Lost ANY ability to make websites!!Lost connection to domain,etcFREAKINOUT!

NEED BIG TIME HELP!! SITE DOWN FOR ALMOST 2 WEEKS BUSINESS SITE THIS IS KILLING ME!!!!
Some how, I have lost connectivity between iweb and my domain name (dominatemetal.com)
I have been despreate to get it back!...BUT FORGET THAT...can someone tell me how to get iWeb to publish Any site ever again???.. it will not publish anysite anywhere I am pulling my hair out!!
Went to my domain registar, and redirected the cname to web.me.com put the(.) at the end on atleast 2 different occasions to make SURE that's not the problem, at this stage, just want to make new site. ANY SITE!

Thanks for your help! It turned out to be an issue with Go Daddy.. My web guy was'nt putting the (www.) BEFORE the website home page cname~ just putting in mobileme.com as the cname~ Hey Thanks for your help though. It's guys like you that make computer life for guys like me a whole lot better!

Similar Messages

Is there any way to make an iPad3 connect to the internet in an Extended Verizon area?

Is there any way to make an iPad3 connect to the internet in an Extended Verizon area?

If you have the prepaid 3G account, no. The prepaid service, the kind activated directly from the iPad only works on Verizon's own network. You'd need to change to the month-to-month postpaid service to roam on the extended network. Call customer service about changing it over. You will need to do a credit check but there is no contract.

Is there any way to make a socket connection to a java file on the net?

Is their anyway to make a socket connection to a java applet that I place on a webhost? I want to connect to a javaapplet from my vb.net program and send commands to it. Like http://www.geocities.com/Sylonious/javafile.jpx:7070
?

Is their anyway to make a socket connection to a java
applet that I place on a webhost? I want to connect to
a javaapplet from my vb.net program and send commands
to it. Like
http://www.geocities.com/Sylonious/javafile.jpx:7070
?You wouldn't have a port in the url, you would need to have the socket open in the applet code. The vb.net program would also need to be on the same server as the applet or you'll have security issues and I doubt that's possible with geocities. I don't know what you would need to communicate with a vb.net if anything, but I'm sure it's possible.

Any apps that makes a URL connection crashes

Any app that connects to the internet using a url address on my MacPro crashes (Software Update, Safari, iTunes, App Store, etc). I can connect to the other computers on my network normally and have no problem moving files back and forth. I can ping an external IP address, but anything that tries to connect to the internet using a url causes a program crash. My other computers on the network can connect to the internet normally.
In the crash logs there is always a Crashed Thread and lines similar to the following:
0x00007fff854e85d1 +[PKURLConnection sendSynchronousRequest:returningResponse:error:] + 283
31 ...le.SoftwareUpdate.framework 0x00007fff8098aa39 +[SUURLConnection sendSynchronousRequest:returningResponse:error:] + 180
32 ...le.SoftwareUpdate.framework 0x00007fff809826cb +[SUCatalogFetch _fetchDictionaryFromURL:returningError:] + 299
33 ...le.SoftwareUpdate.framework 0x00007fff809823fc +[SUCatalogFetch _fetchAppleCatalogDictionaryReturningError:finalURL:] + 182
34 ...le.SoftwareUpdate.framework 0x00007fff8098232a +[SUCatalogFetch _fetchCatalogDictionaryReturningError:finalURL:isAppleDefault:usingURL:] + 472
35 ...le.SoftwareUpdate.framework 0x00007fff809820f6 -[SUCatalogFetch initWithURL:] + 128
or
27 com.apple.Foundation 0x00007fff866d48bb _NSURLConnectionWillSendRequest + 137
28 com.apple.CFNetwork 0x00007fff86a03845 URLConnectionClient::getRequestForTransmission(_CFURLResponse*, _CFURLRequest const*, __CFError**) + 359
29 com.apple.CFNetwork 0x00007fff86a02b76 URLConnectionClient::clientWillSendRequest(CFURLRequest const*, _CFURLResponse*, URLConnectionClient::ClientConnectionEventQueue*) + 200
30 com.apple.CFNetwork 0x00007fff86a7b952 URLConnectionClient::ClientConnectionEventQueue::processAllEventsAndConsumePayl oad(XConnectionEventInfo<XClientEvent, XClientEventParams>*, long) + 138
It appears that there is some sort or URL connection problem. I've tried repairing permissions, rebuilding the directory, checking the hardware, and rebooting, but none of these have had any effect.
Any suggestions of what to try next would be appreciated.

