Lost all contents and settings during 'routine' update to v1.1

Hi all,
Not too sure what went wrong, but I lost all settings and data during what I thought would be a routine firmware update.
In the middle of the update, the phone hung, and the PC gave me the error message that it needed to restore to what turns out to be factory settings. All settings, data, notes and pictures were gone! (no warning given!)
Since I didn't have a chance to download these before I got started, I'm not too sure what to say - if you see a way of backing up your phone before you update the firmware, I'd recommend that you do it.
I've updated a lot of firmware in my life - I'd have to say this is the worst and the first time ever that I've lost data.
In case anyone from Apple monitors this site - is there a way to seperate the data and the firmware area, so that if this kind of thing happens, you only wipe the firmware area?
The phone even initially told me I had to re-register and only offered me a way to make an emergency call ...
-R

Have you docked your Iphone in before updating? If so your contacts and settings should be saved. Yes your picture's are going to gone because you have to manually save them. According to this post http://discussions.apple.com/thread.jspa?threadID=1069906&tstart=0 it looks like the activation is down with ATT so this is why you are having problems getting all your contacts and settings and having to reactivate.
Message was edited by: XFaega

Similar Messages

  • HT201274 My iPad is currently on OS version 7.1.2 and has not been upgraded to 8 yet.  If I do an "Erase All Content and Settings" will iTune force an upgrade to 8?  I would like to keep the device at 7.1.2.

    My iPad is currently on OS version 7.1.2 and has not been upgraded to 8 yet.  If I do an "Erase All Content and Settings" on the device will the device be forced to upgrade to 8 ?  I would like to keep the device at 7.1.2.

    To Perform the Erase All Content and Settings directly on the iPad it does not need to be connected to a computer.
    In fact yes, is better if its not connected to one, but simply connected to its charger, and have it plugged in. Erase All content and settings, will not update the iOS.
    If you restore the iPad using iTunes on your computer with the iPad connected, then it will update to iOS 8. Because the restore will place the newest available iOS version supported by the Phone on it.
    Basically disconnect the iPhone, plug it in to its charger, and the charger to the wall, and then on the iPad go to Settings->General->Reset->Erase all Content and Settings.  This will wipe clean the iPhone but will do nothing to the underlying iOS installation.
    Once everything is removed, you can plug it into iTunes and sync your content back.  Do not attempt to restore from backup while connected to iTunes, as it will update the iOS version in the process. Simply sync and you should have no issues.

  • HT4061 i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?

    i have a iphone 3gs and recently I Erase All Contents and Settings, now my phone is asking me to update to itunes but when I do it comes up with the message...error 10.15, can someone please help?

    Your headline says iPhone 3GS, but your text says 3G.
    iPhone 3G is not compatible with iOS5. 3GS is.

  • TS3694 So I have an iphone4g in recovery mode. followed all the steps to the T. Error pops up in itunes 1602. Prior it was powered off during erase all content and settings mode waiting to reboot

    So I have an iphone4g in recovery mode. Followed all the steps to the T. Error pops up in itunes 1602. Prior it was powered off during erase all content and settings mode while waiting to reboot. Now its back to the apple logo. Any ideas if powering it off during the erase all content damaged the software?

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • Reset all content and settings to my iPhone, and when it tries to reboot it freezes up during the rebooting process, any suggestions?

    Reset all content and settings to my iPhone, and when it tries to reboot, it freezes up during the rebooting process, any suggestions?

    Read http://support.apple.com/kb/ht1808

  • I recently "Erased all content and settings" on my iTouch and during the reset, it ran out of battery and it has been the apple logo and a loading symbol on the screen for 2 and a half days now. What do I do?

    I recently "Erased all content and settings" on my iTouch and during the reset, it ran out of battery and it has been the apple logo and a loading symbol on the screen for 2 and a half days now. What do I do?
    I did drop it from about 4 and a half foot during the reset so I don't know if that has broken it.

    See if placing the iPod in Recovery mode will allo iTunes to see the iPod so you can restore it.
    Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • How to find my lost iphone4 if someone erase all content and settings ? there is way to find my iphone with serial number ?

    how to find my lost iphone 4 if someone erase all content and settings ? there is any way to find my iphone with serial number or any other number to find it ? plese answer my 

    Answered here:
    https://discussions.apple.com/thread/5934691?tstart=0
    No matter how many times you ask, the answer still remains no.

  • How to find my lost iphone4 if someone erase all content and settings ?

    how to find my lost iphone4 if someone erase all content and settings ? there is way to find my iphone with serial number ?

    No. However, if your phone was running iOS 7.0 or higher, whoever erased it won't be able to re-activate it without knowinh your Apple ID/Password. Called Activation Lock, & the phone will be useless to whoever has it.

  • Does Erase all contents and settings in 2.0.2 wipe the firmware updates?

    I am about to sell my ipod touch on ebay and to ensure that all my data is cleared I have used the erase all contents and settings option that 2.0.2 introduced. The question is does this return the touch back to the factory firmware (1.4 I think), unable to check without starting to sync new device to itunes again.

