Loss of wireless connection with 350n

I am having a terrible time with loss of connection with my 350 N wireless router. The router itself is on top of a bookshelf less than 50 feet away from both of my wireless desktops, and faces straight down the hallway that both rooms the computers are in open from. Often when I start up my computer it refuses to acknowledge that there is a wireless network present in the house and the only way I can make it detect it is if I powercyle the router--which is a pain. Even sitting directly next to the router it will never recognize better than 85% signal strength. And when I load (not play, just initiate loading) download-heavy content such as streaming video or an MMORPG program the connection will often drop and then reconnect seconds later. Upon performing a speed test it unfailingly indicates that my upstream is twice as fast as my downstream, which reads at only around 1165 Mbps--which is absurd as my modem is provisioned for and often surpasses 16000Mbps. What on earth is going on and what can I do to overcome it? I'm getting desperate here.

I have fixed my problem by upgrading the router firmware to version 1.03.7 from version 1.03.5.
The issue I had upgrading the router was it would fail at about 80% when using the router to do the upgrade soooooo, this is how I did it ( stolen from another thread )
Be warned! If you do the below and you have custom setting on the router you need to write those setting down first!!!!!!
1. Download tftp.exe using this link (ftp://ftp.linksys.com/pub/network/tftp.exe)
2. Download the new firmware (version 1.03.7) at Linksys download site
3. Reset your router by pushing and holding the reset button in the rear for 30sec
4. Configure a static IP address (192.168.1.50 with Subnet Mask 255.255.255.0) on YOUR PC
5. Connect a network cable from your PC to your router
6. Test that your PC is talking to the router by openning a DOS window and type "ping 192.168.1.1" (without the paranthesis) and you should get 3 replies.
7. Double click on the tftp.exe
8. Type in the IP Address for the Server: 192.168.1.1
9. Password is "password" (WITHOUT the paranthesis)
10. For the BIN file, click on the square-button and browse to the BIN file that you've downloaded from the LinkSys Site (WRT350N_1.03.7_US_code.bin)
11. Click on Upgrade
12. After the upgrade is successful, perform the reset, again. IMPORTANT!!!! PUSH AND HOLD THE RESET BUTTON FOR 30sec then let go.
13. POWER light should be blinking during boot up then stay SOLID
14. Now, change YOUR PC IP seeting back to what they were before you started this process.
15. Start InternetExploder and surf the net
16. GOODLUCK!!!
As soon as I did this, my laptop wireless started working 100% and right away.

Similar Messages

New itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari HELP

new itouch user here, We had a wireless connection with a password all set up but we couldn't remember the password meanwhile there are other connections around us but locked. So i decided to make a new one yet it still will not allow to go on safari after i type in the password PLEASE HELP ive turned on and off etc

My guess is that the security settings on your router and iPod do not match.
For a test, change your router so there is no security. See if you can connect and get to the Internet. If that works, set up the router with security and use the same settings for the iPod.

Lost wireless connection with mx860

i lost my wireless connection with my mx860 - please help, i have tried it all
thank you

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

HT1515 I've lost my wireless connection with light flashing amber, I've unplugged router and modem and pressed reset button on airport extreme

Any suggestions on retreiving wireless connection with airport extreme, have unlugged power to all sources and pressed reset button on router, still amber flashing light

Hello ebulloc,
It sounds like you are getting the flashing amber colored light and cannot connect to the internet with it. According to this article:
AirPort base stations: About AirPort base station status lights (LED)
http://support.apple.com/kb/ht4600
Flashing amber
Startup is complete, but the Wi-Fi base station has detected a condition that requires your assistance. To resolve flashing amber status light conditions click here to learn more. Launch AirPort Utility to find out what conditions are being reported.
This article should lead you to a resolution:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/TS1589
Thank you for using Apple Support Communities.
Take care,
Sterling

Zyxel pk500z router/wireless modem loses wireless connectivity with imac

My iMac loses wireless connectivity with wirelss internet from my Qwest ZyXel PK5000Z modem/router intermittently. Have to constantly reboot the router to allow my Imac and other Mac notebooks nto reconnect to wireless internet connection.

