Loss of sound in Windows XP in - requiring drivers to be re-loaded

This is a consistent problem under randem circumstances.
I suffer a complete loss of sound in Windows XP and the only resolution is to re-install the whole set of Bootcamp drivers or just the REALTEK audio drivers.
Sometimes after re-installing this still does not work.
Any experience of this and solutions?

Hello Ian and welcome to forums.
You might want to run the application 'Audio MIDI Setup' (/Applications/Utilities) and see if anything there is perhaps a mismatch with your particular audio configuration expectations...

Similar Messages

Tecra 9100 - Loss of sound after Windows Update.

I have just got hold of a 9100 second hand, and have been re-installing XP Pro. I have been going well, and had all but the SD Card working after downloading all the relevant drivers off Toshiba's site.
Micorsofts update site decided to download new drivers for the Yamaha sound card, and now it says NO Device.
I re-installed the drivers from the toshiba site, but despite everything I do it still shows no device.
Ive tried re-installing the Synth software as well, but this says I need to run the synth re-installer. But there is no directory on the drive for anything Yamaha, and no entry in the add/remove window for yamaha synth or on the start menu.
I am at a loss where to go next, short of starting yet again, and re-installing from the OS up, and thats a good days work.
Does a clean up utility exist so I can just do the sound card part again?
Help Please. :-(

No sound? The only solution I've found is to get a USB headset like the Logitech USB Headset 20. I have had this same problem with my Tecra 9100 for almost 6 months. I tried on a pair of USB Headset and it works! because it bypasses your internal soundcard. The downside is that if you have a great pair of speakers on your laptop, then it's kind of a waste that you can never use it. But at least, with this, you can now listen to CDs and chat on the internet

Loss of Sound HP Pavillion Entertainment Laptop DV6820ea

Hi,
Operating System:  Windows Vista
Sound Driver :         Conextant High Definition Smart Audio 221 (SPDIF INTERFACE)
Other Programmes: I Tunes
Problem :     Sudden loss of sound, I have tried the obvious such as is the touch sensitive mute switched off and the volumes switched on . I did briefly have my i-touch connected via USB but don't remember doing anything other than connecting and disconnecting the USB cable. Then there was no sound. I have also tried via control panel testing the devices and the speaker test works correctly but other than this I am unable to get any sound from the laptop. I did find, although I can't remember where, next to a I-tunes file name yellow triangles but was unabe to delete. This will probably be a very obvious and simple solution! but I would greatly appreciate any help!    many thanks

This often occurs when you plug in an HDMI device, on my machine. Try manually setting the playback device:
Right-click the speaker icon in the taskbar.
Select Playback Devices.
Right-click the audio device you want (i.e. Speakers)
Select Set as default device.
If this does not work, try logging in with an account that has administrative access. I discovered the wireless network can not be enabled by a non-administrative account, when it is disabled while logged in as an administrator. You have to go back to the admin account, enable wireless, and then log back to the other account.
Avoid updating your driver, unless the device no longer functions.

Loss of sound and video playback on ENVY X2

Every so often, more often than I would like, my HP Envy X2 loses sound and video playback capabilities; any ideas anybody? The concept of this machine is great and have had it for the past 9 months but this loss of sound and vision is so unpredictable and frustating...

Hi Brumage,
I saw your post regarding the sound and video issues and I will be happy to help. Do you get any error messages when this happens? Have noticed if it is a particular site like YouTube or program that you are using when the issue occurs or does it occur on all programs? When you restarted the Envy X2 does the issue go away?
I would start by suggesting that you make sure all updates have been installed through HP Support Assistant and Windows Update.
What operating system are you running? What is your product number?
Find your product number on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Vist Basic & XFI, random loss of sound and World of Warcraft Hardware enabling iss

