Lost all sound on my HP Pavilion dv6 notebook

I have a HP Pavillion dv6 notebook with a Widows 7 operating system and have lost all sound. Any suggestions as this is a 6 month old notebook?

I had the same issue last night after an automatic BIOS update.  I read about 7 pages of posts that seem to deal with the same issue and found a combination of actions that seem to have restored my audio functions completely.  I posted the solution and it resolved the issue for at least one other user who commented back.  It it works for you, please also post that it worked for you.  I suspect there are alot of users out there that have or will be experiencing the same issue.  It would be nice if HP would post the appropriate solution, it seems to have been going on for awhile.
1. Through 'Device Manager / Sound, video and game controller' I uninstalled my audio driver (IDT High Definition CODEC) and also deleted the driver software for the device.
2. Through 'Programs and Features' I uninstalled the IDT Audio Software (vers 1.0.6418.0) that was installed with the BIOS update.
--> This forced a reboot.
--> When my system rebooted it automatically searched and found the appropriate audio driver -- now I've got audio and Media Center works fine...
Hope this helps you.
System Information:
HP Pavillion dv7 Notebook PC - Intel(R) Core(TM) i7-2670QM CPU @2.20GHz - 8.00 GB RAM
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Organization: Hewlett-Packard
Product ID: 00359-OEM-8992687-00010
Original Install Date: 11/18/2011, 10:00:14 PM
System Manufacturer: Hewlett-Packard
System Model: HP Pavilion dv7 Notebook PC
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 42 Stepping 7 GenuineIntel ~2201 Mhz
BIOS Version: Hewlett-Packard F.1A, 6/22/2012
Total Physical Memory: 8,140 MB
Available Physical Memory: 5,420 MB
Virtual Memory: Max Size: 16,278 MB
Virtual Memory: Available: 13,297 MB
Page File Location(s): C:\pagefile.sys
Hotfix(s): 143 Hotfix(s) Installed.

Similar Messages

  • I have a HP Pavilion dv7-1444 running Vista 64 bit. I have lost all sound.

    I have a HP Pavilion dv7-1444 running Windows Vista 64 bit. I have lost all sound. There's a red x next to the speakeer icon on the bottom right of the screen. I have reloaded drivers, checked Device Manager, tested sounds, HP Support Assistant says I have the latest BIOS installed. I tried a one prong earphone in the two prong headset and got no sound. The mute button and the volume slider don't work either. 
    Please help me if you can.

    @rerateusa
    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HP Pavilion DV6 Notebook -VX070AV, Windows 7 64-bit- no sound

    HP Pavilion DV6 Notebook -VX070AV, Windows 7 64-bit.
    IDT High Definition Audio CODEC Enabled stwrt64.sys 6.10.6289.0
    Intel (R) Display Audio Enabled IntcDAud.sys 6.12.0.3047
    Speakers show sound coming from internal speakers.
    Speakers and Headphones Properties show- No Tone Control installed–how do I get it?
    I have updated, deleted, and reinstalled drivers, from HP support help, no luck.
    Please Help!
    Thanks
    CJ

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us​...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have lost all sound.?

    Lost all sound even after checking the settings. Pleas help, thanks

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT4623 I have lost all sounds to my applications

    I HAVE LOST ALL SOUNDS TP MY APPLICATIONS

    Have you Checked the  Mute / Silent  Switch on the Side of the Device...?

  • I updated the ios7.02, and lost all sounds.  What do I do?  This is on my iPad.

    When I updated to ios 7.02 on my i Pad, I lost all sounds.  What can I do to get them back?

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Make sure sound is not muted in Control Center; tap on the little bell. Swipe upwards from bottom of screen to launch Control Center

  • Sound Playback Issue with IDT High Definition Audio Codec HP Pavilion dv6 Notebook PC

    Since i bought this laptop, every time i use skype or the Windows Sound Recorder, i hear static that drastically increases in volume. Uninstalling the IDT High Definition Audio Codec prompts my computer to automatically install the driver again, this usually fixes the problem, but after restarting my laptop, the problem returns.
    Does anyone know a permanent fix to this issue?
    Product name: HP Pavilion dv6 Notebook PC
    Product number: B3K22PA#ABG

    Hi,
    Please try:
    (a) Uninstall IDT sound from Device Manager,
    (b) Reboot the machine
    (c) Download the following package and install again:
         http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe
    (d) Reboot the machine.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • TS1702 I lost all sound in my game apps why?

