Loss of signal aftrer 15 minutes with no use

how do I cahnge settings to allow audio file sto continue without interuption?

Interesting. I suspected something like that would happen. It's the way the iPhone 4 is "talking" to the cell towers. Perhaps in Buffalo you have much lower cell signal strength than is advertised by the bars, therefore any interference by hands will make it drop. And in Canadia, you're experiencing much stronger signal strength, therefore your hands don't even impact it all that much.
I have NO signal loss, bar drop, data speed drop, etc here in Los Angeles, Specially in my neighborhood. I know i must has a cell tower nearby, since i've never dropped a call or seen my bars drop below 5 bars for years and years now (3 years on orginal iPhone and 2 years on Cingular).
So i do suspect that it's an issue with how the bars are displaying signal strength and not so much hardware. Although, it could be both. But in my experiences so far, i have no issues what so ever.
Good test. Glad you reported this. Could shed some more light and help others

Similar Messages

  • IPhone Death Grip and Loss of Signal

    There is NO doubt the new iPhone has "death grip" "loss of signal" issues. Including my new iPhone, there are 4 Verizon phones in my home. All 4 phones show 3 bars when laying on the counter. The iPhone consistently, everytime, drops to 1 bar when it is picked up and held in a normal position. The other 3 phones (HTC Incredible, Blackberry Curve 8330, and an LG Cosmos all maintain 3 bars when picked up and held in a normal position. In fact, when I recived my first call on my iPhone the caller complained my voice was breaking up. NONE of my other phones have that problem. I called Verizon support on my iPhone, and they said my call was breaking up. I changed my holding position so I was pinching the the front and back of the phone (not touching any of the metal frame), and they said they could hear me much better. Nice test, huh? I have checked this situation over and over. I am not going to "pinch" my phone to use it. I am not going to spend more money on a bumper or case to use it. I am going to hold Verizon to their promise that that the known antenna issue with the iPhone was fixed. I am going to return my iPhone for a full refund and HIGHLY recommend that ANYONE who thinks the antenna issue is fixed is flat out WRONG. I HAD a lot of confidence in Verizon and Apple before this fiasco. There is NO DOUBT in my mind that both of them new full well that the defect still existed and still hyped and released a defective product. I will be the first to gladly participate in any class action suit that comes out of this - which I am sure it will. DO NOT BUY AN IPHONE 4.

    Verizon didn't promise you that the issue no longer existed (if a rep that hadn't had a chance themselves to see the phone until activating them for customers on the 10th told you this they were not the most reliable to respond unfortunately). Technically I don't recall Apple ever officially stating so (they never said they did the antenna changes as a "fix" to the issue...they said they did it to accomodate the CDMA chip), but if they did and it does not happen to be true for you and the phones in your household then by all means return them. At the end of the day, Verizon did not make the equipment....they just finally worked it out to get the rights to sell it with their service for the customers that have been begging for it for years. Be disappointed in Apple (as far as the antenna issue goes). For you, the issue exists. For others, it exists. For many, it does not. So being able to say there is NO doubt that the issue still exists is still very debatable at this point. Personally, I have had almost 1 full week (tomorrow) of crystal clear calls, no antenna issues, no dropped calls or dropped bars other than the normal that occurs with any phone on any network. Actually, the bars on my iPhone are interestingly more stable than those of my Blackberry Tour were.
    At any rate, I'm sorry that the iPhone did not live up to your expectations, but your experience is not definitive of all iPhone users any more than mine is.

  • HT4061 IPhone 4s Unexpected loss of signal

    Is there a Way I can contact someone at APPLE or somewhere else  so I can solve my software problem with my IPhone 4S?
    Unexpected loss of signal and communications have occurred to the point that I cannot use my phone any longer.  I went to see my telephone service provider and they told me that there is no problem with it (service, signal, chip, etc.) but they have been aproached by many IPHONE 4S users reporting the same problem.
    I have read many things about this matter in internet but no one seem to have solution to this. Everyone (around the world) agrees  that this is caused by a faulty software. I have updated my phone with  the latest version (OS 6)  and the problem has gotten worse. I also have battery problems since this one doesn't last not even 3 hours after the upgrading. I have found NO other place or option where  I can get support but this "Apple suport communities".  I bought my phone,factory unlocked, from Apple Store in NY and  actually I'm using it in La Paz, Bolivia (South America).
    I belive that if Mr. Jobs would still be alive things would have been different.
    Carlos

    I have the same problem with my 4s work ok for 1 week when I got it and now it keeps losing signal fix this apple please it's not my mobile provider everything is ok on there side.