Suggest that you take one or more of Mac laptops down to the coffee place and connect there to check your performance. If you get a good connection there....as I suspect you will...you know the Macs are functioning correctly.
If the Macs perform well at the coffee place, you need to contact the ZyXel support folks for ideas on why the PK5000Z device is requiring constant restarts.
As you might imagine....on an Apple support forum, we are not going to be able to provide much help with a ZyXel product.

Lost wireless connection with Lexmark Printer

MBPro with 10.8.1. Lost my wireless connection with X6675 Lexmark printer. How do I reestablish the connection. My router is a Time Machine.

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

Using gigabit connections with 350N

I have been experiencing some problems with my 350N recently. I've upgraded to the latest version when it was released(1.03.2) and it's been ok.
Recently I've had a problem getting onto the internet. I've isolated the problem to be the router when I bypassed router to the PC directly. I can get IP address but I cannot get onto the internet. The wireless clients show the same problem.
Only thing that has changed is this. I've put one PC on the network at gig speeds. Are there a certain port(s) that I can use? It works with the gig for a while and then stops. I suspect this is the problem but I haven't done extensive troubleshooting. It's very frustrating!!!
Any pointers would be appreciated!!!

i have same problem as steinhouse10874. after I download lastest ver firmware and installed it. My pc cannot obtain ip from router and occur limitation connective. I havn't using wireless connect to router so limitation connective occur is let me feel strange. I reset router, then I can obtain ip form reuter and can connet to internet. But some strange things occur, I just open port 80 from router, but I discover FTP port 21 have been opened too. I check router setting , I havn't open FTP port 21. FTP server just for my VPN only, but now it stand at internet too. after it , i check other port pop3 or smtp3 for SSL , it is automatic opened to. I havn't opened it both in router. I have 3 pcs at my home , now every pcs like DMZ standing in internet. pls let me know anyone have those case, and have any slove solution. linksys it the biggest and famous in the world, pls check it and solve as soon as possible , thanks much!

Detect loss of wireless connection

GOAL : physicians in a hospital getting access to web-based JSP content through a Pocket PC browser(IE) and wireless connectivity. We already have the "normal-size" JSP pages for desktop computers and we'd like just to provide a reduced version of theses pages to browse on a PDA.
PROBLEM : Even with a well designed WLAN with good access point placement, you may experience connection loss. And it's a problem when browsing JSP pages : imagine submitting a form when you're suddenly offline : you'll get a 404 or something similar -> not serious.
QUESTION : If I port our application in the Personal Profile Xlet framework, Would it be possible to detect connection loss in an Xlet or somewhat... then it could set the rest of the app to work in a kind of degraded mode. How can we manage that ?

You could have a thread which is dedicated to managing the apparent connectivity. It connects to a well known location, if it cannot connect then you are assumed to be disconnected and the application should downgrade. The routines that handle networking should be able to fail gracefully and not generate exceptions which would terminate the program. As an example you can update your stocks whenever theres a connection but if there isn't one you can always show the value and the last time it was successfully retrieved.

Losing wireless connection with Time Capsule

Hi,
Yesterday I purchased a 500GB Dual Band/Guest Networking Time Capsule (the newest model). The TC set up properly - I have it set up to join my wireless network and share my external HD - but during backups or streaming media from the external HD, it loses the wireless connection and stops. At this point, the TC is no longer viewable in the AirPort Utility and I have to reboot it.
I've read other articles and threads stating that downgrading to the 7.3.2 firmware version will correct problems like this, but because mine is a newer TC version, I can't do this (7.4.0 is the earliest available). Is there any way to solve the constant wireless connection loss?

