Lost Access Key

Hello Gurus,
I was given a Developer key (Access key ) long back and used that in Sandbox, after three four months old e-mails will automatically gets deleted from my inbox.
now I need to the same developer key which I used in Sandbox and could not find it in my e-mails. I haven't noted it down anytwhere.
Please let me know if there is a place I can go and check for the access key.
Thanks-

Hi Rahul,
Max is right.
You can go the table DEVACCESS.
In that an entry against your user id and the developer key will be maintained.
You can pick it from there.
Regards,
SuryaD.

Similar Messages

  • HT6170 lost password id apple and lost recovery key

    I lost password id apple and lost recovery key,how to reset my password

    Do you have another trusted device for two-step verification?
    See:  Frequently asked questions about two-step verification for Apple ID   
    http://support.apple.com/kb/HT5570
    What if I lose my Recovery Key?
    If you lose your Recovery Key, you can replace it any time:
    Go to My Apple ID.
    Select Manage your Apple ID and sign in with your password and trusted device.
    Select Password and Security.
    Under Recovery Key, select Replace Lost Key.
    When you create a new key, your old Recovery Key is no longer usable.
    and
    What if I forget my Apple ID password?
    You can reset it at My Apple ID using your Recovery Key and one of your trusted devices.
    Apple Support can't reset your password for you. To reset your password, you must have your Recovery Key and access to at least one of your trusted devices.
    if you have neither your AppleID password, nor your Recovery Key, nor a trusted device, not even Apple can help you to get access to your account.

  • HT5577 I lost recovery key and trusted device, how do I rescue my funds on account?

    Lost recovery key and trusted dev, and need to transfer balance on account how do I do this?

    You will need one of your trusted devices to be able to change your password : Apple ID: Can't sign in with two-step verification - Apple Support
    Nobody else should be able to download from a new device or computer unless they have access to two of your password, a trusted device, and your recovery key. You are sure that they are using it e.g. there are a number of phishing emails doing the rounds saying that something has been downloaded on an account and to click on a link in the email if it wasn't you that made it so as to request a refund (i.e. so that they can capture your password and payment details).
    If they are 'proper' purchases then you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Lost Access to iTunes Library

    Hi 
    I have lost access to my previous Itunes Library.... If this topic is already covered please point me to the thread as I searched under various Library posts and they are all either to do with backing up to an external HD, transferring to a new PC, restoring from an iPod or iPad, or repairing corrupted files....  but not how to recover from basic stupidity and operator error! I’m a beginner as you will see!
    I was trying to load some movies from my PC onto my iPhone4  to watch on vacation.... to free up space I first removed most of my music and Apps from the iPhone by unchecking the boxes and syncing to make room.... intending to restore them on my return.  Next I tried (but failed) to work out how or where to copy the movies from my PC to iTunes so as to be able to sync them to the phone. There was a Tab called “Films” but this only had some of my camcorder clips and I could not find how to load my movies into it. I mistakenly thought (I now realise) that I should try creating a new “Library” – which I would call “Movies” – to which I might be able to copy my movies to then sync to my iPhone.  I guess I was confused as to what a “Library” was.... !
    So I followed the instructions to create a new Library:  Shift key –  iTunes –  “Create New Library” – called it “Movies” and OK. It worked as when I now open iTunes the interface is called “Movies” - but of course it is empty.  However this is now the default Library that opens and I cannot find my previous iTunes library with my music, Apps and Playlists.  I looked in MyMusic and can see the new (empty) “Movies” Library listed....  and another under “iTunes/Previous iTunes Libraries” where there are 19 Libraries listed by date from 2006 onwards – the most recent being two months ago. When I open them they are all called “Movies” and the  Playlists are the default ones – not my personal ones.    I can see all my Apps listed separately under “Mobile Applications” so they are all still there.... I can see the .itl and .ixl files - but when I open them they are both showing the new empty Movies Library.
    So where has my previous and most recent Library ("John's Library") with all my old Playlists, Apps etc gone?  How can I find and restore it as the default Library that opens – instead of my new “Movies” one ? I tried Shift/open iTunes/Choose Library but it is not listed. (In my new (empty) “Movies” Library under Edit/Preferences/General I can see details for configuring “John’s Library” but no way to access the data)
    And – when I do -  what SHOULD I have done to get my movies onto my iPhone – and is it to “Films”?!!!! I have iTunes 10.6.1.7 on a PC with W7.
    Thanks!

