Lost ATI CCC after bios update

I clicked on "system update"(ThinkVantage3) in the start menu. Then "get new updates", It recommended a bios update so I installed it. Now, it replaced the ATI CCC icon in the task bar with a Intel(R) Graphics Media Accelerator Driver for Mobility" icon. I checked and it now says I have a ATI FireGL V5700 graphics card as opposed to the ATI Mobility Radeon HD 3650 before the update. Also, when I click on the ATI Catalyst Control Center program in the start menu, it says, "ATI CCC cannot be started because the currently active GPU is not supported". How do I fix this? Or, how do I uninstall this update? I can't change the screen resolution or any of the other graphics features.

Hello,
please try to download newest Ati drivers from Lenovo support pages.
Regardings bios update:
Version 1.18-1.01
[Important] An incorrect display adapter name is displayed on ATI FireGL V5700 model (ThinkPad W500). Note: Make sure that you have updated the display driver with the following version before BIOS update. -ThinkPad Switchable Graphics Driver for Windows Vista Version 8.52.4.4-080919a-069896C-Lenovo (7vd535ww) or later or -ATI Display Driver for Windows XP Version 8.503.2.2-080818a-069536C-Lenovo (7yd119ww) or later Or you will be asked for an appropriate driver for a newly found hardware device and the display may be VGA(640x480) mode. In VGA mode, your icon arragement on the desktop will be messed up.
(Fix) The external display may have blank screen when the computer is attached to the Docking Station with the LCD closed and then is powered on.
(Fix) Serial ATA Controller mode option setting is set as wrong value via WMI interface.
Message Edited by Agotthelf on 12-11-2008 09:54 AM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Similar Messages

Lost RAID function after bios update 870S-G54

WOW, Lucky I backed up original bios before flashing. No RAID during post. Flashed back to original and got my RAID5 array back. Beware of latest version 17.D, 2011-06-29.
What is up with that?

In this case then, stick with the BIOS version that works for you. Just because a new version becomes available, doesn't mean that you MUST upgrade, only if you need to.
And in the meantime, you can report your findings to MSI here:
http://support.msi.com

H97M-G43 RAID0 Config Lost After Bios Update

All bios is buged lost RAID0 config after bios update(no know for other RAID modes)
Firmware Versions with problem:
2.3
2.4
2.5
2.6
for 2.0/2.1/2.2 Bios versions no know if have this problem.
the problem is serious because in each update you lose RAID Config. I hope to fix it quickly

Of course you lose volumes if you change to AHCI, reboot and back to RAID at least when you have Windows 8/8.1. So now I am slightly confused where the problem is..
And since we gain experience through time, yes you lose RAID when updating BIOS as it automatically gets back to AHCI (default modes). So if you ever want to update BIOS, best is to disconnect HDDs, update BIOS and reconnect them before entering BIOS.

My itunes is asking for a kind of pasword while I am trying to backup my phone as it lost my contacts after an update of the software yesterday?

My itunes is asking for a kind of pasword while I am trying to backup my phone as it lost my contacts after an update of the software yesterday? As I remember i never set a pasword and even if I have one pas for mos of the things but its not working. Why apple have to set a pasword for me, and why the haven't let the chance to reset the pas if forgoten? If someone have any clue how to fix this please let me know.

if you cant remember the password of your back-up encryption, you can't back it up
You will have to restore as a new phone

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

HT5278 I lost a screen after this update, does anyone know how to fix this?

I lost a screen after this update, does anyone know how to fix this? Update iOS 5.1.1 It used to have three screens with icons on them, now only 1.

No offence, but as with quite a few others, my Iphone stopped charging on mains after iOS 7.0.4 update too.
Not sure you can categorically advise that "it simply is not a software issue" when so many different people are having the same symptoms after updating their iOS Just have a quick Google!
Luckily my (original Apple) cable will still allow recharging via USB to a laptop. So, process of elimination would point to a bricked charger that was working faultlessly up until the iOS 7.0.4 update was applied. Seems quite a stretch to be a coincidence.
Look forward to an explanation ..... and an update? ......

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Lost ATI CCC after bios update

Similar Messages

Maybe you are looking for