Lost applications after update Firmware

After upgrade to Firmware 5.x most of the Applications on my SDCard are not added tot any Menu and cannot be found.
Probably is has something to do with the message that 'Not trusted software found on memorycard....' and therefore is stops scanning de SDCard for applications. In de Applications Manager all found Programs are 'installed' and I could not find anyhing strange.
Is there an way to 'force' scanning or to add Applications Manualy?
Thanks for thinking.

Using Application mgr. on device are there any alphanumeric names - not installed?
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Compass application can't running well after update firmware to 20120726

    my windpad7 can't run compass application well after update firmware to Android_2.3.1_MSI_02_20120726 but it can pointing well if i turn it upside down (face down). i use the same application that running well on earlier firmware and I've try using another typical application and the result is the same,.. anyone experienced it? 

    on my n73 i can go to app manager and reinstall them.
    if u wanna remove it, then reinstall them and uninstall.
    Blackberry Bold

  • I can't open any application after updating to 4.3.5

    i can't open any application after updating to 4.3.5???!!
    can someone help..?
    before this i coudn't listen to music with my intern speaker.

    - Try a reset. Nothing will be lost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Try downloading/installing a new app.
    - iOS: Troubleshooting applications purchased from the App Store

  • Kernel panics after updating firmware

    Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
    Sun Jul 5 18:24:05 2009
    panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
    EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
    CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
    EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
    0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
    0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
    0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
    0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
    0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
    0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
    0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
    0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
    0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
    0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
    0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
    0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
    0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
    0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
    0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F42388C8)
    Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
    Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
    I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
    Can anyone decipher my KP log and see if there is a fixable problem?
    thanks in advance,
    Pat Leopard

    Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
    Wed Jul 8 10:44:41 2009
    panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
    EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
    CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
    EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
    0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
    0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
    0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
    0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
    0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
    0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
    0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
    0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
    0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
    0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
    0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
    0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
    0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
    0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
    0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
    Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
    dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
    com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
    dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    9A581
    Kernel version:
    Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F42388C8)
    I left the computer alone for a while and when I hit the power button it came right up.
    I'm going to pull RAM modules per your suggestion.
    thanks,
    Pat Leopard

  • Lost sound after update to 10.7.3 my recent mbp i7 ivybridge 13.3 mid 2012

    please help me quickly ...i lost sound after update to 10.7.5my recent mbp i7 ivybridge 13.3 mid 2012
    i also tried re installing 10.7.3  and finally 10.8 also lost sound
    but when i boot to windows 7 the sound works fine in windows and dissappear again in mac os
    what can i do ???????
    macbook pro core i7 ivybridge 13.3 mid 2012

    The service centre told me it will need changing the logic board

  • I can't back up my phone, they ask me to delete the back up, but I don't want to because I lost everything after updating the iTunes, How can I get back the back up?

    Everytime I try backing up my phone, it says there's something wrong and wants me to delete the back up...But I don't want to delte the back up because I just lost everything after updating the iTunes, Is there any way I could get back everything from the back up?

    Thank you for answering my question. If I reinstall itune, is it mean that I need to install music, apps, video...everything in itune again? also intall everything in my iphone again?

  • How I can closed all open application after update to iOS 7.0.2.0?? Before this v iOS7 we was can closed any application's open :(

    How I can closed all open application after update to iOS 7.0.2.0?? Before this v iOS7 we was can closed any application's open :(

    There's no good way to do it.  But you don't need to.  iOS 7 automatically handles whether an application takes up memory or has files open.  There's no real advantage to you ever closing an application yourself.
    If you are having problems with a particular app, please describe them.

  • Sony A7 failed to turn on after updating firmware 2.00

    As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

    I bought the Sony A7II a few days ago.  It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer.  Neither one would get the charge light to illuminate.  Not feeling the love Sony.  I just purchased a Flash, wrist belt, filters, etc...  I'm definitely not happy.  It seems this is a problem!

  • Some buttons without tones after updating firmware...

    Hi.
    After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
    All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
    Should I try to restore the phone by *#7370# ??? 
    Is anybody facing the same issue ???
    br,

    Hey,
    I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone.  Such a progressive step..

  • Lost audio after update today

    Hp Pavillion dm4 
    Lost audio after update today, 2nd effin time this has happened, **bleep**?

    Hm.. I never have problems with audio in Windows 7..
    Just try this: 
    Please run the Sound troubleshooting tool by going to Control Panel -> Troubleshooting -> Troubleshoot audio playback -> follow the wizard to troubleshoot the issue.
    Regards,
    BBot

  • Apple TV doesn´t work at all after updating firmware!

