Lost audio and video in existing projects

In already finished HD-projects parts of video and audio clips (MXF-files, Motion- and MP4 files) can't be viewed and played in the viewer and canvas anymore. Video became black (thumbnails are visible) and audio is not audible while the waveform is available.
The problem seemed to be influenced by the rendered content of the timeline in the sequence.
So I removed all the rendered files in the Render folder with Render Manager and re-rendered the sequence with no positive results. Moving everything to a new project, reconnecting or re-importing the files into the same project make no difference at all.
Only when I'm importing the files into a new project the clips can fully be played.
Software and settings:
FCS 7.0.1
OSX 10.6.2
MXF-files Ikegami HS V10 (high end) imported via Calibrated Software (CalibratedMXFQstat)
Compressor XDCAM HD 422 10801 50 (50 Mb/s)
Sequence preset Apple ProRes 422 (HQ) 1920 x 1080 50i 48 kHz
AJA ioHD digital interface
All software and equipment is up to date.
Any suggestion?
Anton

I think I could solve my problem:
The CalibratedSoftware application CalibratedMXFOptions seemed to be switched back to the Demo license (it's not clear why?), which terminated the duration of the imported files to 30 seconds. Re-activating the proper license and using the QuickRefresh for FCP application updated these files and made FCP recognizing the proper duration of the MXF an MP4 files.
That was not enough. I opened a new project, saved it and opened parallel the 'damaged' project.
That was all!
Thanks
Anton

Similar Messages

  • Audio and Video Sync

    Hey Gang,
    Reaching the point of frustration with a relatively simple Imovie project I'm trying to create. I've imported 2 separate groups of .mov files created by a utility that extracted the video from a DVD (DVDxDV). In both cases, the problems began when I selected multiple files to import. The first file would come in okay but by the time the last one was imported the audio was completely out of sync and played the same section of audio for all the video. It seemed I could overcome this by importing the files one at a time until I found that even after doing this and having the files import correctly, over time the audio and video would get out of sync within imovie.
    i have all the imports in a particular event and begin to drag segments to my new project. If i close I movie and come back to it later, the audio and video in the project starts to become out of sync. It then usually starts to happen when I preview the video in the event window as well. Importing requires so much time that deleting entire events and projects and starting over is driving me bananas.
    Has anyone experienced this before or have any ideas as to what's going on?
    Imovie 08 build 7.1.2 (577)
    macbook with lots of free drive space.
    no updates are available for imovie.
    the problem is occurring within imovie before I export to anything.
    Help!
    Wayne

    I am having the same problem. I am trying to use different video clips for talks. Once I have more than one clip in the video library, it plays audio from the first clip for all video??? Would love to figure this out.

  • Audio and video not in sync. went back to previously finished projects and they too are not in sync. What could be the problem?

    Audio and video not in sync. Went back to previously edited projects and they too are now not in sync. What could be the problem?

    Um ... some useful data?
    OS/CPU/RAM/GPU/vRAM ... version of PrPro ... and other programs or plugi-ins/3rd-party apps involved ... footage type/codec/wrapper ... such things would be very useful.
    Neil

  • New Project will not save, re-open with accurate or matching audio and video.

    I filmed footage last week. Uploaded it into Premiere Elements and edited the footage in Elements, and saved my work as a project. I opened Elements this morning, and upon opening my saved project I was prompted by the program to locate the file. When I then selected the raw footage files, it loaded the project, but with audio and video out of order, not synced, etc.
    How do I save my work as a stand-alone project file with the audio and video synced as I intended, in a format that I can load, share, re-open and work on without having to re-locate the raw video?
    This seems to be a basic function of Video Editing software, so I hope it is something small I can adjust and move on from. Oh Also all the files, both project (.prel) and raw footage (.mov) are saved on the desktop of the computer i am using to run Premiere Elements.

    brjames1
    What version of Premiere Elements are you using and on what computer operating system is it running?
    After you have created a project and it has been saved, you should be expected to be able to reopen the project with the
    project as before the save/close (some discussion about rendered files remaining rendered, but essentially as written).
    When they do not, we can invoke the damaged project syndrome.
    The following is an Adobe document on that subject.
    Troubleshoot a damaged project file | Adobe Premiere Elements
    If you are getting "Where is the file....?" messages when re-opening a saved closed project, typical reasons
    a. you have moved, deleted, or renamed files and folders that were imported into the project after the save close...when
    you import media into a project, all you get are copies of the originals in the project. But the project needs to trace back
    to the originals in the hard drive location where those originals were when first imported into the project.
    b. if you store your source media on an external hard drive, the external hard drive may be malfunctioning and/or the
    drive letter of the external drive changing for a variety of reasons. Does any of that apply to you.
    Please review and consider, and then we can decide what next.
    Thanks.
    ATR

  • Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

    Adobe Captivate 7 Project How to make Rollover cations, audio, and video work in HTML format?

