Loss of sound in some programs?

Fresh from my previous problem which I managed to fix myself by chance, a new problem has arisen.
For some reason, the sound on various programs and applications just disappears for no apparent reason. Yesterday the trash had no sound to go along with it, whereas today it has returned and the sound on Football Manager has just disappeared.
Is there likely to be something causing this, either by me or a glitch or similar? Once again, any suggestions are appreciated.

As pointed out, it is a known issue and Apple has posted documentation although it's not entirely clear. Go to: Applications/Utilities/Audio MIDI Setup. Note: The default setting displays “Audio Input”
Anyway, from the pull down menu, it shows: Properties for “Built-in Microphone” on the left side of the screen, so from the “Properties For” pull down menu, select “Built in Output”. Then from the right side under “Audio Output” select “Format” and from the pull down menu, select 44100.0Hz and close MIDI Setup. This should resolve the absence of sound if the Mhz sampling rate was something different.
Regards,

Similar Messages

  • [SOLVED] No sound in some programs

    Recently, I don't know when or what has changed, I lost sound in a few programs.
    For example:
    Sound working in
    speaker-test -c 2
    mplayer
    mumble
    luakit
    not working
    chromium
    firefox
    warsow
    mpv
    So I started reading https://wiki.archlinux.org/index.php/Ad … m_problems and the mpv.conf ao=alsa fixed it for mpv. But there's nothing else there..
    And after searching the web for answers I tried figuring out what to put in my ~/.asoundrc or /etc/modprobe.d/alsa-base.conf ( I have never had anything in these files before when it was working but apparently this is what people use )
    $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: MID [HDA Intel MID], device 0: VT1708S Analog [VT1708S Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: MID [HDA Intel MID], device 3: VT1708S Digital [VT1708S Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    $ lspci -nn | grep -i audio
    00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
    01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series] [1002:aa58]
    What am I supposed to put in my ~/.asoundrc and/or /etc/modprobe.d/alsa-base.conf?
    I've tried a lot of combinations tonight but none that resulted in sound in all programs
    Last edited by rulex (2014-09-11 16:07:02)

    Yes, pulseaudio was installed and running... sound is now back everywhere after pacman -R pulseaudio and rebooting.
    Why was it installed though? There were only optional dependencies for it when uninstalling.
    $ cat /var/log/pacman.log
    [2014-09-09 17:46] [PACMAN] Running 'pacman -Syu'
    [2014-09-09 17:46] [PACMAN] synchronizing package lists
    [2014-09-09 17:46] [PACMAN] starting full system upgrade
    [2014-09-09 17:51] [PACMAN] upgraded aurora (34.0a2+20140907+g8a9db5d-1 -> 34.0a2+20140909+gf816f7e-1)
    [2014-09-09 17:52] [PACMAN] upgraded couchdb (1.6.0-1 -> 1.6.1-1)
    [2014-09-09 17:52] [PACMAN] upgraded dirmngr (1.1.1-2 -> 1.1.1-3)
    [2014-09-09 17:52] [PACMAN] upgraded filezilla (3.9.0.3-1 -> 3.9.0.5-1)
    [2014-09-09 17:52] [PACMAN] upgraded glib2 (2.40.0-1 -> 2.40.0-2)
    [2014-09-09 17:52] [ALPM-SCRIPTLET] Please make sure JAVA_HOME is set to /usr/lib/jvm/default
    [2014-09-09 17:52] [ALPM-SCRIPTLET] If not, you may have to logout and login again to set it according to /etc/profile.d/jre.sh
    [2014-09-09 17:52] [PACMAN] upgraded java-common (1-7 -> 1-8)
    [2014-09-09 17:52] [PACMAN] upgraded libwbclient (4.1.11-1 -> 4.1.12-1)
    [2014-09-09 17:52] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-09-09 17:52] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Starting build: 3.16.2-1-ARCH
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Starting build: 3.16.2-1-ARCH
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
    [2014-09-09 17:52] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-09-09 17:52] [PACMAN] upgraded linux (3.16.1-1 -> 3.16.2-1)
    [2014-09-09 17:52] [PACMAN] upgraded linux-headers (3.16.1-1 -> 3.16.2-1)
    [2014-09-09 17:52] [PACMAN] upgraded llvm-libs (3.4.2-1 -> 3.5.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded llvm (3.4.2-1 -> 3.5.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded mesa (10.2.7-1 -> 10.2.7-2)
    [2014-09-09 17:52] [PACMAN] installed gst-plugins-base (1.4.1-1)
    [2014-09-09 17:52] [PACMAN] installed sbc (1.2-1)
    [2014-09-09 17:52] [PACMAN] installed pulseaudio (5.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded phonon-qt4-gstreamer (4.7.2-1 -> 4.8.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded phonon-qt4-vlc (0.7.2-1 -> 0.8.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded phonon-qt4 (4.7.2-1 -> 4.8.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded phonon-qt5-gstreamer (4.7.2-1 -> 4.8.0-1)
    [2014-09-09 17:52] [PACMAN] upgraded smbclient (4.1.11-1 -> 4.1.12-1)
    [2014-09-09 17:52] [PACMAN] upgraded samba (4.1.11-1 -> 4.1.12-1)
    [2014-09-09 17:52] [ALPM-SCRIPTLET] To start and/or enable syncthing execute the following,
    [2014-09-09 17:52] [ALPM-SCRIPTLET] replacing 'user' with your username.
    [2014-09-09 17:52] [ALPM-SCRIPTLET].
    [2014-09-09 17:52] [ALPM-SCRIPTLET] systemctl start syncthing@user
    [2014-09-09 17:52] [ALPM-SCRIPTLET] systemctl enable syncthing@user
    [2014-09-09 17:52] [PACMAN] upgraded syncthing (0.9.11-1 -> 0.9.13-1)
    [2014-09-09 17:52] [PACMAN] upgraded tzdata (2014f-1 -> 2014g-1)
    [2014-09-09 17:52] [PACMAN] upgraded upower (0.99.0-2 -> 0.99.0-3)

  • Loss of sound in certain programs

    For some reason, once I open certain programs the sound goes away. If I open Finale, Soundhack, Itunes, or Audacity at the same time, the sound will go away within these programs. Sometimes even if I close the program before opening the next one, it will not play sounds. Two of the programs (Soundhack and Audicity) give me output errors. Even though the sound goes away for them, though, my effects and other sounds work. Quicktime plays fine too.
    At first I thought it was just a MIDI thing, but Quicktime will play midi's fine when the sound if off, too. I really have no idea what it could be. PLEASE HELP!
    Macbook Pro   Mac OS X (10.4.8)  

    Um, itunes worked fine. I re-opened Finale after closing Itunes too and it worked fine.
    It happens once in awhile, mostly when I need to use the program urgently to finish a piece or project.
    Last week I was working with soundhack, and then opened Audacity at the same time. Bad idea. Both quit working. Just to check, I opened Finale and it also didn't work. Finale works with MIDI, though, while the other work with AIFF.

  • Flash player 11.7  causes loss of sound on Smilebox program

    When Adobe updated Flash Player 11.6 to 11.7 caused me to lose sound on my Smilebox program   contacted Smilebox and they advised this is an Adobe problem and they need to fix    When is this going to be corrected 

    Could you please try our latest beta?
    4/23/2013 - Flash Player 11.7.700.191 Beta

  • Loss of sound in some apps after iOS 5 update....

    ABC Player works fine, trailers app has no sound neither does where's my water game? Have verified it's not the mute/orientation switch on the side! Anybody else had tis issue and if so is there a fix?

    I'm also experiencing this problem on my iPad2.  Music and sound effects otherwise work in other apps, but no sound plays in the Where's My Water app after the iOS5 install.

  • Sound working on some programs but not others (Pavilion dv6 Notebook PC)

    The sound is working for some programs (iTunes) on my laptop, but will not work with Chrome, Internet Explorer or BBC iPlayer Downloads.
    I'm at a loss to explain why. When I open up the Sound settings on the laptop, I can see that iTunes output plays on the 'Speakers and Dual Headphones' device, which is what I believe all my sound would usually come out from. I can hear it as usual.
    However, when I play audio in Chrome, no sound comes out, but it appears the device 'SPDIF (Digital Out via HP Dock)' is now playing the sound instead. The sound bar for this moves up and down while something is playing, but I cannot hear anything at all.
    It is as if my internet programs have been configured to have sound output through a device that does not actually exist. I tried fiddling around with Sound settings and 'Disabled' the SPDIF device, but nothing has actually changed. I would like to hook my internet audio back up to the 'Speakers and Dual Headphones' option but cannot work out how to.
    Sorry if this is not very well-explained, but I have never dealt with this problem before.
    Thank you so much if you're able to help - this is very frustrating!
    Edit: I also recently used a new HDMI cable to hook my laptop up to our TV and think this could be something to do with it

    Hi PacificBay,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I saw your post regarding the problems with the sound. Try setting your speakers as the default audio device. What operating system are you using? What is the product number for your Pavilion?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Loss of sound and video playback on ENVY X2

    Every so often, more often than I would like, my HP Envy X2 loses sound and video playback capabilities; any ideas anybody? The concept of this machine is great and have had it for the past 9 months but this loss of sound and vision is so unpredictable and frustating...  