Hello.. First off want to say that prior to reinstalling Vista last week, I had no had any issues with my XFI and Vista.. Since the re-install, while running World of Warcraft and Ventrillo, I get random loss of sound. And by that, specifically I mean, the sound shuts off, and I get a constant loud hiss noise that does not stop until a reboot is performed. If I just run WoW and no Ventrillo, I dont get the random problem and the sound runs fine. It is however a highly annoying issue that requires too many reboots in evening. Getting to the point of just trying the onboard sound, which I'd certainly rather not do.
Additionally there is an option in WoW that allows for Hardware enabling, which is supposed to improve performance. When I check this box and restart the game, the box is still not checked. Not sure if this is a CL problem, but something is wrong for sure! I'm using the latest drivers that are on creativelabs.com for my Vista 32 bit system. And again, didnt have these issues prior to the fresh re-install of Vista. Before that I had stepped up the drivers all the way from Vista. Thanks for any feedback on this.

Not sure why your sound is cutting out... but as for WoW, it needs ALchemy installed to run with hardware audio enabled under Vista. I dont believe its in the list of titles included with ALchemy just yet, but adding it manually with the default options works just fine. Without doing this I believe the new sound core used in WoW will automatically detect that it cannot do hardware audio and simply uncheck the box whenever you try, where-as before it would work but still give you Software rendered sound (only instead of WoWs audio engine doing it, it was Vistas - not exactly an improvement). Incidentally, this not only improves performance but vastly improves the sound quality - especially when excessive numbers of sounds are being played. (eg Mass AoE effects on larger numbers of mobs, such as two Warlocks Hellfiring along with a Hurricane and Consecration while pulling the Ballroom - 9 mobs per group - near Moroes in Karazhan) Its possible doing this may also correct your cut-out issue, but its possible it wont. Ive been running WoW alongside Vent for months now under Vista w/ALchemy and an X-Fi and never had such a problem, but then I do also run Vent off the onboard audio so I can use a small earpiece and have voices clearly audible through game sound.

Cinnamon Desktop Sound Settings Window Sizing Issue

This is not a big issue, but it should also be an easy fix.
I've noticed for months that when I enter the sound menu from the Sound Settings option on the panel the Sound Settings window is not quite wide enough and so a scroll bar appears at the bottom of the window. This blocks some of the balance, fade, and subwoofer slider area. If I enter the sound settings from the Control Panel, the window scales appropriately.
If anyone knows a more appropriate place to post this bug report, please let me know.

Your symptoms sound similar to the subject of this document, concerning "Terminal.app" requiring Apple's Monaco font to be enabled:
http://docs.info.apple.com/article.html?artnum=25730

No sound on Windows 7 Boot Camp

I've had this problem for a while now, I just ignored it in the past, now I'm really fed up. I've tried everything, downloading Realteck, burning BootCamp drivers onto the CD (I have a Lion which came with no disc), I tried playing around with the Sound in Control Pannel. Someone please help me!

Then google for Cirrus Logic Audio for Mac running Windows.
Something like this...
MacBook Pro audio sound fix
http://realitypod.com/2010/07/macbook-pro-no-sound-in-windows-7-final-fix/
Cirrus Logic CS4206A (AB 11)
I tried downloading the "High Definition Codecs" driver from Cirrus Logic's website but the download link doesn't work.
http://www.cirrus.com/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207WinVista_Win7_32-64-bit6-6001-1-30.zip
*MacBook Pro No Sound in Windows 7*
Posted by Geek on +Jul 23rd, 2010+
* You are running Vista or Windows 7 on a Macbook
* You have no or low audio/ sound. In macbook pro, you may also see a red light in your audio jack.
*Step 1:* Download the Macbook Pro Cirrus Logic CS4206A Driver from our server.
+(As a request, please do not hotlink this file anywhere else or our server will automatically remove the file from server.)+
+In case the above download link does not work google+ CirrusAudio.10.6.1.zip
*Step 2:* Extract the right type of Driver
(depending on your windows XP/ 7/ 32 bit/ 64bit)
Step3: for Windows 7 only: Right Click on exe file of driver.
Select Properties> Compatibility > run in compatibility mode
Select Windows Vista from drop down menu and Click OK
*Step 4:* Double click the driver and install.