    Honestly, I don't even know why this is an option. The conversion to Flash is completely unusable.
    I have exported some things to Flash, and since I program in Flash all the time I was able to manipulate to work to some degree. Most text captions are built with multiple elements and completely fall apart.
    Sorry, I can't be of more help.

  • Recovery project automatically deleting all audio and video transitions

    When Premiere crashes, the recovery project has automatically removed all audio and video transitions. This has happened to one project about 3-4 times.. Has anybody seen this or has a solution?

    No ... but I'll just kick in here that it is good to have your auto-save set for not too long a time, and not a bad thing to manually save-as to an incremental every so often. It does mean your last couple few minutes of work need to be re-created, but ... that's nothing compared to losing a LOT of work.
    Neil

  • My synchronized clips (audio and video) have lost their compound clip icon after I bought the full version of FCP X, why is that?

    I have noticed a few changes to my FCP workflow after installing FCPX from the trial version I had before. I've noticed that when I sync audio and video files together via Clip > Synchronize Clips.. the icon at the top left corner of the thumnail is no longer there as it was in the trial version. I also have to right click and select 'open in timeline' to work on the files. I much preferred clicking on the thumnail's icon in the event library and it opening up in the timeline. Also Stabilization is missing from my video effects! How odd.

    I no longer have the trial version this is the point. Bought the 'release' version about 6 weeks ago. Still doesn't explain why the stabilization option randomly appears for some clips and not for others. Also would like to know if I can get the compound icon back on the thumbnails for synchonized clips.

  • Lost connection between audio and video

    Hello. Is there anyone out there that can explain why it does this Gyazo - 4c7ff4b6ffe628c097e099abeecab242.png when I'm dragging video, which was recorded toghether in Photo Booth on Mac. I want to drag the video together with the audio. I have done this before but now it just changed? Thanks.

    Select both the audio and video and right-click 'link'