    Hi Brumage,
    I saw your post regarding the sound and video issues and I will be happy to help. Do you get any error messages when this happens? Have noticed if it is a particular site like YouTube or program that you are using when the issue occurs or does it occur on all programs? When you restarted the Envy X2 does the issue go away?
    I would start by suggesting that you make sure all updates have been installed through HP Support Assistant and Windows Update.
    What operating system are you running? What is your product number?
    Find your product number on a notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    Finding your OS:
    http://windows.microsoft.com/en-CA/windows/which-operating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Audio doesn't work on some programs after boot (sometimes)

    Check new message dated 30.06.2014
    Hi,
    I'm having a weird problem. After booting my computer, the audio sometimes works perfectly, sometimes not at all, and sometimes it works on some programs but not on others. For example last night audio played without problem on Chromium, VLC and Amarok. Today after boot it played on VLC, but not Amarok (didn't realise to check Chromium), and now after reboot it plays on VLC and Amarok but not on Chromium.
    Chromium means YouTube (HTML5) and others (Flash).
    My DE is KDE (was xfce4 with mostly same audio trouble). Soundcard is USB DAC (SMSL Fort) and on KDE's Audio and Video setting I have it listed at the top and the "test" button works (i.e. it plays a sound).
    $ lsmod | grep '^snd'
    snd_hda_codec_realtek 54547 1
    snd_usb_audio 131640 2
    snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
    snd_hda_codec_hdmi 40208 1
    snd_usbmidi_lib 21428 1 snd_usb_audio
    snd_rawmidi 20278 1 snd_usbmidi_lib
    snd_seq_device 5244 1 snd_rawmidi
    snd_hda_intel 22270 4
    snd_hda_controller 22911 1 snd_hda_intel
    snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
    snd_pcm 83207 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 19294 1 snd_pcm
    snd 60780 24 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    $ ls -l /dev/snd/
    total 0
    drwxr-xr-x 2 root root 60 Jun 20 15:48 by-id
    drwxr-xr-x 2 root root 100 Jun 20 15:48 by-path
    crw-rw----+ 1 root audio 116, 2 Jun 20 15:48 controlC0
    crw-rw----+ 1 root audio 116, 8 Jun 20 15:48 controlC1
    crw-rw----+ 1 root audio 116, 6 Jun 20 15:48 controlC2
    crw-rw----+ 1 root audio 116, 5 Jun 20 15:48 hwC0D0
    crw-rw----+ 1 root audio 116, 13 Jun 20 15:48 hwC1D0
    crw-rw----+ 1 root audio 116, 3 Jun 20 15:48 pcmC0D3p
    crw-rw----+ 1 root audio 116, 4 Jun 20 15:48 pcmC0D7p
    crw-rw----+ 1 root audio 116, 10 Jun 20 15:48 pcmC1D0c
    crw-rw----+ 1 root audio 116, 9 Jun 20 15:48 pcmC1D0p
    crw-rw----+ 1 root audio 116, 11 Jun 20 15:48 pcmC1D1p
    crw-rw----+ 1 root audio 116, 12 Jun 20 15:48 pcmC1D2c
    crw-rw----+ 1 root audio 116, 7 Jun 20 15:57 pcmC2D0p
    crw-rw----+ 1 root audio 116, 1 Jun 20 15:48 seq
    crw-rw----+ 1 root audio 116, 33 Jun 20 15:48 timer
    Many thanks.
    Last edited by NGCjmo (2014-06-30 16:55:39)

    What is the ouput of cat /proc/asound/cards, aplay -l?
    For an example:
    [firekage@arch_desktop ~]$ cat /proc/asound/cards
    0 [XFi ]: SB-XFi - Creative X-Fi
    Creative X-Fi 20K1 SB073x
    1 [NVidia ]: HDA-Intel - HDA NVidia
    HDA NVidia at 0xf6080000 irq 17
    2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
    USB Device 0x46d:0x825 at usb-0000:00:14.0-7, high speed
    [firekage@arch_desktop ~]$
    [firekage@arch_desktop ~] aplay -l
    card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    [firekage@arch_desktop ~]$
    I think that you have multiple sound devices and their boot order changes after each reboot.
    Last edited by firekage (2014-06-20 13:13:05)

  • Satellite Pro M10 freeze and crash with some programs

    Hi
    I have a Satellite Pro M10...
    a few weeks ago it's freeze and crash with some programs like wmpayer, messenger... I delivered it in the authorized agent and they had not detected no problem.
    Already I formatted it some times, but the problem continues.
    Some ideia of what it can be?
    Thanks

    Hello,
    Sounds to me like you could have a Motherboard problem. Formatting it takes away the chances of it being a software issue. Try taking out 1 stick of ram and testing it with that. If it continues to crash, take out that stick and try the other one. If it does it with both RAM then those are ok. HDD is not the culprit, so now it could either be processor or MB. Find a program to measure the heat of the notebook and run some heavy programs to make it overheat. If the temperature goes up and then it crashes, it could just be overheating. If it continues without overheating you either have a problematic CPU or MB. Hope this helps.

