Lost 30 pin dock connector cap - need info as to where I can replace it

I feel I'm alone in the universe. I have lost the little white 30 pin dock connector cap for my 3G, 15 Gb iPod. Does anyone know how I can get some replacement caps? Apple does not seem to offer them as a after sale item. I have searched iLounge and found a mythical reference to a filco product called the Dock protector cap but one reference link was dead and the other put me through to a Japanese Amazon page that was unintelligible. Are there any domestic products available? A quick look at Belkin and Griffin came up empty. Please help!

here is the link to protectorz
Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

Similar Messages

How to diagnose a broken 30 pin dock connector?

Is there a "diagnostic" application to determine if my Iphone 4 — 30 pin dock connector is fully functional? BTW - all lint and dirt has been removed (delicately). This iPhone has been able to perform TV/video out and mirror display with a (still) fully functional 30 pin to VGA connector, VGA cable and VGA equipped monitors. This phone currently cannot perform the same task. Only other variable is a conflict with iOS 6.1.3.
Thanks for any help.

Hi there jsoard!
I have a website for you that can help you with some steps for troubleshooting that may help you resolve this issue. The website is an iPhone troubleshooting assistant, and can be found right here:
Apple - Support - iPhone - iPhone Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/phone/
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

You need to have xlsm where you can access the macro in numbers. this is frustrating that the idea of Numbers is to make it like Excel yet you dont have this capability. Question is, when will it happen or will it happen????

You need to have xlsm where you can access the macro in numbers. this is frustrating that the idea of Numbers is to make it like Excel yet you dont have this capability. Question is, when will it happen or will it happen????

Hi brev,
Several points here:
1. Although there is some compatibility between Numbers and Excel files, I doubt very much that "the idea of Numbers is to make it like Excel." The two applications share some similarities, but also have several differences.
2. Your Question is unanswerable in this forum. Apple does not generally reveal future development plans or schedules for its applications, and anyone with knowledge of those plans will be bound by a non-disclosure agreement.
3. "You need to" implies a feature request. If you want to request that a feature be added to a future version of Numbers, that request is better made directly to Apple, via the Feedback channel, than here, where the readers and responders are all users of the software, not developers. From the application menu (the "Numbers" menu in Numbers), choose Provide Numbers Feedback, then make your request for a feature to be added to Numbers.
Meantime, if you absolutely need the macros capabilities of MS Excel, try one of the Office clones—OpenOffice.org, LibreOffice, or NeoOffice, which may offer macro support, or use the Mac version of Excel itself.
Regards,
Barry

IPod Touch (3rd Generation) 30-Pin Dock Connector to 3.5mm

Can anyone tell me if there are any 30-Pin to 3.5 mm connector cables available for the iPod Touch - 3rd Generation? I used to have several of these that I used with my 80GB Classic (connecting my Classic to my car stereo, home stereo, portable speakers, etc.) , but none of them seem to work with the 3rd gen. touch.
Thanks!

Check out SendStation's "PocketDock" with a 3.5mm jack and mini-USB connector. This gives you line-out audio level from the 3.5mm jack, much better than the headphone output.
http://www.sendstation.com/us/products/pocketdock/lineout-miniusb.html

Unusual iPod Nano Dock Connector

My iPod Nano 4GB Black (Second Generation) appears to have an unusual dock connector on the bottom. All the accessories that seem to be available have a wide connector on them bu the connector on my iPod Nano is very small.
Does anyone know why this is please?

where did you buy the "iPod"? To know if it really is an iPod, look on the back, it should have an Apple logo. Look for a serial number. Does it have a click wheel? Do you need to use iTunes to update it? Is the headphoone port to the right of the iPod Dock connector? If you answered "no" to any of these or the "iPod" in question does not look like others, you don't have an iPod. I suppose it would be possible for someone to put iPod software on a fake, but it would be hard because the iPod updaters are no longer available and the 2nd Generation Nano just used iTunes to update it, not another program. The cable you use to connect the device should be from Apple and should be white. The wide end that plugs into the iPod is called the "30 Pin Dock Connector" and should have a small rectangle with a line through it (both grey). The USB A end (the smaller one that plugs into your computer) should have the Apple logo and the USB symbol. There should be no printing on the cord. if the iPod in question does not resemble ANY of this, it's a counterfeit.

USB Dock connector

Hi,
I recently bought a new video ipod. I lost my dock connector used to upload the videos. so i bought a new charger which is of some other company, Now I am unable to load the videos into it. I can hear only the sound but unable to see the video. Does only the apple ipod usb cable works or any company's usb cable is fine.Please respond to my query.
rajiv

"I can hear only the sound but unable to see the video."
On your iPod go to "Videos / Video Settings".
Then select "TV Out" and either set it to "off" or "ask".
Also, make sure you are accessing the video through the videos menu. If you have a video mixed in an audio playlist and you access it through that, you also won't be able to see the video.

No Audio with Dock connector?

I've connected my iPhone to a Jam box I have with a dock connector and also to my car adaptor that uses a dock connector. Neither will produce audio. I can pause the music and advance to the next song, but the only sound comes from the iPhone. I thought it was supposed to be a standard iPod connector?

Reading around on the internet and here this is not a rare problem, but many people dont seem to be having it, so our iPhones are either defective, or need some kind of software jumpstart. I've been playing with mine all day and just can't get anything to come out of the line out at all.
There is something about plugging a non-iPhone known device for playback and it is supposed to offer to turn off the phone to stop you hearing the rf noise through the speakers (while I could not hear any audio, I COULD hear the noise of it through my car stereo) so perhaps this mechanism is just confused and not letting anything happen. I dont know, but I think that if nobody has sorted it out by monday I will be making a call to apple support about it. It's definitely not working right, and it's not just with 3rd party hardware, but with it's own dock. So it's not the other stuff that is all broken, it's the phone.

