Lost access to switch after upgrade to metro access image

Hello
After an upgrade of a 3400 ME switch image to metro access one (340x), the switch was reloaded. After that, the only way to access the switch is the console port. I am beginner with cisco switches but I managed to configure the switch to make an upgrade through TFTP. Now I want to configure port 0/1 on vlan access mode to vlan 1. Any help on this is more than welcome. Thank you.
Switch Ports Model SW Version SW Image
* 1 26 ME-3400-24TS-D 12.2(35)SE3 ME340x-METROACCESS-M
no aaa new-model
system mtu routing 1500
ip subnet-zero
no file verify auto
spanning-tree mode rapid-pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
vlan 10
name management
interface FastEthernet0/1
speed 100
duplex full
interface FastEthernet0/2
shutdown
interface FastEthernet0/3
no switchport
no ip address
no ip route-cache
shutdown
interface FastEthernet0/4
shutdown
--More--
interface GigabitEthernet0/2
port-type nni
interface Vlan1
ip address 192.168.1.252 255.255.255.0
no ip route-cache
interface Vlan10
no ip address
no ip route-cache
shutdown
ip default-gateway 192.168.1.1
no ip http server
cisco3400#sh int fastEthernet 0/1 switchport
Name: Fa0/1
Switchport: Enabled
Administrative Mode: static access
Operational Mode: static access
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: native
Negotiation of Trunking: Off
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Administrative Native VLAN tagging: enabled
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk Native VLAN tagging: enabled
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Capture Mode Disabled
Capture VLANs Allowed: ALL

I found the source of the problem. My switch was connected to another one. I had to explicitly put port type to nni.
Hope it helps someone.

Similar Messages

Lost music from iTunes after upgrading MacBookPro to OS X Yosemite

Lost music from iTunes after upgrading MacBookPro to OS X Yosemite. Has anyone had this problem? How did you re-import all your lost music? My iTunes currently only contains all of the music I have purchased from the iTunes Store but nothing that was burned to my iTunes. All of my music files still seem to be located on my hard drive within the iTunes folder but they did not re-import into the library during the upgrade to Yosemite. Thanx for your help.

Hi OrangeOAK,
Thanks for the question. If I understand correctly, you still have the music on the computer but need to re add it to iTunes. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Adding music and other content to iTunes - Apple Support
Adding content on your computer to iTunes
iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
Open iTunes
From the File menu, choose one of the following choices:
MacAdd to Library
Windows
Add File to Library
Add Folder to Library
Navigate to and select the file or folder that you want to add
If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
Thanks for using Apple Support Communities.
Have a great day,
Mario

Lost my favorite language after upgrading the firm...

After upgrading my nokia 6500 firmware to V 08.30, I've lost french in my phone settings.
Does someone can help me?
Solved!
Go to Solution.

please check the following:
/discussions/board/message?board.id=swupdate&thread.id=29982
Fear not those who argue but those who dodge

Excessive log switching after upgrading to RAC + DG

Hi everyone, I'm not sure if this should go in the RAC or the Data Guard section, seeing how I'm not sure which one is the potential culprit, but here goes:
I recently assisted in upgrading a database from Solaris 9i to HP-UX 10gR2 (10.2.0.4) using RAC and Data Guard (2 nodes). However after upgrading we noticed that there is now an increase in the redo log switches. We currently have 4 logfile groups for each thread sized at 100MB. Previously when the database was just a single instance, such a configuration was sufficient as we were only seeing 4 log switches per hour, max 8 at peak times. After the migration, this spiked up to around 40-60 log switches per hour, sometimes hitting 80.
The userbase/load of the database hasn't changed since the upgrade, we just migrated the database. Is this normal? Should I have to increase the redo logs after migrating to RAC + DG? I've implemented DG before as well as RAC, but not together so I'm not sure if this would be a factor, however I'm not totally sure if that line of thinking is correct. Any help would be much appreciated.

Previously when the database was just a single instance, such a configuration was sufficient as we were only seeing 4 log switches per hour, max 8 at peak times. After the migration, this spiked up to around 40-60 log switches per hour, sometimes hitting 80. Are all the ArchiveLogs actually 100MB each ? If Oracle has to switch logs more frequently, it doesn't necessarily mean that more Redo is being generated. Check the volum of Redo. (e.g. from v$sysstat, from StatsPack, from AWR, from V$ARCHIVED_LOG or by just listing the ArchiveLog file sizes)
Hemant K Chitale

Lost saved mail messages after upgrading to OSX Mavericks

I rencently noticed that after upgrading to OSX Mavericks I have lost all of my saved messages from before that date, messages mainly from my gmail account that is syncing with Mail. I have also noticed that the same messages are now missing when I log into Gmail and look for them there.