  • DO i need some extra hardware interface for receving both Audio and video

    hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
    but my code is working fine for either one at a time.
    DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
    After running TX
    i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
    and when i give vfw://0 in Media Locater only live video is transmited.
    im using JMF1.1.2e.
    if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
    transmiter/server side code .first run TX on server
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class Tx extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    Vector targets;
    JList list;
    JButton startXmit;
    JButton rtcp;
    JButton update;
    JButton expiration;
    JButton statistics;
    JButton addTarget;
    JButton removeTarget;
    JTextField tf_remote_address;
    JTextField tf_remote_data_port;
    JTextField tf_media_file;
    JTextField tf_data_port;
    TargetListModel listModel;
    AVTransmitter avTransmitter;
    RTCPViewer rtcpViewer;
    JCheckBox cb_loop;
    Config config;
    public Tx() {
    setTitle( "JMF/RTP Transmitter");
         config= new Config();
         GridBagLayout gridBagLayout= new GridBagLayout();
         GridBagConstraints gbc;
         JPanel p= new JPanel();
         p.setLayout( gridBagLayout);
         JPanel localPanel= createLocalPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 0;
         gbc.gridy= 0;
         gbc.gridwidth= 2;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
         p.add( localPanel);
         JPanel targetPanel= createTargetPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 1;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
    p.add( targetPanel);
         JPanel mediaPanel= createMediaPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 2;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
    p.add( mediaPanel);
    JPanel buttonPanel= new JPanel();
    rtcp= new JButton( "RTCP Monitor");
    update= new JButton( "Transmission Status");
         update.setEnabled( false);
         rtcp.addActionListener( this);
         update.addActionListener( this);
         buttonPanel.add( rtcp);
         buttonPanel.add( update);
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 3;
    gbc.gridwidth= 2;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
         p.add( buttonPanel);
    getContentPane().add( p);
         list.addMouseListener( this);
         addWindowListener( this);
    pack();
    setVisible( true);
    private JPanel createMediaPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         JLabel label= new JLabel( "Media Locator:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         tf_media_file= new JTextField( 35);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
         p.add( tf_media_file);
         tf_media_file.setText( config.media_locator);
         cb_loop= new JCheckBox( "loop");
         startXmit= new JButton( "Start Transmission");
         startXmit.setEnabled( true);
         startXmit.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 2;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
         p.add( cb_loop);
         cb_loop.setSelected( true);
         cb_loop.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
         p.add( startXmit);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
         p.setBorder( titledBorder);
         return p;
    private JPanel createTargetPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         targets= new Vector();
         for( int i= 0; i < config.targets.size(); i++) {
         targets.addElement( config.targets.elementAt( i));
    listModel= new TargetListModel( targets);
    list= new JList( listModel);
         list.addKeyListener( this);
         list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
    JScrollPane scrollPane= new JScrollPane( list,
    ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
    ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
         gbc= new GridBagConstraints();
         gbc.gridx= 0;
         gbc.gridy= 0;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
         p.add( scrollPane);
    JPanel p1= new JPanel();
         p1.setLayout( gridBagLayout);
         JLabel label= new JLabel( "IP Address:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
         p1.add( label);
         tf_remote_address= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
         p1.add( tf_remote_address);
         label= new JLabel( "Data Port:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
         p1.add( label);
         tf_remote_data_port= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
         p1.add( tf_remote_data_port);     
    JPanel p2= new JPanel();
    addTarget= new JButton( "Add Target");     
    removeTarget= new JButton( "Remove Target");
         p2.add( addTarget);
         p2.add( removeTarget);
         addTarget.addActionListener( this);
         removeTarget.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 2;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.gridwidth= 2;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 20,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
         p1.add( p2);
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 0;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
         p.add( p1);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
         p.setBorder( titledBorder);
         return p;
    private JPanel createLocalPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         JLabel label= new JLabel( "IP Address:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         JTextField tf_local_host= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
         p.add( tf_local_host);
         try {
    String host= InetAddress.getLocalHost().getHostAddress();     
         tf_local_host.setText( host);
         } catch( UnknownHostException e) {
         label= new JLabel( "Data Port:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         tf_data_port= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
         p.add( tf_data_port);
         tf_data_port.setText( config.local_data_port);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
         p.setBorder( titledBorder);
         return p;
    public void actionPerformed( ActionEvent event) {
    Object source= event.getSource();
         if( source == addTarget) {
         String ip= tf_remote_address.getText().trim();
         String port= tf_remote_data_port.getText().trim();
