Lost ability to connect with Server from workstation

NW 6.5 sp5 on a Dell 2900. I am adding an additonal harddrive to our server
for use as an archive disk in a separate volume. After I loaded it into the
server and created a new VD in the raid bios I booted the computer and found
I couldn't connect from my workstation to connect to IManager. When I
looked on the logger screen I got messages about a possible bad certificate
with suggestions to run sys:/system/tckeygen.ncf or
ndlap or
sys:/tomcat/4/bin/startup-config sys:/adminsrv/conf/admin_tomcat.xml
Nothing helped.
I rebooted the server again and did not get the messages above I looked
through the logger screen and found several messages, I have no idea whether
they are new or common.
"default domain not set, you need to set it through ypset unable to log in:
error -601... NFS service initialization failed during edirectory interface
library (ndsilib.nlm) initialization
error code 9600 unloading znfs.nlm"
SFNS.NLM did not load try running schinst -n
sys:\etc\schinst.log
I have pasted the log contents:
"Info:434:11-7-2006 12:16:07 pm :
Logging into the tree : MIGRATE
This will take few moments...
Info:436:11-7-2006 12:16:07 pm : Modifying NDS schema from file :
sys:/system/schema/uam.sch.
Info:434:11-7-2006 12:16:07 pm :
Logging into the tree : MIGRATE
This will take few moments...
Info:436:11-7-2006 12:16:07 pm : Modifying NDS schema from file :
sys:/system/schema/nis.sch.
Info:434:11-7-2006 12:16:07 pm :
Logging into the tree : MIGRATE
This will take few moments...
Info:436:11-7-2006 12:16:07 pm : Modifying NDS schema from file :
sys:/system/schema/nisupgd.sch.
Info:99:11-7-2006 12:16:08 pm :
Login was successful.
Info:98:11-7-2006 12:16:08 pm : Added the object : .CN=NFAUUser.O=mgamigrate
Info:71:11-7-2006 12:16:08 pm : The config file nfs.cfg has been
successfully updated.
Info:116:11-7-2006 12:16:08 pm :
UNIX Profile of user .CN=NFAUUser.O=mgamigrate has been set as UNIX root
user.
Info:99:11-7-2006 12:16:08 pm :
Login was successful.
Info:98:11-7-2006 12:16:08 pm : Added the object :
..CN=NFAUWorld.O=mgamigrate
Info:133:11-7-2006 12:16:08 pm :
SCHINST:WORLD: UNIX Profile for the .CN=NFAUWorld.O=mgamigrate Group object
has been added and UNIX Gid is set to 65535.
Error:43:7-8-2009 8:22:30 am : Unable to login. Error Code : -601"
the screens available on the server are:
system console
logger screen
timesync debug screen
novell ssl server handshake
pkernel
java interperter
netware 6 console monitor
gwia webaccess
mta
poa
any ideas?