    Double-clicking on an itl file simply opens the last library iTunes was opened with. To change back to your original library you need to use the shift-start-iTunes method, then browse to the correct folder and file.
    Under Edit > Preferences > General tab change your language from English UK to English US, then close and reopen iTunes, to have the sections of your library change to Movies and TV Shows instead of Films and TV Programmes. (That particular bit of localisation is a silly idea if you ask me.)
    tt2

  • My mac air has lost the @ key. It is shown as shift 2 but that now gives the € sign. Help please

    My Mac book air has lost the @ key. It was accessed by using 'shift 2' but this now gives the € symbol.
    I have shift clicked all keys and alt shift etc.
    Help please

    Which has what to do with an iPhone? (You posted in the iPhone in Business and Education forum).
    I'll request that this be moved.

  • Do We need access key for Additional Data B in VA01

    Hi all,I have to add fields in Additional Data B,I have searched SDN about it and came to know that it is screen '8459' of program 'SAPMV45A',but it is asking key for that,is it safe applying access key for this screen?
    Thanks in advance.

    >is it safe applying access key for this screen?
    yes it is safe. SAP provided the screen 8459 only for adding our own custom fields to it. For this you need access key for the first time. along with that you need access key for
    PBO include, PAI include
    MV45AOZZ ,MV45AIZZ .
    check it once.

  • I lost access to my email account quite a while ago.  I don't remember what password I had on it.  Even though it says everywhere else what my apple id is in the link that comes up you  can't change it

    I lost access to my email account quite a while ago.  I don't remember what the old pass word is.  My I cloud account under my email settings is correct.  My phone set up fine, but when I set my ipad up, it comes up with old email address.  In the email settings the icloud is correct.  But it will not let me change it in the part I need to.  It is greyed out.  This is actually for the iphone 5.

    If you're running iOS 6, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID.  This deletes the account and your iCloud data from your device, but not from iCloud.  Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
    To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account.  To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll.

  • How do i delete an old apple id i have lost access to both primary and recovery email

    how do i delete an old apple id i lost access to both emails?

    Welcome to the Apple Community.
    You don't need access to the email address, just enter the address and your password, that's it.

  • HT5621 What do you do when you've lost access to your e-mail and your apple ID and have no way to reset them? (with the find my iPhone feature enabled)

    Hi
    I've lost access to my e-mail and my apple ID. No way to reset them. It's a hotmail email address and Microsoft is refusing to reset it even after I provided all the necessary proof of ownership.
    2 problems:
    I can't switch to a new apple id and loose all my purchased apps
    I can't switch to a new apple id as I'm being asked for the password of my current apple id - to disable the 'find my iPhone'-feature
    How do I proceed as my device is virtually unusable as is ..
    Many thanks

    This is a user to user community, Apple are unlikely to read your comments, if you have any suggestions that you think might enhance iCloud you can send Apple your feedback here.
    We also can't speculate on what exactly iOS 7's new security features will actually do, all that's available is what has been said so far by Apple, anyone using a developer version is forbidden to discuss it anywhere but in the developers community.

  • How Can I Disable Access Keys - Alt- and Ctl- on All Web Sites?

    How can I tell Firefox to Disable the use of Access Keys such as Alt-? and Ctl-? on All Web Sites?
    Thanks.

