Lost ability to create multiple tabs

I've been able to create multiple tabs by clicking the "plus" sign at the right of the current tab. Haven't been able to do that for some reason. I usually create several tabs so I can view several sites by clicking any tab.

Yes, just recently upgraded, so I got confused about the QT/FCP movie.
Thank you.
In terms of the print to tape, I selected the file and went print to tape from
the created QT movie. Only small problem were two very small audio pops
on the tape that don't exist on the QT movie. Could it be a dirty deck head
or is there something I'm not doing?
Either way, thank you both for your help.
;h

Similar Messages

  • How to create multiple tabs of report in 1 crystal report file

    Hi,
    Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I?
    If there is, could you give me help on this.
    Thank you in advance.
    Rose

    Hi Rose,
    I think we cant achive the same functionality in Crystal Report designer.
    Regards,
    Shweta

  • Is It Possible to create multiple tab report in OBIEE 11g?

    Is It Possible to create multiple tab report in OBIEE 11g?

    Triple post even! Multiple tabs in a single OBIEE  &  https://forums.oracle.com/thread/2560266
    Stick to one post!

  • Problem while creating multiple tabs dynamically webdynpro abap

    Hi Experts,
    i am trying to create multiple tabs in tabstrip dynamically but the tabs are hiding behind one other..
    Let me know how to fix this.
    Thanks
    Abdul Hakim

    Are you expecting from expert only?Sorry I am not a expert, 
    About issue:...
    I think number of tabs will display that depends on the width of the container.. As of now how many tabs you have and hw many displaying at a time...
    Please increase width ofyour container and check  and let me know.
    Its just a try not a solution.
    Regards
    `srinivas

  • Clicking a link sometimes creates multiple tabs (50 - 75) and then cant quit app.

    When clicking on a new link Firefox creates multiple tabs (as many as 50 or more) and will not permit the app to quite. After I force quit and reopening Firefox same multiple tabs load again.

    See [[Firefox keeps opening many tabs or windows]]

  • TDMS File Creates Multiple Tabs of Data. Want to create only one.

    Hello NI Community,
    I am currently using the DAQ Assistant with my string pots to record displacement over a long interval of time (see attached VI). I am then using the "Write To Measurement File" vi to save the data into a TDMS file (see the "Write to File Settings" picture attached for all settings chosen for file write). The file is being written, however when I open the TDMS file, the document creates a tab in Excel for every second of data recorded (please see the attached "). It looks like the TDMS file is grouping all the data from each second together and then creating a new group of data.
    How do I get the file to write all the data onto a single tab instead of creating multiple? I do not want to have to concatenate hundreds of tabs into a single excel sheet.
    Thanks,
    Chris
    Solved!
    Go to Solution.
    Attachments:
    Write to File Settings.PNG ‏40 KB
    TDMS File Multiple Tabs.PNG ‏57 KB
    TDMSWrite.vi ‏108 KB

    You should not be using the comment.  I just removed that and it all worked for me.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Lost ability to add multiple copies of a song to Shuffle

    I lost the ability to add multiple copies of the same song to my iPod Shuffle since updating my software.
    Since updating my software, I lost the ability to add multiple copies of a song to the shuffle. Before the updates, I could add as many copies as I wanted. I liked having multiple copies of my favorite songs, so that I could hear certain songs over and over again when I was in the linear play mode.
    I also don't have a manual update option on my shuffle. I actually don’t know if I ever had this option. I just noticed others were talking about it and that your site mentioned the option, so I was trying to use the function to avoid the automatic updating and inadvertent loss of songs that may no longer be in my library. I guess I have to live with the auto-update feature, since I think the Shuffle is simply lacking this feature that is found in the more expensive iPODs.
    I just updated to iTunes 6.0, hoping that this latest update would fix my problems, but there was no change. I still have the problem with not being able to ad multiple copies of the same song.
    Any ideas?

    Thank you for the tip about renaming the song. I will try it, although I think it may not help since I don't have any way to uncheck the autofill option. As it turns out, the Shuffles don't have the option for a manual update. If I change the name of the songs, it will simply erase the original song, since it will no longer be in the library. I think there is a chance it will work, until I reinsert the Shuffle to make changes. That would be OK, if it worked temporarily, so I am hopeful that it might work. I may also be able to trick the Shuffle by adding the song from a playlist, in which I have renamed the song only on the list, not in the library.
    This just bugs me, since I could add multiple copies before the updates.
    I just tried to change the name of a song on a playlist, but shuffle changed the name everywhere in the iTunes application. It looks like iTunes may be a little like Microsoft Word, in that it starts making “corrections” all by itself. In general, I don’t like it when things start changing all by themselves.
    I may try to ditch the updates and go back to the original software.

  • Ability to open multiple tabs stopped working.

    I have always been able to open multiple tabs using Command-T - now all of a sudden when I use that shortcut, it just opens to the multi-tab screen instead of a new tab and no way to get back to the page I was on. 

    Hello:
    Since I am a mouse person, I never used that shortcut.  However, it works here
    As an alternate, if you click on the + at the right of the Safari menu bar, a blank tab will open.
    Barry
    P.S.  You could try deleting the preference file (com.apple.safari.plist) and restarting.  However, if you do that, you will need to reenter your personal preferences.
    Barry

  • What happened to the ability to bookmark multiple tabs in one click? As far as I can tell, the new Firefox has dropped this option and now forces you to create a folder, individually bookmark every page and organize the bookmarks yourself.