I am posting an edited copy of the logger file, there are some error
messages but nothing stands out to me. any help would be appreciated. I
have no idea what is going on. I have attached the entire logger file if I
deleted too much.
IPXS-4.10-0022:
Warning, unable to open default IPX configuration file
"SYS:ETC\IPXSPX.CFG"; using internal defaults.
Module IPXS.NLM load status OK
Module PERL.NLM load status OK
Perl 5.8.4 - Command Line Interface
Version 5.00.05 September 13, 2005
Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
Module PERL.NLM load status OK
Java Hotspot 1.4.2_09 Interpreter
Version 1.42.06 December 1, 2005
(C) Copyright 2003-2005 Novell, Inc. All Rights Reserved.
Module JVM.NLM load status OK
Loading module DSAPI.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Module DSAPI.NLM load status NOT MULTIPLE
Loading module CLXNLM32.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Loading module PKI.NLM
This module is ALREADY loaded and cannot be loaded more than once.
Module PKI.NLM load status NOT MULTIPLE
Default domain is not set, you need to set it through ypset
Unable to Login. : error -601. Run schinst -n and try again. If the problem
stil
l persists, see the TroubleShooting section of the admin doc.
Could not authenticate ContextHandle.Run schinst -n and try again. If the
proble
m still persists, see the TroubleShooting section of the admin doc.
Exiting...-6
01
Module NDSILIB.NLM is being referenced
You must unload NISSWDD.NLM before you can unload NDSILIB.NLM
Install for Novell eDirectory
Version 10553.21 February 10, 2005
Copyright (c) 1993-2004 Novell, Inc. All rights reserved.
Loading module XNFS.NLM
Module DSBACKER.NLM load status OK
NetWare NFS - NFS Server for NetWare 6.5
Version 1.01.10 November 28, 2005
Copyright (C) 2002-2005, Novell, Inc. All Rights Reserved.
Error : NFS services initialization failed during eDirectory interface
library
(ndsilib.nlm) initialization - Error Code : 9600. Unloading XNFS.NLM.
Error : Try running 'schinst -n'. For details refer to Native File Access
doc
umentation.
SERVER-5.70-1553: Module initialization failed.
Module XNFS.NLM NOT loaded
Module XNFS.NLM load status INIT FAIL
Module DSBACKER.NLM unloaded
Module PSA.NSS load status OK
Loading module APACHE2.NLM
Apache Web Server 2.0.54
Version 2.00.54 October 31, 2005
Copyright (c) 2000-2004 The Apache Software Foundation. All rights
reserved.
Auto-Loading Module APRLIB.NLM
Auto-loading module APRLIB.NLM
Apache Portability Runtime Library 0.9.6
Version 0.09.06 October 31, 2005
Copyright (c) 2000-2004 The Apache Software Foundation. All rights
reserved.
Loading module SASL.NLM
Module APRLIB.NLM load status OK
Module APACHE2.NLM load status OK
Simple Authentication and Security Layer 2.4.0.0 20051107
Version 24000511.07 November 7, 2005
Copyright 2002-2005 Novell, Inc.
Loading module LANGMAN.NLM
NISSERV - Error initializing NDSILIB at startup
Module NISSERV.NLM load status OK
Novell Cross-Platform Language Manager
Version 10310.47 August 9, 2004
Copyright 2001-2003 Novell, Inc. All rights reserved. Patents Pending.
Module LANGMAN.NLM load status OK
Loading module XNFS.NLM
NetWare NFS - NFS Server for NetWare 6.5
Version 1.01.10 November 28, 2005
Copyright (C) 2002-2005, Novell, Inc. All Rights Reserved.
Loading module HT2SOAP.NLM
Error : NFS services initialization failed during eDirectory interface
library
(ndsilib.nlm) initialization - Error Code : 9600. Unloading XNFS.NLM.
Error : Try running 'schinst -n'. For details refer to Native File Access
doc
umentation.
SERVER-5.70-1553: Module initialization failed.
Module XNFS.NLM NOT loaded
Module XNFS.NLM load status INIT FAIL
eDirectory Management Tool Box HTTP to SOAP shim
Version 10553.52 July 29, 2005
Copyright 2001-2005 Novell, Inc. All rights reserved. Patents Pending.
Loading module EMBOX.NLM
