Loss of Sound in Company of Her

I have been working with the tech support folks at the game for several days. I lose sound in the middle of a game and the machine has to be rebooted to get your sound back at all. I have done everything in changing game settings and newest driver etc. etc. Many other folks have the same issues and most have the X-fi as far as I can tell. Finally I disabled my X-fi and enabled the on board sound of the motherboard and the issue went away. Obviously there is some level of difficulty between the game and I assume the Creative drivers. Has anyone else had the issue and if so have you found a way to resolve it's? Hope that Creative and/or Relic is working to resolve this. They also have pointed me to the crackle/pop issue in these forums and say they may be related. They also talk about conflict between SLI and X-fi. There are folks in the game forum that swear they can disable SLI and not have the issue as well. I have tried it for a couple of gaming sessions and have to admit the problem went away for me as well. Not sure what we are talking about here except it seems that Creative and Nvidia seem to have some issues which I hope they are working on.

hi?yes?my company of heroes freezes up and i get a soundloop crash i have to physicaly re start my system this happens from anything like 5 mins into a game to 45 mins different times all the time lol?i have also had this issue in bf242 crashes after around hours play same again freeses and sound loop?i have had the issue a couple of times over the last month with bf2 and css but these only happend twice in total so i am no overly concerned here?i have asked alienware to take my pc back and change the sound card but i dont think they will be able to fix it as i really do think its a driver issue with the newer games as my older games or games not using the XFI technology seem fine?JedMessage Edited by kingjed on -06-200605:7 AM

Similar Messages

Loss Of Sound Sync - FC7

Hi Gang
Working with FC7 in Snow Leopard 10.6.8 and an older Mac Pro.
Exported a 70 minute clip and noticed loss of Sound Sync, (about mid way thru in a QT File). The clip is a mixture of assorted clips.
Divided the 70 minute clip into 3 separate exported clips which produced proper 'Synced Sound' in each clip.
This problem used to occasionally happen in FC6 - Does anyone know a fix or work-around?
Thank You
Mike

"You've been in these forums long enough to know that FCP doesn't work well with non-FCP media"
Shane - I don't appreciate your constant negative replies - do me a big favor, and avoid responding to any more of my posts.
Yes, I've been here long enough to know you've always had a condescending attitude ....
Your approach is NOT helpful. Its rude and disrespectful ....

Loss of Sound HP Pavillion Entertainment Laptop DV6820ea

Hi,
Operating System:  Windows Vista
Sound Driver :         Conextant High Definition Smart Audio 221 (SPDIF INTERFACE)
Other Programmes: I Tunes
Problem :     Sudden loss of sound, I have tried the obvious such as is the touch sensitive mute switched off and the volumes switched on . I did briefly have my i-touch connected via USB but don't remember doing anything other than connecting and disconnecting the USB cable. Then there was no sound. I have also tried via control panel testing the devices and the speaker test works correctly but other than this I am unable to get any sound from the laptop. I did find, although I can't remember where, next to a I-tunes file name yellow triangles but was unabe to delete. This will probably be a very obvious and simple solution! but I would greatly appreciate any help!    many thanks

This often occurs when you plug in an HDMI device, on my machine. Try manually setting the playback device:
Right-click the speaker icon in the taskbar.
Select Playback Devices.
Right-click the audio device you want (i.e. Speakers)
Select Set as default device.
If this does not work, try logging in with an account that has administrative access. I discovered the wireless network can not be enabled by a non-administrative account, when it is disabled while logged in as an administrator. You have to go back to the admin account, enable wireless, and then log back to the other account.
Avoid updating your driver, unless the device no longer functions.

Loss of sound and video playback on ENVY X2

Every so often, more often than I would like, my HP Envy X2 loses sound and video playback capabilities; any ideas anybody? The concept of this machine is great and have had it for the past 9 months but this loss of sound and vision is so unpredictable and frustating...

