Lost ability to play sound in FCP HD
All of a sudden I can not play sound in Final Cut. Can play sounds on the rest of the computer. Any ideas?
Try FCP Rescue to delete your FCP Preferences.
http://fcprescue.andersholck.com/
Similar Messages
-
Hi,
My wife lost her iPhone two weeks ago while on vacation in London (cell service inoperative in foreign country). Using Find My iPhone app on my device, I activated Lost Mode and Play Sound. However, both are listed as "Pending," since it those actions require the phone to connect to the internet (wifi only due to no cellular data coverage.).
We recently returned home and purchased a new iPhone.
However, when looking to restore the apps/settings from her old phone using a previous iCloud backup, iCloud indicates that the old phone connected to iCloud and backed up the original phone at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)?
If the phone was activated and connected to the internet via a wifi signal, shouldn't it immedately lock, show up on the map, Play Sound, and send me an email that the phone has been found?
I also read somewhere that if running iOS 7, the iCloud website interface enables you to track previous locations, for instance if the phone moves from wifi hotspot to hotspot. Is that true? If so, how do I do that?
Thank you for your time, and have a great day!
Sincerely,
- Mattjust giving this a wee bump as time is of the essence here and i need advice/ answers quick!
apologies if i've broke any rules!
alex -
Suddenly lost ability to play XVID
Hi all-
About a month ago I suddenly lost all ability to play XVID .avi files. Not sure why; as far as I know, nothing changed.
Quicktime says the files are not movie files. VLC just shows a timeline with a playhead moving across it for a few seconds and then stops. FCP6 doesn't recognize them either.
I've tried removing and adding XVID and DivX components and so far nothing works.
The only thing I can think of is that I lost my DSL for several weeks around the same time, so maybe something tried to phone home and couldn't so it turned itself off.
Any thoughts?Install http://perian.org component and trash the older components if you notice conflicts.
-
I have a 13" Macbook Pro running OSX 10.8 and when I tried to update to 10.8.1 through the Mac App store it didn't acknowledge that there was an update available so I went to the apple website and manually downloaded the update. When I attempted to update it that way the installer said that my computer did not meet the requirements of the update. That was strange as it was already running 10.8.
So I called apple care and then gave me instructions to restart my computer holding option+command+R and redownload Mountain Lion and after it finally finished, it installed but now I just noticed that my sound icon on the menu bar is greyed out and in system preferences I cannot adjust the sound output. I don't understand what happened, all I wanted to do was update my OS. If anyone has any solutions I'm open. I'm also going to set up a genius bar appointment.
Thanks.I have a 13" Macbook Pro running OSX 10.8 and when I tried to update to 10.8.1 through the Mac App store it didn't acknowledge that there was an update available so I went to the apple website and manually downloaded the update. When I attempted to update it that way the installer said that my computer did not meet the requirements of the update. That was strange as it was already running 10.8.
So I called apple care and then gave me instructions to restart my computer holding option+command+R and redownload Mountain Lion and after it finally finished, it installed but now I just noticed that my sound icon on the menu bar is greyed out and in system preferences I cannot adjust the sound output. I don't understand what happened, all I wanted to do was update my OS. If anyone has any solutions I'm open. I'm also going to set up a genius bar appointment.
Thanks. -
Safari & Chrome lost ability to play flash videos
Everything was working fine on my 2013 macbook air until one day, no videos on any site will play (i.e. youtube, dailymotion, vimeo, etc). I have no idea why this happened or what I could have done to cause this but I have literally tried everything to fix this problem and nothing seems to work.
I have had this issue for about a few weeks now and I still haven't found a solution. Here are a few screenshots of what I'm experiencing in Chrome:
I can see the length of the video but all of them are stuck loading. Safari is also unable to load any videos.
Here is a list of what I have tried so far:
1) Uninstalling and re-installing flash player did not fix the problem
2) Deleting my cookies or cache files did not fix it either
3) Disabling all my extensions (i.e. Adblock, ghostery, etc.) unfortunately did not fix the problem either
4) I tried enabling and disabling a few of my plugins as noted in this thread here:
https://productforums.google.com/forum/#!topic/chrome/ifL98iTMhPs%5B1-25-false%5 D
However, no combination of enabling or disabling the PPAPI or NPAPI seemed to work.