  • [SOLVED] Unable to open some programs in KDE, HFS+ partiton needs fsck

    I've had two unsettling experiences today; I'm not sure if they're related or not.
    I have a Mid-2012 MacBook Pro. I installed bluez + bluez-utils 5.13.1-1 in order to use an Apple Wireless Keyboard and Magic Trackpad. Following the instructions in the wiki for setting up bluetooth devices using bluetoothctl, I was able to connect to the keyboard without a hitch. However, when I connected the trackpad, I would be able to move the mouse for a few seconds and then the whole system would freeze and I would have to force reboot. I tried this a few a times. I couldn't find any errors in the logs or dmesg; the last entry in dmesg would always show the trackpad being connected, so it seemed like whatever happened after that wasn't being logged. I found a couple recent bug reports, one for Arch and one for Fedora, with similar issues.
    I ran pacman -Syu in case my problem was due to outdated drivers or something, but it didn't get fixed. It's possible that the problems I've having now were caused by the update and have nothing to do with the trackpad, but I don't know.
    Here's what was upgraded:
    [2014-01-08 17:33] [PACMAN] starting full system upgrade
    [2014-01-08 17:34] [PACMAN] upgraded glibc (2.18-11 -> 2.18-12)
    [2014-01-08 17:34] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2014-01-08 17:34] [PACMAN] upgraded kdebase-workspace (4.11.4-2 -> 4.11.5-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-glibc (2.18-11 -> 2.18-12)
    [2014-01-08 17:34] [PACMAN] upgraded libdrm (2.4.50-1 -> 2.4.51-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-libdrm (2.4.50-1 -> 2.4.51-1)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-nvidia-304xx-utils (304.117-1 -> 304.117-3)
    [2014-01-08 17:34] [PACMAN] upgraded lib32-pcre (8.33-1 -> 8.34-1)
    [2014-01-08 17:34] [PACMAN] upgraded libcap (2.23-2 -> 2.24-1)
    [2014-01-08 17:34] [PACMAN] upgraded librsvg (1:2.40.1-1 -> 1:2.40.1-3)
    [2014-01-08 17:34] [PACMAN] upgraded libxfont (1.4.6-1 -> 1.4.7-1)
    [2014-01-08 17:34] [PACMAN] upgraded mesa (10.0.1-1 -> 10.0.1-2)
    [2014-01-08 17:34] [PACMAN] upgraded openssl (1.0.1.e-5 -> 1.0.1.f-1)
    [2014-01-08 17:34] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2014-01-08 17:34] [PACMAN] upgraded pacman-mirrorlist (20130830-1 -> 20140107-1)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server-common (1.14.5-1 -> 1.14.5-2)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server (1.14.5-1 -> 1.14.5-2)
    [2014-01-08 17:34] [PACMAN] upgraded xorg-server-devel (1.14.5-1 -> 1.14.5-2)
    In any case, now I can't open some programs; Skype and Okular both spend a while trying to open and then close again before anything happens. I also can't open the KDE application menu, although I can still launch programs with the quick launcher.
    Also, I have a non-journaled HFS partition that I use to store media and has been working fine, but now I can't write to it. In dmesg there's an entry from hfsplus saying "Filesystem wasn't unmounted cleanly, mounting it as read-only" and suggesting I run fsck.hfsplus, which doesn't seem to exist. I assume this message refers to my media partition. I tried doing a systemctl short health test which checked out fine, but I don't know that that really has much meaning here. I do have a backup of it if anything risky or drastic needs to be done.
    I'm generally new to Linux and not quite sure how to go about troubleshooting all this. I'd love some places to look, stuff to try, etc. Maybe I should try downgrading X server? I see some potentially weird stuff in my logs but nothing that looks like a smoking gun to me. However, I might just not know enough at this point to be able to recognize it.
    dmesg:
    There're a few firmware bugs and a segfault in konsole (see 0.047701, 0.257523, 12.077596, 27.185098).
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: \boot\vmlinuz-linux ro root=UUID=95c49290-b97c-4136-90a5-b8ae1b964cd7 initrd=boot\initramfs-linux.img
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x000000008cd12fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cd13000-0x000000008cd52fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000008cd53000-0x000000008cd68fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cd69000-0x000000008cd8efff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000008cd8f000-0x000000008ce3afff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008ce3b000-0x000000008ce8efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008ce8f000-0x000000008cecdfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cece000-0x000000008cefefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008cf91fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008cf92000-0x000000008cffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000008cfff000-0x000000008cffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000008d000000-0x000000008f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016f5fffff] usable
    [ 0.000000] e820: update [mem 0x8970c190-0x89721dcf] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008dfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000008e000-0x000000000008ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x000000000009ffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000040005000-0x000000008970c18f] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008970c190-0x0000000089721dcf] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000089721dd0-0x000000008cd12fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cd13000-0x000000008cd52fff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x000000008cd53000-0x000000008cd68fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cd69000-0x000000008cd8efff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x000000008cd8f000-0x000000008ce3afff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008ce3b000-0x000000008ce8efff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008ce8f000-0x000000008cecdfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cece000-0x000000008cefefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008ceff000-0x000000008cf91fff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008cf92000-0x000000008cffefff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000008cfff000-0x000000008cffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000008d000000-0x000000008f9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffe70000-0x00000000ffe9ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000016f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v1.10 by Apple
    [ 0.000000] efi: ACPI=0x8cd8e000 ACPI 2.0=0x8cd8e014 SMBIOS=0x8cd1b000
    [ 0.000000] efi: mem00: type=7, attr=0x80000000000000f, range=[0x0000000000000000-0x000000000008e000) (0MB)
    [ 0.000000] efi: mem01: type=0, attr=0x80000000000000f, range=[0x000000000008e000-0x0000000000090000) (0MB)
    [ 0.000000] efi: mem02: type=2, attr=0x80000000000000f, range=[0x0000000000090000-0x000000000009a000) (0MB)
    [ 0.000000] efi: mem03: type=7, attr=0x80000000000000f, range=[0x000000000009a000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f54000) (15MB)
    [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000001f54000-0x0000000020000000) (480MB)
    [ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040004000) (510MB)
    [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000040005000-0x000000007fcd7000) (1020MB)
    [ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007fcd7000-0x0000000080000000) (3MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000080000000-0x0000000088fbc000) (143MB)
    [ 0.000000] efi: mem13: type=1, attr=0xf, range=[0x0000000088fbc000-0x000000008936f000) (3MB)
    [ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000008936f000-0x000000008970c000) (3MB)
    [ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x000000008970c000-0x000000008972d000) (0MB)
    [ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000008972d000-0x0000000089741000) (0MB)
    [ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x0000000089741000-0x0000000089742000) (0MB)
    [ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000089742000-0x0000000089746000) (0MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000089746000-0x0000000089747000) (0MB)
    [ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x0000000089747000-0x0000000089cb2000) (5MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000089cb2000-0x0000000089cb4000) (0MB)
    [ 0.000000] efi: mem22: type=2, attr=0xf, range=[0x0000000089cb4000-0x0000000089ccf000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000089ccf000-0x0000000089cd0000) (0MB)
    [ 0.000000] efi: mem24: type=2, attr=0xf, range=[0x0000000089cd0000-0x0000000089d0f000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000089d0f000-0x0000000089d24000) (0MB)
    [ 0.000000] efi: mem26: type=2, attr=0xf, range=[0x0000000089d24000-0x0000000089d4a000) (0MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000089d4a000-0x0000000089d4b000) (0MB)
    [ 0.000000] efi: mem28: type=2, attr=0xf, range=[0x0000000089d4b000-0x0000000089d4d000) (0MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000089d4d000-0x0000000089d53000) (0MB)
    [ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x0000000089d53000-0x0000000089d55000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000089d55000-0x0000000089d65000) (0MB)
    [ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x0000000089d65000-0x0000000089d99000) (0MB)
    [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000089d99000-0x0000000089dba000) (0MB)
    [ 0.000000] efi: mem34: type=2, attr=0xf, range=[0x0000000089dba000-0x0000000089dbc000) (0MB)
    [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000089dbc000-0x0000000089eb2000) (0MB)
    [ 0.000000] efi: mem36: type=2, attr=0xf, range=[0x0000000089eb2000-0x0000000089eb9000) (0MB)
    [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000089eb9000-0x0000000089ec4000) (0MB)
    [ 0.000000] efi: mem38: type=2, attr=0xf, range=[0x0000000089ec4000-0x0000000089ec5000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000089ec5000-0x0000000089ec7000) (0MB)
    [ 0.000000] efi: mem40: type=2, attr=0xf, range=[0x0000000089ec7000-0x0000000089ecc000) (0MB)
    [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000089ecc000-0x0000000089ecd000) (0MB)
    [ 0.000000] efi: mem42: type=2, attr=0xf, range=[0x0000000089ecd000-0x0000000089ece000) (0MB)
    [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000089ece000-0x0000000089ed2000) (0MB)
    [ 0.000000] efi: mem44: type=2, attr=0xf, range=[0x0000000089ed2000-0x0000000089ed3000) (0MB)
    [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000089ed3000-0x000000008a123000) (2MB)
    [ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x000000008a123000-0x000000008a143000) (0MB)
    [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x000000008a143000-0x000000008b3ca000) (18MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x000000008b3ca000-0x000000008b3de000) (0MB)
