Lost ability to use AEBS

Wall Street running 9.2.2 and Lucent Silver PCMCIA card. AEBS was set up under 10.4. This setup worked fine during previous several months. Recently switched over to encripted operation of the AEBS and that worked fine with my MBP.
Today tried this setup with the G3 PB and get an error when I load the password. BTW, the PB/airport card still sees and works with the wireless Verizon DSL modem.
Any suggestions to get past this AEBS error message would be appreciated. The actual error msg. simply states that an error occurred.

64 bit WEP does not appear as an option when setting up the AEBS under OS 10.4.
However, based on your reply I went back and selected the
40 bit WEP setting and that did work with the G3 PB with the Lucent Silver card.
40 bit WEP is a lower level of security, but previously I had no WiFi security. The chance of discovery is rather remote where I live.
Anyway, it seems to be working and that's what matters.
Thanks for suggestions folks. This board is so great in that respect.

Similar Messages

Lost ability to use text message (SMS) after update!

I updated the device software on my Z10 last night and since then cannot compose or reply to a text message. I have tried pulling the battery (more than once) and deleting and recreating but nothing is working. Please help!!

Hello Palindrome,
Welcome to the BlackBerry Support Community Forums.
Can you please confirm a few examples of some situations where this issue may occur?
1. Did the device lost power (for example, battery was removed) during the installation process of the software update?
2. Did the BlackBerry Z10 smartphone have an unreleased version of the BlackBerry 10 OS installed before the update?
To resolve the issue you are having we will most likely have to reload the BlackBerry 10 OS using BlackBerry Link.
I look forward to your reply!
Goose947
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.

I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.

csdwarf,
So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
BrianP_VZW
Follow Us on Twitter @VZWSupport

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." Comcast tells me server is not down all other network activity is fine. WHat's up with this?

Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account. My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
This is not an issue if I log onto the Comcast site.
And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
Argh... :-(

Why have I lost the ability to use the Background Brush in Low Key in my Photoshop Elements 11 Program??? Need this fixed!!!

Why have I lost the ability to use the Background Brush in Low Key in my Photoshop Elements 11 Program????? I need this fixed, can anyone help me???

I'd try resetting the pse 11 preferences.
In the pse 11 editor Adobe Photoshop Elements Editor (Edit)>Preferences>General, click on Reset Preferences on Next launch
and then restart the pse 11 editor.

When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich/

When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich?

The reason your applications do not work in Lion/Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006. When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
So you do not have to accept recriminations from others for previously using Rosetta without even knowing it was present and running!
So for those of use that need to upgrade to Lion/Mountain Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
[click on images to enlarge]
And now Mountain Lion:
If you are unable or unwilling to update your inventory of PowerPC software, this solution offers you an alternative for not more than the $29 cost of Snow Leopard and $79 cost of Parallels (cheaper via internet sources).
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439
Assistance with the installation process is available on this linked forum.

In lion os lost ability to scroll back into folders

In Lion OS have lost ability to scroll back and forth in folders within folders on mouse. Bought Trackpad - still cannot do it. Asked about it at Apple store - even had an employee create multiple folders within folders - could not get the mouse or trackpad to scroll. Had to use back arrows.

I have found the same issue - this is very frustrating and I'm at a lost to understand why this functionality has been removed ... or is it only happening to some systems? Being able to "swipe" through folders was great and the whole "gestures" aspect of Lion was significantly hyped.
Has anyone else found the same problem?
Thanks.

TS1722 Have lost ability to open Boot Camp on start up or restart. Only Mac icon shows up. Worked perfectly for two years and now it implodes. Any hope of re-opening Boot Camp?of recapturing data in

Have lost ability to open Boot Camp on start or restart. Icon does not show up. Had been working for 2 years, then nothing. Recently had problems with Kodak Easy Share in PC partition. Any connection? Any hope of reopening Boogt Camp without losing data already there?

Can you see there is a partition?
Can you boot Windows 7 DVD?
Did you think you would never need a backup image?
So no Safe Boot, no F8, possible?
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions. During testing it was available free, but now costs US$19.95. MR user Rodus reports that it damaged their OS X partiton and a reinstall was required, so heed the warning and have a backup.
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section

Lost ability to access map after upgrade to Lightroom 4.2

403. That’s an error.
After upgrading to Lightroom 4.2, have lost ability to access maps. Suspect it may have something to do with client access. On one occasion got message.
Your client does not have permission to get URL/maps/api/js?sensor=false&v=3.6&callback=initial%20ize&region=ENfrom this server. That’s all we know.
However, have been unable to replicate this.
Using Mac OSX 8.2
Any clues?

