Lost all sound on upgrade to 7.0.3 from 6.5.2

Hi,
I am a total computer idiot and I need help. I've upgraded from QT 6.5.2 to 7.0.3; after I did that I lost (almost) all sound when playing QT movies. Files saved to my hard-drive that used to play with sound no longer do so. And QT files found online (through apple trailers, for example) no longer play with sound.
I say "almost" as there are a few files on my hard drive which still have sound. There's nothing special about these files which I can see though. One of them is an .mov, but all the rest of my .mov files don't have sound. The other is a .mpg, but all the rest of my .mpg files don't have sound.
After some reading about in this forum I found some genral comments about ones midi settings. Checked those against what are supposed to be the correct values, and they seem fine.
So anyone have any idea about what might be up? Seriously, suggest anything, even the most obvious stuff.
thanks
PowerBook G4 1.25GHz   Mac OS X (10.3.9)  

I have the same problem but with the QT 7.0.4...
Try to reinstall QT 6.5.2 (in 2 steps)
1) reinstall 7.0.1
http://www.apple.com/support/downloads/quicktime701reinstallerforquicktime703.ht ml
In my case 7.0.1 doesn't work too... may be an additional coded ?? but i have no time to analyse.
2) reinstall 6.5.2
http://www.apple.com/support/downloads/quicktime652reinstallerforquicktime701.ht ml
Good luck
iMac G51.8 GHz 1GO DDR SDRAM   Mac OS X (10.3.9)  

Similar Messages

  • HT4972 I recently upgraded to ios5 on my iPad,  I have lost all sound but YouTube and that still work

    After upgrading to ios5. I have lost all sounds,  y?

    Have you got notifications muted ? Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • After upgrading to iOS7 I lost all sound for my 4S except for the ring when someone calls. I can't listen to music, I don't get text or email notifications. I have tried rebooting?

    Following upgrading to iOS7 I lost all sound for my 4s except for the ring when someone calls. I can't listen to music, I don't get text or email notifications. I have tried a wipe and reinstall, I've tried hard rebooting, I tried erasing all of my music and reinstalling it, I checked my Do Not Disturb, and I tried the AssistiveTouch mute button. Nothing. I can't even play music through bluetooth or headphones. Can anyone help please as its driving me mad!

    I experience this problem too. I am using iPhone4 and just upgrade it to iOS7. And now I can not make outgoing call. I checked all the setting, and nothing wrong. I even replaced my sim card with the new one, still can not help.
    I read this link
    https://discussions.apple.com/thread/5322252
    and I try dial *#31#, it help, but not permanent solution.

  • I have lost all sound.?

    Lost all sound even after checking the settings. Pleas help, thanks

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT4623 I have lost all sounds to my applications

    I HAVE LOST ALL SOUNDS TP MY APPLICATIONS

    Have you Checked the  Mute / Silent  Switch on the Side of the Device...?

  • I updated the ios7.02, and lost all sounds.  What do I do?  This is on my iPad.

    When I updated to ios 7.02 on my i Pad, I lost all sounds.  What can I do to get them back?

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Make sure sound is not muted in Control Center; tap on the little bell. Swipe upwards from bottom of screen to launch Control Center

  • I have a HP Pavilion dv7-1444 running Vista 64 bit. I have lost all sound.

    I have a HP Pavilion dv7-1444 running Windows Vista 64 bit. I have lost all sound. There's a red x next to the speakeer icon on the bottom right of the screen. I have reloaded drivers, checked Device Manager, tested sounds, HP Support Assistant says I have the latest BIOS installed. I tried a one prong earphone in the two prong headset and got no sound. The mute button and the volume slider don't work either. 
    Please help me if you can.

    @rerateusa
    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop and install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Lost all sound on my HP Pavilion dv6 notebook

    I have a HP Pavillion dv6 notebook with a Widows 7 operating system and have lost all sound. Any suggestions as this is a 6 month old notebook?

    I had the same issue last night after an automatic BIOS update.  I read about 7 pages of posts that seem to deal with the same issue and found a combination of actions that seem to have restored my audio functions completely.  I posted the solution and it resolved the issue for at least one other user who commented back.  It it works for you, please also post that it worked for you.  I suspect there are alot of users out there that have or will be experiencing the same issue.  It would be nice if HP would post the appropriate solution, it seems to have been going on for awhile.
    1. Through 'Device Manager / Sound, video and game controller' I uninstalled my audio driver (IDT High Definition CODEC) and also deleted the driver software for the device.
    2. Through 'Programs and Features' I uninstalled the IDT Audio Software (vers 1.0.6418.0) that was installed with the BIOS update.
    --> This forced a reboot.
    --> When my system rebooted it automatically searched and found the appropriate audio driver -- now I've got audio and Media Center works fine...
    Hope this helps you.
    System Information:
    HP Pavillion dv7 Notebook PC - Intel(R) Core(TM) i7-2670QM CPU @2.20GHz - 8.00 GB RAM
    OS Name: Microsoft Windows 7 Home Premium
    OS Version: 6.1.7601 Service Pack 1 Build 7601
    OS Manufacturer: Microsoft Corporation
    OS Configuration: Standalone Workstation
    OS Build Type: Multiprocessor Free
    Registered Organization: Hewlett-Packard
    Product ID: 00359-OEM-8992687-00010
    Original Install Date: 11/18/2011, 10:00:14 PM
    System Manufacturer: Hewlett-Packard
    System Model: HP Pavilion dv7 Notebook PC
    System Type: x64-based PC
    Processor(s): 1 Processor(s) Installed.
    [01]: Intel64 Family 6 Model 42 Stepping 7 GenuineIntel ~2201 Mhz
    BIOS Version: Hewlett-Packard F.1A, 6/22/2012
    Total Physical Memory: 8,140 MB
    Available Physical Memory: 5,420 MB
    Virtual Memory: Max Size: 16,278 MB
    Virtual Memory: Available: 13,297 MB
    Page File Location(s): C:\pagefile.sys
    Hotfix(s): 143 Hotfix(s) Installed.