    [ 0.000000] efi: mem49: type=1, attr=0xf, range=[0x000000008b3de000-0x000000008b413000) (0MB)
    [ 0.000000] efi: mem50: type=4, attr=0xf, range=[0x000000008b413000-0x000000008b41d000) (0MB)
    [ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x000000008b41d000-0x000000008b42b000) (0MB)
    [ 0.000000] efi: mem52: type=4, attr=0xf, range=[0x000000008b42b000-0x000000008b42d000) (0MB)
    [ 0.000000] efi: mem53: type=2, attr=0xf, range=[0x000000008b42d000-0x000000008b42e000) (0MB)
    [ 0.000000] efi: mem54: type=4, attr=0xf, range=[0x000000008b42e000-0x000000008b42f000) (0MB)
    [ 0.000000] efi: mem55: type=2, attr=0xf, range=[0x000000008b42f000-0x000000008b430000) (0MB)
    [ 0.000000] efi: mem56: type=4, attr=0xf, range=[0x000000008b430000-0x000000008b433000) (0MB)
    [ 0.000000] efi: mem57: type=2, attr=0xf, range=[0x000000008b433000-0x000000008b435000) (0MB)
    [ 0.000000] efi: mem58: type=4, attr=0xf, range=[0x000000008b435000-0x000000008b436000) (0MB)
    [ 0.000000] efi: mem59: type=2, attr=0xf, range=[0x000000008b436000-0x000000008b438000) (0MB)
    [ 0.000000] efi: mem60: type=4, attr=0xf, range=[0x000000008b438000-0x000000008b43b000) (0MB)
    [ 0.000000] efi: mem61: type=2, attr=0xf, range=[0x000000008b43b000-0x000000008b43e000) (0MB)
    [ 0.000000] efi: mem62: type=4, attr=0xf, range=[0x000000008b43e000-0x000000008b43f000) (0MB)
    [ 0.000000] efi: mem63: type=2, attr=0xf, range=[0x000000008b43f000-0x000000008b446000) (0MB)
    [ 0.000000] efi: mem64: type=4, attr=0xf, range=[0x000000008b446000-0x000000008b543000) (0MB)
    [ 0.000000] efi: mem65: type=2, attr=0xf, range=[0x000000008b543000-0x000000008b544000) (0MB)
    [ 0.000000] efi: mem66: type=4, attr=0xf, range=[0x000000008b544000-0x000000008b55f000) (0MB)
    [ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x000000008b55f000-0x000000008b567000) (0MB)
    [ 0.000000] efi: mem68: type=4, attr=0xf, range=[0x000000008b567000-0x000000008b57b000) (0MB)
    [ 0.000000] efi: mem69: type=2, attr=0xf, range=[0x000000008b57b000-0x000000008b57c000) (0MB)
    [ 0.000000] efi: mem70: type=4, attr=0xf, range=[0x000000008b57c000-0x000000008b582000) (0MB)
    [ 0.000000] efi: mem71: type=3, attr=0xf, range=[0x000000008b582000-0x000000008b584000) (0MB)
    [ 0.000000] efi: mem72: type=4, attr=0xf, range=[0x000000008b584000-0x000000008b58c000) (0MB)
    [ 0.000000] efi: mem73: type=3, attr=0xf, range=[0x000000008b58c000-0x000000008b593000) (0MB)
    [ 0.000000] efi: mem74: type=4, attr=0xf, range=[0x000000008b593000-0x000000008b594000) (0MB)
    [ 0.000000] efi: mem75: type=3, attr=0xf, range=[0x000000008b594000-0x000000008b595000) (0MB)
    [ 0.000000] efi: mem76: type=4, attr=0xf, range=[0x000000008b595000-0x000000008b597000) (0MB)
    [ 0.000000] efi: mem77: type=3, attr=0xf, range=[0x000000008b597000-0x000000008b598000) (0MB)
    [ 0.000000] efi: mem78: type=4, attr=0xf, range=[0x000000008b598000-0x000000008b599000) (0MB)
    [ 0.000000] efi: mem79: type=2, attr=0xf, range=[0x000000008b599000-0x000000008b59a000) (0MB)
    [ 0.000000] efi: mem80: type=4, attr=0xf, range=[0x000000008b59a000-0x000000008b59e000) (0MB)
    [ 0.000000] efi: mem81: type=3, attr=0xf, range=[0x000000008b59e000-0x000000008b5a3000) (0MB)
    [ 0.000000] efi: mem82: type=4, attr=0xf, range=[0x000000008b5a3000-0x000000008b5bd000) (0MB)
    [ 0.000000] efi: mem83: type=3, attr=0xf, range=[0x000000008b5bd000-0x000000008b5c1000) (0MB)
    [ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x000000008b5c1000-0x000000008b5c5000) (0MB)
    [ 0.000000] efi: mem85: type=2, attr=0xf, range=[0x000000008b5c5000-0x000000008b5c6000) (0MB)
    [ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x000000008b5c6000-0x000000008b5c8000) (0MB)
    [ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x000000008b5c8000-0x000000008b5c9000) (0MB)
    [ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x000000008b5c9000-0x000000008b5ca000) (0MB)
    [ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x000000008b5ca000-0x000000008b5d5000) (0MB)
    [ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x000000008b5d5000-0x000000008b5d9000) (0MB)
    [ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x000000008b5d9000-0x000000008b5db000) (0MB)
    [ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x000000008b5db000-0x000000008b5ec000) (0MB)
    [ 0.000000] efi: mem93: type=2, attr=0xf, range=[0x000000008b5ec000-0x000000008b5ed000) (0MB)
    [ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x000000008b5ed000-0x000000008b5f5000) (0MB)
    [ 0.000000] efi: mem95: type=3, attr=0xf, range=[0x000000008b5f5000-0x000000008b631000) (0MB)
    [ 0.000000] efi: mem96: type=4, attr=0xf, range=[0x000000008b631000-0x000000008b647000) (0MB)
    [ 0.000000] efi: mem97: type=3, attr=0xf, range=[0x000000008b647000-0x000000008b64a000) (0MB)
    [ 0.000000] efi: mem98: type=4, attr=0xf, range=[0x000000008b64a000-0x000000008b681000) (0MB)
    [ 0.000000] efi: mem99: type=3, attr=0xf, range=[0x000000008b681000-0x000000008b68f000) (0MB)
    [ 0.000000] efi: mem100: type=4, attr=0xf, range=[0x000000008b68f000-0x000000008b69d000) (0MB)
    [ 0.000000] efi: mem101: type=3, attr=0xf, range=[0x000000008b69d000-0x000000008b6b1000) (0MB)
    [ 0.000000] efi: mem102: type=4, attr=0xf, range=[0x000000008b6b1000-0x000000008b6b5000) (0MB)
    [ 0.000000] efi: mem103: type=3, attr=0xf, range=[0x000000008b6b5000-0x000000008b6bb000) (0MB)
    [ 0.000000] efi: mem104: type=2, attr=0xf, range=[0x000000008b6bb000-0x000000008b6bc000) (0MB)
    [ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x000000008b6bc000-0x000000008b6bd000) (0MB)
    [ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x000000008b6bd000-0x000000008b6bf000) (0MB)
    [ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x000000008b6bf000-0x000000008b6c6000) (0MB)
    [ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x000000008b6c6000-0x000000008b6df000) (0MB)
    [ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x000000008b6df000-0x000000008b6e0000) (0MB)
    [ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x000000008b6e0000-0x000000008b6e1000) (0MB)
    [ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x000000008b6e1000-0x000000008b6e2000) (0MB)
    [ 0.000000] efi: mem112: type=2, attr=0xf, range=[0x000000008b6e2000-0x000000008b6e3000) (0MB)
    [ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x000000008b6e3000-0x000000008b6e5000) (0MB)
    [ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x000000008b6e5000-0x000000008b6e6000) (0MB)
    [ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x000000008b6e6000-0x000000008b6e7000) (0MB)
    [ 0.000000] efi: mem116: type=2, attr=0xf, range=[0x000000008b6e7000-0x000000008b6e8000) (0MB)
    [ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x000000008b6e8000-0x000000008b6e9000) (0MB)
    [ 0.000000] efi: mem118: type=3, attr=0xf, range=[0x000000008b6e9000-0x000000008b6eb000) (0MB)
    [ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x000000008b6eb000-0x000000008b6ec000) (0MB)
    [ 0.000000] efi: mem120: type=3, attr=0xf, range=[0x000000008b6ec000-0x000000008b6f1000) (0MB)
    [ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x000000008b6f1000-0x000000008b6f2000) (0MB)
    [ 0.000000] efi: mem122: type=3, attr=0xf, range=[0x000000008b6f2000-0x000000008b6f3000) (0MB)
    [ 0.000000] efi: mem123: type=4, attr=0xf, range=[0x000000008b6f3000-0x000000008b6f6000) (0MB)
    [ 0.000000] efi: mem124: type=3, attr=0xf, range=[0x000000008b6f6000-0x000000008b6f7000) (0MB)
    [ 0.000000] efi: mem125: type=4, attr=0xf, range=[0x000000008b6f7000-0x000000008b6f9000) (0MB)
    [ 0.000000] efi: mem126: type=3, attr=0xf, range=[0x000000008b6f9000-0x000000008b6fb000) (0MB)
    [ 0.000000] efi: mem127: type=2, attr=0xf, range=[0x000000008b6fb000-0x000000008b6fc000) (0MB)
    [ 0.000000] efi: mem128: type=4, attr=0xf, range=[0x000000008b6fc000-0x000000008b6fe000) (0MB)
    [ 0.000000] efi: mem129: type=3, attr=0xf, range=[0x000000008b6fe000-0x000000008b702000) (0MB)
    [ 0.000000] efi: mem130: type=4, attr=0xf, range=[0x000000008b702000-0x000000008b705000) (0MB)
    [ 0.000000] efi: mem131: type=3, attr=0xf, range=[0x000000008b705000-0x000000008b70d000) (0MB)
    [ 0.000000] efi: mem132: type=4, attr=0xf, range=[0x000000008b70d000-0x000000008b710000) (0MB)
    [ 0.000000] efi: mem133: type=3, attr=0xf, range=[0x000000008b710000-0x000000008b715000) (0MB)
    [ 0.000000] efi: mem134: type=4, attr=0xf, range=[0x000000008b715000-0x000000008b716000) (0MB)
    [ 0.000000] efi: mem135: type=3, attr=0xf, range=[0x000000008b716000-0x000000008b717000) (0MB)
    [ 0.000000] efi: mem136: type=4, attr=0xf, range=[0x000000008b717000-0x000000008b718000) (0MB)
    [ 0.000000] efi: mem137: type=3, attr=0xf, range=[0x000000008b718000-0x000000008b71e000) (0MB)
    [ 0.000000] efi: mem138: type=2, attr=0xf, range=[0x000000008b71e000-0x000000008b71f000) (0MB)
    [ 0.000000] efi: mem139: type=4, attr=0xf, range=[0x000000008b71f000-0x000000008b720000) (0MB)
    [ 0.000000] efi: mem140: type=3, attr=0xf, range=[0x000000008b720000-0x000000008b722000) (0MB)
    [ 0.000000] efi: mem141: type=4, attr=0xf, range=[0x000000008b722000-0x000000008b724000) (0MB)
    [ 0.000000] efi: mem142: type=3, attr=0xf, range=[0x000000008b724000-0x000000008b728000) (0MB)
    [ 0.000000] efi: mem143: type=2, attr=0xf, range=[0x000000008b728000-0x000000008b729000) (0MB)
    [ 0.000000] efi: mem144: type=4, attr=0xf, range=[0x000000008b729000-0x000000008b733000) (0MB)
    [ 0.000000] efi: mem145: type=3, attr=0xf, range=[0x000000008b733000-0x000000008b738000) (0MB)
    [ 0.000000] efi: mem146: type=4, attr=0xf, range=[0x000000008b738000-0x000000008b741000) (0MB)
    [ 0.000000] efi: mem147: type=3, attr=0xf, range=[0x000000008b741000-0x000000008b75a000) (0MB)
    [ 0.000000] efi: mem148: type=4, attr=0xf, range=[0x000000008b75a000-0x000000008b75c000) (0MB)
    [ 0.000000] efi: mem149: type=3, attr=0xf, range=[0x000000008b75c000-0x000000008b76a000) (0MB)
    [ 0.000000] efi: mem150: type=4, attr=0xf, range=[0x000000008b76a000-0x000000008b76b000) (0MB)
    [ 0.000000] efi: mem151: type=3, attr=0xf, range=[0x000000008b76b000-0x000000008b76e000) (0MB)
    [ 0.000000] efi: mem152: type=4, attr=0xf, range=[0x000000008b76e000-0x000000008b771000) (0MB)
    [ 0.000000] efi: mem153: type=3, attr=0xf, range=[0x000000008b771000-0x000000008b780000) (0MB)
    [ 0.000000] efi: mem154: type=4, attr=0xf, range=[0x000000008b780000-0x000000008b781000) (0MB)
    [ 0.000000] efi: mem155: type=3, attr=0xf, range=[0x000000008b781000-0x000000008b785000) (0MB)
    [ 0.000000] efi: mem156: type=2, attr=0xf, range=[0x000000008b785000-0x000000008b786000) (0MB)
    [ 0.000000] efi: mem157: type=4, attr=0xf, range=[0x000000008b786000-0x000000008b78b000) (0MB)
    [ 0.000000] efi: mem158: type=3, attr=0xf, range=[0x000000008b78b000-0x000000008b78f000) (0MB)
    [ 0.000000] efi: mem159: type=4, attr=0xf, range=[0x000000008b78f000-0x000000008b792000) (0MB)