Leask, welcome to the discussions!
The problems that you are experiencing are likely a combination of signal strength and interference from other networks and possibly cordless phones. You will need to experiment to find the best settings for your environment as there are no set rules or fixes for any given situation.
Assuming that security settings are compatible within a network, good wireless performance depends on two main factors: adequate signal strength and lack of interference from outside sources and other networks.
Download iStumbler, www.istumbler.net, to get a look at your wireless network. The application will show you the signal strength of your network (and noise).
If you have a laptop, move around your house to see how the signal strength at various points changes. If you find an area where the signal strength really starts to fall off rapidly, you either need to move your device closer to the broadcast point or consider purchasing an AirPort Express to "extend" the broadcast power of the Time Capsule.
The signal strength indicator on your computer(s) or iPhone is generally not a very good indicator of the actual signal strength on your network.
Perhaps more importantly, see if there are other networks in your area and identify what channels they are operating on. This is a primary source of interference in addition to cordless phones, microwave ovens, and some security cameras.
If you find that there are other networks using the same channel or an adjacent channel as your network, use AirPort Utility to change the channel that Time Capsule is broadcasting on to another channel that is as far away from other channels as possible. This may be very difficult if you live in an area crowded with other networks.
There are also features on many new wireless routers that enable a user to "hide" the network name, so it is possible that there are other wireless networks causing interference that you cannot identify.
Your Time Capsule is capable of broadcasting a wireless signal at 5GHz, much higher than the normal crowded 2.4GHz networks. But, I'm not sure if your computer(s) are compatible with this setting. Wouldn't hurt to give this a try. A number of users have found that they have much less difficulty on the higher band since it is (for now) much less crowded.
Please post back on your progress.

How can I resolve the issues connecting to my wireless connection with my Apple tv?

Ive had my Apple tv for about a month now & I still have not even used it for what I actually got it for. It allows me to use the airplay feature with my ipad2. But when I try to use the home sharing feature it never connects with my apple ID. At first I thought that maybe I'm just typing it the wrong way, but then I used the same ID and password to purchase an app on my iphone & it works. It's not my wireless connection because multiple devices connect to it just fine, without any issues. I tried reseting it, that obviously didnt work. I really just dont know what else to do.

you can't rely on airplay mirror some apps support the old in app airtune audio only option if the video app in question does you can do it from the apps settings somehow
if not then you need a airport express which does pretty much what airplay mirror on the Apple TV does but it's a audio only

Problem with connetction to wrt54g2 via wireless connection with WPA/WPA2 & wireless MAC filter

Hello,
I'm Alexey from Novosibirsk, Russia.
I have a problem with connection to wrt54g2 from my DELL D630 notebook via wireless connection. When I setup WPA/WPA2 in wireless security and wireless MAC filter I can't connect from notebook to WRT - in Windows I see that dynamic IP address from WRT is not assigned. When I switch off security mode to disable always OK, but I need a wireless security between DELL and WRT.
Connection via cable Ethernet port is OK.
Can You help me?

Have you tried the different laptop...?
Download 1.71 MB the firmware for WRT54G2 v1 and reflash the router's firmware.After reflashing/upgrading the router's firmware,reset the router for 30 seconds and reconfigure the router from scratch.