IPhone and iSimple: How to default to phone kit vs dock connector?

I have a Honda and the iSimple works good. But I like to use the dock connector, but the phone defaults to dock connector and need to manually change to the phone kit to get the sound through my system. This is not safe while driving. I don't mind changing before I start driving, but if I switch from radio to the iPhone/iTunes then this happens. Any suggestions? I tried using voice commands--fail! I could not find any settings to change for preferences.

There are no settings to control which gets preference.
If the device is connecting to the vehicles head unit via Bluetooth you could turn off Bluetooth on the device and only use the iSimple device.

How to clean dock connector port on Itouch 3g?

What is the best way to clean out the dock connector port in the 3rd gen Ipod Touch? Its really dusty in there and I just wanted to clean it out. How could I do this without damaging anything?
Also, the outside speaker doesnt seem to be that loud, even on full volume. Would cleaning the dock connector port help, or is there anything I can do to make it louder?
Thanks

I'd suggest just blowing it out with a can of compressed air if it's just dust and loose debris. Don't blast the connector, particularly not if the iPod is hot; the air stream can be cold which could crack things if it hits a hot surface. If there's contamination, careful cleaning with electrical contact cleaner (available at any electronic supply dealer) and a foam swap should suffice.
Cleaning the dock connector would have no effect on the volume of the speaker. Whether there's anything else you can do I don't know assuming restarting your iPod doesn't help. But perhaps someone else will have suggestions.
Regards.

IPod Touch 4G Dock Connector

Is is possible to use the new Touch 4G dock connector with Bose Sounddock Speaker systems? I can't get it to connect to my Bose Sounddock 10 or Portable. The dock connector seems way too tight, I'm not used to having to force any iPod to get it connected. Currently, I can only connect the Touch to things using the USB cable. Is there a trick that I'm missing? Any help would be greatly appreciated. I'd hate to have to return this but if I can't use it with my speakers then back to Apple the two of them I bought go.

Hi, please help me, you seem to be the only solution for my problem in the whole internet... I am having the same issue with my brand new iPod Touch 4th gen. And as you said, I noticed that annoying ¿plastic? in the iPod's connector dock. So, how did you manage to move that piece apart of its place? I'm trying with some sort of needles, but I did not succeed. Once I move it, should I place the iPod in the dock and leave it there all night? It comes to my mind, that if i do this, its probable that then, maybe, the dock will fit with no problems. Please help me, I'm kind of desperate.
PS: Sorry if my english is a little bit rusty, im from Argentina.

HT203433 i got a free app i bought a book inside that app but now when i click on it it tells me it needs to be downloaded where do i click download for it

the app is called gojimo and it was to help me study for my GCSES i got it free but i bought a book inside it called elements now evey time i click on it. it tells me you have bought this book but it needs to be downloaded i need to find out where i can click download it is on myb iphone 5s and the book cost me £2.49

Hi, and welcome to Apple Support Communities.
Mac OS X 10.5 is not a free download. You have to buy it.
http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC
Not all iBooks are compatible with Mac OS X 10.5. Check out the system requirements here:
http://support.apple.com/kb/HT3759?viewlocale=en_US
Good luck.

I lost my serial number where I can get it again? Thanks in advance.

Hi All,
I would like to know where I can get my serial number for Fireworks because I installed on a different system and I lost the serial number. There is a number where I can call in order to get it again?
Thanks in advance.

Hi Frol,
Please go through the link below.
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Regards,
Anand

I need to find where I can download CD label print. I just got a new computer.

I just bought a new computer and have used CD Label print for years but I can't find it on the Canon website. I could go to some of those 3rd party sites, but they just load you down with stuff I don't want. I need to find out where I can download it. Thanks.

Hi Macma,
The Easy-PhotoPrint EX program that comes with the printer can be downloaded from the Canon USA website and assist you with printing CD labels. Please click here to go to the Drivers and Software page for your PIXMA MG5420. Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "SOFTWARE" section and click the EASY-PHOTOPRINT EX file. When you do, a red DOWNLOAD button will appear. Please click on the checkbox below the DOWNLOAD button, then click the red DOWNLOAD button to begin the download. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Creative sb audigy, needs info on pins at the end of card

I am trying to install a panel that includes the sound card output and input connector for the panel. It connecting wire include about 5 to 20 connectors for the sound card, but it has no markings it to identify the pins on the board. I have been looking for the info for some time now and had no success. The info would be much appreciate. @7.68.93.24

=Re: creative sb audigy, needs info on pins at the end of card Those pins aren't for connecting to the front panel, they are for connecting to the breakout box that came with the Platinum version of the card. The pins for the front panel connections (if present on the card) is a 0 pin block usually in an inline config (you can pretty much thank dell for that connector becoming standard on Creative cards). If it helps any here is exactly how to use it,
http://audigy2zshowto.blogspot.com/
and if you don't want to make your own cable,
http://www.x-tap.com/
try searching ebay and you may find it cheaper.As far as the connector you are referring too,
http://www.driverheaven.net/audio-ge...ssignment.html

My 30-pin dock is connected to my lightning to 30-pin connector which is connected to my iPod touch 5g. But my iPod will only charge, and will not play music through my dock.

My 30-pin dock is connected to my lightning to 30-pin connector which is connected to my iPod touch 5g. But my iPod will only charge, and will not play music through my dock, only through the iPod's internal speaker. Help please!

Have you tried resetting both the iPod and dock? To reset the iPod, press and hold the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
To reset the dock, unplug it and plug it back in.
B-rock

Lost 30 pin dock connector cap - need info as to where I can replace it

Similar Messages

Maybe you are looking for