Hi Brumage,
I saw your post regarding the sound and video issues and I will be happy to help. Do you get any error messages when this happens? Have noticed if it is a particular site like YouTube or program that you are using when the issue occurs or does it occur on all programs? When you restarted the Envy X2 does the issue go away?
I would start by suggesting that you make sure all updates have been installed through HP Support Assistant and Windows Update.
What operating system are you running? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Loss of sound (Hard-reset and restore does not work)

Hi,
I loss all sounds on my iPad 2 (currently on iOS 7.04). This is the 2nd time I have had this issue (had it with an earlier iPad) and had to replace the previous one (out of warranty period). Very frustrating as it is about the same time period after purchase. Last time, it seemed like a repeated fault with the iPad and I cannot believe I have the same issue again on a different product. It is an expensive way of having to re-buy every couple of years for no other reason.
It did not happen immediately after an update i.e. it does not appear to be "update" or iOS version-related.
Anyone got any advice please? The facts are as follows (and what I have tried).
When it happened?
I was in iMovie editing a movie when all sound went from the speaker. It continued to work with earphones plugged in, but this is now intermittent. I have no sound on the speaker at all except for when I click sounds on the menu and change the level of ringer alert (which works on the speakers). This seems to tell me that it is a software problem. I have no sound on any applications or internet video or music from iTunes. I cannot survive on the earphones as they only work for a period of time and then they fail (until I take the jack out again when it works again for a period of time before the headphones fail again).
What have I tried?
a) Numerous hard resets
b) changing the side switch's position
c) changing in general settings the side switch settings from lock rotation to mute and back again (repeatedly and in reverse to see if it makes any difference)
d) resetting all settings - this made no difference
e) erase all content and settings - interestingly at the stage when it asked me if I wanted to restore from an iCloud account, it was making sounds (the keyboard clicks - which don't make a sound irrespective of the click setting currently) i.e. appeared to have resolved the issue and as soon as I restored my iCloud back-up, the sound went again.
I would be grateful for any suggestions. This post also includes a recommendation to Apple on improving its product (relating to iCloud backups) as the ultimate solution should not be paying for a replacement for a software issue (to avoid losing all my data permanently).
My musings are that:
a) it is definitively a software issue (on account that the speakers work in certain situations only)
b) it appears to be that the software is corrupted in my iCloud back up
c) it is an issue that happens regularly and is an avoidable issue/cost to Apple's customers that needs to receive higher priority in being addressed as it is built in redundancy for a significant proportion of customers. At the very least, iCloud backups should be capable of being restored in part - is there any way this could be done so we don't lose all of our notes, media etc if the final advice is to "start again". How can it be right to lose all content because of an Apple system software issue? I am pre-guessing this will be the final advice (if I don't want to pay for a replacement iPad)?
Please help me and all those others with the same avoidable software problem.
Thank you,
Peter

This is an iPad user to user forum, so you are not addressing Apple.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Loss of sounds

Apparently like many Mt. Lion users I am experiencing loss of sounds, like mail arrival and send swoosh and trash emptying, when my computer awakes from sleep. Apple suggested the following fix - library/caches folder - delete folder, then hd/system/library/caches - delete folder contents only, which worked when i did it but problem returned after next reboot/sleep.
Anyone found a solution for this issue?
Thank u

Open /Applications/Utilities/Audio MIDI Setup
Select the Output device
In the bottom right set the Format at 44.1Hz 16bit and adjust the volume sliders then close.
In iTunes you can raise the Gain using the Equalizer (sadly the button has now gone from the bottom bar and is a /View item with no Keystroke)

Loss of sound during calls following updating iphone 4 with IOS5

I've recently updated my Iphone 4 with the IOS5 update. Since then I've had terrible problems with loss of sound on phonecalls. I can hear others but they cant hear me - loss of sound is patchy during a call. I've cleaned mic with a soft brush and rebooted but problem still exists. Any ideas before I restore factory settings/ and or take back to the shop?

I have a Iphone 4 and when i try to make calls, i cannot hear anything unless i put it on speaker, and sometimes if i try to turn the call volume up during a call without the speaker it almost sounds like the speaker is blown out. I just bought this phone online 2 days ago so i don't understand how that could happen.
Is anyone having this problem? I'm am totally lost with what to do other than return the phone in and see if i can get another one?
Please help!!!!!