    [ 0.000000] efi: mem160: type=2, attr=0xf, range=[0x000000008b792000-0x000000008b793000) (0MB)
    [ 0.000000] efi: mem161: type=4, attr=0xf, range=[0x000000008b793000-0x000000008b797000) (0MB)
    [ 0.000000] efi: mem162: type=3, attr=0xf, range=[0x000000008b797000-0x000000008b798000) (0MB)
    [ 0.000000] efi: mem163: type=4, attr=0xf, range=[0x000000008b798000-0x000000008b79a000) (0MB)
    [ 0.000000] efi: mem164: type=2, attr=0xf, range=[0x000000008b79a000-0x000000008b79b000) (0MB)
    [ 0.000000] efi: mem165: type=4, attr=0xf, range=[0x000000008b79b000-0x000000008b79c000) (0MB)
    [ 0.000000] efi: mem166: type=3, attr=0xf, range=[0x000000008b79c000-0x000000008b7ae000) (0MB)
    [ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x000000008b7ae000-0x000000008b7af000) (0MB)
    [ 0.000000] efi: mem168: type=3, attr=0xf, range=[0x000000008b7af000-0x000000008b7b1000) (0MB)
    [ 0.000000] efi: mem169: type=4, attr=0xf, range=[0x000000008b7b1000-0x000000008b7b3000) (0MB)
    [ 0.000000] efi: mem170: type=3, attr=0xf, range=[0x000000008b7b3000-0x000000008b7bc000) (0MB)
    [ 0.000000] efi: mem171: type=4, attr=0xf, range=[0x000000008b7bc000-0x000000008b7c3000) (0MB)
    [ 0.000000] efi: mem172: type=3, attr=0xf, range=[0x000000008b7c3000-0x000000008b7c4000) (0MB)
    [ 0.000000] efi: mem173: type=4, attr=0xf, range=[0x000000008b7c4000-0x000000008b7c5000) (0MB)
    [ 0.000000] efi: mem174: type=2, attr=0xf, range=[0x000000008b7c5000-0x000000008b7c6000) (0MB)
    [ 0.000000] efi: mem175: type=4, attr=0xf, range=[0x000000008b7c6000-0x000000008b7c7000) (0MB)
    [ 0.000000] efi: mem176: type=3, attr=0xf, range=[0x000000008b7c7000-0x000000008b7d5000) (0MB)
    [ 0.000000] efi: mem177: type=4, attr=0xf, range=[0x000000008b7d5000-0x000000008b7d6000) (0MB)
    [ 0.000000] efi: mem178: type=3, attr=0xf, range=[0x000000008b7d6000-0x000000008b7e3000) (0MB)
    [ 0.000000] efi: mem179: type=4, attr=0xf, range=[0x000000008b7e3000-0x000000008b7e4000) (0MB)
    [ 0.000000] efi: mem180: type=3, attr=0xf, range=[0x000000008b7e4000-0x000000008b7ee000) (0MB)
    [ 0.000000] efi: mem181: type=4, attr=0xf, range=[0x000000008b7ee000-0x000000008b7ef000) (0MB)
    [ 0.000000] efi: mem182: type=3, attr=0xf, range=[0x000000008b7ef000-0x000000008b7f5000) (0MB)
    [ 0.000000] efi: mem183: type=4, attr=0xf, range=[0x000000008b7f5000-0x000000008b7f9000) (0MB)
    [ 0.000000] efi: mem184: type=3, attr=0xf, range=[0x000000008b7f9000-0x000000008b7ff000) (0MB)
    [ 0.000000] efi: mem185: type=4, attr=0xf, range=[0x000000008b7ff000-0x000000008b800000) (0MB)
    [ 0.000000] efi: mem186: type=3, attr=0xf, range=[0x000000008b800000-0x000000008b801000) (0MB)
    [ 0.000000] efi: mem187: type=4, attr=0xf, range=[0x000000008b801000-0x000000008b802000) (0MB)
    [ 0.000000] efi: mem188: type=2, attr=0xf, range=[0x000000008b802000-0x000000008b804000) (0MB)
    [ 0.000000] efi: mem189: type=4, attr=0xf, range=[0x000000008b804000-0x000000008b805000) (0MB)
    [ 0.000000] efi: mem190: type=3, attr=0xf, range=[0x000000008b805000-0x000000008b806000) (0MB)
    [ 0.000000] efi: mem191: type=4, attr=0xf, range=[0x000000008b806000-0x000000008b80b000) (0MB)
    [ 0.000000] efi: mem192: type=3, attr=0xf, range=[0x000000008b80b000-0x000000008b80d000) (0MB)
    [ 0.000000] efi: mem193: type=4, attr=0xf, range=[0x000000008b80d000-0x000000008b810000) (0MB)
    [ 0.000000] efi: mem194: type=2, attr=0xf, range=[0x000000008b810000-0x000000008b811000) (0MB)
    [ 0.000000] efi: mem195: type=3, attr=0xf, range=[0x000000008b811000-0x000000008b812000) (0MB)
    [ 0.000000] efi: mem196: type=4, attr=0xf, range=[0x000000008b812000-0x000000008b814000) (0MB)
    [ 0.000000] efi: mem197: type=3, attr=0xf, range=[0x000000008b814000-0x000000008b817000) (0MB)
    [ 0.000000] efi: mem198: type=4, attr=0xf, range=[0x000000008b817000-0x000000008b819000) (0MB)
    [ 0.000000] efi: mem199: type=3, attr=0xf, range=[0x000000008b819000-0x000000008b824000) (0MB)
    [ 0.000000] efi: mem200: type=4, attr=0xf, range=[0x000000008b824000-0x000000008b826000) (0MB)
    [ 0.000000] efi: mem201: type=3, attr=0xf, range=[0x000000008b826000-0x000000008b828000) (0MB)
    [ 0.000000] efi: mem202: type=4, attr=0xf, range=[0x000000008b828000-0x000000008b82c000) (0MB)
    [ 0.000000] efi: mem203: type=3, attr=0xf, range=[0x000000008b82c000-0x000000008b82d000) (0MB)
    [ 0.000000] efi: mem204: type=4, attr=0xf, range=[0x000000008b82d000-0x000000008b82f000) (0MB)
    [ 0.000000] efi: mem205: type=2, attr=0xf, range=[0x000000008b82f000-0x000000008b830000) (0MB)
    [ 0.000000] efi: mem206: type=4, attr=0xf, range=[0x000000008b830000-0x000000008b832000) (0MB)
    [ 0.000000] efi: mem207: type=3, attr=0xf, range=[0x000000008b832000-0x000000008b833000) (0MB)
    [ 0.000000] efi: mem208: type=4, attr=0xf, range=[0x000000008b833000-0x000000008b837000) (0MB)
    [ 0.000000] efi: mem209: type=3, attr=0xf, range=[0x000000008b837000-0x000000008b839000) (0MB)
    [ 0.000000] efi: mem210: type=4, attr=0xf, range=[0x000000008b839000-0x000000008b83b000) (0MB)
    [ 0.000000] efi: mem211: type=2, attr=0xf, range=[0x000000008b83b000-0x000000008b83c000) (0MB)
    [ 0.000000] efi: mem212: type=4, attr=0xf, range=[0x000000008b83c000-0x000000008b83d000) (0MB)
    [ 0.000000] efi: mem213: type=3, attr=0xf, range=[0x000000008b83d000-0x000000008b83e000) (0MB)
    [ 0.000000] efi: mem214: type=4, attr=0xf, range=[0x000000008b83e000-0x000000008b841000) (0MB)
    [ 0.000000] efi: mem215: type=3, attr=0xf, range=[0x000000008b841000-0x000000008b842000) (0MB)
    [ 0.000000] efi: mem216: type=4, attr=0xf, range=[0x000000008b842000-0x000000008b859000) (0MB)
    [ 0.000000] efi: mem217: type=3, attr=0xf, range=[0x000000008b859000-0x000000008b85e000) (0MB)
    [ 0.000000] efi: mem218: type=4, attr=0xf, range=[0x000000008b85e000-0x000000008b863000) (0MB)
    [ 0.000000] efi: mem219: type=2, attr=0xf, range=[0x000000008b863000-0x000000008b864000) (0MB)
    [ 0.000000] efi: mem220: type=4, attr=0xf, range=[0x000000008b864000-0x000000008b8bf000) (0MB)
    [ 0.000000] efi: mem221: type=3, attr=0xf, range=[0x000000008b8bf000-0x000000008b8d1000) (0MB)
    [ 0.000000] efi: mem222: type=4, attr=0xf, range=[0x000000008b8d1000-0x000000008b8ec000) (0MB)
    [ 0.000000] efi: mem223: type=3, attr=0xf, range=[0x000000008b8ec000-0x000000008b8ef000) (0MB)
    [ 0.000000] efi: mem224: type=4, attr=0xf, range=[0x000000008b8ef000-0x000000008b91b000) (0MB)
    [ 0.000000] efi: mem225: type=3, attr=0xf, range=[0x000000008b91b000-0x000000008b92f000) (0MB)
    [ 0.000000] efi: mem226: type=4, attr=0xf, range=[0x000000008b92f000-0x000000008b930000) (0MB)
    [ 0.000000] efi: mem227: type=2, attr=0xf, range=[0x000000008b930000-0x000000008b931000) (0MB)
    [ 0.000000] efi: mem228: type=4, attr=0xf, range=[0x000000008b931000-0x000000008b94d000) (0MB)
    [ 0.000000] efi: mem229: type=3, attr=0xf, range=[0x000000008b94d000-0x000000008b952000) (0MB)
    [ 0.000000] efi: mem230: type=4, attr=0xf, range=[0x000000008b952000-0x000000008b958000) (0MB)
    [ 0.000000] efi: mem231: type=2, attr=0xf, range=[0x000000008b958000-0x000000008b959000) (0MB)
    [ 0.000000] efi: mem232: type=4, attr=0xf, range=[0x000000008b959000-0x000000008b95a000) (0MB)
    [ 0.000000] efi: mem233: type=3, attr=0xf, range=[0x000000008b95a000-0x000000008b95b000) (0MB)
    [ 0.000000] efi: mem234: type=4, attr=0xf, range=[0x000000008b95b000-0x000000008b95c000) (0MB)
    [ 0.000000] efi: mem235: type=3, attr=0xf, range=[0x000000008b95c000-0x000000008b95d000) (0MB)
    [ 0.000000] efi: mem236: type=4, attr=0xf, range=[0x000000008b95d000-0x000000008b970000) (0MB)
    [ 0.000000] efi: mem237: type=3, attr=0xf, range=[0x000000008b970000-0x000000008b975000) (0MB)
    [ 0.000000] efi: mem238: type=4, attr=0xf, range=[0x000000008b975000-0x000000008b976000) (0MB)
    [ 0.000000] efi: mem239: type=3, attr=0xf, range=[0x000000008b976000-0x000000008b979000) (0MB)
    [ 0.000000] efi: mem240: type=4, attr=0xf, range=[0x000000008b979000-0x000000008b97a000) (0MB)
    [ 0.000000] efi: mem241: type=3, attr=0xf, range=[0x000000008b97a000-0x000000008b98b000) (0MB)
    [ 0.000000] efi: mem242: type=4, attr=0xf, range=[0x000000008b98b000-0x000000008b98e000) (0MB)
    [ 0.000000] efi: mem243: type=3, attr=0xf, range=[0x000000008b98e000-0x000000008b99a000) (0MB)
    [ 0.000000] efi: mem244: type=2, attr=0xf, range=[0x000000008b99a000-0x000000008b99b000) (0MB)
    [ 0.000000] efi: mem245: type=4, attr=0xf, range=[0x000000008b99b000-0x000000008b99c000) (0MB)
    [ 0.000000] efi: mem246: type=3, attr=0xf, range=[0x000000008b99c000-0x000000008b99d000) (0MB)
    [ 0.000000] efi: mem247: type=2, attr=0xf, range=[0x000000008b99d000-0x000000008b99e000) (0MB)
    [ 0.000000] efi: mem248: type=4, attr=0xf, range=[0x000000008b99e000-0x000000008b99f000) (0MB)
    [ 0.000000] efi: mem249: type=3, attr=0xf, range=[0x000000008b99f000-0x000000008b9a2000) (0MB)
    [ 0.000000] efi: mem250: type=4, attr=0xf, range=[0x000000008b9a2000-0x000000008b9a3000) (0MB)
    [ 0.000000] efi: mem251: type=3, attr=0xf, range=[0x000000008b9a3000-0x000000008b9a5000) (0MB)
    [ 0.000000] efi: mem252: type=2, attr=0xf, range=[0x000000008b9a5000-0x000000008b9a6000) (0MB)
    [ 0.000000] efi: mem253: type=4, attr=0xf, range=[0x000000008b9a6000-0x000000008b9a7000) (0MB)
    [ 0.000000] efi: mem254: type=3, attr=0xf, range=[0x000000008b9a7000-0x000000008b9a8000) (0MB)
    [ 0.000000] efi: mem255: type=4, attr=0xf, range=[0x000000008b9a8000-0x000000008bdc9000) (4MB)
    [ 0.000000] efi: mem256: type=3, attr=0xf, range=[0x000000008bdc9000-0x000000008bdce000) (0MB)
    [ 0.000000] efi: mem257: type=4, attr=0xf, range=[0x000000008bdce000-0x000000008be56000) (0MB)
    [ 0.000000] efi: mem258: type=3, attr=0xf, range=[0x000000008be56000-0x000000008be5d000) (0MB)
    [ 0.000000] efi: mem259: type=4, attr=0xf, range=[0x000000008be5d000-0x000000008be5e000) (0MB)
    [ 0.000000] efi: mem260: type=2, attr=0xf, range=[0x000000008be5e000-0x000000008be5f000) (0MB)
    [ 0.000000] efi: mem261: type=3, attr=0xf, range=[0x000000008be5f000-0x000000008be60000) (0MB)
    [ 0.000000] efi: mem262: type=4, attr=0xf, range=[0x000000008be60000-0x000000008be61000) (0MB)
    [ 0.000000] efi: mem263: type=3, attr=0xf, range=[0x000000008be61000-0x000000008be66000) (0MB)
    [ 0.000000] efi: mem264: type=4, attr=0xf, range=[0x000000008be66000-0x000000008be67000) (0MB)
    [ 0.000000] efi: mem265: type=3, attr=0xf, range=[0x000000008be67000-0x000000008be68000) (0MB)
    [ 0.000000] efi: mem266: type=4, attr=0xf, range=[0x000000008be68000-0x000000008be69000) (0MB)
    [ 0.000000] efi: mem267: type=3, attr=0xf, range=[0x000000008be69000-0x000000008be6a000) (0MB)
    [ 0.000000] efi: mem268: type=4, attr=0xf, range=[0x000000008be6a000-0x000000008be6c000) (0MB)
    [ 0.000000] efi: mem269: type=3, attr=0xf, range=[0x000000008be6c000-0x000000008be6d000) (0MB)
    [ 0.000000] efi: mem270: type=4, attr=0xf, range=[0x000000008be6d000-0x000000008be92000) (0MB)
    [ 0.000000] efi: mem271: type=3, attr=0xf, range=[0x000000008be92000-0x000000008be93000) (0MB)
    [ 0.000000] efi: mem272: type=4, attr=0xf, range=[0x000000008be93000-0x000000008c358000) (4MB)