iTunes & Safari up to date? Have you tried using another browser?
*Disconnect all peripherals from your computer.* Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

I have tried to update my iPod Touch 4G to the latest update. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?

I have tried to update my iPod Touch 4G to the latest update, I currently have iOS 4.1. After the 4 hours an error message appears saying iTunes had lost connection even when I am fully connected to the internet. I have repeated the update 4 times now with not luck. Any ideas?
Thanks in advance
Adam

If you get a network timed out error, try disabling the security software on the computer during the download and install.
You can also try a direct download andinstall by:
iPod, iPhone and iPad Firmware Download
Nera the top of the page aretheinstructions for selecing the download for the install.

TS4036 Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a net gear 300 router. Any suggestions?

Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a netgear 300 router. Any suggestions?

Thanks, helped me figure out a bigger problem there was with my router's access control and all kinds of crazy numbers that needed to be changed, but I got it.
Problem is fixed as far as I can tell!

TS1363 lost connect and ability to sync to ITunes

I have lost connection with my Iphone 5S. New download was interrupted. Now phone scren shows ITunes logo and cord to connect on black screen.

Hey luci711,
Thanks for the question. It sounds like your iPhone is currently in recovery-mode. To resolve this, you will need to restore the iPhone with iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

How to fix lost connections to original high-resolution pictures in iPhoto and how to import an iPhoto Book from one iPhoto library to another

Hi there,
I am using a MBP Pro with 8 GB cache and 1 TB HDD from beginning of 2011 with OS X Yosemite and iPhoto version 9.6 (910.29).
I created an iPhoto Book to print which contains my best pictures of 2013 and 2014. Then I got an error message when I wanted to print the book, saying (translated from German):
Book could not be created.
With photo p233432343.jpg there was an error. The original version of that photo with full resolution could not be found or is damaged. Please replace the photo or delete it from your book.
When I enquired further, I found out, that many, many pictures in my iPhoto library have that problem - only the thumbnail picture is found by iPhoto, but not the one with the high resolution. When looking at the photos in detail one sees that they are not sharp because obviously the photo book only refers to the thumbnail. When I went into the iPhoto Library using Finder, I saw that the original high res photos are still there. As there are an estimated 3000 photos with a lost connection (some still have, it but about 1/2 of my photos don´t), it does not make sense to import those photos manually. This photo book is just the tip of the iceberg, so to say.
Then I looked for solutions in some forums. I had two lPhoto libraries, one on my HDD (120GB) and one on an external HDD (175GB). Assuming there might be problems, I have deleted (moved) the one on my HDD, because the "right one" is the one on my external HDD and started iPHoto again using the alt key. But that did not work either.
I then tried to repair my iPhoto library using iPhoto Library Manager, and merged and rebuilt libraries. The library that came out was crap - all folders that had lost connections to the high resolution pictures now have zero photos in it. Also it is lacking the projects, including the photo book I created.
Then I went to find out if there is a way to import the iphoto book project from the old, corrupt library into the new, repaired library but could not find anything. It can only be exported as a file structure or website. As the file structure is missing the high res pictures, that does not even solve the "little" problem of the photobook.
I would REALLY appreciate your help on the two questions:
1- Can you advise what I need to to do to to get the connection to the high resolution photos established again ? As it is more than 3000 photos, I use an automated way of reestablishing that connection. Probably an answer to this question would make question 2 irrelevant.
2- Do you know if there is a way to export and import a book project created in iPhoto from one library to another ?

1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library.

E5: Ovi Suite has lost connection with your device...