Hello Luiz
I'm so sorry you lost those features. Let's look into this. Which device do you have? Did you have the pictures backed up with an application?
JoeL_VZW
Please follow us on twitter @vzwsupport

Upgraded to Yosemite and lost ability to send email!

UPGRADED TO YOSEMITE AND LOST ABILITY TO SEND EMAIL!!

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Please use mixed case in your posts. CAPs is shouting and is poor netiquette.

Using AEBS with non-wireless Mac mini to connect with modem wirelessly

Daughter has a Mac mini w/o wifi on 2nd floor and DSL wifi modem which must be located on 1st floor. Due to other old computer, modem is configured to 64-bit WEP for wireless. Want to add mini to her network. (I've discovered that 40-bit mode on AEBS is really 64-bit mode.)
I'm trying to use a new Airport Extreme Base station by connecting mini to AEBS via Ethernet cable. Then I'm hoping to configure AEBS to connect to the DSL modem wirelessly - don't know if that is possible. I tried setting AEBS to "join a wireless network". It finds the DSL network, so I enter the modem's password. I've then gone through a number of configurations on AEBS but each time, when AEBS restarts, it doesn't get out of yellow blinking light or (on one try if I recall correctly) I got the green light - but then Airport Utility is never able to find AEBS and I end up starting from scratch by resetting AEBS.
1) Can I even use AEBS to connect to a wireless network and have a Mac wired to it so the Mac can reach the Internet?
2) if yes, what wireless mode should I set AEBS to? What other settings do I need to get right?
Thanks

This is a "n" version of AEBS.
Please refer back to the previous posts. I was talking about an AirPort Express (AX) as the device that has this special feature.
Ironically, the less expensive AirPort Express will do what you want with a special feature that allows it to "join" a wireless network and then enable the Ethernet port.
If you have an AirPort Express 802.11n, I will post the steps for you if you want them.

I've just upgraded to V5.0 and now I have lost ability to 'open in new tab'

I've just upgraded to V5.0 and now I have lost ability to 'open in new tab' whats happening?

Thanks but I've reinstalled V4 until V5 is stable and more or less working the way I want to work - not the way some programmer thinks I should want to work.
You know change is OK but only if it makes things better for the user Change shouldn't be made to make the developer feel good about his/her expertise. For me V4 was Good. V5 gives me too many issues to deal with - I just need a relatively simple browser (and I guess I'm not the only 1 out there that feels like this).

Lost ability to print as PDF following reader upgrade

Just upgraded reader and now have lost 'Print as PDF' as a printer option on my selectable drop down printer list.
Am running a copy of Acrobat X Pro and all was well before reader upgrade completed this am.
Can anyone advise how I recover ability to print as PDF in my print options?

Thanks, repaired Acrobat and print function has returned.Your help is much appreciated.
Date: Mon, 28 Jan 2013 16:28:53 -0800
From: [email protected]
To: [email protected]
Subject: Lost ability to print as PDF following reader upgrade
    Re: Lost ability to print as PDF following reader upgrade
    created by David Kastendick in Acrobat Installation & Update Issues - View the full discussion
But did you repair Acrobat? The Adobe PDF printer is a function of Acrobat, not Adobe Reader. Uninstalling/reinstalling Acrobat does essentially the same thing as a repair, but takes a bit longer.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5029549#5029549
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5029549#5029549
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5029549#5029549. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Does the Macbook pro retina have the ability to use external speakers

Does the Macbook pro retina have the ability to use external speakers

The speakers will have to be externally powered and have internal amplifiers. Is that the case?
Ciao.

EA1 - Ability to use Search option and code collapse/Expand option in ...

Noticed the following feature which was Scheduled for Release 1.5 is missing.
"Ability to use Search option and code collapse/Expand option in the Normal mode of PL-SQL Editor"
This feature could save a lot of time on code reading/review/....
Thanks,
K.Nataraja Suthan,

You can use the search on the read only (normal mode) of the PL/SQL Editor. Either through menu or using ctrl F.
The other is still an enhancement and is being tracked.
Sue.

Lost ability to use AEBS

Similar Messages

Maybe you are looking for