    [ 0.000000] efi: mem273: type=2, attr=0xf, range=[0x000000008c358000-0x000000008c359000) (0MB)
    [ 0.000000] efi: mem274: type=4, attr=0xf, range=[0x000000008c359000-0x000000008ccf7000) (9MB)
    [ 0.000000] efi: mem275: type=2, attr=0xf, range=[0x000000008ccf7000-0x000000008ccf8000) (0MB)
    [ 0.000000] efi: mem276: type=4, attr=0xf, range=[0x000000008ccf8000-0x000000008ccfa000) (0MB)
    [ 0.000000] efi: mem277: type=2, attr=0xf, range=[0x000000008ccfa000-0x000000008ccfb000) (0MB)
    [ 0.000000] efi: mem278: type=4, attr=0xf, range=[0x000000008ccfb000-0x000000008cd03000) (0MB)
    [ 0.000000] efi: mem279: type=7, attr=0xf, range=[0x000000008cd03000-0x000000008cd13000) (0MB)
    [ 0.000000] efi: mem280: type=10, attr=0xf, range=[0x000000008cd13000-0x000000008cd53000) (0MB)
    [ 0.000000] efi: mem281: type=7, attr=0xf, range=[0x000000008cd53000-0x000000008cd69000) (0MB)
    [ 0.000000] efi: mem282: type=9, attr=0xf, range=[0x000000008cd69000-0x000000008cd8f000) (0MB)
    [ 0.000000] efi: mem283: type=7, attr=0xf, range=[0x000000008cd8f000-0x000000008ce3b000) (0MB)
    [ 0.000000] efi: mem284: type=6, attr=0x800000000000000f, range=[0x000000008ce3b000-0x000000008ce8f000) (0MB)
    [ 0.000000] efi: mem285: type=7, attr=0xf, range=[0x000000008ce8f000-0x000000008cece000) (0MB)
    [ 0.000000] efi: mem286: type=5, attr=0x800000000000000f, range=[0x000000008cece000-0x000000008ceff000) (0MB)
    [ 0.000000] efi: mem287: type=7, attr=0xf, range=[0x000000008ceff000-0x000000008cf92000) (0MB)
    [ 0.000000] efi: mem288: type=0, attr=0xf, range=[0x000000008cf92000-0x000000008cfff000) (0MB)
    [ 0.000000] efi: mem289: type=2, attr=0xf, range=[0x000000008cfff000-0x000000008d000000) (0MB)
    [ 0.000000] efi: mem290: type=7, attr=0xf, range=[0x0000000100000000-0x000000016f600000) (1782MB)
    [ 0.000000] efi: mem291: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem292: type=0, attr=0x8000000000000000, range=[0x000000008d000000-0x000000008fa00000) (42MB)
    [ 0.000000] efi: mem293: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
    [ 0.000000] efi: mem294: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem295: type=11, attr=0x8000000000000000, range=[0x00000000ffe70000-0x00000000ffea0000) (0MB)
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: Apple Inc. MacBookPro9,1/Mac-4B7AC7E43945597E, BIOS MBP91.88Z.00D3.B08.1208081132 08/08/2012
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x16f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable
    [ 0.000000] 2 base 090000000 mask FF0000000 uncachable
    [ 0.000000] 3 base 08E000000 mask FFE000000 uncachable
    [ 0.000000] 4 base 08D000000 mask FFF000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0x8d000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000090000] 90000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
    [ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
    [ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x16f400000-0x16f5fffff]
    [ 0.000000] [mem 0x16f400000-0x16f5fffff] page 2M
    [ 0.000000] BRK [0x02b35000, 0x02b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x16c000000-0x16f3fffff]
    [ 0.000000] [mem 0x16c000000-0x16f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x16bffffff]
    [ 0.000000] [mem 0x100000000-0x16bffffff] page 2M
    [ 0.000000] BRK [0x02b36000, 0x02b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x40003fff] page 4k
    [ 0.000000] BRK [0x02b37000, 0x02b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x40005000-0x8cd12fff]
    [ 0.000000] [mem 0x40005000-0x401fffff] page 4k
    [ 0.000000] [mem 0x40200000-0x8cbfffff] page 2M
    [ 0.000000] [mem 0x8cc00000-0x8cd12fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cd53000-0x8cd68fff]
    [ 0.000000] [mem 0x8cd53000-0x8cd68fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cd8f000-0x8ce3afff]
    [ 0.000000] [mem 0x8cd8f000-0x8ce3afff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8ce8f000-0x8cecdfff]
    [ 0.000000] [mem 0x8ce8f000-0x8cecdfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8ceff000-0x8cf91fff]
    [ 0.000000] [mem 0x8ceff000-0x8cf91fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x8cfff000-0x8cffffff]
    [ 0.000000] [mem 0x8cfff000-0x8cffffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x7fcd7000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 000000008cd8e014 00024 (v02 APPLE )
    [ 0.000000] ACPI: XSDT 000000008cd8e1c0 000B4 (v01 APPLE Apple00 00000000 01000013)
    [ 0.000000] ACPI: FACP 000000008cd8c000 000F4 (v04 APPLE Apple00 00000000 Loki 0000005F)
    [ 0.000000] ACPI: DSDT 000000008cd82000 04D53 (v01 APPLE MacBookP 00090001 INTL 20100915)
    [ 0.000000] ACPI: FACS 000000008cd1e000 00040
    [ 0.000000] ACPI: HPET 000000008cd8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: APIC 000000008cd8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SBST 000000008cd88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ECDT 000000008cd87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SSDT 000000008cd7f000 002E0 (v01 APPLE SataAhci 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd7e000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd79000 00D20 (v01 APPLE UsbPpt 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd75000 00032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd73000 015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6e000 013D8 (v01 APPLE TbtPEG11 00001000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6d000 00615 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6c000 00B3D (v01 PmRef CpuPm 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6b000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
    [ 0.000000] ACPI: SSDT 000000008cd6a000 0037A (v01 PmRef ApTst 00003000 INTL 20100915)
    [ 0.000000] ACPI: DMAR 000000008cd69000 00088 (v01 APPLE IVB 00000001 AAPL 00000001)
    [ 0.000000] ACPI: MCFG 000000008cd89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x16f5fffff]
    [ 0.000000] NODE_DATA [mem 0x16f5f7000-0x16f5fbfff]
    [ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff88016ac00000-ffff88016ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x16f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008dfff]
    [ 0.000000] node 0: [mem 0x00090000-0x0009ffff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x8cd12fff]
    [ 0.000000] node 0: [mem 0x8cd53000-0x8cd68fff]
    [ 0.000000] node 0: [mem 0x8cd8f000-0x8ce3afff]
    [ 0.000000] node 0: [mem 0x8ce8f000-0x8cecdfff]
    [ 0.000000] node 0: [mem 0x8ceff000-0x8cf91fff]
    [ 0.000000] node 0: [mem 0x8cfff000-0x8cffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x16f5fffff]
    [ 0.000000] On node 0 totalpages: 1032772
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 26 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8947 pages used for memmap
    [ 0.000000] DMA32 zone: 572583 pages, LIFO batch:31
    [ 0.000000] Normal zone: 7128 pages used for memmap
    [ 0.000000] Normal zone: 456192 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0008ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8970c000-0x8970cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x89721000-0x89721fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cd13000-0x8cd52fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cd69000-0x8cd8efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8ce3b000-0x8ce8efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cece000-0x8cefefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8cf92000-0x8cffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8d000000-0x8f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x8fa00000-0xe00f7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffe6ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffe70000-0xffe9ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffea0000-0xffffffff]
    [ 0.000000] e820: [mem 0x8fa00000-0xe00f7fff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88016f200000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016607
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: \boot\vmlinuz-linux ro root=UUID=95c49290-b97c-4136-90a5-b8ae1b964cd7 initrd=boot\initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3935088K/4131088K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 196000K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2294.978 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.20 BogoMIPS (lpj=7649926)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000032] init_memory_mapping: [mem 0x8ce3b000-0x8ce8efff]
    [ 0.000034] [mem 0x8ce3b000-0x8ce8efff] page 4k
    [ 0.000045] init_memory_mapping: [mem 0x8cece000-0x8cefefff]
    [ 0.000046] [mem 0x8cece000-0x8cefefff] page 4k
    [ 0.000086] init_memory_mapping: [mem 0x8d000000-0x8f9fffff]
    [ 0.000087] [mem 0x8d000000-0x8f9fffff] page 2M
    [ 0.026158] Security Framework initialized
    [ 0.026166] AppArmor: AppArmor disabled by boot time parameter
    [ 0.026167] Yama: becoming mindful.
    [ 0.026441] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.027488] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.027952] Mount-cache hash table entries: 256
    [ 0.028114] Initializing cgroup subsys memory
    [ 0.028122] Initializing cgroup subsys devices
    [ 0.028124] Initializing cgroup subsys freezer
    [ 0.028125] Initializing cgroup subsys net_cls
    [ 0.028127] Initializing cgroup subsys blkio
    [ 0.028148] CPU: Physical Processor ID: 0
    [ 0.028149] CPU: Processor Core ID: 0
    [ 0.028538] mce: CPU supports 9 MCE banks
    [ 0.028551] CPU0: Thermal monitoring enabled (TM1)
    [ 0.028560] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 1
    [ 0.028670] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.029671] ACPI: Core revision 20130725
    [ 0.036004] ACPI: All ACPI Tables successfully acquired
    [ 0.037838] ftrace: allocating 20318 entries in 80 pages
    [ 0.047613] dmar: Host address width 36
    [ 0.047615] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.047621] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
    [ 0.047622] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.047627] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.047628] dmar: RMRR base: 0x0000008d800000 end: 0x0000008f9fffff
    [ 0.047699] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
    [ 0.047700] HPET id 0 under DRHD base 0xfed91000
    [ 0.047701] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled
    [ 0.047705] Not enable interrupt remapping
    [ 0.047706] Failed to enable irq remapping. You are vulnerable to irq-injection attacks.
    [ 0.048157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.081147] smpboot: CPU0: Intel(R) Core(TM) i7-3615QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.081154] TSC deadline timer enabled
    [ 0.081162] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
    [ 0.081169] ... version: 3
    [ 0.081170] ... bit width: 48
    [ 0.081171] ... generic registers: 4
    [ 0.081171] ... value mask: 0000ffffffffffff