    I lost all sound on all my game apps why?

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    IDT Audio Installer - Windows 7.
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT3986 Lost All Sound in windows 7 on my macbook air

    Well, recently i just installed windows 7 on my mac using bootcamp, but i lost all sound on windows (works on OSX), and the "f"  keys dont work.. (f1-f12)
    What could i do for this :O ?

    As this is almost a daily question, take a look at other threads.
    See what audio chip you have in Device Manager, then find - download - manually install that after you have installed the Apple drivers.

  • HP pavilion dv6 notebook PC - no sound

    Hi
    I have a HP pavilion dv6 notebook PC and my problem is that my sound doesn't work.

    Hi JamSharif,
    I understand you are having issues with the sound on your HP Pavilion g6 Notebook. Here is a link to troubleshoot sound issues.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP Pavilion dv6 Notebook PC sound problem

    hello
    I'm having a problem with my laptop that I'd bought two years ago. My laptop audio wouldn't work without USB headphone. 
    The model is HP Pavilion dv6 Notebook PC
    The product number is XG756UA#ABA
    Thank you

    Hello AustinJeon,
    I see that you are having problems with the sound on your HP computer. I have a couple of suggestions that may help with this issue.
    Here is a link to some troubleshooting steps for common sound issue. Follow the steps in the link and let me know what happens.
    How long have you been having this problem?
    If you use the headphone port does it work or is it just USB?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • After an hp update today i have lost all sound. everything appears to be turned on and up? any ideas

    After an hp update today i have lost all sound. everything appears to be turned on and up? Any ideas?

    Never mind!!! After reading someone elses similar problem I applied their repliers advice and it works! Thanks.

  • Since installing the larest update, I lost all sounds/speaker. How do I resolve it?

    Since installing the most recent  update I have lost all sound from the speakers.  Cannot adjust volume it stays muted. HOw do I resolve it?

    Hello there, ospreytom.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with audio on your Mac:
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT4972 I recently upgraded to ios5 on my iPad,  I have lost all sound but YouTube and that still work

    After upgrading to ios5. I have lost all sounds,  y?

    Have you got notifications muted ? Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Lost all sound on Windows 8

    i have lost all sound on W8. hvae checked plugins and they are all up to date. have never had good sound on this computer (Pacbell Easynote TE) anyway and am considering getting speakers. However i recently downloaded Windows Movie Maker as was having problems with videos taken on my phone that were taking long time to attach on e-mail (i have gmail), if they semed to big for normal 'attachment' . Have also started using their (gmail) Google drive to see if that would help speed things up, but didn't, so tried to load Cloud etc. I think that somewhere in all this the sound went, but it's a minefield (for me anyway) to try and work out. I have done the obvious and checked the Volume levels and they're all supposedly on and set at highest. Any help greatly appreciated. thanks

    Wellthis is strange, i have now checked the videos i mentioned above and now have sound, be it all very low, but that has always been the case with this pacbell since i got it. Also checked some others on Facebook and they have sound too - why would that change overnight??

Maybe you are looking for

  • Problem reg variables in BEX

    Hi Gurus, I am doing sales trend reporting in bex....I have 4 key figures which all gives sales Amt created using some variables. my Selection creteria is  calmonth/Yr Key fig 1 - should show the sales of selected month Key fig2 - should show the sal

  • Example of Dynamic Structure for uix Pages

    Hi for all, I am trying to use the example of the UIX Developer's Guide topical 12 (Dynamic Structure for uix Pages) an example of class 'SampleClass'. In the line: 'Person[ ] people = _ getPeople(...);' Somebody could explain me what it returns _get

  • Showing string length in foreach

    I would like to show the length of each string inside the foreach loop. However, I get error with the following code. How can I do that? Thanks. <%@ taglib uri="http://java.sun.com/jsp/jstl/core_rt" prefix="c" %> <c:set var="strs" value="Peter, Paul,

  • Assigning WBS Codes

    I'm converting several activity codes to a WBS level. The dictionary is complete but now I want to assign those WBS codes to the activities. Several versions ago, you could edit the number, now the program pulls up the entire WBS dictionary and you h

  • Garbage collector as daemon thread

    hai y is garbage collector made as daemon thread what r the primary reasons?