         String localPort= tf_data_port.getText().trim();
         addTargetToList( localPort, ip, port);
         if( avTransmitter != null) {
         avTransmitter.addTarget( ip, port);
         } else if( source == removeTarget) {
         int index= list.getSelectedIndex();
         if( index != -1) {
              Target target= (Target) targets.elementAt( index);
              if( avTransmitter != null) {
         avTransmitter.removeTarget( target.ip, target.port);
              targets.removeElement( target);
              listModel.setData( targets);          
         } else if( source == startXmit) {
         if( startXmit.getLabel().equals( "Start Transmission")) {          
         int data_port= new Integer( tf_data_port.getText()).intValue();
              avTransmitter= new AVTransmitter( this, data_port);
         avTransmitter.start( tf_media_file.getText().trim(), targets);          
              avTransmitter.setLooping( cb_loop.isSelected());
         startXmit.setLabel( "Stop Transmission");
         } else if( startXmit.getLabel().equals( "Stop Transmission")) {
              avTransmitter.stop();
              avTransmitter= null;
              removeNonBaseTargets();
              listModel.setData( targets);
         startXmit.setLabel( "Start Transmission");          
         } else if( source == rtcp) {
         if( rtcpViewer == null) {
         rtcpViewer= new RTCPViewer();
         } else {
              rtcpViewer.setVisible( true);
              rtcpViewer.toFront();
         } else if( source == cb_loop) {
         if( avTransmitter != null) {
              avTransmitter.setLooping( cb_loop.isSelected());
    private void removeNonBaseTargets() {
         String localPort= tf_data_port.getText().trim();
         for( int i= targets.size(); i > 0;) {
         Target target= (Target) targets.elementAt( i - 1);
         if( !target.localPort.equals( localPort)) {
    targets.removeElement( target);
         i--;
    public void addTargetToList( String localPort,
                             String ip, String port) {     
    ListUpdater listUpdater= new ListUpdater( localPort, ip,
                                  port, listModel, targets);
    SwingUtilities.invokeLater( listUpdater);           
    public void rtcpReport( String report) {
         if( rtcpViewer != null) {
         rtcpViewer.report( report);
    public void windowClosing( WindowEvent event) {
         config.local_data_port= tf_data_port.getText().trim();
         config.targets= new Vector();
         for( int i= 0; i < targets.size(); i++) {
         Target target= (Target) targets.elementAt( i);
         if( target.localPort.equals( config.local_data_port)) {
              config.addTarget( target.ip, target.port);
         config.media_locator= tf_media_file.getText().trim();
         config.write();
    System.exit( 0);
    public void windowClosed( WindowEvent event) {
    public void windowDeiconified( WindowEvent event) {
    public void windowIconified( WindowEvent event) {
    public void windowActivated( WindowEvent event) {
    public void windowDeactivated( WindowEvent event) {
    public void windowOpened( WindowEvent event) {
    public void keyPressed( KeyEvent event) {
    public void keyReleased( KeyEvent event) {
    Object source= event.getSource();
         if( source == list) {
         int index= list.getSelectedIndex();
    public void keyTyped( KeyEvent event) {
    public void mousePressed( MouseEvent e) {
    public void mouseReleased( MouseEvent e) {
    public void mouseEntered( MouseEvent e) {
    public void mouseExited( MouseEvent e) {
    public void mouseClicked( MouseEvent e) {
    Object source= e.getSource();
         if( source == list) {
         int index= list.getSelectedIndex();
         if( index != -1) {
              Target target= (Target) targets.elementAt( index);
              tf_remote_address.setText( target.ip);
              tf_remote_data_port.setText( target.port);
         int index= list.locationToIndex( e.getPoint());
    public static void main( String[] args) {
    new Tx();
    class TargetListModel extends AbstractListModel {
    private Vector options;
    public TargetListModel( Vector options) {
         this.options= options;
    public int getSize() {
         int size;
         if( options == null) {
         size= 0;
         } else {
         size= options.size();
         return size;
    public Object getElementAt( int index) {
    String name;
    if( index < getSize()) {
         Target o= (Target)options.elementAt( index);
    name= o.localPort + " ---> " + o.ip + ":" + o.port;
         } else {
         name= null;
         return name;
    public void setData( Vector data) {
         options= data;
         fireContentsChanged( this, 0, data.size());
    class ListUpdater implements Runnable {
    String localPort, ip, port;
    TargetListModel listModel;
    Vector targets;
    public ListUpdater( String localPort, String ip, String port,
                   TargetListModel listModel, Vector targets) {
         this.localPort= localPort;
         this.ip= ip;
         this.port= port;
         this.listModel= listModel;
         this.targets= targets;
    public void run() {
    Target target= new Target( localPort, ip, port);
         if( !targetExists( localPort, ip, port)) {
         targets.addElement( target);
    listModel.setData( targets);
    public boolean targetExists( String localPort, String ip, String port) {
         boolean exists= false;
         for( int i= 0; i < targets.size(); i++) {
         Target target= (Target) targets.elementAt( i);
         if( target.localPort.equals( localPort)
         && target.ip.equals( ip)
              && target.port.equals( port)) {          
              exists= true;
         break;
         return exists;
    >>>>>>>>>>>>>>>>>
    import java.awt.*;
    import java.io.*;
    import java.net.InetAddress;
    import java.util.*;
    import javax.media.*;
    import javax.media.protocol.*;
    import javax.media.format.*;
    import javax.media.control.TrackControl;
    import javax.media.control.QualityControl;
    import javax.media.rtp.*;
    import javax.media.rtp.event.*;
    import javax.media.rtp.rtcp.*;
    public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
    ControllerListener {
    // Input MediaLocator
    // Can be a file or http or capture source
    private MediaLocator locator;
    private String ipAddress;
    private int portBase;
    private Processor processor = null;
    private RTPManager rtpMgrs[];
