Lost Airport Internet Connection

My wireless network/internet connection is no longer working and Applecare is telling me they are not allowed to assist b/c of legal issues with internet providers, so I'm hoping someone here can help me?!
I use my iMac as a base station for my MacBook Pro to connect to the internet using the Airport and it is no longer working.
My iMac is connected to cable modem (Best Data CMX300V2) through Ethernet and the internet connection is working fine, however the triangle airport icon at the top right of my desktop is now gray with a box inside it. When I got into System Preferences>Network, the iMac Airport is ON, but now saying "AirPort has a self-assigned IP address and may not be able to connect to the Internet".
When I go into System Preferences>Network, for the MacBook Pro Airport it says it's connected and lists an IP address, but I have no internet connection. The MacBook Pro also has that gray triangle airport icon with the box at the top right of my desktop. I used Airport Utility to try to find the base station, but it was unsuccessful.
What is happening here?

Alright if your in desperado helpo then you will want to try and listen to this.
The MBP is built by ALUMINUM it's brushed and the metal screws have that problem with wireless. sometimes it will happen. I have both and that happends to me too. What I do is that your going to just have to go to the wireless sign and then click on Interfearence Robustness. If you do that. It should help more.
If you still have wireless issues try downloading APPLE CARE on your widgets. That always helps and that is where I usually go before I come to here for help.
I hope my info works.

Similar Messages

  • Lost Airport internet connection between G5 and G3 iMacs

    I hope you don't mind, I posted the following in internet etc. but not much traffic there...
    I'm doing this from memory as not in front of either iMac. I have until now had a simple wireless internet connection as follows: G5 iMac connected by ethernet to broadband supplier which shares internet connection via Airport. This is picked up by an ethernet wireless router connected to my G3.
    This has stopped working over the weekend. G3 had an amber light in network status (static DHCP address or similar) but that has now gone to green and 'connected to the internet' etc.
    The internet sharing control on the G5 has full signal strength but seems to have difficulty checking status - revolving petal thingy below signal strength. But occasionally does settle on 'status fine' or similar.
    Now the G3 fails to connect to the internet, G5 works just fine.
    No settings have been knowlingly changed and all seem to be correct. There was a power failure for a couple of hours last week, don't know if this is related.
    Thank you very much for your help.

    Darrin, just back from Montreal and glad to see that great minds think alike. Often, in fact usually, problems with airport connections can be solved by rebooting the router/airport. For no apparent reason, they often go all funny, and this usually takes care of the problem,
    anyway, glad you are back up and running,
    Miriam

  • I was downloading some songs when I lost my internet connection. There is no sign that these songs reached my iTunes but i have been charged for these songs anyway. What should I do?

    I was downloading some songs when I lost my internet connection. There is no sign that these songs reached my iTunes but i have been charged for these songs anyway. What should I do?

    It's possible that the message you got was to update the AirPort Express Base Station's (AX) firmware...and that something might have gone wrong during the upgrade.
    Let's start by performing a "factory default" reset on the AX to get it back to it's original "out-of-the-box" condition.
    Then, let's set it up to work with your cable modem...
    AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
    Modem/Router Power ReCycling (optional)
    - Power-off the Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AX; Wait at least 5 minutes.
    - Power-on the computer(s)
    Setup the AX
    With the network components powered down, set up the AX, using the AirPort Admin Utility, either connect to the AX's wireless network or connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Do not, at this point, set up any security (i.e., WEP/WPA encryption, closed network, etc.) to first make sure the AX is operating properly. Try to access the Internet wirelessly with your MacBook. If you're successful, go ahead and add any security features you wish.

  • HT5573 While  updating my laptop i lost my internet connectivity. when i tried updating it again ,it shows network error. what i am supposed to do?

    While  updating my laptop i lost my internet connectivity. when i tried updating it again ,it shows network error. what i am supposed to do?

    Delete and recreate your settings in the Network preference pane. If you're connecting to a wireless network, also delete the AirPort network password(s) in the Keychain Access application.

  • I lost my internet connection and the IP address is in correct. How do I fix it and change the IP address

    I lost my internet connection. This is the second time and really FRUSTRATED. The first time I had to call geeksquad and spent $100. I don't want to call them again. I'm getting the IP address as 169....It should be 192..How do I fix thos problem. It seems many people are experiencing the same problem. It's quite disturbing.
    Please help

    Hi there Julia,
    Ahh The iPhone isn't "stupid" it's been called "stupid" because you are frustrated at the situation , but try
    Load iTunes. Backup your phone. Make sure it is backed up !! Run restore. This will get rid of the error! And please what ever you do , do not skip the back up!
    Thanks,

  • I was lately downlaoding a 700mb file, but i lost the internet connection and i have the .part file and i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the begining?

