Lost all links, connections and entire project.
Been working on SP4 for quite a while with no issues ever. But this latest happening is driving me MAAAD!!!!
I've updated to from 4.0 to 4.2.1 and now the new version reads the project fine but when it 'opens' the project nothing shows up. Not the tool windows, menu or viewer windows, templates windows... nothing at all.
All items on the menu bar are greyed out, so I can't select any function.
However, the application works fine when I start a new project.
I'm working on a dual 2.0 Ghz G5 and never ever had a glitch.
I've reinstalled the older SP4 version 2.0 in the hope that the project would come back, but I had no luck. It reads it fine but when it opens the same thing happens with nothing working and all commands in the menu bar greyed out.
I'd be most appreciative if someone can help me out recover a lot of hours of work.
Thanx
Thanks for your reply.
Unfortunatelly your suggestion hasn't worked.
I started again with this dual layer dvd and half way through i've lost the whole project again!
What seems to be happening is that the project file gets corrupted at some stage when I close the program. After I've closed the program a window telling me that the DVDSP closed unexpectedly pops up, it also asks me whether I want to send a report or not.
Next time I try to open the project it loads up fine but nothing shows up.
However when I open DVDSP clicking on the program icon, it opens fine with all its windows into place. When I try to open the project file from within the app, the same situation appears.
I've tried to open the file both on a G5 and on a MacBook to the exact same result in both situations.
If anyone has a witty suggestion I'll be more than happy to try it out.
Similar Messages
-
TS1398 Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi
Updated to ios6 now lost all wifi connection both iPad and iPhone no longer connects to wifi
not much response in here which surprises me...
Anyway... AS I am still looking for answers, I will share a couple of points that I realised...
in Airport Utility, I noticed that my iphone MAC address was actually showing as client connected, despite my phone network showing the spinning wheel next to the network name for ever and never actually connecting.
I am currently testing the router mode in Network to be on DHCP and NAT mode with a range from .2 to .200
My phone is now connected....
Everything seems to be ok and happy so far...
strange that this router and phone have worked together for at least a couple of years, the phone works everywhere else, and all other toys connect to my WIFI just fine. the list is as follow:
airport extreme
Zeppelin air
2x apple tv
2 ipads
iphone 4s
2 mac
1 pc
I have litterally just hard reset the router with a pin just now as a last resort... same...
I will leave the router as DHCP & NAT until a potential firmware or OS update... -
Since my internet connection went down I've lost all my bookmarks and history. When I try and save pages to Bookmarks I'm unable to. I've also lost some of my taskbar items
Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
The F10 can also be used on most PC's to temporarily reveal the Menu bar.
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing -
Since updating to latest operating system both my wife and I have lost all bluetooth connectivity. What to do?
Hello there, Jim111251.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
As iMac user upgraded to Mountain Lion lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????
Please provide more details. What version OS X were you using?
Are you saying that Mail faIled to upgrade and you lost your old mail?
Are you asking about PowerPC applications that require Rosetta to run like AppleWorks and Microsoft Office 2004? -
'Vintage' MacBook has lost all wifi connection suddenly and stored settings. I've tried to manually input my IP address and DNS number but it just times out when trying to connect to the network can anyone help?
You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download: -
I left my I phone connect to the ITune few hours and it looks like I lost all the info and now I can't activate it..Any suggestion?
Is it still charging if you connect it to the adapter? If yes, let it charge for about 10min, then connect to your computer in recovery mode, explained in this article:
iOS: Recovery mode -
my pc crashed and i lost all my pictures and music that was stored on the pc. now i have a new pc and when i log into itunes all my music and photos are not available. I guess i dont understand the pupose of itunes and its worth. I thought it backed up all my photos and music, but apparently not. So what do I use so that when i lose data on my pc i can retrieve it again at a later date or after a crash?/
Your content will only be where you put it. It has always been very basic to always maintain a backup copy of your computer.
You can transfer itunes purchases from your iphone: File>Device>Transfer purchases.
You can import your pics taken with the iphone as you would with any digital camera.
You can e-mail the other pics to yourself, they will never be of the original quality.
You can out a unique contact and calendar entry on the computer. You should get the option to merge the data when you sync. -
I was lately downlaoding a 700mb file, but i lost the internet connection and only 635mb was downloaded and i have the .part file but the download menu says that download failed so i cant click resume, is their any way that i can continue dowlaoding the file without the need redownloading from the beginning?
I do not know if your file can be recovered. But I may be able help you to recreate it with ease. If you will settle for a composite where all image are re-sized for a particular tile size and virtually cropped to its aspect ratio. However all source image need be gathered into a folder to use my script process. Paste Image Roll Script and Picture Package Support Link http://www.mouseprints.net/old/dpr/PasteImageRoll.jsx
-
I have an iPod Classic 5th Generation. I have not used it for about one month. When I turned it on, I had lost all my music and playlist files. The only thing left on the iPod was the music and audio books I have purchased from iTunes store. I tried to delete everything on the ipod by sliding the hold button and then pressing the center button and the menu and I saw the apple logo on the screen but the iPod wouldn't reboot. Any suggestions as to how I can delete everything on the iPod and then plug it into my computer to restore my music library? I am using a Windows 7 operating system.
Does both your Windows and Macbook iTunes have the same library of songs?
if it does then, much easier to proceed, else try to load the Macbook with the same library as Windows.