Windows 10 Error code: 0x80070570 at 68% "windows cannot install required files"

Trying to do a clean install from a USB flash drive and DVD. Same error each time at same location. (68%) I have removed all USB devices, Ran chkdsk and updated firmware on SSD.
Asus Sabertooth P67 BIOS 3602
i7-2600k 3.4GHz
24GB ram DDR3
500G SSD OCZ Vortex Sata 3
"Windows cannot install required files. The file may be corrupt or missing. Make Sure all files required for installation are available, and restart the installation.
Error code: 0x80070570"

Hi Covered,
Glad that you have resolved this issue.
Have a nice day!
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

'Windows cannot install required files' error while installing Vista SP1

I'm installing Vista Client SP1 on my Macbook pro and getting the following error:
Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
Almost exactly as described in this KB article: http://support.microsoft.com/kb/930984/ except my error code is 0x80070017. I'm double-checked CRC on my dvd to ensure it's not corrupt. Also I've previously successfully installed Vista SP1 from the SAME DVD on a different Mac Leopard (desktop)
Any ideas? This is a new Macbook pro, just got it yesterday. Could be DVD drive issue?
Thanks!

Did you get far enough to delete the FAT partition BootCamp created, so you could create a new NTFS one?
http://support.microsoft.com/kb/933925
or this:
http://discussions.apple.com/thread.jspa?threadID=1464025&tstart=0

Start Navigation sound in Windows 7 64 bit dissappeared

? [size="">I have been scratching my head over this one.
[size="">After doing a clean install of Windows 7 64 bit on a new build this week, and installing a new X-Fi PCIe Titanium Fatality Pro, I found the start navigation windows sound was no longer there - I am talking about the brief sound you hear, that sounds like a click, when you click a link, double click a folder to open , etc. I could find the sound in windows sounds, but when I pressed test I could not hear it.
[size="">
[size="">After much trial and error, I discovered that I had to disable sound blaster enhancements, in the properties tab for speakers in the sound card settings. I now have that windows sound back.
[size="">When I enable sound blaster enhancements, it goes away, when I disable them, it is back to normal.
[size="">
[size="">Is this normal or unique to me?

Wow, that fixed? my problem also by disabling soundblaster enhancements. How were you able to figure that one out? I was trying to figure it'sout also many months ago when I first got windows 7 beta and couldn't do it. Anyway,
Seems like most people don't like this start navigation sound, but I do.
I don't like the fact of having to disable soundblaster enhancements also.
Have you noticed that if you change the windows theme to something else it will actually work?

HT2480 I have a new windows 8 laptop required at work and want to sync my iphone 5 contacts, calendar, etc with OUtlook. How?

I have a new windows 8 laptop required at work and want to sync my iphone 5 with outlook. We do not have an exchange network

Have a look at this: http://support.apple.com/kb/DL1455

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

Loss Of Sound Sync - FC7

Hi Gang
Working with FC7 in Snow Leopard 10.6.8 and an older Mac Pro.
Exported a 70 minute clip and noticed loss of Sound Sync, (about mid way thru in a QT File). The clip is a mixture of assorted clips.
Divided the 70 minute clip into 3 separate exported clips which produced proper 'Synced Sound' in each clip.
This problem used to occasionally happen in FC6 - Does anyone know a fix or work-around?
Thank You
Mike

"You've been in these forums long enough to know that FCP doesn't work well with non-FCP media"
Shane - I don't appreciate your constant negative replies - do me a big favor, and avoid responding to any more of my posts.
Yes, I've been here long enough to know you've always had a condescending attitude ....
Your approach is NOT helpful. Its rude and disrespectful ....