    I was lately downlaoding a 700mb file, but i lost the internet connection and only 635mb was downloaded and i have the .part file but the download menu says that download failed so i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the beginning?

    I do not know if your file can be recovered.  But I may be able help you to recreate it with ease.  If you will settle for a composite where all image are re-sized for a particular tile size and virtually cropped to its aspect ratio.  However all source image need be gathered into a folder to use my script process. Paste Image Roll Script and Picture Package Support  Link  http://www.mouseprints.net/old/dpr/PasteImageRoll.jsx

  • If I leave the laptop alone for 15 minutes, when I come back I have lost my internet connection

    I have been using firefox for about two months now without any problems. With in the past two weeks, if I leave the laptop to do something else, when I return to the laptop and go to check my E-Mail etc. I lost my internet connection. I check and says I have an excellent wireless connection but I am forced to re-boot and then I'm back on. "WHY"

    What kind of documents? Office? iWork? Text Edit? What version?
    What settings do you have in regards to power saver and/or screen saver?
    For these kinds of system glitches I always recommend installing and running Onyx 'Automation'. If that does not work you should reinstall the offending software, if possible.
    Onyx - http://www.titanium.free.fr/download.php?sid=d1caebc01e3207556c6d75791305ccf2

  • I am trying to restore my phone from iCloud and it continues to say that I've lost my internet connection (which hasn't happened) and it wont restore the phone!  Any suggestions????

    I hate this process it takes forever and 5 times now it has said that it's lost the internet connection.....  I even tried keeping the screen active the whole time as well.
    Any suggestions?

    Any luck?  What did you end up doing?

  • VPN lost my internet connection ?

    Hi everyone
    One question about VPN, when connect through VPN to my Work everything is ok execpt that a lost my internet connection and i can't browser the internet outside VPN.
    any clue
    Thank

    is your network adapter you use for VPN configure to use remote gateway? it's in tcp/ip settings of adapter advanced. if you have a proxy or firewall it may be blocking, typically I turn of this and if a user wants to browse internet while on VPN they
    use their own connection. Some companies prefer to use gateway on the vpn network for security reasons.

  • Completely lost all internet connection on brand new MacBook Pro

    2 week old 2011 17-in MacBook Pro, running Lion (factory installed). I should note that this is my first Mac, so I'm still learning my way around, however it's highly unlikely I did anything to cause this to happen.
    The problem is pretty simple - I have lost all internet connectivity no matter what method it's connected. I have tried it on my company network via ethernet, and several different WiFi networks. All connections are recognized as connected, but I cannot make any outside connection.
    We've rebooted networks servers, rebooted/shut down the Mac, re-checked all of the network settings - everything is what it should be.
    Everything literally was working perfect one second and completely lost the next.
    Any help would be greatly appreciated!
    Thanks in advance.

    Call Apple tech support line, You have 90 days of free telephone support: http://www.apple.com/contact/

  • I lost my internet connection on my airport extreme and can't reconnect

    After a power outage I lost my network connection and my base station  and I can't reconnect. I don't know what to do. I went to airport utility but it can't find my devise. What am I doing wrong?

    Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Extreme.
    Power down both the Mac and AirPort Extreme, then restart them.
    Open AirPort Utility to see if communciation has been re-established.
    Once  you have made any adjustments and Updated,  you can disconnect the Ethernet cable.

  • Airport internet connection problems in OS X but not in XP or iBook

    I have an iBook and an iMac, and the iMac has Leopard and XP on it. When in Leopard, most of the time, the internet connection is extremely slow and can never load a full page in Safari, always quitting halfway or the connection drops completely.
    When I go into XP, the internet connection is perfectly fine and there are no speed issues and the connection is never dropped.
    When I use my iBook, there is also no connection problems.
    The crappy internet connection also affects Mail in such a way that I cannot quit Mail or Shut Down (until I force quit Mail).
    I called apple the last time this happened and their solution fixed it, but the problem is back again.
    Does anyone know how to fix this, or does anyone know if there is something wrong with my Airport?
    (Its an aluminum iMac, 2.4 GHz running 10.5.7, and not using the Beta Safari)

    Hello, I don't think I can help, I do have 10.7.3 & W7 Ultimate, but I run W7 in Parallels...
    http://www.parallels.com/
    And it uses Shared Networking of OSX.