    See:
    *http://kb.mozillazine.org/Accessibility.accesskeycausesactivation
    *http://kb.mozillazine.org/Ui.key.contentAccess

  • URGENT - HELP NEEDED WITH ECC 6.0 ACCESS KEY and USER SETUP

    Please help me with the two issues:
    1) In ECC 6.0, When I go to SE12 , table V-FAGL_ACTIVEC (New GL Activation) to make the table display and maintenance allowed, I am asked for the access key. What is the access key that I am supposed to put here. When I go to DEVACCESS table and put my username, I still dont get the access key.
    2) Also I need to know what should be maintained under SU01 to give a user all authorizations. I have SAP_ALL and SAP_NEW. Is there anyother profile need to be given here. Also do I need to give anything under roles tab in order for the user to have all accesses??

    OK I have TAR for this:
    TAR 4234076.996
    and related issue discussed in regards to 500 Internal Server Error described on Neverending frustration with JDeveloper
    with the TAR number
    TAR 4332393.995
    The latter has been demonstrated and confirmed to be a BUG at this point. For the future updates on this issue please refer to
    Neverending frustration with JDeveloper

  • Access key needed when creating a new database table with SE11

    Hi,
    I'm using SAP Testdrive (evaluation) on linux in order to learn a bit about ABAP programming. I want to create a new database table in the  dictionary to be used in my programs. I proceed in the following way:
    1) I run the SE11 transaction
    2) At the first entry I write the name of the table to be created (in the Database Table field)
    3) I click on the create button.
    But then the system asks me an Access Key to register, where can I get this?
    Thanks in advance,
    Kind Regards,
    Dariyoosh

    Ok I found the answer to my question in another thread
    Developer Key
    Make sure that your program names starts with "Z" or "Y", otherwise the system will ask you to register the object because it thinks you are creating/changing in the SAP namespace.
    In fact this was my error, my table name didn't start with neither "Z" nor "Y".
    Kind Regards,
    Dariyoosh
    Edited by: dariyoosh on Nov 13, 2010 12:34 PM

  • How to get access key while creating database view in R3

    Hi all experts,
    I am new to SAP so please forgive my ignorance.
    From R3, I am trying to create a new database view named ZVENDOR_ATTR  which will be based on LFM1.
    When i go to SE11 -> chose view and click create then it shows a pop up window that says "you are not registered as a developer. Please register in the Online Service System (OSS). In the OSS you will receive an access key."
    I don't know how can i get the access key and proceed now. Please note that i have installed this BW3.5 and R3 on my laptop. From the default user ddic, i have copied and created a new user 'sapuser1'. I am now using the sapuser1 to logon  and attempting to create the above mentioned Database view. It seems like this sapuser1 as it is copied from ddic is not a developer.
    So anybody can please help  how to create/get this access key to proceed  further.
    I will give full points. Please help.
    Thank you so much in advance
    ak

    Thanks All,
    Does it mean that i can not create any database object without the access key from service.sap.com? As i told that i installed this BW3.5 / R3 on my laptop to train myself but i don't have an account on service.sap.com.
    However i can login to R3 system as admin (i have access to the system using ddic or spcpic). Is there a way that a new user with deveoper role can be created by the admin without going to service.sap.com.
    Please advise.
    Thanks.
    ak

  • Lost access to one of my iTunes libraries with 10.4

    I have upgraded to OSX10.7 and iTunes 10.4. Before I was running two separate libraries in iTunes. One works now but the other is greyed out and will not open. Is there a way I can convert this other library?

    I have answered my own question but it may be of general help - If you have more than one library but only one of them is recognised, try the following: Compress the one which is recognised and throw out the original. Then attempt to start iTunes. It will say you need to find or create a library. Select Find and do not try to select the library you want to open. Instead select the folder in which it resides. It should then open fine. If you have only had one library but have lost access to it, it would probably do no harm to use this technique of selecting the enclosing folder, rather than the library.

  • Creation of developement class,package and access key

    COULD ANYBODY EXPLAIN about
    creation of developement class,package and access key
    and who will create them?