  • TS1702 I lost all sound in my game apps why?

    I lost all sound on all my game apps why?

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    IDT Audio Installer - Windows 7.
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT3986 Lost All Sound in windows 7 on my macbook air

    Well, recently i just installed windows 7 on my mac using bootcamp, but i lost all sound on windows (works on OSX), and the "f"  keys dont work.. (f1-f12)
    What could i do for this :O ?

    As this is almost a daily question, take a look at other threads.
    See what audio chip you have in Device Manager, then find - download - manually install that after you have installed the Apple drivers.

  • After an hp update today i have lost all sound. everything appears to be turned on and up? any ideas

    After an hp update today i have lost all sound. everything appears to be turned on and up? Any ideas?

    Never mind!!! After reading someone elses similar problem I applied their repliers advice and it works! Thanks.

  • Since installing the larest update, I lost all sounds/speaker. How do I resolve it?

    Since installing the most recent  update I have lost all sound from the speakers.  Cannot adjust volume it stays muted. HOw do I resolve it?

    Hello there, ospreytom.
    The following Knowledge Base article offers up some great steps for troubleshooting issues with audio on your Mac:
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Lost all sound on Windows 8

    i have lost all sound on W8. hvae checked plugins and they are all up to date. have never had good sound on this computer (Pacbell Easynote TE) anyway and am considering getting speakers. However i recently downloaded Windows Movie Maker as was having problems with videos taken on my phone that were taking long time to attach on e-mail (i have gmail), if they semed to big for normal 'attachment' . Have also started using their (gmail) Google drive to see if that would help speed things up, but didn't, so tried to load Cloud etc. I think that somewhere in all this the sound went, but it's a minefield (for me anyway) to try and work out. I have done the obvious and checked the Volume levels and they're all supposedly on and set at highest. Any help greatly appreciated. thanks

    Wellthis is strange, i have now checked the videos i mentioned above and now have sound, be it all very low, but that has always been the case with this pacbell since i got it. Also checked some others on Facebook and they have sound too - why would that change overnight??

  • I lost all sound notifications. No ring no key depression sound no notifications at all. Sound is up fine

    I suddenly lost all sound notifications

    Check if the mute switch located on top of volume key is set to ON.

  • My hp mini 210 has lost all sound

    I have a hp mini 210-1910NR after I ran a system restore program I lost all sound. I re-ran the restore program but still no sound.
    Is there something else I can try to recovery the sound?

    Hi
    You have a couple of options as I see it please try these steps might help you to fix the issue.
    Click start in search type Recovery Manager then click on it select Yes on User access control then select I need immediate help then select Driver & application recovery select the Sound driver and install it then restart the unit.
    Go to device manager and uninstall the driver and restart and unit will install the driver automatically.
    Try to update the driver from hp.com website for Audio & Bios.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

Maybe you are looking for

  • Tax statement item missing for tax code O3

    Hi experts, I'm sorry about my question which can find out a lot in SDN forum, but i still post this here because my case is different, I see some similar Error, but I cant solve my issue. In sales standard process, I do SO, DO, Bill without that err

  • How to Identify program is running in background or Foreground mode?

    Hello Experts, I have developed on Z report and from this report BDC for Transaction CO11 is runnning using CALL TRANSACTION statement. On Selection screen there is a option for selecting the BDC mode either in  Background or Forground or Error mode.

  • PDF reader problem

    i can't open PDF files in my laptop though i have adobe reader 9 installed Plz kindly help me with this.

  • Iteractive Form Add button

    Hi All, I created an interactive form by using sfp i added button to table line items in preview i can add new  line item but when i download the same form using my report i can't add new item, if i click its not showing new line item i checked previ

  • SAP Solman MMC is not opening

    Dear all, i have tried to open SAP Solman MMC, i got the below error . MMC cannot open the file c: \Documnets and  setting\user\Windows\sapmmc.msc. this may be because the file does not exit, is not an MMC console , or created by a later version of M