    I believe that option has been available since earlier firmware versions. My understanding is that it does not affect the software/firmware on the iPod. From what I've been told, once the iPod is updated to 2.x.x it is not possible to go backward to a 1.x.x version. If anyone's been able to do this successfully, please correct me. You should be able to hold 'Shift' when clicking Restore in iTunes, so you might try that to see if 1.1.4 is an option to restore the iPod to.
    CG

  • I gave my ipad 2 to my brother last month. After that he erased all content and settings, sign in with his apple id. The next day until now, I found out that I can not udpate my apps both on my iPhone and iPad Air. What should I do? Thank you in advance.

    I gave my ipad 2 to my brother last month. After that he erased all content and settings, sign in with his apple id. The next day until now, I found out that I can not udpate my apps both on my iPhone and iPad Air. I had create new apple id, change my password, delete the icloud acc. But still I can not update my apps. I have many of red notifications on iPhone and iPad Air. What should I do? Thank you in advance.

    1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
    2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
    Is your iPad working?

  • Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.

    Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.  I have used itunes to restore and also recover.  Device will actually shut off and stay shut off if I leave it connected to the computer.  The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not.  Just cant get it to completely shut down unplugged.  Any thoughts?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
      - If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
    Apple will not help since you worked on the iPod yourself.

  • HT201274 Tried to erase all content and settings...now it won't do anything

    I have a first generation iTouch and last night I selected to Erase All Content and Settings. I wanted to wipe it because I'm switching to an iPhone. The iTouch didn't have much charge so I started charging it while it was doing it's thing. Unfortunately, the iTouch doesn't do anything. When I hold down the power button, the white apple logo appears. It's been on a charger for several hours, too. When I plug it into my computer and open iTunes, the computer doesn't recognize the device.

    Try connecting the device to iTunes in recovery mode and restoring it. See this article for instructions on putting your iPod into recovery mode.
    iOS: Unable to update or restore
    B-rock

  • Really how secure is the current erase all content and settings?

    I am not sure about taking my iPhone in for repair or exchange after reading many old articles about how unsecure the erase really is, seeing how many sensitive passwords and e-mails I have. I have the most current firmware. So tell me, how reliable for keeping my data safe and gone is the current "Erase all content and settings" feature?
    Also note: I have iPhone 3g, not later or earlier. So I am not sure if the hardware would make a difference, but yeah.
    Message was edited by: nkcrcr

    It is what it is. Erase all contents & settings overwrites user settings and information, writing a series of ones to the data partition. This process can take several hours, depending on the storage capacity of your iPhone. During this time, the device displays the Apple logo and a progress bar. If you had a 3GS, it would be instantaneous, as the 3GS supports hardware encryption. Can someone still recover data? Yes. But the software & equipment necessary to do so is very expensive & generally only available to law enforcement.

  • Is it possible to hide "Erase All Content and Settings" using Apple Configurator?

    How we can hide "Erase All Content and Settings" button from iPod devices using Apple Configurator? we have purchased these devices under enterprise deployment.

    not at all. for the moment we handle this problem by writing an image everytime we (think we) have to update the itunes u content. an update becomes necessary when users give us the iPad back and we recognize that there is good new stuff on it or whenever colleagues tell us to do so.
    With a new rollout of this image we offer new itunes u content on our iPads.

  • How to Erase all Content and Settings and keeping IOS 7.06?

    I'd like to participate the iPhone 5 Sleep/Wake Button Replacement Program, however than I'll have to Erase all Content and Settings and I'm afraid I'll loose IOS 7.06.

    If this is anything like standard warranty service, the unit you get back will be totally refurbished, which also means having it updated to the latest iOS release. The caveat in the program description hints this:
    Note: If your iPhone 5 has any damage such as a cracked screen which impairs the replacement of the sleep/wake button, that issue will need to be resolved prior to the sleep/wake button replacement. In some cases, there may be a cost associated with the repair.
    Also important to ask, does your phone have a faulty button in order to qualify for the repair?  They also clearly state:
    Apple will replace the sleep/wake button mechanism, free of charge, on iPhone 5 models that exhibit this issue and have a qualifying serial number.

Maybe you are looking for

  • Help on how to assign a field as mandatory in MIRO and name of user exit

    Hi all, the requirement is... In MIRO,the Incoimg invoice should not be posted without an empty field of amount(WRBTR) in the Basic Data.Currently as per std,it's not a mandatory field and can be posted by not entering any amount in that.So, either w

  • Maps not working after 10.3.2.440 update

    My Z10 was recently updated with ATT's 10.3.2.440.  Since the update, "Maps" isn't functioning properly.  When opened, I can see the map, with my present position, but I'm unable to search for anything or to plan directions.  The app displays "Conten

  • Bdc control views

    hai,     i have a problem in selecting views for multi user run,i will explain here,while recording a transaction in bdc for example take mm01 transaction when u record first u will be selecting the views which u need for the data batch process run s

  • Service Center 2012 R2 Web Portal

    Hi All, We are trying to deploy a web interface for Service Manager 2012 r2. We will be using it as a standard ticketing system. We don't want to deploy it in our Sharepoint 2013 environment and was hoping there is a way to set it up as a standard we

  • I'm on a PC and cannot get the menu bar up (0n the screen)?

    I followed the directions (of apple) but still can't get the menu bar up on my PC