Module HT2SOAP.NLM load status OK
This module is ALREADY loaded and cannot be loaded more than once.
Module EMBOX.NLM load status NOT MULTIPLE
Loading module AIOCOMX.NLM
Loading module EMBOXMGR.NLM
Novell AIO Serial Port Driver
Version 6.00.02 December 18, 2002
Copyright 1992-2002, Novell, Inc. All rights reserved.
Auto-Loading Module AIO.NLM
Auto-loading module AIO.NLM
NetWare Asynchronous I/O Library
Version 7.00.08 November 18, 2003
(c) Copyright 1992-2003 Novell, Inc. All rights reserved.
Module REPAIRTL.NLM load status OK
Perl 5.8.4 - Command Line Interface
Version 5.00.05 September 13, 2005
Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
Module PERL.NLM load status OK
Perl 5.8.4 - Command Line Interface
Version 5.00.05 September 13, 2005
Copyright (C) 2000-01, 2004-05 Novell, Inc. All Rights Reserved.
Module PERL.NLM load status OK
Version 1.01.16 October 22, 2005
Copyright (c) 2002-2003 Novell, Inc. All rights reserved.
Module IPMCFG.NLM load status OK
Initializing debug network.
Finding IP interface.
Loading debug MLID...
Loading debug module BX2.LAN
Broadcom NetXtreme II Gigabit Ethernet Driver
Version 1.22 November 8, 2005
Copyright (c) 2002 Broadcom Corporation. All rights reserved.
Auto-loading debug module ETHERTSM.NLM
Novell Ethernet Topology Specific Module
Version 3.89 January 27, 2003
(C) Copyright 1990 - 2003, by Novell, Inc. All rights reserved.
Auto-loading debug module MSM.NLM
Novell Multi-Processor Media Support Module
Version 4.10 January 24, 2003
Copyright (c) 1990 - 2003, by Novell, Inc. All rights reserved.
Interrupt assignment: 4
Interrupt assignment: 4
Starting service NetWare Administration Tomcat
Apache Tomcat/4.1.31
Starting service Tomcat-Standalone
Apache Tomcat/4.1.31
Jul 9, 2009 5:37:42 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings',
returnNull=tru
e
Jul 9, 2009 5:37:42 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.action.ActionResources',
returnNul
l=true
Jul 9, 2009 5:37:43 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.util.LocalStrings',
returnNull=tru
e
Jul 9, 2009 5:37:43 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.struts.action.ActionResources',
returnNul
l=true
Jul 9, 2009 5:37:44 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.webapp.admin.ApplicationResourc es',
retur
nNull=true
Jul 9, 2009 5:37:44 PM org.apache.struts.util.PropertyMessageResources
<init>
INFO: Initializing, config='org.apache.webapp.admin.ApplicationResourc es',
retur
nNull=true
Loading module WPSD.NLM
ServiceDescriptor Natives NLM
Version 2.00 August 8, 2005
Copyright (c) 2003-2004 Novell, Inc. All rights reserved.
Auto-Loading Module N_PRDDAT.NLM
Auto-loading module N_PRDDAT.NLM
N_PRDDAT
Version 1.00 February 3, 2003
(C)Copyright 2003, Novell, Inc. All Rights Reserved.
Module N_PRDDAT.NLM load status OK
Module WPSD.NLM load status OK
Jul 9, 2009 5:37:55 PM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:9009
Jul 9, 2009 5:37:55 PM org.apache.jk.server.JkMain start
Novell GroupWise WebAccess
Version 6.5.6
(C) Copyright 1993-2005 Novell, Inc. All rights reserved.
<GroupWise WebAccess> WebAccess Servlet is ready for work
Novell GroupWise WebAccess Spell Checker
Version 6.5.6
(C) Copyright 1996-2005 Novell, Inc. All rights reserved.
Maximum suggestions: 10
Dictionary path :
SYS:\Tomcat\4\webapps\ROOT\web-inf\classes\com\nove
ll\collexion\morphology\data
<GroupWise WebAccess Spell Checker> Spell Servlet is ready for work
Jul 9, 2009 5:38:04 PM org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:9010
Jul 9, 2009 5:38:04 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=1/176 config=sys:\tomcat\4\conf\jk2.properties
Loading module EDIT.NLM
NetWare Text Editor
Version 8.00.01 October 13, 2005
Copyright 1989-2005 Novell, Inc. All rights reserved.
Module EDIT.NLM load status OK

