I have to keep going back to the previous image.
May I kindly ask if anyone knows whether this is a setting somewhere in Bridge / Camera Raw and how I can get to it, or have any idea why this is happening. any information would be gratefully received.
Thanking you in advance for your anticipated help!As has often and repeatedly been discussed in the Adobe Bridge Macintosh forum, Bridge 2.x (that comes with CS3) is easily the worst piece of software that has ever been released by Adobe—or any other major software developer.
Bridge 3.x (with CS4) was better. I have no experience with Bridge in CS5.
If you're staying with CS3, at least make sure that you have updated to version 2.1.1.9.
Wo Tai Lao Le
我太老了 -
Bridge jpeg thumbnails and previews get RAW settings
On jpeg files without any RAW setting applied, Bridge still applies RAW settings to the thumbnails and the preview are thus display incorrectly. Opening the file shows the jpeg as it should be, without RAW settings applied.
I have RAW preferences set to apply auto settings to RAW files without any current settings.
I have my RAW settings to open jpegs in RAW *only* when they already have settings. If I set this to disable jpeg support, then the RAW settings are not automatically applied to jpegs without existing settings. aka, Bridge redoes the thumbnails without the auto setting.
While it is correct to apply this to RAW files without settings, jpeg files are already "developed/printed" and should not get additional auto develop settings automatically applied.
My Bridge is 4.0.4.2
Raw is 6.3
-NormanThanks, I did, since it is affected by a RAW preference I figured a double post was acceptable.
-Norman -
Loosing D300 Picture Control settings when importing RAW files into CS3!!
Hi there...I would really appreciate some help!!
I have recently bought a D300/Tamron 17-50mm f2.8 which I love, however, I'm getting increasingly frustrated by either my lack of knowledge or some form of compatibility issue between the D300 and CS3!!
When importing I am loosing all the RAW Picture Control settings!! - e.g. If I shoot using Picture Control "Monochrome" CS3 rips out all of the settings and returns the RAW image back to the default camera settings!! It doesn't seem to be the D300 as Picture Control settings are retained when viewing the RAW images on the camera's screen.
Camera: D300/firmware - default install
Computer: MacBook Pro Intel 2.4Ghz/2Gb RAM | Operating System: OS X 10.5.4 (9E17) | Software: Abobe CS3 with CameraRAW 4.4.1 plugin (also tried beta 4.5 but to no avail!!)
Thanks in advance!!I am trying to open a NEF file (RAW format) from my card with PhotoShop CS3 and it does not work. These photos were taken with a Nikon D300. A window appears and the message read as follows:
"Could not complete your request because it is not the right kind of document"
Could someone help me?
I have searched the online material and I have not found a solution as of yet.
I have no issues opening JPEGs taken with a D300 and I can open NEF files that were taken with a Nikon D200...
I appreciate your help. -
TIFF & JPEG renders of RAW files appear different when viewed in Bridge
I am working with the demo of Photoshop CS6, with ACR 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x6 1090T, 16GB RAM, Win7-64bit, nVidia GTX 460 video w/1GB RAM, approx. 2.5 TB free space on multiple internal physical drives, Canon 50D, CR2 files. I have a camera profile generated through Profile Editor, and the monitor is calibrated with i-1 Match.
I have been practicing with the new Basic Panel controls (Process 2012). When I felt that I was getting the hang of them I started saving JPEG and TIFF files and noticed differences between what appears in Bridge and ACR. I worked on this for some time and searched out some other discussions in the Forum which seemed to talk about similar results. I have now tried Image Processor via Bridge, Save Image in ACR, and Open>Save manually in PS CS6. By whatever route, the TIFFs and JPEGs are different (lighter in the following examples, but this is not always the case), while PSD saves seem to be close, but not identical to the CR2 when viewed in Bridge or Photoshop. Here is a screen capture of Bridge thumbnails which show the differences.
I hope the labels come through legibly. The two images on the second row are CR2 and PSD respectively. What is really odd to me is that when I resaved the PSD file as a TIFF, the same sort of difference shows up in the TIFF. (See _MG_7960_via_PSD.tif above.) I have uploaded the CR2, its XMP, a TIFF and a JPEG on Sendspace (107 MB). I did this earlier in my experiments and regret that the file naming is not as informative as might be.
http://www.sendspace.com/file/t0lhko
I have run a few other ACR adjusted CR2 images through Image Processor and seen a variety of differences between the rendered files and the RAW versions. The differences seem to be in Exposure and Contrast. Most of these looked somewhat darker, unlike the examples above.
I will happily provide any other information on request. Thanks!
Photoshop System Info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:10, Stepping:0 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 6
Processor speed: 3511 MHz
Built-in memory: 16382 MB
Free memory: 13415 MB
Memory available to Photoshop: 14766 MB
Memory used by Photoshop: 71 %
Image tile size: 132K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 460/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 460
OpenCL Unavailable
Driver Version: 8.17.13.142
Driver Date: 20120515000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1200 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 460
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Kieren\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
E:\, 770.4G, 644.1G free
K:\, 931.5G, 482.3G free
L:\, 1.82T, 854.4G free
H:\, 1.75T, 505.2G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.1
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Entropy 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Maximum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mean 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Median 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
Minimum 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Range 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Skewness 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Sumi-e 13.0
Summation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
U3D 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Underpainting 13.0
Vanishing Point 13.0
Variance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEThanks very much for that lead, NormanPCN. I do have Auto Tone checked, though the rendered files in the example above do not have XMP sidecars. I will try unchecking Auto Tone even so, and post back when I see what happens.