    [ 0.081172] ... max period: 0000ffffffffffff
    [ 0.081173] ... fixed-purpose events: 3
    [ 0.081174] ... event mask: 000000070000000f
    [ 0.118277] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.104573] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.240347] Brought up 8 CPUs
    [ 0.240351] smpboot: Total of 8 processors activated (36734.63 BogoMIPS)
    [ 0.247904] devtmpfs: initialized
    [ 0.250380] PM: Registering ACPI NVS region [mem 0x8cd13000-0x8cd52fff] (262144 bytes)
    [ 0.251164] RTC time: 7:32:07, date: 01/09/14
    [ 0.251202] NET: Registered protocol family 16
    [ 0.251294] cpuidle: using governor ladder
    [ 0.251296] cpuidle: using governor menu
    [ 0.251322] ACPI: bus type PCI registered
    [ 0.251324] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.251381] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
    [ 0.251384] PCI: not using MMCONFIG
    [ 0.251385] PCI: Using configuration type 1 for base access
    [ 0.251999] bio: create slab <bio-0> at 0
    [ 0.252116] ACPI: Added _OSI(Module Device)
    [ 0.252117] ACPI: Added _OSI(Processor Device)
    [ 0.252118] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.252119] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.253362] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.257523] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 2.254668] ACPI Exception: AE_ERROR, Returned by Handler for [PCI_Config] (20130725/evregion-287)
    [ 2.254672] ACPI Error: Method parse/execution failed [\_SB_.PCI0.ZYXW] (Node ffff880169288708), AE_ERROR (20130725/psparse-536)
    [ 2.254677] ACPI Error: Method parse/execution failed [\_SB_._INI] (Node ffff880169253fa0), AE_ERROR (20130725/psparse-536)
    [ 2.255095] ACPI: SSDT 000000008cd19190 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
    [ 2.255414] ACPI: Dynamic OEM Table Load:
    [ 2.255416] ACPI: SSDT (null) 008AD (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
    [ 2.268225] ACPI: SSDT 000000008cd1a710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
    [ 2.268583] ACPI: Dynamic OEM Table Load:
    [ 2.268585] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
    [ 2.281264] ACPI: SSDT 000000008cd18d90 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
    [ 2.281581] ACPI: Dynamic OEM Table Load:
    [ 2.281583] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
    [ 2.295568] ACPI: Interpreter enabled
    [ 2.295575] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 2.295579] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 2.295592] ACPI: (supports S0 S3 S4 S5)
    [ 2.295593] ACPI: Using IOAPIC for interrupt routing
    [ 2.295614] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
    [ 2.295963] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in ACPI motherboard resources
    [ 2.319936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 2.320064] ACPI: No dock devices found.
    [ 2.328628] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 2.328727] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 2.328815] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
    [ 2.329006] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
    [ 2.329109] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 2.329127] PCI host bridge to bus 0000:00
    [ 2.329129] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 2.329131] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 2.329133] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 2.329135] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 2.329136] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 2.329138] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 2.329139] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 2.329141] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 2.329142] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 2.329144] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 2.329145] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 2.329147] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 2.329148] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 2.329150] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 2.329151] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 2.329153] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 2.329154] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 2.329156] pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
    [ 2.329157] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 2.329165] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
    [ 2.329244] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 2.329277] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 2.329309] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 2.329346] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
    [ 2.329425] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
    [ 2.329464] pci 0000:00:01.1: System wakeup disabled by ACPI
    [ 2.329498] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
    [ 2.329509] pci 0000:00:02.0: reg 0x10: [mem 0xc1400000-0xc17fffff 64bit]
    [ 2.329516] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 2.329521] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
    [ 2.329611] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 2.329633] pci 0000:00:14.0: reg 0x10: [mem 0xc1c00000-0xc1c0ffff 64bit]
    [ 2.329696] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 2.329729] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 2.329765] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 2.329790] pci 0000:00:16.0: reg 0x10: [mem 0xc1c17100-0xc1c1710f 64bit]
    [ 2.329869] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 2.329945] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 2.329968] pci 0000:00:1a.0: reg 0x10: [mem 0xc1c16c00-0xc1c16fff]
    [ 2.330059] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 2.330095] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 2.330130] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 2.330143] pci 0000:00:1b.0: reg 0x10: [mem 0xc1c10000-0xc1c13fff 64bit]
    [ 2.330205] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 2.330240] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 2.330273] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 2.330352] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 2.330391] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 2.330423] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 2.330502] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 2.330540] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 2.330572] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 2.330653] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 2.330690] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 2.330733] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 2.330755] pci 0000:00:1d.0: reg 0x10: [mem 0xc1c16800-0xc1c16bff]
    [ 2.330846] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 2.330882] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 2.330917] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
    [ 2.331082] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
    [ 2.331102] pci 0000:00:1f.2: reg 0x10: [io 0x3098-0x309f]
    [ 2.331111] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
    [ 2.331120] pci 0000:00:1f.2: reg 0x18: [io 0x3090-0x3097]
    [ 2.331129] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
    [ 2.331137] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
    [ 2.331145] pci 0000:00:1f.2: reg 0x24: [mem 0xc1c16000-0xc1c167ff]
    [ 2.331192] pci 0000:00:1f.2: PME# supported from D3hot
    [ 2.331255] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 2.331269] pci 0000:00:1f.3: reg 0x10: [mem 0xc1c17000-0xc1c170ff 64bit]
    [ 2.331285] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 2.331414] pci 0000:01:00.0: [10de:0fd5] type 00 class 0x030000
    [ 2.331425] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
    [ 2.331436] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
    [ 2.331447] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
    [ 2.331455] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
    [ 2.331463] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
    [ 2.331519] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 2.331560] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
    [ 2.331569] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
    [ 3.338172] pci 0000:00:01.0: ASPM: Could not configure common clock
    [ 3.338218] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 3.338221] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 3.338223] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
    [ 3.338227] pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
    [ 3.338301] pci 0000:00:01.1: PCI bridge to [bus 05-9b]
    [ 3.338304] pci 0000:00:01.1: bridge window [io 0x4000-0x6fff]
    [ 3.338308] pci 0000:00:01.1: bridge window [mem 0xc1d00000-0xcdffffff]
    [ 3.338314] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
    [ 3.338460] pci 0000:02:00.0: [14e4:16b4] type 00 class 0x020000
    [ 3.338493] pci 0000:02:00.0: reg 0x10: [mem 0xc1800000-0xc180ffff 64bit pref]
    [ 3.338518] pci 0000:02:00.0: reg 0x18: [mem 0xc1810000-0xc181ffff 64bit pref]
    [ 3.338668] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 3.338738] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 3.338824] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
    [ 3.338861] pci 0000:02:00.1: reg 0x10: [mem 0xc1820000-0xc182ffff 64bit pref]
    [ 3.339051] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
    [ 3.339096] pci 0000:02:00.1: System wakeup disabled by ACPI
    [ 3.344942] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 3.344949] pci 0000:00:1c.0: bridge window [mem 0xc1b00000-0xc1bfffff]
    [ 3.344955] pci 0000:00:1c.0: bridge window [mem 0xc1800000-0xc18fffff 64bit pref]
    [ 3.345076] pci 0000:03:00.0: [14e4:4331] type 00 class 0x028000
    [ 3.345105] pci 0000:03:00.0: reg 0x10: [mem 0xc1a00000-0xc1a03fff 64bit]
    [ 3.345247] pci 0000:03:00.0: supports D1 D2
    [ 3.345286] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 3.351561] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 3.351568] pci 0000:00:1c.1: bridge window [mem 0xc1a00000-0xc1afffff]
    [ 3.351673] pci 0000:04:00.0: [11c1:5901] type 00 class 0x0c0010
    [ 3.351712] pci 0000:04:00.0: reg 0x10: [mem 0xc1900000-0xc1900fff 64bit]
    [ 3.351903] pci 0000:04:00.0: supports D1 D2
    [ 3.351904] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 3.358214] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 3.358221] pci 0000:00:1c.2: bridge window [mem 0xc1900000-0xc19fffff]
    [ 3.358742] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358790] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 3.358836] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358883] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 3.358929] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 3.358973] ACPI: PCI Interrupt L