[SOLVED] No wireless connection with linux-3.2.2-1

After upgrading to linux-3.2.2-1, my wireless connection stopped working. It "connects", but I can't get an IP address through dhcp. Assigning an IP manually doesn't do the trick, I can't even reach the router through ping.
Downgrading to 3.2.1-2 fixes the issue.
I suspect this may be a regression but I couldn't find any information or reports of other people having the same problem anywhere.
I should note that I can establish a working connection when running the new kernel by using an external USB wireless device, so this probably has to do with the modules/drivers of my network card (?).
This is the ouput of some commands when running the new kernel (wlan1 is the device mentioned avobe):
$ ifconfig -a
eth0: flags=4098<BROADCAST,MULTICAST> mtu 1500 metric 1
ether 40:61:86:18:60:2d txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 43 base 0x2000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 metric 1
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 22 bytes 1420 (1.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 22 bytes 1420 (1.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
ether 1c:4b:d6:5c:47:dd txqueuelen 1000 (Ethernet)
RX packets 59 bytes 18759 (18.3 KiB)
RX errors 0 dropped 4 overruns 0 frame 0
TX packets 3 bytes 1161 (1.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
ether d8:5d:4c:8f:49:43 txqueuelen 1000 (Ethernet)
RX packets 449 bytes 144928 (141.5 KiB)
RX errors 0 dropped 8 overruns 0 frame 0
TX packets 9 bytes 1551 (1.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
05:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
$ lsmod
Module Size Used by
uvcvideo 64311 0
videodev 82101 1 uvcvideo
ath9k_htc 56902 0
v4l2_compat_ioctl32 8316 1 videodev
media 10597 2 videodev,uvcvideo
arc4 1410 4
ath9k 87343 0
ath9k_common 2096 2 ath9k,ath9k_htc
ath9k_hw 347282 3 ath9k_common,ath9k,ath9k_htc
ath 14802 4 ath9k_hw,ath9k_common,ath9k,ath9k_htc
mac80211 228367 2 ath9k,ath9k_htc
joydev 9895 0
cfg80211 172260 4 mac80211,ath,ath9k,ath9k_htc
rfkill 15498 1 cfg80211
i2c_i801 8187 0
snd_hda_codec_hdmi 24121 1
snd_hda_codec_realtek 194997 1
snd_hda_intel 23343 0
snd_hda_codec 89160 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
snd_hwdep 6389 1 snd_hda_codec
snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
snd_timer 19544 1 snd_pcm
r8169 49040 0
iTCO_wdt 11885 0
snd 59214 7 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
mii 4059 1 r8169
fan 2426 0
processor 25582 0
battery 6453 0
thermal 7799 0
ac 2344 0
evdev 9530 4
mei 32414 0
intel_ips 11213 0
wmi 8475 0
iTCO_vendor_support 1961 1 iTCO_wdt
psmouse 61311 0
pcspkr 1819 0
serio_raw 4429 0
soundcore 6210 1 snd
vboxnetflt 17159 0
vboxdrv 1790690 1 vboxnetflt
ext4 417116 1
crc16 1359 1 ext4
jbd2 71243 1 ext4
mbcache 5881 1 ext4
usb_storage 44519 2
sr_mod 14951 0
cdrom 36681 1 sr_mod
sd_mod 28307 3
ahci 20037 0
libahci 19559 1 ahci
libata 166654 2 libahci,ahci
scsi_mod 133443 4 libata,sd_mod,sr_mod,usb_storage
ehci_hcd 40698 0
usbcore 146241 5 ehci_hcd,usb_storage,ath9k_htc,uvcvideo
usb_common 954 1 usbcore
i915 418631 7
video 11164 1 i915
button 4470 1 i915
i2c_algo_bit 5263 1 i915
drm_kms_helper 26137 1 i915
drm 188362 3 drm_kms_helper,i915
i2c_core 20492 6 drm,drm_kms_helper,i2c_algo_bit,i915,i2c_i801,videodev
intel_agp 10904 1 i915
intel_gtt 14519 3 intel_agp,i915
Thanks in advance.
Last edited by Ideka (2012-02-02 21:23:38)

Ideka wrote:I suspect this may be a regression but I couldn't find any information or reports of other people having the same problem anywhere.
You must not have searched very long then, because you've missed not one, but two threads:
https://bbs.archlinux.org/viewtopic.php?id=134374
https://bbs.archlinux.org/viewtopic.php?id=134580