  • Repeat loss of signal

    I have a WRT54G ver.6 and i am able to connect to the internet but loss the signal randomly every few hours. Upgraded Firmware with no luck. Somebody please help

    I had this same problem - lots of us apparently do. I read numerous threads, tried numerous changes to settings, upgrading the firmware, etc. I even tried a newer version of the router (WRT54G to WRT54GS). Nothing worked. I then tried changing to the DD-WRT firmware, and since then, I've had zero problems: no dropped connection, no rebooting the router.
    Visit http://www.dd-wrt.com/wiki/index.php/Main_Page for info on the firmware and instructions on how to download and install.

  • I suddenly get this connection is untrusted after being on website for five minutes with it working perfectly I want to turn this off.

    I was on the website like five minutes with it working perfectly. My firefox install is new as of two days ago. It suddenly decided the website's certificate is not updated. It wasn't updated five minutes ago, but was working perfectly then. I do not give a ''durn'' what firefox thinks. I want to see this website. There is no ignore this BS and take me to my website button. I want to know how to turn this off permanently. I tried updating firefox and I still have the same issue. Make it stop. My firefox is updated as of five minutes ago to the very newest version. My windows version whatever is also automatically updated so that's not it. I do not use any local antivirus because I am behind a firewall. It can't be the firewall because other computers in my network not using firefox have no problem with the website. Also cannot be my windows because other computers which are just ghosted over copies of the same as this one one my network with same exact default settings also with no changes to them just like this one but using another web browser have no trouble at all with this website. Seriously, nothing is different on the other computers on the network except the use of firefox. They work fine for this website. Firefox brand new update even does not work. Tell me how to fix it. I tried to do the stuff listed in certain other posts here. Apparently this version of firefox is different from the versions talked about when I google because certain parts of the answer don't fit what I see when I try to follow them with this version.
    ''Title edited by a Moderator''

    Make sure that the system time and date on your computer are set correctly.
    If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
    You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
    *Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    *Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
    You can see more Details like intermediate certificates that are used in the Details pane.
    Note that some firewalls monitor secure (https) connections and send their own certificate instead of the website's certificate.

  • I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    I JUST BOUGHT AND INSTALLED A LINKSYS E1200 WIRELESS N ROUTER AT HOME. MY IPHONE CONNECTS WITH A STRONG SIGNAL BUT WHEN I TRY TO USE THE INTERNET IT JUST LOADS FOREVER. HOW CAN I FIX THIS?????!!!!

    RESET YOUR ROUTER
    No. Reset your router.

  • Using keynote presentation on projector have had brief loss of signal

    I have changed projector and iPad and still experience during keynote presentation a brief loss of signal to projector.
    This happens at random and keynote presentation restarts on projector. Tried every source to help and followed all advice and it still
    happens at random.  Can play a movie using same gear no problem at all; Please Help.

    Please do not type in all caps, that is considered shouting on a public forum and also rude which I am sure is not your intent. I would also suggest reposting in the Keynot forum, that is where the Keynote gurus are likely to be.
    Good luck.

  • I am looking to find out if it is possible in Adobe Muse to have a section on a webpage that will update every 30 seconds or 30 minutes with a snapshot URL From a live webcam stream

    I am looking to find out if it is possible in Adobe Muse to have a section on a webpage that will update every 30 seconds or 30 minutes with a snapshot URL From a live webcam stream

    You can do this via insert HTML , you would need to use the live feed code in Muse page.
    Thanks,
    Sanjit

  • Loss of signal

    Over the past week I keep loosing my signal and it changes to "emergency calls only". I contacted vodafone who checked and advised that there was not a server issue then I visited the shop who gave me a new sim card, any advice on what the problem can be, also battery now drains within 24 hours, never used to be a problem?
    Thanks

    If you are traveling or moving about you may be experiencing a loss of signal strength which can cause what you describe.  24 hours on a Z10 is incredible battery life.  I use mine a lot and find that about 8-10 hours is the max I can go without switching out the battery or without charging.
    There also may be a sim card issue. Try swapping it out and see if that makes a difference.