Loss of sound in Windows XP in - requiring drivers to be re-loaded

This is a consistent problem under randem circumstances.
I suffer a complete loss of sound in Windows XP and the only resolution is to re-install the whole set of Bootcamp drivers or just the REALTEK audio drivers.
Sometimes after re-installing this still does not work.
Any experience of this and solutions?

Hello Ian and welcome to forums.
You might want to run the application 'Audio MIDI Setup' (/Applications/Utilities) and see if anything there is perhaps a mismatch with your particular audio configuration expectations...

Loss of sound on imac

I have a sudden loss of sound coming from my external speakers. I can only get it back if I re boot. This usually happens every day with no rhyme or reason.
The internal speakers are ok. I use the Bose companion 5 series speakers. It cannot be the Bose because if I re boot everything is ok for a while. any Ideas?
Snow Lepoard up to current version.
Model Name:    iMac
Model Identifier:    iMac9,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    3.06 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    6 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    IM91.008D.B08
SMC Version (system):    1.37f3

I have been there and done that.....makes no difference. Why do you think that the all of a sudden it would change the output in the first place? Things don't change by themselves for no apparent reason. It was still on the bose speakers when I went into sys pref. Amazing that you think that it would change itself everyday....did you really read my post or were you distracted?

Vist Basic & XFI, random loss of sound and World of Warcraft Hardware enabling iss

Hello.. First off want to say that prior to reinstalling Vista last week, I had no had any issues with my XFI and Vista.. Since the re-install, while running World of Warcraft and Ventrillo, I get random loss of sound. And by that, specifically I mean, the sound shuts off, and I get a constant loud hiss noise that does not stop until a reboot is performed. If I just run WoW and no Ventrillo, I dont get the random problem and the sound runs fine. It is however a highly annoying issue that requires too many reboots in evening. Getting to the point of just trying the onboard sound, which I'd certainly rather not do.
Additionally there is an option in WoW that allows for Hardware enabling, which is supposed to improve performance. When I check this box and restart the game, the box is still not checked. Not sure if this is a CL problem, but something is wrong for sure! I'm using the latest drivers that are on creativelabs.com for my Vista 32 bit system. And again, didnt have these issues prior to the fresh re-install of Vista. Before that I had stepped up the drivers all the way from Vista. Thanks for any feedback on this.

Not sure why your sound is cutting out... but as for WoW, it needs ALchemy installed to run with hardware audio enabled under Vista. I dont believe its in the list of titles included with ALchemy just yet, but adding it manually with the default options works just fine. Without doing this I believe the new sound core used in WoW will automatically detect that it cannot do hardware audio and simply uncheck the box whenever you try, where-as before it would work but still give you Software rendered sound (only instead of WoWs audio engine doing it, it was Vistas - not exactly an improvement). Incidentally, this not only improves performance but vastly improves the sound quality - especially when excessive numbers of sounds are being played. (eg Mass AoE effects on larger numbers of mobs, such as two Warlocks Hellfiring along with a Hurricane and Consecration while pulling the Ballroom - 9 mobs per group - near Moroes in Karazhan) Its possible doing this may also correct your cut-out issue, but its possible it wont. Ive been running WoW alongside Vent for months now under Vista w/ALchemy and an X-Fi and never had such a problem, but then I do also run Vent off the onboard audio so I can use a small earpiece and have voices clearly audible through game sound.

Crackling & loss of sound

2 weeks ago (just as my ipod went out of warranty) it developed crackling distortion and loss of sound. Initially thinking this was a headphone problem I tried different headphones but to no avail. Although I have had the ipod mini for 12 months I have only been regularly using it in the last 3 months. I calculate that I have had about 100 listening hours (a poor return on investment!) As I see that other people have also experienced this problem it suggests a design fault! What do I do now?