    I did read that report initially; I ended up just removing bluez and bluez-utils since I don't care that much about using those peripherals. I imagine that if I downgraded the kernel I might be able to run bluez and get the trackpad to work. I think I'd rather keep my copy of the kernel up-to-date at this point since I don't really care that much about using that trackpad. Thanks for the suggestion, though—if I decide I really do want to use it I'll downgrade and see if that helps.
    The problems with running programs seem to have fixed themselves semi-mysteriously. That problem was persisting through reboots initially. I looked at the running processes and saw that the programs I had tried to open were actually running, but KDE wasn't behaving as such. I tried rebooting and using startx to see if I could see those programs running there, which I could. After that KDE behaved properly.
    It seems like HFS support for fsck is poorly if at all supported outside of Mac OS, so I booted into Mac OS and ran fsck_hfs on my media partition. This worked, and I can read and write from it again.
    EDIT: In case anyone is curious, there seems to be a fix pending for the trackpad issues—see here and here.
    Last edited by tenfoxes (2014-01-09 20:42:45)

  • I put some programe in icloud but not my account how can i re enstole again in my iphone but in my account in apple plese help my

    I put some programe in icloud but not my account how can i re enstole again in my iphone but in my account in apple plese help my

    Please help me??????

  • I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

    HI All
    I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
    I used IMAQ AVI Read Frame VI
    for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

    Hi abdelhady,
    I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
    There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
    Thank you,
    Emily C
    Applications Engineer
    National Instruments

  • Why is my Flash player not being recognized by some programs?

    Why is my Flashplayer not being recognized by some programs. Some keep informing me to download Flash player which I have done numerous times. My operating system is MS Vista and Widows 7.
    Please advise.

    What programs, for example?

  • Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

    Garageband is not picking sound from builtin mic (rMBP).
    I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
    All other apps can use the mic. Dictation, Skype etc. can use the mic!
    Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
    Can any one help me, Please!
    Many thanks!

    I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

  • Non-english keyboard layouts work in some programs, not others

    In some programs, I can set a non-English keyboard layout and have the appropriate behavior when it comes to diacritics - in, say, the brazilian layout, hitting { then a will give me a á, and so on. It works perfectly fine in Firefox and xchat, for instance. But in other programs, opera and openoffice to name two I've tried, this fails. I either get a garbage character when I hit the first diacritic key or I just get the diacritic by itself and then the accentless vowel: ´a.
    Completely non-English characters still work fine; I can get ç in the Brazilian layout and ñ in Latin American and the Georgian one works fine too, since Georgian doesn't have diacritics I presume. It's just diacritics that don't work.
    I first noticed this problem after I installed SCIM, so I assume it has something to do with the SCIM installation, but I don't know what I did in the process of installing it that would've messed things up.

    thayer wrote:Your best bet would be to post your problem to the dwm mailing list:
    [email protected]
    Will do...
    Thanks!

Maybe you are looking for