    Working With Development Objects
    Any component of an application program that is stored as a separate unit in the R/3 Repository is called a development object or a Repository Object. In the SAP System, all development objects that logically belong together are assigned to the same development class.
    Object Lists
    In the Object Navigator, development objects are displayed in object lists, which contain all of the elements in a development class, a program, global class, or function group.
    Object lists show not only a hierarchical overview of the development objects in a category, but also tell you how the objects are related to each other. The Object Navigator displays object lists as a tree.
    The topmost node of an object list is the development class. From here, you can navigate right down to the lowest hierarchical level of objects. If you select an object from the tree structure that itself describes an object list, the system displays just the new object list.
    For example:
    Selecting an Object List in the Object Navigator
    To select development objects, you use a selection list in the Object Navigator. This contains the following categories:
    Category
    Meaning
    Application hierarchy
    A list of all of the development classes in the SAP System. This list is arranged hierarchically by application components, component codes, and the development classes belonging to them
    Development class
    A list of all of the objects in the development class
    Program
    A list of all of the components in an ABAP program
    Function group
    A list of all of the function modules and their components that are defined within a function group
    Class
    A list of all of the components of a global class. It also lists the superclasses of the class, and all of the inherited and redefined methods of the current class.
    Internet service
    A list of all of the componentse of an Internet service:
    Service description, themes, language resources, HTML templates and MIME objects.
    When you choose an Internet service from the tree display, the Web Application Builder is started.
    See also Integrating Internet Services.
    Local objects
    A list of all of the local private objects of a user.
    Objects in this list belong to development class $TMP and are not transported. You can display both your own local private objects and those of other users. Local objects are used mostly for testing. If you want to transport a local object, you must assign it to another development class. For further information, refer to Changing Development Classes
    http://help.sap.com/saphelp_46c/helpdata/en/d1/80194b454211d189710000e8322d00/content.htm
    Creating the Main Package
    Use
    The main package is primarily a container for development objects that belong together, in that they share the same system, transport layer, and customer delivery status. However, you must store development objects in sub-packages, not in the main package itself.
    Several main packages can be grouped together to form a structure package.
    Prerequisites
    You have the authorization for the activity L0 (All Functions) using the S_DEVELOP authorization object.
    Procedure
    You create each normal package in a similar procedure to the one described below. It can then be included as a sub-package in a main package.
    To create a main package:
    1.       Open the Package Builder initial screen (SE21 or SPACKAGE).
    2.       In the Package field, enter a name for the package that complies with the tool’s Naming Conventions
    Within SAP itself, the name must begin with a letter from A to S, or from U to X.
    3.       Choose Create.
    The system displays the Create Package dialog box.
    4.       Enter the following package attributes:
    Short Text
    Application Component
    From the component hierarchy of the SAP system, choose the abbreviation for the application component to which you want to assign the new package.
    Software component
    Select an entry. The software component describes a set of development objects that can only be delivered in a single unit. You should assign all the sub-packages of the main package to this software component.
    Exception: Sub-packages that will not be delivered to customers must be assigned to the HOMEsoftware component.
    Main Package
    This checkbox appears only if you have the appropriate authorization (see Prerequisites).
    To indicate that the package is a main package, check this box.
    5.       Choose  Save.
    6.       In the dialog box that appears, assign a transport request.
    Result
    The Change package screen displays the attributes of the new package. To display the object list for the package in the Object Navigator as well, choose  from the button bar.
    You have created your main package and can now define a structure within it. Generally, you will continue by adding sub-packages to the main package. They themselves will contain the package elements you have assigned.
    See also
    Adding Sub-Packages to the Main Package
    http://help.sap.com/saphelp_nw04/helpdata/en/ea/c05d8cf01011d3964000a0c94260a5/content.htm
    access key used for change standard program.
    www.sap.service.com

Maybe you are looking for