Here are some other strange things that I have noticed:
1) I am using TekSavvy's 25 Mbps cable internet with a D-Link DIR-815 router. My iPhone 5s and Windows laptop have no problems connecting to the internet and they have no problems playing videos. Even my iPhone can play youtube, dailymotion, or vimeo videos. My MBA is solely experiencing this video problem and yet it has no problems connecting to the internet. I have no problems viewing any websites; I just can't seem to get videos to play properly
2) All videos load perfectly fine if I tether off my LTE from my iPhone. All videos also load perfectly fine when I am connected to my friend's Rogers' 60 Mbps cable internet. Could it be that perhaps faster internet is the solution?
3) However, occasionally all videos play perfectly fine for only one day and revert back to not playing the day after. This seems to happen once a week.
4) Even more interesting, if I sign into my youtube account, I am able to play youtube videos. But I suspect that this has something to do with HTML5 being enabled by default in Chrome but I am uncertain.
All thoughts and ideas are welcome. Any help would be greatly appreciated because I really don't know what is causing this problem. Thank you!Hi Carolyn, I'm not sure what you mean. HTML5 is enabled by default by Chrome. I do not see an option to "Use the Default Player". In fact there doesn't appear to be an option to switch to select any other player. Here is what I see:
-
Lost ability to play .mov files in Mountain Lion orginally saved in Lion or earlier
I'm hoping someone can provide an explanation for this one. I've edited many .mov files using QT7pro under OS 10.7 and earlier and have always saved these files as .mov files. I recently updated a 2008 unibody MacBook with a new SSD and a new install of 10.8 and I'm getting the dreaded codec error messages while attempting to open these files on that computer. I've been doing this for so long without any problems, that I haven't a clue as to what codec could be creating the issues. This is even more infuriating when many of the original files that I brought into QT7pro on my other macs were QT .mov files. So, how can a original QT file, saved on another mac and edited and then saved in QT now be broken in Mountain Lion? Thanks for any help you can offer.
Markthanks very much for your reply Kurt, that news is quite a relief. As you can probably tell, i'm about to re-build my system from scratch, reformatting my drive. I'm currently at the point of researching do's and don'ts and i should add i very much liked your article on font management!
Best wishes, Richard -
My Ipad video stopped working. Don't know of any "incident." One day it worked; the next day it didn't.
There is a whole load of trouble with iOS 8.1.1 and DRM playback that us developers have experienced. Something got broken in iOS 8.1.1 which we cannot fully understand and is (in all likelihood) the problem you are experiencing.
Yes, Apple should fix it, and I agree that it is annoying, but it is still a whole load better than the mess that is the MS world, and even if Apple went bust today, I would not be jumping ship over DRM issues. -
The system has not playing sounds. For example, iCal has been displaying alarms, but not playing the requested sound. The above applies to all audio, not just iCal, but iCal is my most pressing need. The system regains the ability to play sounds after a restart, though that's not a useful solution.
Any suggestions?I withdraw this question. It's in:
system preferences -> sound -> output -
Lost the ability to play multiple sounds!
Since switching to archlinux, the only problem that I am unable solve is the inablity to play multiple sounds.. i had this problem when i first installed archlinux. back then i tried installing pulseaudio and found that cumbersome. eventually went back to alsa and found magically i could play sounds at once..
now again it has reoccurred ever since the module init tools upgrade. i have tried reconfiguring alsa with alsaconf with no avail.
on trying to play sound file from the 2nd app i get a knotif saying
The audio playback device HDA Intel (ALC880 Analog) does not work
Falling back to .
some of the conf files i have:
[$]> grep MODULES /etc/rc.conf
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MODULES=(e100 mii slhc snd-hda-intel snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd soundcore !snd-pcsp)
[$]> grep DAEMONS /etc/rc.conf
# DAEMONS
DAEMONS=(syslog-ng dbus @network netfs crond alsa hal cups @openntpd)
[$]> cat /etc/modprobe.d/modprobe.conf
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
[$]> cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
[$]> cat /etc/libao.conf
default_driver=alsa10
[$]> lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)djszapi wrote:It seems to good. Did you try pulseaudio now too ?
no i dont want to. it doesn't seem right with kde -
my ipod 5 was just recently stolen in a waterpark (same with my best friend) and when i went on to find my ipod I pressed play sound and lost mode but it never successfully did all those things because my ipod wasn't or isn't connected to a wifi network as it says in the app. so how will I ever find my ipod if it never is going to connect to a wifi network without the thief accessing my ipod (I have a passcode). and also when I check the app once in a while it says ipod is online but cannot find location, so does that mean the thief is using my ipod or is trying to get in?