Unable to access wireless connection with linksys rooter WRT54GS

Hi,
I just installed a wireless rooter Linksys WRT54GS on my connection, The problem I have is being able to access it with my wireless on my laptop.
I kept getting a message stating "connection unindentified" "access limited". I've done most of what is already suggested on your forum such has turning the power off of my rooter, my modem and such and still nothing. I'm able to access the wireless with my girlfriend Mac Notebook, my playstation 3 and my desktop computer which uses Windows X. First I thought that it my be a problem with my security but even when the connection is unprotected I still get that error. I try to disable the IpV6but that didn'tdo anything either.
My laptop is a Toshiba Qosmio X300 PQX32C-033019 with Vista and my rooter is a Linksys WRT54GS vers. 6
Here's my connection log, sorry if it's in French:
Informations sur l'ordinateur
Vendor:TOSHIBA
Machine Name:Qosmio X300
VersionQX32C-033019
CPU Maker:GenuineIntel
CPU Name:Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
CPU Clock:2267
CPU Base Clock:2267
OS:Microsoft® Windows Vista™ Édition Familiale Premium
OS Build:6001
OS SPervice Pack 1
Ram:4188120
Début de la page
Informations IP
ipconfig /all
Configuration IP de Windows
Nom de l'h“te . . . . . . . . . . : PC-de-ThomasMur
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Mixte
Routage IP activ‚ . . . . . . . . : Non
Proxy WINS activ‚ . . . . . . . . : Non
Liste de recherche du suffixe DNS.: phub.net.cable.rogers.com
Carte r‚seau sans fil Connexion r‚seau sans filÿ:
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Intel(R) Wireless WiFi Link 5100
Adresse physique . . . . . . . . . . . : 00-21-5D-3D-9C-08
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::a9d9:4618:2ae4:d7e5%11(pr‚f‚r‚)
Adresse d'autoconfiguration IPv4 . . . : 169.254.215.229(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.0.0
Passerelle par d‚faut. . . .ÿ. . . . . :
Serveurs DNS. . . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Ethernet Connexion au r‚seau local :
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Adresse physique . . . . . . . . . . . : 00-1E-EC-3F-7B-CF
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::4da:b21b:843c:7bfd%10(pr‚f‚r‚)
Adresse IPv4. . . . . . . . . . . : 192.168.1.100(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.255.0
Bail obtenu. . . . . . . . .ÿ. . . . . : 8 juin 2009 18:11:58
Bail expirant. . . . . . . . .ÿ. . . . : 9 juin 2009 18:11:58
Passerelle par d‚faut. . . .ÿ. . . . . : 192.168.1.1
Serveur DHCP . . . . . . . . . . . . . : 192.168.1.1
Serveurs DNS. . . . . . . . . . . . . : 64.71.255.198
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Tunnel Connexion au r‚seau local* :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : isatap.phub.net.cable.rogers.com
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Carte Tunnel Connexion au r‚seau local* 6 :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Carte Microsoft ISATAP #2
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Début de la page Informations de routage
route print
===========================================================================
Liste d'Interfaces
11 ...00 21 5d 3d 9c 08 ...... Intel(R) Wireless WiFi Link 5100
10 ...00 1e ec 3f 7b cf ...... Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
1 ........................... Software Loopback Interface 1
13 ...00 00 00 00 00 00 00 e0 isatap.phub.net.cable.rogers.com
12 ...00 00 00 00 00 00 00 e0 Carte Microsoft ISATAP #2
===========================================================================
IPv4 Table de routage
===========================================================================
Itin‚raires actifsÿ:
Destination r‚seau Masque r‚seau Adr. passerelle Adr. interface M‚trique
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.215.229 281
169.254.215.229 255.255.255.255 On-link 169.254.215.229 281
169.254.255.255 255.255.255.255 On-link 169.254.215.229 281
192.168.1.0 255.255.255.0 On-link 192.168.1.100 276
192.168.1.100 255.255.255.255 On-link 192.168.1.100 276
192.168.1.255 255.255.255.255 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 169.254.215.229 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.100 276
255.255.255.255 255.255.255.255 On-link 169.254.215.229 281
===========================================================================
Itin‚raires persistantsÿ:
Aucun
IPv6 Table de routage
===========================================================================
Itin‚raires actifsÿ:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
10 276 fe80::/64 On-link
11 281 fe80::/64 On-link
10 276 fe80::4da:b21b:843c:7bfd/128
On-link
11 281 fe80::a9d9:4618:2ae4:d7e5/128
On-link
1 306 ff00::/8 On-link
10 276 ff00::/8 On-link
11 281 ff00::/8 On-link
===========================================================================
Itin‚raires persistantsÿ:
Aucun
Début de la page Informations de protocole
Protocol Bind Information
SSTP based VPN
Microsoft TCP/IP version 6 - Tunnels
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Internet Protocol (TCP/IP) - Tunnels
Microsoft NetbiosSmb
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IP ARP Driver
Miniport WAN (IP)
Message-oriented TCP/IP Protocol (SMB session)
WINS Client(TCP/IP) Protocol
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IPv6 ARP Driver
Miniport réseau étendu WAN (IPv6)
Point to Point Protocol Over Ethernet
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Point to Point Tunneling Protocol
Layer 2 Tunneling Protocol
Remote Access NDIS WAN Driver
WAN Miniport (SSTP)
Carte asynchrone RAS
Miniport WAN (PPPOE)
Miniport réseau étendu WAN (PPTP)
Miniport réseau étendu WAN (L2TP)
Link-Layer Topology Discovery Mapper I/O Driver
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Link-Layer Topology Discovery Responder
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
NDIS Usermode I/O Protocol
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Début de la page Informations sur les équipements
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Device ID : PCI\VEN_10EC&DEV_8168&SUBSYS_FF001179&REV_02\4&492937F&0&00E2
Status : Enable
Driver Vender : Realtek
Driver Version : 6.205.403.2008
Driver Date : 4-3-2008
Intel(R) Wireless WiFi Link 5100
Device ID : PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00\4&3905AE0C&0&00E3
Status : Enable
Driver Vender : Intel
Driver Version : 12.0.0.73
Driver Date : 4-27-2008
Bluetooth
Device ID : ACPI\TOS6205\5&F592293&0
Status : Disable
Bluetooth Version : v6.10.07.2(T)
Début de la page Statut du commutateur de communications sans fil et de la touche d'accès direct pour réseau sans fil
Wireless Communication Switch : On
Wireless Hotkey (Fn + F8)
Wireless LAN : On
Solved!
Go to Solution.