HI,
I also use IMAP and the "folders" I create in the Mail App are actually created on the IMAP server.
My Mail side bar looks like this:-
Between the INboxes and the Google folders are the Smart Mailboxes (Today) and the On My Mac line which is current closed/hidden.
I have a bunch more folder that are On My Mac in here.
I went the Google Mail Web page the other day and was informed that there was a New Inbox.
I also received an email about it.
It appeared to happen just as I logged in to Google.
I not sure it this was coincidence or the trigger.
8:39 pm Monday; November 11, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Lost Ability to Scroll After Upgrading to Firefox 6.0.2

I've lost the ability to scroll using my mouse (touchpad on a Lenovo T400) after upgrading to Firefox 6.0.2. I still have the ability to scroll in every other application (IE, Word, etc.) and previously had the ability to scroll in the prior version of Firefox. I'm operating Windows XP and have already checked to make sure my mouse settings are correct. Any suggestions on how to fix this?

Flash does not appear in the plugins list. It works fine in other browsers. /Library/Internet plug-ins/Flash Player.plugin and flashplayer.xpt exist. I can't find the flash plugin elsewhere (profile/plugins, in the App package)
I created a new profile to test if the profile was at fault. The plugin still did not load. Firefox finds the plugin but in [profile]/pluginreg.dat it adds it under [INVALID]:
[INVALID]
/Library/Internet Plug-Ins/Flash Player.plugin:$
1315562441000:$
/Library/Internet Plug-Ins/flashplayer.xpt:$
1314065602000:$

HELP Just lost ALL iCal calendars after upgrading to 3.1 !!!!

Hello everyone
I just lost ALL my calendars on both my mac and iphone after upgrading to 3.1
5 years just disappeared!!!!
What can I do to have them back?
PLEASE HELP

This happened to me as well.
All of my non-subscription calendars are gone.
I did nothing and then gone.
PLEASE HELP

Lost all purchased songs after upgrade

Hello does any one what to do when all your itunes purchased songs disappear after upgrading ?

You can contact the iTunes store and they MAY allow a redownload. However, when you purchase music it is up to you to back it up since you pnly get one download. To connact them go to:
Apple - Support - iTunes

After upgrade to Lightroom 5, image is blurry for a sec after any adjustment

Hi everyone. After upgrade to Lightroom 5, after any adjustment in Develop module, image is a little bit blurry for a while. It looks like the Lightroom is rendering stuff after changing exposure, contrast, vibrance or anything else. Blurrying is visible while moving a slider. When position of a slider is fixed, it takes a sec to render the image. I have no such thing with Lightroom 4.4 (or any previous version), so for now I go back. I reproduced this weird behaviour even with a new catalog, created with LR5 to be sure it's not related to upgrading my existent catalog.
My computer is MacBook Pro 17" (Early 2009) with Core 2 Duo 2.93 GHz, 8 GB RAM, SSD, etc. I use up-to-date Mountain Lion.

IMHO, this is related to this issue :
http://feedback.photoshop.com/photoshop_family/topics/second_monitor_initially_not_renderi ng_image_clearly
The bug takes multiple forms but has probably a single root.

Lost airport base station after upgrade

I started the airport utility which noted that there was new software for my base station available, which I downloaded and installed. After that I lost my base station... I have a Thomson router which got immediately corrupted as well. Now I have to choose between the Thomson or the Airport. I can't have them at the same time.
Anyone a suggestion ??
thanks in avance
Airport purchased 3 weeks ago...

I left the base station unplugged for the whole night.. as soon as I plug it in I loose my complete network and I can't access the base station to change the settings. I have to unplug it again and restart my ADSL modem to get my network up again.
This is very frustrating, espacially because averything worked fine before my upgrade..

Lost "Shared" in Finder after upgrade of 10.5.2

I have 2 Window computers that are networked as well as my MacBook Pro.
Prior to my 10.5.2 upgrade I could see and access those other machines and their files.
Since the upgrade the "shared" folder does not display in the Finder sidebar.
I have checked Finder preferences and all the appropriate boxes are checked.
Any suggestions out there?
Also, after doing a Archive and Install, is it OK to delete the "Previous System" folders that are created?
Thanks in Advance

Hi, I found Terminal commands within this section of the forum, on page 3 or 4. I don't give them out because I am not familiar, nor comfortable working this deep in the system. You can reset Finder, New Finder window, and try commands.
Ray

Has anyone else lost their iTunes app after upgrading to ios7

When upgrading to iOS 7 I lost everything and had to start from factory settings on my ipad2. I've recovered everything except the iTunes app. I have an app named "Music" and I have the iTunes Store app. I tried going to Ap Store to download it and it states that iPads already come with iTunes... Well mine's gone after the upgrade. Does anyone have suggestions?