I have the same problem! It is intermittent, but extremely annoying. I first noticed it while using a Belkin adapter in my car... was convinced it was the adapter, tried another and got the same results. It now does the cracking when using the clickwheel as well as when connecting anything to the bottom of the unit. I can only use the iPod now if I hold it very carefully.. even then it sometimes does this and drops the signal. My unit is older, almost a year... but I am very disappointed, after blathering on to everyone about how great my iPod mini was for so long. Of course I am long out of warranty. Anyone have any suggestions?

How to solve loss of sound with ipad 2 with 6.01

How do you solve the loss of sound problem with an iPad 2 using IOS 6.01

iPad Mail
http://www.apple.com/support/ipad/mail/
Have you tried this?- Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
 Cheers, Tom

Intermittent and unpredictable loss of sound on 27" iMac

Hope someone can tell me where to start to troubleshoot.
I've had this problem before on my iMac 24" but this problem seems to have migrated to my new iMac Quad Core i7 27". (I had used migration assistant to transfer over my old system to this new computer).
Basically, it is an intermittent and unpredictable problem. Every now and then (it might happen only once a week), I would lose sound on my computer. I would hit the volume up and volume down key on the keyboard and even though the volume level indicator would go up or down, no "blip" sound would be heard and nothing happens. There is no pattern to this and I haven't noticed any consistency as to what I might be doing on the computer when this happens.
I could go into the system preferences and check the setting on the "sound" set up and nothing seems unusual or changed to me. No sound comes out of ANY application when this occurs. The strange thing is that if I was to do a quick switch to my wife's log-in, sound is generated in her log-in. Quick switch back to my account and still no sound!
The only way to definitely resolve the problem is to reboot the computer. Otherwise, sometimes logging out of and back into my account might resolve it. Or tonight, it seems like it resolved itself after I left the computer and came back to it after dinner.
Does anyone have suggestions of things to try to fix this intermittent problem?

I will try some of the things you have suggested when I get home.
Can't be the headphone jack socket. This happened with my previous iMac 24" and the current 27" as well. (Basically, seems like a setting or glitch that got migrated over.) Like I said in my original message, if I do a quick log-in switch to my wife's account, sound output is fine. So this is something happening with my log-in only. Seems like it has nothing to do with hardware.
I don't know about an OS re-install. This was a new computer only a couple of months old. So unless I do a fresh OS install AND don't migrate anything over from my old system, this is going to happen again. So I am more interested to see if there is some sort of setting or preference or something else to re-do.

Intermittant loss of sound

since i updated the software on my iphone 4 i have intermittant loss of sound i have researched and this is a common problem trouble is no one has an easy fix answer the best suggestion is to revert the phone back to the old software but i have no idea how to do this and apple dont seem to be acknowleging that they messed up with the update so if anyone can help i would be very gratefull
many thanks

I have been there and done that.....makes no difference. Why do you think that the all of a sudden it would change the output in the first place? Things don't change by themselves for no apparent reason. It was still on the bose speakers when I went into sys pref. Amazing that you think that it would change itself everyday....did you really read my post or were you distracted?

Loss of sound through USB Soundsticks

I've looked through the posts about sound loss and lots of people who are having issues get a symbol appearing or problems even after a restart - I don't!
I've had Soundsticks working for some years now but recently (certainly since 10.5.4) they work for a day or so then suddenly stop. Changing to another sound output (like internal speakers) shows that they are working OK but changing back does not restore the Soundsticks. A restart always cures it.
This suggest a USB more than sound issue but no other USB devices (printers) are affected and System Profiler can always see the Soundsticks.

Having the same problem here, Soundsticks (version 1), just stop. Unplugging from the USB port and plugging back in seems to work, as does unplugging from the AC cord and plugging back in. A real PITA though. Seems to have started happening since 10.5.5, though I can't say for certain. System Prefs still see them, and think they're working just fine, but no sound. I can also switch back to internal speakers, then back to the soundsticks and the audio will return, but only for a few minutes. Argh!

Loss of Sound in Company of Her

Similar Messages

Maybe you are looking for