Try this -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
On your Vista Laptop, first disable the Wireless Network Connection and restart the Laptop, then Enable the Wireless Connection...
Then Click on Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Network and click on Add, select Manually Create a Network Profile and click Next, enter your Network SSID/Network Name, select WEP for Security type and enter your 10 digit Network Key and click on Next, it should say "Successfully Connected to ____" close all the Windows and restart the Laptop, now see if you can connect to Internet Wirelessly...

TC & MBP - complete loss of wireless connection and usage

I apologise in advance if this is a very long winded post! I've been an Apple fan for some 20 years now and it's only in the last three months that my love affair is starting to wane due to (what seems to me) poor hardware releases.
My setup:
1 x PowerBook G4 1.25Ghz with Edimax 802.11n PC Card
1 x MBP 2.4Ghz (purchased April 2008) with AirPort 802.11n
1 x Time Capsule 500Gb
1 x Airport Extreme Base Station Gigabit Ethernet edition
1 x Netgear DG384 v2 (wired only) modem router
1 x standard ADSL connection (8Mbps) from a UK ISP (and yes, 8Mb is about the norm for the UK! Though in reality, it means closer to 4Mb...)
The Netgear router is connected to the ADSL line and is set up as the DHCP server for the network. I have a Fixed IP address from my ISP. The Time Capsule is connected via ethernet to the Netgear router. The TC is set up in Bridge mode as the router serves DHCP. The TC is wall mounted via the excellent AirMount from H-Squared.
The TC has been through a myriad of configurations in an attempt to create a stable wireless environment since its purchase in April. Prior to my recent holiday (two weeks in Greece - hurrah!), the current configuration was solid for both Macs.
The config is: Bridge mode; 2.4Ghz N Only wireless; WPA2 secured; no MAC address access control restrictions (so pretty straightforward). The TC is running firmware 7.3.1. It is setup as "Create a Wireless Network"
Both Macs are running OS X 10.5.3 with all of the latest updates including AirPort Utility 5.3.2.
It took me about six weeks to hit upon this config for the TC having had many wireless drop outs, stalled connections, lost internet connections (ie. I could access the TC HDD but could not access the internet using the same wireless connection). So much frustration in the early days - I tried many of the solutions on this forum but to no avail until I hit upon the 2.4Ghz N Only route which seemed to be the answer to all my problems.
Prior to leaving on holiday, I unplugged all of the equipment in the room including the TC and the router. When I returned, I restarted everything in a logical sequence - router first (and waited for a connection), then the TC and then the Macs.
From this point on the problems have started. The PB G4 with the wireless card has a more or less stable connection. The wireless card connects immediately to the TC but then it takes approximately 30-60 seconds for an internet connection to work (so I see a lot of the Not connected to the internet messages in Safari). It seems to immediately get an IP address from the router via the TC but then the internet connection itself takes a while to come up.
The MPB on the other hand is a nightmare. Since returning from holiday I have not been able to get a workable wireless connection at all. In no particular order, the problems that the MBP exhibits are as follows (these can occur at the same time or individually):
i) only returns a self-assigned IP address; renewing the DHCP lease does not fix the problem
ii) does not see the network at all (although it will see others in the vicinity)
iii) cannot connect to the network - returns the Connection Timeout error or very occasionally the Password Incorrect error; I have tried connecting the network via the AirPort menu bar item, via Join another network... from the menu bar, via the Network selection menu in System Preferences > Network and even via Internet Connect - all with no success
iv) sometimes I am able to connect to the network but no IP address is received. Having checked the TC logs, it shows the same error occurring over and over again:
Jun 26 22:06:04 Severity:5 Associated with station 00:1e:c2:ba:78:6c
Jun 26 22:06:07 Severity:5 Deauthenticating with station 00:1e:c2:ba:78:6c (reserved 2).
Jun 26 22:06:07 Severity:5 Disassociated with station 00:1e:c2:ba:78:6c
The MBP connects but is immediately thrown off the network.
So to all intents and purposes, the wireless aspect of the MBP and the TC are completely useless.
When I use a wired (ethernet) connection to the TC everything is joyful. Instant IP address assignment, excellent connection speeds, no drop outs and so on. So as far as I can ascertain, the TC is working fine with the exception of the wireless/wireless security.
The AEBSn that is connected to the same network no longer appears in Airport Utility.
Having read through many posts here, I have tried many solutions including:
- downgrading the FW to 7.3; no difference at all
- turning off wireless security; no difference at all
- changing channels; I've tried 1, 6, 9, 11 and 13 with no difference at all
- changing the wireless mode; B/G, G only, N only all make no difference (I can't use 5Ghz N only as the PB G4 does not support this and I need both Macs wirelessly connected)
- rebooting the TC (both via Airport Utility and 'power off'); makes no difference
- reinstalled OS X 10.5.1 (via the install disks that came with the MBP) using the Archive & Install feature; then used the Combo updater to upgrade directly to 10.5.3; once again, no difference.
I have not yet done a hard reset as this has made no difference in the past but obviously I will try it.
In other words, HELP!
I am stymied. I have tried so many solutions offered on here and on the likes of MacFixIt and other Mac forums none of which have brought back my wireless connection for the MBP.
The MBP works very well with other wireless connection. For example, at work, we have a Linksys WRT54G wireless router connected to a BT leased line. I have not had a single connection issue for three months with this setup. Similarly, whilst on holiday, I used many different hot spots and had no issues with the wireless connection. All of this evidence leads me to suspect that the MBP is not the issue.
From what I can tell, the problem seems to be in the wireless security on the TC. It seems to prevent access by MBP (though not the PB G4 using a wireless card) but disabling security did not change the error messages shown in the log or the lack of connectivity.
It is a real shame that I cannot get a satisfactory working environment with the TC as the concept is great. The reality is, however, that it is unusable in its current condition and loathe as I am to try and return it or replace it, I am rapidly coming the conclusion I will have to.
Before I do, however, I am hoping that the genii who exist on these forums may be able to proffer some ideas or solutions that I haven't yet tried.
My sincere thanks will go to anyone who provides a solution for me. There may even be beer involved as a mark of gratitude!!
Thanks for reading and fingers crossed someone knows something special...

Smokerz: thanks for the reply and the advice. Not really in a position to set up a dual network at the moment due to the positioning of the TC and the AEBS but if I get an opportunity to try it I will.
I have temporarily given up with the TC as the router for the wireless network. I've installed a Vigor 2820n modem router (it's the only one I could find that has a Gigabit port - only one though) as well being a modem (ADSL) router. Thus far, everything seems fine - although I have had a couple of drop outs due (I think) the AirPort connection on the MBP. And interestingly, I've set up the TC as a "test" wireless network using the Vigor's internet connection and it's way more stable than with the Netgear router. So perhaps it's a combination of many factors - the poor Netgear router, the TC and the MBP AirPort connection - that was causing the issues.
I'll give 10.5.4 a go as well and see if that helps at all.
Thanks to all who read the question - if anyone else has thoughts I'd be delighted to hear them.

How to use both wired and wireless connection with static addresses

Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

Loss of wireless connection with 350n

Similar Messages

Maybe you are looking for