Yo are correct. It has to connect to internet for the FindMyiPhne features to be transmitted to the iPod
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
If you have any information you can email me at********or answer here
location is off
can't track it
played sounds
lost mode is on
not sure if someone took it
not sure if it has been turned on and the message has been seen
could they have erased it and gave it another name
can it be tracked another way
is there a way so that i can get it back
Please help me!!
<Edited by Host>What To Do If Your iDevice Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. iCloud- Use Lost Mode
6. What to do if your iOS device is lost or stolen
7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
8. Find My iPhone
9. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
Why have I lost the ability to play video in iTunes?
I recently upgraded to itunes 11.0 but now I seem to have lost the ability top play video podcasts, movies or even see trailers in the itunes store movie section. I did install an application called eyetvreporter to try to recover the activation code for eyetv shortly after installing itunes 11. I am not sure this had any effect because Ii can still see the eyetv on the computer. I have reinstalled os X from the recovery partition and reinstalled itunes 11.0. I have no idea how to reset iTunes to allow me to watch videos.
Strange! I changed the screen resolution, deleted the eyetvreporter, rebooted and the video came back. The problem is solved but not understood.
-
Lost my Itouch month ago. Tried finding using find my iPhone app. It shows your device is off line. Will play sound or notify when online. Can I locate the position or location of my Itouch without connections to wifi or even if it's switched off or betters is total drained off
No, FindMyiPhone only only reports it current position
lost/stolen
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Since the recent upgrade I lost my bookmarks and ability to hear sound on videos. First I lost VIDEO then thought it was fixed only to find I had no SOUND when the video opened.How do I fix that NOW!
I have lost a week fiddling with reinstalling and suggested fixes to no avail. I have important bookmarks used in project research and study plans . Can I go back to my original last working version?
NEED HELP ASAP
THIS IS A VERY DISAPPOINTING EXPERIENCE WITH WHAT I THOUGHT IS A GOOD BROWSER - NOT SO SURE ANYMORE!!!Hi movision,
Sorry you are having problems with lost bookmarks. I note you had problems last year [/questions/851481] and hopefully this time you will have been routinely making your own backups of bookmarks.
* see [[Restore bookmarks from backup or move them to another computer]]
So two steps
# Immediately make a backup of your firefox profile <br/> (That ensures any auto bookmarks are preserved). IMPORTANT do this first, restoring bookmarks overwrites existing bookmarks. Put the restored files somewhere safe such as your Windows desktop.
# Did you create any bookmark backups, if so the linked article above explains how to restore those bookmarks
You may also be interested in using Firefox sync, if you have a second device,as it allows you to sync bookmarks on the other device; and they are effectively then backed up.
* [[Firefox Sync - Take your bookmarks, tabs and personal information with you]] -
HT201365 can I use the play sound option even if my device is on vibrate only when it was lost?
can I use the play sound option even if my device is on vibrate only when it was lost?
Yes, even if the the ringer is switched off at the side of the phone the "Play Sound" option still works.
Maybe you are looking for
-
Ok so I am constantly very paranoid on my mac ever since I was attacked badly a year ago and my system was totally compromised (I attached a second monitor and fiddled with hardware settings, so when the main screen went to sleep the other would stay
-
TS3694 iPhone 3 GS restore error 2001 or 2006
Need help with restore error 2001 or 2006; I have updated iTunes and OS to latest releases. Thx, LJ
-
Table control:screen painter(Module Pool)
hi ! Table name :ZDR_MOD. Internal table:ITAB. I am doing Custom table control in screen painter.I have done desgin in screen painter,I am not writing any doing in PAI abd PBO. while compiling it showing error like, "The field "ITAB-MANDT" is not a
-
Set transparency of UIView not working
I'm trying to set a UIView to a transparent color. I found this snippet which partially works. Here is the code from the IBAction that calls the UIView: Creed *creed = [[Creed alloc] initWithNibName:nil bundle:nil]; [self presentModalViewController:c
-
Release of History from Info Cube to Planning Area
Hi Experts, I am using program /SAPAPO/RTSINPUT_CUBE to load sales history data from Info Cube to Planning area. Most of the data gets loaded but for few CVCs we get following message: - 549 combinationens of InfoCube are not contained in the BasisPl