Similar Messages

Lost connection with server

For about two days now, the bbm application has refused to launch. It has been writing lost connection with server....can any one please help! It's really urgent

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Have suddenly lost ability to connect to internet. Account and bills up to

I have suddenly lost ability to connect to the internet, include itunes and App Store. Account and bills up to up date. ANy assistance appreciated

I am having this problem as well. In the last week or two, my calendars haven't been syncing properly. Nothing goes updates to my main computer from the phone. Then in the last few days I could only access the internet sporadically, today not at all. No map showing in the gps, safari doesn't work, no weather... It says 'Safari could not open the page because the server stopped responding'. The 3G wheel is spinning and shows that there is service.
I reset my phone completely a couple of days ago, reset history/cache, etc in settings, have turned it off and on, etc with no change.

Error message "unable to connect with server. Check wifi connection"

I started having the error message "unable to connect with server. Check wifi connection" when I attempt to use search function within a certain apps and when I try to download certain magazine (eg. National geographic). I didn't have this problem with I first started using iPad, and no problems with connectivity when using other apps. Can anyone help?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Client Not connected with Server

Hi Experts
I upgraded my Patch level from 9.0 PL8 to PL9. Server and Clients are installed and it is working fine but one PC not connected with Server. While I Connect SAP in landscape server selection Page Port Number shown as 40000 instead of 30000. I changed Port No from 40000 to 30000 the error Message came as [message 60070-99999987}. I attached the Screen shot in this discussion.
Please help me to resolve this issue.
With Regards
Balaji Sampath

I have same problem and this is the solution
Go to the directory C:\Program Files (x86)\SAP\SAP Business One\Conf
Copy the file b1-current-user.xml and put it aside
Go to the directory %USERPROFILE%\Local Settings\Application Data\SAP\SAP Business One
Check the file b1-current-user.xml which is likely empty or wrong strings
Rename the b1-current-user.xml file for backup
Move the copied file into the directory.
License server name asked every time on login

Suddenly lost ability to connect on FaceTime? help?

Why would I have suddenly lost ability to connect on facebook?

Apple is having problems with os6 update. The system has crashed a couple of times, and they are working on the problem.

Connect 11g server from client

Hi,
i have 11g daatabase and 11 g client. can u please help me to connect 11g server from client
pls help with steps
thanks

Chinu wrote:
Hi,
i have 11g daatabase and 11 g client. can u please help me to connect 11g server from client
pls help with steps
thankssqlplus
/ as sysdba
Handle:      Chinu
Status Level:      Newbie
Registered:      Sep 19, 2009
Total Posts:      323
Total Questions:      123 (102 unresolved)
why so MANY unresolved questions?

Find existing connection with server

Hi,
i have used socket programming in java. when i start the server
program ,i want to know how many clients are already connected with
particular server Port.
Is it possible? pls, Tell me

Hi,
thank you for you reply. But my need is, while server is running, client can establish the connection with server. just imagine now server has connect with 5 clients. Unfortunately server going down.
And again i start the server it should listen to already existing client connections automatically.
i want to establish the connections of existing clients from the server.
if any body having java code or other ideas for this problem , HELP ME!!

A pop-up window advising of software update for Firefox appears and does not connect with server

The window suggests strongly that I update software but when I attempt to update it does nothing but try to connect with server and never does

* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.
You may need to delete active-update.xml and updates.xml as well if present.<br />
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

My ipad lost it's connection with my printer. How can I get it to reconnect with the printer?

My iPad lost it's connection with my printer. How do I get it to reconnect?

1. Reboot iPad
2. Reboot router

ERROR http: 5: Unable to initialize ssl connection with server, aborting co

HI EXPERTS,
one of my database give me below error when i start its dbconsole. and after failure it give me meassge
TZ set to Asia/Karachi
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://test:5500/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ..............................................................
........ failed.
Logs are generated in directory /u01/oracle/product/10.2/cnichol_cpuplt/sysman/log
and in trace file name "emdctl.trc" below error is logged.
ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt
ERROR ssl: nzos_Handshake failed, ret=29024
and trace file named "emagent.trc" give below error
2010-10-04 19:12:25 Thread-88238992 ERROR http: 11: Unable to initialize ssl connection with server, aborting connection attempt
2010-10-04 19:12:25 Thread-88238992 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://test:5500/em/upload/: retStatus=-1
2010-10-04 19:12:38 Thread-88238992 ERROR upload: Error in uploadXMLFiles. Trying again in 300.00 seconds.
dbconosle URL is
https://test:5500/em/console/aboutApplication
Operating system is Redhat linux AS 5.3
what is the possible cause of this failure any one can guide me.
thanx in Advance
regards,
Edited by: AMIABU on Oct 4, 2010 7:28 AM