I am trying to update the software on my E5 using OVI suite but I keep getting an error during the install phase (after backup). The following error and instructions are displayed in the OVI suite window but makes no difference when I follow these instructions (just end up back with the same error).
"Nokia Ovi Suite has lost connection with your device. Follow these steps to help reconnect your device:
1. Remove USB cable from your device.
2. Restart the device (turn off and on again).
3. Re-insert the USB cable.
4. Click 'Ok' below to continue updating."
Current E5 software version is 042.007.
I am trying to update to E5 software v. 043.115
Any ideas?

Yep having the same issue. Just got a replacement handset due to the random restarting issue, soon after setting up the new handset I get a message on phone saying software update is available. Both OVI suite and Nokia software updater say version 43.115 is available (about 200mb in size), I currently have the same version as you 42.007. It claims to do a lot of improvements to the handset. The update downloads fine but when it comes to installing I keep getting the same issue. Phone simply will not restart automatically and the update restarts then fails at the same point over and over. Had the same problem with my previous handset.
I spoke with my network provider to see if it was an issue with the handset needing firmware specific to them but they said no it is an issue with the firmware itself and has been happening to everyone since its release!!! They said I should not download it until Nokia has resolved the issues with it. But how do I know when that will happen as I cannot find anything put out by Nokia stating there is an issue or anywhere on web forums saying there is actually a problem.

'Disk Utility has lost connection with Disk Management Tool' w/ RAID 10 set

Using 4 internal drives, I have specified the following setup for each:
2 partitions, 1 'speed' of 5 GB and 1 'data' of whatever remains.
The 4 speed partitions stripe to a single RAID volume correctly.
The 4 data partitions are used to make a RAID 10 volume as follows:
The first 2 data partitions are mirrored to make a 'data-A'
The next 2 data partitions are mirrored to make a 'data-B'
These complete correctly.
Upon attempting to strip data-A and data-B in order to finish the RAID 10 setup, Disk Utility quits with the following message:
"Disk Utility has lost connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility'.
A search here and on the nets reveals only that this message appeared in 10.3.x when attempting to repair disk permissions and had to do with a rogue iTunes support file. This is occurring on a blank system (no iTunes installed) so I don't think its the same cause.
Note that I was able to complete this setup under Tiger several times without issue, so it seems to be unique to Leopard. Does anyone know what is going on and hopefully suggest a workaround?

To answer my own issue and leave a marker here for others, I was able to successfully set up a RAID 10 partition using diskutil, indicating that the problem is Disk Utility itself and not the RAID implementation.
Disk Utility has proven itself to be bugridden (must restart frequently to get updated view of volumes; drops device names at various times; etc.) and this latest bug would seem to suggest that it should be avoided in favor of diskutil for any serious RAID construction.

Hi i cant download any games.. i have internet connection. before i was able to do it but this past few days i cant it says cannot connect to itunes store i didnt update my ipad to ios 7 because it will make my ipad very slow like whT happen to my iphone,

hi i have ipad mini i cant download any games.. i have internet connection. before i was able to do it but this past few days i cant it says cannot connect to itunes store i didnt update my ipad to ios 7 because it will make my ipad very slow like whT happen to my iphone, is that the reason y i cant
download games anymore?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

Lost Connection to iTunes Music Store...

I was downloading a season pass for a TV show (22 EPISODES) and my iTunes lost the connection...My error message said that the connection had been reset and I should make sure that my connection was active and then retry...How do I make sure the connection is active?...What happens to the episodes that haven't yet been downloaded to my iPod?...How will I be able to get them?...I will NOT be paying for them twice...Any help in resolving this issue would be greatly appreciated...