Note that only one of the Macbook USB port is good for iPod Classic, the other is too slow and may cause timeout, and I would suggest disconnect all other USB devices, while you Restore or Sync the iPod Classic.
Connect the iPod to the Mac, (if iTunes launch, please close it back.)
Use Disk Utility -> select the iPod Device->First Aid->Repair (use option FAT32)
After the Repair complete, eject the iPod.
Connect back to the Mac
When iTunes launch, Restore the iPod when Prompted, (use FAT32)
Sync your library.
Good Luck! -
when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks.
when i use i pad with apple tv for see my photo,youtube and movies all ok.I suspect that the problem is in your router. Do NOT consider your router to be blameless if some other devices seem to work with it.
Try restarting your WiFi router by removing power for 30 seconds. Don't just turn it Off. On many routers that doesn't really do anything but put the router into standby mode. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
There is a chance that some services turned on in your router could be causing problems. Look for a setting called QoS (Quality of Service). If ON turn it OFF.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/ -
I have upgraded my iTunes for Windows and I have lost all my apps and music
I have upgraded my iTunes for Windows and I have lost all my apps and music.
Although i signed in with my iTunes account, i can see only 5 apps (that i downloaded in the last 2-3 days), although on my iPad and iPhone i have more than 100 apps.
If i connect my devices to iTunes, the syncronisation will be made the other way, from iTunes to iPhone/iPad, so i will lose everything.
1. How can i restore these apps from the iCloud back-ups from my devices to my iTunes? Or any other method possible?
2. If you can also give me a suggestion about how to find my music playlists, that would save me from a lot of useless work on creating them again.
Thank you!Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
In the unlikely event that all the media has been inexplicably and permanently removed from your computer, see Recover your iTunes library from your iPod or iOS device.
When you get it all working make a backup!
tt2 -
Completely lost all internet connection on brand new MacBook Pro
2 week old 2011 17-in MacBook Pro, running Lion (factory installed). I should note that this is my first Mac, so I'm still learning my way around, however it's highly unlikely I did anything to cause this to happen.
The problem is pretty simple - I have lost all internet connectivity no matter what method it's connected. I have tried it on my company network via ethernet, and several different WiFi networks. All connections are recognized as connected, but I cannot make any outside connection.
We've rebooted networks servers, rebooted/shut down the Mac, re-checked all of the network settings - everything is what it should be.
Everything literally was working perfect one second and completely lost the next.
Any help would be greatly appreciated!
Thanks in advance.Call Apple tech support line, You have 90 days of free telephone support: http://www.apple.com/contact/
-
What's the best way to transfer all the content, including notes and apps, from my old 3rd gen to my new 4th gen. When I replaced my last iTouch with the 3rd gen I lost all my contacts and notes.
Backup the 3g by syncing in iTunes. Then connect the new one and sync everything to it from your backup.
IPod Touch user guide -
I updated my ipod touch 4g to ios 6 and I lost all my photos and apps
I'm very worried because I updated my ipod touch 4g and I lost all my apps and photos, what can I do to recover my apps and photos?.
A response I put together from another post. Also going into iTunes and choosing to sync phone to iCloud then back "this computer" sometimes works.
First thing.. Stop where you are. Don't try to sync, update, hard reset, iCloud... Just stop.
Check on your phone under 'SETTINGS' 'GENERAL' USAGE'. It should show some value for PHOTOSTREAM. Also, connect to iTunes and you will notice at the bottom of your phones summary page that there is a large amount of 'OTHER' data.
I used third party software called iExplorer (formerly iPhone explorer). In this program you select 'MEDIA FOLDER', then 'DCIM'. In the various apple folders (IE: 101APPLE) you should be able to preview your photos and copy them to your desktop.
From there sync them back to your device through iTunes or whatever method you use.
There is a simpler solution I'm sure, which may involve using iExplorer to delete some .plist files then restart the phone and let it rebuild. I'm going to try it myself AFTER I've finished copying all the photos to my MAC
Hope this helps.
Maybe you are looking for
-
I've tried everything to set up my iMessage and FaceTime but nothing is working
Error Message includes: "An Error Occured During Activation. Try again." "Could not sign in. Please check your network connection and try again.", I have tried the following: I resetted my phone. Still doesn't work. My iCloud works. So there's n
-
How do I re-size pictures taken with iP4 for email, they are WAY too big
They look great in iPhoto, nice and clear, especially the macro shots. However when I email a picture to a client the pictures literally fill up my entire 15" MBP screen and are so large they are fuzzy. Thanks a ton
-
I am generating a PDF file on the web server using SQL Reporting services. Is there a way of adding a JS code to this file? Thanks
-
Error in Oracle 9iAS R2 froms server
hi, am using oracle forms server 9i that comes with the 9ias r2 and i have installed the headstart on it and we are using the headstart for our application. after running any form on the web using the headstart forms server configuration files i have
-
"Serienperiode passt nicht zur aktuellen Periode"
Hallo zusammen, diese Fehlermeldung erscheint beim Versuch, den Kontoauszug abzuschließen. Belegnummerierung und Buchungsperioden haben wir gecheckt - dort haben wir einen Grund vermutet, konnten aber nichts finden. Hat jemand noch eine Idee? Danke u