oracle@bcm-laptop:~$ emctl
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
   Oracle Enterprise Manager 10g Database Control commands:
        emctl start | stop dbconsole
        emctl status | secure | setpasswd dbconsole
        emctl config dbconsole -heap_size <size_value> -max_perm_size <size_value>
       emctl status agent
       emctl status agent -secure [-omsurl <http://<oms-hostname>:<oms-unsecure-port>/em/*>]
       emctl getversion
       emctl reload | upload | clearstate | getversion agent
       emctl reload agent dynamicproperties [<Target_name>:<Target_Type>]....
       emctl config agent <options>
       emctl config agent updateTZ
       emctl config agent getTZ
       emctl resetTZ agent
       emctl config agent credentials [<Target_name>[:<Target_Type>]]
       emctl gensudoprops
       emctl clearsudoprops
Blackout Usage :
       emctl start blackout <Blackoutname> [-nodeLevel] [<Target_name>[:<Target_Type>]].... [-d <Duration>]
       emctl stop blackout <Blackoutname>
       emctl status blackout [<Target_name>[:<Target_Type>]]....
The following are valid options for blackouts
<Target_name:Target_type> defaults to local node target if not specified.
If -nodeLevel is specified after <Blackoutname>,the blackout will be applied to all targets and any target list that follows will be ignored.
Duration is specified in [days] hh:mm
        emctl getemhome
        emctl ilint
Em Key Commands Usage :
emctl config emkey -emkeyfile <emkey.ora path> [-force] [-sysman_pwd <sysman password>]
emctl config emkey -emkey [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -repos [-emkeyfile <emkey.ora path>] [-force] [-sysman_pwd <sysman password>]
emctl config emkey -remove_from_repos [-sysman_pwd <sysman password>]
emctl config emkey -copy_to_repos [-sysman_pwd <sysman password>]
emctl status emkey [-sysman_pwd <sysman password>]
Secure DBConsole Usage :
emctl secure dbconsole -sysman_pwd <sysman password> [-passwd_file <abs file loc>]
     [-host <slb hostname>] [-sid <service name>] [-reset] [-secure_port <secure_port>]
     [-root_dc <root_dc>] [-root_country <root_country>] [-root_state <root_state>] [-root_loc <root_loc>]
     [-root_org <root_org>] [-root_unit <root_unit>] [-root_email <root_email>]
     [-wallet <wallet loc>] [-wallet_pwd <wallet pwd>] [-trust_certs_loc <certs loc>]
emctl secure status dbconsole
Register Targettype Usage :
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep host> <rep port> <rep sid> OR
emctl register oms targettype [-o <Output filename>] <XML filename> <rep user> <rep passwd> <rep connect descriptor>

Safari cannot open page unable to connect with server?

Keep running into these errors? Safari is crashing, or Could not activate cellular network data because I am not a subscriber? Cannot get mail connection with server failed? Verizon denies network difficulties....??? Suggestions would be greatly appricated! Thanks in advance!

Wi-Fi issue? Are you in a home or business environment? Have you tried connecting and re-connecting to your wi-fi network?

HT4623 unable to connect with server

Overnight my iPad sent a message that it was unable to connect with server. All other mobile devices are running fine. So I feel it is somewhere in the settings of my iPad that needs changing. I can't get on Safari or iTunes, etc., etc.

Wi-Fi issue? Are you in a home or business environment? Have you tried connecting and re-connecting to your wi-fi network?

HTTP/1.1 302 error while connecting UCM server from ODC Commit profile

Hi Team,
We are getting HTTP/1.1 302 error while connecting UCM server from ODC Commit profile.
Error Code
oracle.stellent.ridc.protocol.http.HttpProtocolException: Http/1.1 302
Please note that target UCM is SSO enabled.
Regards,
Piyush

I am having a similar problem.
Have you been able to figure out what the issue is and/or what the library location should be?

I cannot create a new business catalyst site with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with server, try again later. How can I fix this problem?

I cannot create a new Business Catalyst site with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with server, try again later. In addition, I am also unable to load remotely a previously created Business Catalyst site as it says there is something wrong with my username or password. However when I put my password in and press test connection, it says it has connected successfully. What is going wrong and how can I fix this problem?
Thanks

Hi Ozy08,
Can you try the solutions mentioned in Re: Can't Login to Business Catalyst within Dreamweaver CS6?
If you still have problems, and you have a purchased version of DW CC, send me your Adobe ID, location, and contact details over a private message. Click my picture and use the message option.
Thanks,
Preran

Lost ability to connect with Server from workstation

Similar Messages

Maybe you are looking for