  • Arch freezes after about 10 minutes with new kernel [SOLVED]

    As the title says: Arch freezes after about 10 minutes with new kernel (2.6.27). I can only move a mouse, but everything else is frozen. Even restarting X doesn't do a trick. It doesn't work at all. Frozen.
    I don't get any kind of error message (oh really?), so what's the problem..?
    Last edited by Exitium (2008-10-22 15:29:27)

    juan_sck wrote:
    Exitium wrote:
    test1000 wrote:I had an issue with only being able to move the mouse after logging in from gdm and nothing happening but i don't know if thats the same error Sooo, are you using the right nvidia drivers? their driverpolicy just changed, and we now have 4 different official nvidia drivers in repo :S
    Yeah... I'm using nvidia... So the problem is nvidia drivers, not the Linux kernel?
    Edit: My card is nVidia GeForce 8800 Ultra. I can't get driver information now, because I'm using WinXP right now. I'll check it later.
    Did you make a new install or just updated?
    You can try to reinstall old kernel with:
    pacman -U /var/cache/pacman/pkg/kernel(version you want).pkg.tar.gz
    if you made a new install you may have to install the xorg keyboard driver and so.
    By the way, there are a few diferent packages for nvidia drivers. Check wich is yours.
    Also check /var/log/ folder for errors.
    Updated kernel.
    And as I said, I'll check the driver later.

  • Stops import at or before 3 minutes with "unknown error",

    stops import at or before 3 minutes with "unknown error", VCR to CANOPUS to Computer. Also fails the same from a Cannon HV30 this happens only with Creative Cloud. have checked all cords also.
    This is the version of Premier Pro CC

    I went to another Apple store today and again brought up the issue of my iPod not syncing. As I mentioned before I've attempted to sync using two XP Pro computers with identical music files, different hardware but fully up to date XP Pro, including iTunes. Both failed. Identical music files on two iBooks running OSX (10.3.9) with up to date iTunes synced every time.
    Add to this that I went to two different friends with very different music libraries and had problems on their machines as well (both XP machines, one home, one Pro)...neither person had problems with syncing their newer iPods.
    At the store the guy did a restore of the iPod (something I've done many times) and he tested some 300 music files with no problem. He restored it again and gave it back to me.
    I brought the iPod home and successfully synced 3853 music files with ABSOLUTELY NO PROBLEMS! I don't have any clue what was different when he did the restores, but it worked.
    Of note, before anyone asks, everytime I've ever tried a sync on all of my computers or my friends computers, I've always triggered a restore to try to fix the iPod.

  • No video signal in remote connection with Mac mini when the display is off

    No video signal in remote connection with Mac mini when the display is off

    So you mean that Mac mini is different than other ordinary computer and is need an active display to avoid black screen in remote session!!!!!Oh my god, Steve would be embarrassed!

  • I phone 4s works one minute with tv out then stops?

    i phone 4s works one minute with tv out then stops?  Attached by rca out cable to my tv moniter. Does anyone know of similiar issues or do I have to reformatt and use Cydia tv out mirror?

    Follow the steps here:
    http://support.apple.com/kb/TS1559

  • Two signals on two outputs with specific time interval

    I cant manage with following:
    Have NI-6251 card. Trying to sent two step-signals on two outputs with
    specific time interval, say 1 to 10 ms with 1us accuracy.
    How can I start?
    Thanks!

    Hi Anonymous,
    What do you mean by step-signals?  Do you mean a signal that steps up the voltage over time, a step function signal that is zero until a certain time then goes to 1, or a pulse train?
    In the meantime you can find examples for getting started in the NI Example Finder by selecting Help » Find Examples
    When that opens you can limit the examples to ones that are compatible with your hardware.  In the bottom left corner select your hardware and check the Limit results to hardware box.
    Browse to Hardware Input and Output » DAQmx » Digital Generation or Generating Digital Pulses.
    Best Regards,
    Bryan H.

  • My iTouch is stuck in restore ipod software mode for about 30 minutes with little amount of update. What do I do?

    my iTouch is stuck in restore ipod software mode for about 30 minutes with little amount of update. What do I do?

    Disconnect the iPod
    Reboot the computer
    Try again. Place the iPod in  Recovery Mode  if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for