Hi, and welcome to the Discussions!
I'm an iTunes for Mac user, but the process should be the same... launch iTunes and find and select "Check for purchased music" from the Advanced tab of the iTunes menubar.
This will identify what was purchased which not yet downloaded (or incompletely downloaded). When it does, it will automatically resume download from ITMS.
Here's a link with more info on this.
Gary

E4200 - Lost connection

I did my research, read all the reviews and finally setteled on this router. Setup was a piece of cake. Had it up and running within 5 min. All was good. 2 hrs later lost connection. Tried included software to re-establish connection. No go. Re-connected old dinosaur $59.00 linksys router and everything was good again. Not sure what happened. But it didn't work. I am no expert, all I know is that it stopped working. Going back for a refund tomorrow. What's great about it: Easy initial install What's not so great: It failed within two hrs

As per the scenario that you explained for that first of all upgrade the Router with the latest firmware which can be downloaded from the cisco website (homesupport.cisco.com)...
If you want to configure the router with the help of the CD so for that you need to unistall the existing Cisco Connect Software from the computer...
Reset the Router and power cycle the network...
Make the following connectivity Modem ----> Router -----> Computer... Then install the Cisco Connect Software... It will help you in configuring the Router...
But if you to configure the Router manually then it will be according to ISP ( Internet Service Provider ) setup... So in that case tell us who is you ISP...

HT5706 every since i have had my apple tv it always stops in the middle of everything and says i have lost connection.

i am very disappointed. i should have sent it back, but i thought it was something that i was not doing right. I will be watching a movie and then all of a sudden it says i have lost connection. i was going to buy another one, but i am scared to buy another one.

Hello there, ermafrompaola.
The following Knowledge Base article offers up some great, practical steps for troubleshooting connectivity with your Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Although the entire article is very useful, the following section may be helpful in your circumstance:
Apple TV unexpectedly disconnects from the Wi-Fi network or signal strength is weak or fluctuates
Check for any obstructions and adjust the location of your router or Apple TV; also check for sources ofpotential interference.
Update your Wi-Fi router to the latest firmware.For an AirPort Base Station, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
If after attempting the above steps, your Apple TV is still unable to connect to your Wi-Fi network:
Restart your Apple TV: Choose Settings > General > Restart.
If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by choosing Settings > General > Software Update. If your Apple TV can be updated, install the update and test again.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SGE2010: stack member reboots with 'Lost connection with unit x reason 0x20097'

Hi All,
Over the last 2 months we've had repeated issues with SGE2010 units in a stacking configuration rebooting randomly.
Prior to a member reboot occuring we see the following logging message via SNMP Trap on on the unit's internal logging via the GUI:
'Lost connection with unit x reason 0x20097'
We've made attempts at consulting Linksys/Cisco support regarding this 'feature' but aren't really getting anywhere with 1st level support who don't seem to understand much about supporting the device.
The layout is thus:
* 3 x SGE2010 units all of the same firmware version (3.0.1.0)
* Stack configured in a ring topology
* Cat6 cabling used on the stacking ports
* 7 VLAN's
* Mixture of trunking + VLAN tagging & standard ports configured
We've tried the following:
* Swapping out the member that reboots with another, but we get the same behaviour even with a new unit after about three weeks of running
* Changing the cabling between the members, same behaviour
* Upgrading the firmware from a previous version to the current 3.0.1.0
I'm not really keen on factory resetting the whole show & reconfiguring 144 ports by hand (the downtime will cost my users dearly, not to mention carpal tunnel from overuse of the web GUI)
Is anyone able to clarify what a reason code of 0x20097 is?
At least understanding what the error is may allow us to better understand the condition in which the switch decides it must reboot.

Hi Lee,
The small Business support center (SBSC) is the place to get this problem resolved. If the technician needs to get the error code looked at by a Product Engineer, then they have to escalate your call into the bowels of Cisco development.
Please call into the SBSC again, and try to reopen or open a new case. This call has to be resolved or escalated.
You have the ability to say to the technician ,
1. "I want this call escalated" or
2. " I want to speak to the Manager On Duty to esclatate the call"
If you have any issues, please let me know.
My email address is dhornste at cisco.com (remove the spaces and replace at with @)
here is a link to get hopefully a local number to call into the SBSC.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
regards Dave

Lost ANY ability to make websites!!Lost connection to domain,etcFREAKINOUT!

Similar Messages

Maybe you are looking for