Thanks again,
Kieren
EDIT: Bingo! I took Auto Tone off in ACR Preferences (in Bridge) and the non-RAW files immediately regenerated thumbs and previews. They now are indistinguishable from the PSD. There is still the very slight difference which I mentioned between the PSD and the CR2. While that seems odd, it is small enough to be relatively trivial.
Many thanks!
Thumbnail view w/o Auto: -
The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA
The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.
I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow. -
I want to open a project from a drive which is different than the original one, but which has exactly the same folder structure and files as the original drive. When opening the project, all files appear as missing because the drive is different. When I replace these missing files for the ones in the new drive, After Affects relinks all media. However, the camera-raw settings that were embedded in such files are lost: After Effects opens the files as no previous camera-raw correction had been done. Is there a way to avoid this?
What could be in my project that makes it unable to open?
-
Develop settings when importing RAW + jpeg
When importing NEF files from my D700 I apply the landscape sharpening pre-set and am happy with the results. However on my Fuji X20 I import RAW+jpeg rather than just RAW, in this situation if I use the landscape sharpening pre-set sharpening is applied to the jpeg as well as the RAW resulting in the already sharpened in camera jpeg being grossly over sharpened. If on the other hand I use none for the develop pr-set no sharpening or noise reduction is applied to the jpeg and a minimum amount applied to the RAW file, more or less what I want except I want the higher landscape sharpening applied to the RAW files. Is there anyway to modify the built in pre-sets so that they only get applied to the RAW files when importing RAW+jpeg pairs?
Dave RosserI believe the answer is No, you cannot apply a preset at Import time based on file type.
What you can do is after you import, filter on File Type and set it to JPG and apply another preset that changes the sharpening settings of the filtered set of files, then go back and turn off the filter and work with both sets of images as you want.
To filter by File Type, you need to go to Library Grid, enable the filter bar with the backslash \ key if necessary, then select Metadata, and either change one of the existing filter columns to say File Type or add a new File Type column.
Once you have created and applied the filter, you can save it as a filter preset that can be applied by the filter preset selector at the very right and just above the thumbnail strip at the bottom, even in Develop mode.
You might make one for raw and for jpg in case you want to swap between the two, and if you shoot JPGs with more than one camera model, you can add the camera model to the filter criteria. -
My photos are in Raw Format when I open in Bridge and they appear very clean but when I transfer them to Photoshop they are full of noise. What should I do to fix the problem? Thanks.
are you sure its not just the way you are viewing the photo? you don't even see noise on the preview in Bridge and when I say preview I mean when zooming into the preview window. My thought process being in PS you are zoomed in more
-
OSxMavericks Mini Display Port Won't Return to Original Display Settings When Unplugged
I have a new MacBook Pro 13" Retina Display and display the screen on my Samsung TV. I have never had any problems with the display adjusting from the Samsung output back to the laptop settings when unplugged (on my old MacBook Air), but with OSxMavericks, it will not convert/adjust. When plugged in and displayed on the Samsung, the laptop display is very small; when subsequently unplugged, it is stretched and I have to manually reduce the size of each window. I would like it to be able to adjust to a larger display when plugged into the Samsung but then automatically adjust back to the smaller display when the mini displayport is unplugged. I feel that this is an easy setting to change, but I can't find it. Can anyone give me a tip? Thanks!
I had a MacBook Pro 2010 that was running 10.9.1 and worked fine using mdp to hdmi. Now I changed it to a pro 2012 running 10.9.2 and the same wire no longer works.
-
Custom Camera Raw settings not being recognised after copying to another mac
Images captured on MacBook Pro and custom settings applied in Camera Raw, images then transferred to Mac Pro via USB are opened on Mac Pro using Adobe Bridge CS6, Camera Raw doesn't recognise the custom setting and opens using the setting used last time in Camera Raw.
How do you retain the custom settings when transferring images and opening on another mac, the files are CR2 and the xmp files are also copied as well....and you did copy the xmp files as well as the RAW files to the second computer?
-
I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am not trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks
You want your user library
Mac(user)/Library/Application Support/Adobe/Camera Raw/Settings
In finder click on Go then hold down the Option key and then click on Library
Maybe you are looking for
-
I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?
-
Hi! I have synced all media files via Blackberry Desktop Software - all successful - but my MemoPad notes have cleared and i cannot find them anywhere on my Mac. Any ideas where they would be, or how to restore them? The new notes I have added sinc
-
Error executing DBMS_SCHEDULER
I am getting the following error :: select log_date,additional_info from user_scheduler_job_run_details where log_date = (select max(log_date) from user_scheduler_job_run_details); LOG_DATE ADDITIONAL_INFO 11-JAN-07 05.34.00.23434 AM -8:00 STANDARD_E
-
when I start to install de Adobe 9.3 Portuguese Version it do not install cause do not find archive "AdbeRdr930_pt_BR.msi". I do not have it in my computer. what can I do?
-
Question re upgrading agents to 12cR3
Hopefully I can ask this question clearly. I upgraded my OEM installation from 12cR1 to 12cR3 and have also successfully upgraded most of the agents. My question - The Agent Upgrade console shows a couple of agents which are not upgradable because th