  • Lost Intermittent internet connection and functions

    Suddenly, Friday of three day Memorial holiday iPhone internet connections are off or down. Can no longer do search using Bing, Google or Yahoo. Debug Console "No Errors" Error I get is "Cannot open because server stopped respondig." I have had times could not connect to YouTube ( I now appear to have lost YouTube favorites that were there yesterday.  iTunes and App Store connections fail. Yahoo weather and the weather channel has also failed. AP and My Yahoo have failed. Facebook and Pandora have almost always worked, well I think Pandora failed once. I checked Carrier, I never changed anything like this and all are correct.I do not see DNS options.I have had this 3G Version 4.2.1 for years now without this problem. I did not travel out of country in fact have not left present location. I may have deleted a Datatbase in Safari that were old. I reset Network connection, shutdown phone some things may work for a while but there are still features in Safari that fail such as search. Did I pick up Malware> Can I clean it? What can I do?

    Have you tried resetting your phone, not turning off but actually resetting it by holding down the home button and the lock button until the apple logo appears?
    I've been having similar issues too since installing 5.1.1 on my 4s, playing with network settings, unsetting reetting data, turning off / on again didn't do anything, but Hard reset the phone and it started working again! not sure what it does differently from turning off, but try it!

  • Lost my internet connectivity in my HyperV machines when updating to Windows 10 Preview 10061

    Hi,
    Windows 10 TP forced me an update to 10061 and this update caused me to loose my internet connectivity in my HyperV machines. I was sharing my wireless connection with an internal Virtual Network Adpater.
    Right now I've tried everything. I mean really everything...and no solution.
    Its probably another bug from this version but it has a huge impact to whoever is working on development in VM.
    Is there any solution at sight? I can't connect the phisical network BTW because I have no access to one where I work.
    Thank you

    There are many phases for update, it first check version of your Windows Phone and some additional information and then based in details, it will start downloading the required update file. During these checking you will need internet connection and if internet
    connection lost, then the process will stop and you could resume it later and either it will continue or it will restart doing what it been done but it won't bring any harm to your device. Once download is completed, it will start installing the update and
    you won't need internet connection while it is installing and after installation been done it will recheck for additional update and you need internet connection.
    In general if you suddenly disconnect from internet, it won't bring any harm or damage in your PC and you could resume and continue once you get back your connection. During upgrade , it is important to make sure your device is fully charged, if your phone
    suddenly turn off during upgrade process, there might be some problems in some cases.

  • Airport / Internet Connection

    All my friends said I would love my MacBook Pro but I feel like throwing it out the window. It won't connect in coffee shops etc and will only sometimes connect on our wireless network at home which is broadband - basically it is totally inconsistent connecting to the Internet. It will generally only connect to our home network and usually only if it is the first computer to connect to the wireless network after we restart our wireless modem router. However, sometimes even this doesn't work. Then I manually try to use Internet Connect to connect and that never works and asks for passwords when we don't have a password protected wireless network at home.....I am going nuts!!! Please advise.

    I would recommend the AX be reset to its factory default condition, doing so while the modem is unplugged from the power. After the reset, connect your AX directly to your computer using an ethernet cable and configure the AX manually using the AirPort Admin Utility (not the AirPort Set-up Assistant). Name your base station, and give it an administrator password. Name your network and give it a password. Set your preferred security option. Set the AX up to Connect using Ethernet (if cable modem), or PPPoE (if dsl, also fill in any account information). Allow the AX to Distribute IP Addresses via DHCP. Apply the changes and disconnect the ethernet cable from your computer, plugging the cable directly into the modem ethernet jack. Power up the modem. You should be able to connect.
    A couple of more things:
    Your modem output must be ethernet, not usb.
    Your computer should be set up to receive its IP address via DHCP (System Preferences>Network). In the Network preference pane, make sure PPPoE is disabled.
    These instructions assume you are not using PPPoA as your connection protocol.
    Your modem is a pure modem and not a modem/router combination.
    You do not have another router in your system.

Maybe you are looking for

  • Error message while saving the sales order

    hi all, i have maintained a material material master, sold to  etc  pr00 conditions maintained, schedule line is determined correctly  but i am still getting this message while saving the order "Product 234345 does not have schedules assigned. Contac

  • My screen is not resounding and my sleep button is broken

    A few months ago the sleep button on the top of my iPhone 4s stopped workng so I set up a quick button on my screen that I can put it to sleep with. Now my screen is not working, only that quick button is working. Help!

  • SQL*Loader-350: Syntax error at line 1.

    I am getting an systax error saying : SQL*Loader-350: Syntax error at line 1. Expecting keyword LOAD, found "ï". What could be the prob ??

  • ITunes corrupting video files on metadata changes

    I have some video tutorials that I've been attempting to add to my iTunes library so I can watch them on my iPhone and appleTV. The videos copy into my library successfully. They play fine on my mac / phone / aTV as long as I don't change any metadat

  • How to "save as" in Preview?

    I recently upgraded to Mountain Lion, which apparently has also resulted in changes to Preview. Now there is no "save as". How the heck am I supposed to save an altered copy of an image? I don't want to save the alterations on the original image!