Loss of sound (Hard-reset and restore does not work)

Hi,
I loss all sounds on my iPad 2 (currently on iOS 7.04). This is the 2nd time I have had this issue (had it with an earlier iPad) and had to replace the previous one (out of warranty period). Very frustrating as it is about the same time period after purchase. Last time, it seemed like a repeated fault with the iPad and I cannot believe I have the same issue again on a different product. It is an expensive way of having to re-buy every couple of years for no other reason.
It did not happen immediately after an update i.e. it does not appear to be "update" or iOS version-related.
Anyone got any advice please? The facts are as follows (and what I have tried).
When it happened?
I was in iMovie editing a movie when all sound went from the speaker. It continued to work with earphones plugged in, but this is now intermittent. I have no sound on the speaker at all except for when I click sounds on the menu and change the level of ringer alert (which works on the speakers). This seems to tell me that it is a software problem. I have no sound on any applications or internet video or music from iTunes. I cannot survive on the earphones as they only work for a period of time and then they fail (until I take the jack out again when it works again for a period of time before the headphones fail again).
What have I tried?
a) Numerous hard resets
b) changing the side switch's position
c) changing in general settings the side switch settings from lock rotation to mute and back again (repeatedly and in reverse to see if it makes any difference)
d) resetting all settings - this made no difference
e) erase all content and settings - interestingly at the stage when it asked me if I wanted to restore from an iCloud account, it was making sounds (the keyboard clicks - which don't make a sound irrespective of the click setting currently) i.e. appeared to have resolved the issue and as soon as I restored my iCloud back-up, the sound went again.
I would be grateful for any suggestions. This post also includes a recommendation to Apple on improving its product (relating to iCloud backups) as the ultimate solution should not be paying for a replacement for a software issue (to avoid losing all my data permanently).
My musings are that:
a) it is definitively a software issue (on account that the speakers work in certain situations only)
b) it appears to be that the software is corrupted in my iCloud back up
c) it is an issue that happens regularly and is an avoidable issue/cost to Apple's customers that needs to receive higher priority in being addressed as it is built in redundancy for a significant proportion of customers. At the very least, iCloud backups should be capable of being restored in part - is there any way this could be done so we don't lose all of our notes, media etc if the final advice is to "start again". How can it be right to lose all content because of an Apple system software issue? I am pre-guessing this will be the final advice (if I don't want to pay for a replacement iPad)?
Please help me and all those others with the same avoidable software problem.
Thank you,
Peter

This is an iPad user to user forum, so you are not addressing Apple.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Errors "A media driver your computer needs is missing." or "Windows cannot install required files" upon attempting to install Windows 10 TP build 10041 64-bit

I'm attempting to install Windows 10 TP build 10041 [64-bit]
I am currently being prevented from installing by a "A media driver your computer needs is missing." error, which occurs fairly early in the process. I've interpreted further text in the message as a suggestion that it's a DVD, USB or some other
similar driver issue. However, as I've been able to attempt each install through booting from DVD and USB, I'm not convinced this is the issue.
I'm currently installing to a 128Gb SSD drive. I have installed Windows 10 TP on my laptop's SSD with no issues.
On a few occasions the installation has continue with the installation, and then failed at about 6% with the following error:
"Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code 0x8007045D". I have not removed the installation USB or DVD.
I did not have this issue when installing build 9841, so am currently assuming this is an issue with build 10041.
Apologies if this query has been posed before, a search did not show up this issue.
Any advice would be greatly appreciated.

Hi Michael,
Thanks for trying to assist!
I attempted removing/deleting partitions and formatting the SSD as part of the install process. I have also tried installing via USB and DVD with the same issues.
As part of the troubleshooting, I attempted to install a different OS. I was able to successfully install Linux Mint 17.1 with no issues. This further solidifies my impression this is an issue with Windows.
I will try a different USB port, appreciate the suggestion, didn't think it would make a different given the various methods already attempted.

Loss of sound in Windows XP in - requiring drivers to be re-loaded

Similar Messages

Maybe you are looking for