    Clean install of Firefox on clean install of Win7 x86. Previous bookmarks lost due to hdd crash. Trying to configure Firefox 4 like my previous Firefox 3 and finding it difficult. This was my favorite feature of the previous Firefox and I'm dismayed that it's either gone or well-hidden.

    Some menu entries are hidden by default and only show up if you use the keyboard to open the menu. Bookmark All Tabs is one of them and you see that entry if you use Alt + B to open the Bookmarks menu. You can see the same if you use Alt + F to open the File menu instead of pressing Alt and click the menu entry.

  • Lost ability to open new tab after tonight's update

    I'm using Firefox 19, it got updated automatically tonight, and I've lost the + sign that allows me open a new tab. If I restart with add-ons disable, it returns but if I disable (in normal mode) add-ons individually to isolate the add-on causing the problem, the + doesn't return, even with all add-ons disabled. I'm sick of having to re-download FF every time there's an update.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Creating multiple tab reports using the same query in Web intelligence

    Hi All,
    I have created a Universe on a BW Query which has fields as below
    AGE  Depaatment  Gender  Grade
    25       FIN                M            A
    27       LES               F            A+
    60       SWS            M             A++
    Based on this data i have created a WEbi report which shows all of these data under one tab.
    Now i create a new report tab in the same Webi Document by right cliicking the existing report and going to inset report and saving it.
    Similarly i create two more new report tabs.
    in each of these tabs i want to show data only for the concened departments.ie =1st report contains all the departments.
    2nd report contains only finance data, third contains only Les data  and fourth only SWs Data.
    Is it possible to create this report using the same query?
    Regards,
    Raj.

    You should use report filters, not query filters.
    A query filter will affect the entire document. Every report tab that pulls data from that query will be impacted. If you start with a single report, by default it shows the data from the query. If you duplicate that report tab, then it's still attached to the first query. There are various ways to create report filters (input controls, quick filter, invoking the filter area from the toolbar) and a report filter impacts only blocks on that report tab. You can even create block filters by clicking on the block first, then creating your filter.
    This is a fairly confusing bit for folks that are new to Web Intelligence.

  • [Aperture 3] Lost Ability to keyword multiple photos

    I hope the title was somewhat descriptive without being too long...
    Anyway, I'm a fairly committed used of Keywords, or tags. (In fact, moreso than the built in metadata which I could probably use more appropriate, but that's a post for a different day...)
    I'm pretty behind on sorting, rating, tagging my photos, and started work on catching up this past week. I immediately noticed that where I used to be able to select multiple photos in the browser, and then 1) remove unwanted keywords in bulk and/or 2) apply keywords in bulk to multiple photos, I can no longer do so.
    I've restarted Aperture, as well as my computer in case something in the DB was hung, but neither seems to make a difference. I haven't changed any settings in Aperture. So...?
    Any thoughts/ideas on what may be going on, or more importantly, how to rectify, and I would GREATLY appreciate it!!
    thanks
    nick
    UPDATE:
    It wasn't until I posted this that I found another discussion thread on the same topic - THE FIX:: Somehow EDIT\PRIMARY ONLY got selected, and unchecking that fixed the issue.
    Sorry for extra spam on the boards here - moderator may delete.
    thanks!

    Hi Ron
    Open Organizer and press Ctrl+K to bring up preferences.
    Along the bottom row of buttons try clicking the one to the left “Restore Default Settings”
    Close the program and re-open it. See if that works.

  • Lost ability to create final cut movie from sequence...

    I'm on Final Cut Pro HD 4.5 and cannot create a Final Cut Pro movie from
    a sequence. When I go to my export functions, I only get QuickTime options.
    I made a Final Cut Pro Movie yesterday, so it does work. Any suggestions most welcome.
    Additionally, in printing to tape (to PD150 Sony cam through firewire), the video captures fine, but the audio (aiff stereo tracks on track one and two) cuts out intermittently throughout recording. Again, any assitance most welcome.
    thank you.

    Yes, just recently upgraded, so I got confused about the QT/FCP movie.
    Thank you.
    In terms of the print to tape, I selected the file and went print to tape from
    the created QT movie. Only small problem were two very small audio pops
    on the tape that don't exist on the QT movie. Could it be a dirty deck head
    or is there something I'm not doing?
    Either way, thank you both for your help.
    ;h

  • Lost ability to select multiple images easily in Organizer

    I have always been able to select a range of photos by clicking on the first and then Shift-clicking on the last photo in the range.  Everything in MS Windows and almost all Windows apps work this way.
    Suddenly, I can no longer even select an image by clicking it in Organizer.  The only way to select is to drag a rectangle around the particular photo until it's selected.  The only way I can select more than one is to hold down the CTRL key while dragging selection boxes around additional files.  The only way I can select a range of photos is to laboriously CTRL-drag-select each one individually.
    What in the world happened?  I cannot see anything in Preferences that applies to this situation and searching on the keywork, "select" turns up nothing applicable.
    Thanks.
    Ron

    Hi Ron
    Open Organizer and press Ctrl+K to bring up preferences.
    Along the bottom row of buttons try clicking the one to the left “Restore Default Settings”
    Close the program and re-open it. See if that works.

  • Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

    Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

    Hi LRagsdale517,
    You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
    Please let us know how it goes.
    Best,
    Sara

Maybe you are looking for