    After updating firmware Apple TV 3 the only thing that works is the little lamp on the front...it´s steadily blinks. It doesn´t response to remote control, and don´t show up threaded via USB in Itunes for resetting.
    Model: Apple TV 3
    Itunes: 12.0.1.26
    What to do?

    The update didn't apply correctly. You need to restore via iTunes.
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    Make sure you follow the steps correctly (unplug all cables, connect micro usb, then reconnect power)
    Connect directly to a computer, not a keyboard port or USB hub. Try a different cable

  • After Updateing Firmware defult password is What?

    Sir
    i have router RV215W and i was update my router firmware to 1.1.0.5 . After finishing updation my router was restart than after i found wifi name is "ciscosb1" but old password is not work . So please tell me the defulted password after updateing firmware .

    Hi Udayaraj,
    Even if you do a firmware upgrade the password wont get changed until and unless if you do a device factory reset.
    once try cisco/cisco or admin/admin.
    Thanks,
    Phanikrishna

  • APEX.CONDITION.UNHANDLED_ERROR in Application after Update to 4.2

    following error in an Application (working perfect in Apex 4.0.2) after Update to 4.2.0
    after entering url:
    Error     Error processing condition.
    ORA-00907: missing right parenthesis
    Technical Info (only visible for developers)
    is_internal_error: true
    apex_error_code: APEX.CONDITION.UNHANDLED_ERROR
    ora_sqlcode: -907
    ora_sqlerrm: ORA-00907: missing right parenthesis
    error_backtrace:
    ORA-06512: at "SYS.DBMS_SYS_SQL", line 1325
    ORA-06512: at "SYS.WWV_DBMS_SQL", line 1185
    ORA-06512: at "SYS.WWV_DBMS_SQL", line 1256
    ORA-06512: at "SYS.WWV_DBMS_SQL", line 1294
    ORA-06512: at "APEX_040200.WWV_FLOW_DYNAMIC_EXEC", line 880
    ORA-06512: at "APEX_040200.WWV_FLOW_CONDITIONS", line 331
    Any Ideas?
    regards
    Ralf

    the was an missed ' in an authorization schema (SQL Query) - prior Versions of Apex ignored that error ...

  • How do I recover my lost tabs after updating to Firefox v33?

    Problem: After update to v33, I am unable to restore my lost tabs and GROUP tabs from my previous session, which was last night at 6:38 pm EST.
    Here are the steps that I have taken:
    1) History > Restore previous session is greyed out.
    2) I have checked to make sure that I had configured session restore by going to Options > General panel > When Firefox starts: > Show my windows and tabs from last time.
    3) I have right-clicked on Firefox > Properties > Previous Versions. But since I never set up any sort of restore configuration, there were no previous versions available.
    4) I have tried to look for the sessionstore.js file in my profile folder to replace it with my sessionstore.bak file because the date for that file was last modified at 10/14/2014 6:38pm. However, I can not find the session.js file and the only sessionstore-related files that I see are: session.rdf, sessionCheckpoints.json, sessionstore.bak, sessionstore.bak-20140923175406.
    Please help! I had a lot of tabs. I don't want to go to History to find my tabs one by one because I also had GROUPs of tabs that I have not opened in a month or more and each group of tabs have many tabs in them too.

    Hi magasx, I'm trying to understand the part about previous.js. That was not helpful because it wasn't an early enough version of your session? In your screenshot it is a very large file, and so is your recovery.js. Did you check the list of closed windows and tabs that appears on the History menu to see whether what you're missing appears there?
    Your screen shot shows a 9MB file from March 22nd, it's the last one in the list. To try that file, I suggest copying it to a safe place, and then when Firefox is closed, renaming the current sessionstore.js file to sessionstore.old and copying in the upgrade...js file and renaming it to sessionstore.js. Then when you start Firefox, Restore Previous Session. Does that get you close?

  • Big Trouble in all Video-Applications after updating to CC 2014

    After updating my CC to CC (2014), the new Video-Applications (Pl,Pr,Sg,Me) doesn't work.
    The other apps (Ps,Ai...) are ok. Ae starts, but it runs very faulty.
    Pl,Pr,Sg,Me doesn't even start.
    Did you really tested this software, before you published it?!
    I work on OSX 10.9.3 with Blackmagic Video-Hardware. German Version.

    I am Windows, but have some saved links
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

Maybe you are looking for