Check in Restrictions... Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213
If no joy...
Settings > General > Reset > Reset Home Screen

Lost my E: drive after upgrade to mountain lion

Hi,
I upgraded to Mountain Lion today and everything looked ok. However when I booted into windows 7 (boot camp), I found my E: drive missing.
Earlier with snow leopard, windows 7 would show me the following drives
(BootCamp) C:
(DVD RW Drive) D:
(My Data) E:
(Macintosh HD) F:
Now with mountain lion, windows 7 cannot find E:
A screen shot of my computer management window is below and it shows my earlier E: as unallocated.
Can I get my E: drive back?
Thanks in advance.

After trying to rebuild my data for a month, I have got it all back today. Luckily I didnt need the data during this time. Ok below is the solution for others who find themselves in a similar situation.
Recap...
When I had Snow Leopard, I installed windows 7 with bootcamp. Within windows I resized my windows partition and created a new drive E:\ for my data files, Every thing was great and E:\ has all my data from over last year and a half. Also had set up my backup schedule to run once a week.
December 20th 2012 - D-Day
I upgraded to Mountain Lion and the OS worked great. However when I booted into Windows 7, my E:\ has disappeared and my computer management widget shows an unallocated block where my E:\ once resided.
You can see screenshots of my partitions in both Windows 7 computer management and Mountain Lion Disk Layout in my posts above.
The Solution...
Looked for data recovery solutions online and homed in on EaseUs Partition Master at http://www.easeus.com/partition-recovery. Installed the free version in windows 7 and ran the Data Recovery ->Partition Recovery Wizard -> Search all lost files automatically.
It took a while, about 3-4 hours, but after that I could not believe my eyes when I saw my entire folder structure with all my files from my missing partition.
However the free edition only recovers 1 GB of data, so I went ahead and purchased it for $69.95.
This software does not recreate the partition, but allows you to restore the lost files and folders to an existing drive. It also warns you not to select the same disk as destination as it may overwrite the space used by the lost files thus preventing 100% recovery. So I went ahead and recovered the files to my pen drive.
Now I had to recreate the partition from the unallocated space in Windows7 computer management screen. But then I would again face this problem when upgrading to Mac OS X 11 in the future I will have to redo these steps again. So I decided to configure the partition in OS X rather than windows 7 and format it as FAT.
I went ahead and created the partition in OS X and Quick formatted it as FAT. When I created the partition, I was warned that this action could possible affect my boot record (or something to that effect). I ignored it and went ahead.
A new problem surfaces
Now when I restart the MAC, windows 7 is missing from the list of bootables. But the solution to this turned out to be very simple.
See Christopher Murphy's detailed explanation in the discussion here https://discussions.apple.com/thread/4144252?start=0&tstart=0. I just read through the 1st few posts on this discussion to restore the windows 7 bootable option when restarting.
To conclude
Thanks Christopher Murphy from the other discussion for help on the 2nd half of the problem.

Celullar Data Lost or "No Service" after Upgrade iOS 8.1

Hello all member,
I've been using iPad4 for about 8 months.
This problem happened after I upgrade to iOS 8.0.2, after I upgraded to ios 8.0.2 my phone signal started "no service".
FirstIy, I think there is a problem with my sim card, and then I've replaced with some other sim card. But the problem still not solved.
Second opinion, i tried to Reset >> Network Setting. But the problem still there.
Last option, i tried to Full Reset but still find my celullar is "No Service"
For about 3 weeks, I get notification for iOS 8.1 and I upgraded it last night.
But the problem still exist, my cellular data connection still "No Service".
Is there anyone here who can help me?
Thanks for all advice.

I upgraded ipad mini 2 with LTE from 7.1.2 straight to 8.1.2 hoping all the bugs are ironed out by now.... nope!
Got the free 200MB/mo Tmobile sim and 4G works. LTE network connection seems fine. I get an LTE next to Tmobile on the status bar. But I get a message saying "Could not activate cellular data network. You are not subscribed to a cellular data service." as soon as I try to use a browser.
With AT&T sim, 4G works just like Tmobile, but as soon as I switch on LTE, there is no network connection at all with "No Service" on the status bar and falls back to 4G after a while. So seems like something broke LTE even on 8.1.2.

Help! Optimus automatically switching after upgrading to windows 8

Hello,
I have a Lenovo u460 laptop that has NVidia 305m+hd 3000 switchable graphics.
I recently upgraded to windows 8 after taking the advice in this thread:
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Upgrading-to-Windows-8-Lenovo-u460/td-p/112...
Now, whenever I try boot into windows, my screen keeps flickering after the boot screen. Its not a fast flicker, its the type of flicker that occurs whenever you would normally hit the optimus button. It's like the optimus button is being toggled continuously. As a result, I'm never able to reach windows!
I can change the graphics settings to discrete, and then I'm able to go into windows fine. But it forces me to use the NVidia card which is a battery drain. I would much rather only use the intel card than the NVidia one.
What do I do?

I have the same problem - my data had better not be gone! Why won't Apple address this problem?

Lost access to switch after upgrade to metro access image

Similar Messages

Maybe you are looking for