    private int localPorts[];
    private DataSource dataOutput = null;
    private int local_data_port;
    private Tx tx;
    public AVTransmitter( Tx tx, int data_port) {
         this.tx= tx;
         local_data_port= data_port;
    * Starts the transmission. Returns null if transmission started ok.
    * Otherwise it returns a string with the reason why the setup failed.
    public synchronized String start( String filename, Vector targets) {
         String result;
         locator= new MediaLocator( filename);
         // Create a processor for the specified media locator
         // and program it to output JPEG/RTP
         result = createProcessor();
         if (result != null) {
         return result;
         // Create an RTP session to transmit the output of the
         // processor to the specified IP address and port no.
         result = createTransmitter( targets);
         if (result != null) {
         processor.close();
         processor = null;
         return result;
         // Start the transmission
         processor.start();
         return null;
    * Use the RTPManager API to create sessions for each media
    * track of the processor.
    private String createTransmitter( Vector targets) {
         // Cheated. Should have checked the type.
         PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
         PushBufferStream pbss[] = pbds.getStreams();
         rtpMgrs = new RTPManager[pbss.length];
         localPorts = new int[ pbss.length];
         SessionAddress localAddr, destAddr;
         InetAddress ipAddr;
         SendStream sendStream;
         int port;
         SourceDescription srcDesList[];
         for (int i = 0; i < pbss.length; i++) {
         // for (int i = 0; i < 1; i++) {
         try {
              rtpMgrs[i] = RTPManager.newInstance();     
              port = local_data_port + 2*i;
              localPorts[ i]= port;
              localAddr = new SessionAddress( InetAddress.getLocalHost(),
                                  port);
              rtpMgrs.initialize( localAddr);          
              rtpMgrs[i].addReceiveStreamListener(this);
              rtpMgrs[i].addRemoteListener(this);
         for( int k= 0; k < targets.size(); k++) {
              Target target= (Target) targets.elementAt( k);
              int targetPort= new Integer( target.port).intValue();
              addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
              sendStream = rtpMgrs[i].createSendStream(dataOutput, i);          
              sendStream.start();
         } catch (Exception e) {
              e.printStackTrace();
              return e.getMessage();
         return null;
    public void addTarget( String ip, String port) {
         for (int i= 0; i < rtpMgrs.length; i++) {
         int targetPort= new Integer( port).intValue();
         addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
    public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
         try {
         SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                                  new Integer( port).intValue());
         mgr.addTarget( addr);
         tx.addTargetToList( localPort + "", ip, port + "");
         } catch( Exception e) {
         e.printStackTrace();
    public void removeTarget( String ip, String port) {
         try {     
         SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                                  new Integer( port).intValue());
         for (int i= 0; i < rtpMgrs.length; i++) {
         rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
         } catch( Exception e) {
         e.printStackTrace();
    boolean looping= true;
    public void controllerUpdate( ControllerEvent ce) {
         System.out.println( ce);
         if( ce instanceof DurationUpdateEvent) {
         Time duration= ((DurationUpdateEvent) ce).getDuration();
         System.out.println( "duration: " + duration.getSeconds());
         } else if( ce instanceof EndOfMediaEvent) {
         System.out.println( "END OF MEDIA - looping=" + looping);
         if( looping) {
         processor.setMediaTime( new Time( 0));
              processor.start();
    public void setLooping( boolean flag) {
         looping= flag;
    public void update( ReceiveStreamEvent event) {
         String timestamp= getTimestamp();
         StringBuffer sb= new StringBuffer();
         if( event instanceof InactiveReceiveStreamEvent) {
         sb.append( timestamp + " Inactive Receive Stream");
         } else if( event instanceof ByeEvent) {
         sb.append( timestamp + " Bye");
         } else {
         System.out.println( "ReceiveStreamEvent: "+ event);
         tx.rtcpReport( sb.toString());     
    public void update( RemoteEvent event) {     
         String timestamp= getTimestamp();
         if( event instanceof ReceiverReportEvent) {
         ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
         StringBuffer sb= new StringBuffer();
         sb.append( timestamp + " RR");
         if( rr != null) {
              Participant participant= rr.getParticipant();
              if( participant != null) {
              sb.append( " from " + participant.getCNAME());
              sb.append( " ssrc=" + rr.getSSRC());
              } else {
              sb.append( " ssrc=" + rr.getSSRC());
              tx.rtcpReport( sb.toString());
         } else {
         System.out.println( "RemoteEvent: " + event);
    private String getTimestamp() {
         String timestamp;
         Calendar calendar= Calendar.getInstance();
         int hour= calendar.get( Calendar.HOUR_OF_DAY);
         String hourStr= formatTime( hour);
         int minute= calendar.get( Calendar.MINUTE);
         String minuteStr= formatTime( minute);
         int second= calendar.get( Calendar.SECOND);
         String secondStr= formatTime( second);
         timestamp= hourStr + ":" + minuteStr + ":" + secondStr;     
         return timestamp;
    private String formatTime( int time) {     
         String timeStr;
         if( time < 10) {
         timeStr= "0" + time;
         } else {
         timeStr= "" + time;
         return timeStr;
    * Stops the transmission if already started
    public void stop() {
         synchronized (this) {
         if (processor != null) {
              processor.stop();
              processor.close();
              processor = null;
         for (int i= 0; i < rtpMgrs.length; i++) {
         rtpMgrs[ i].removeTargets( "Session ended.");
              rtpMgrs[ i].dispose();
    public String createProcessor() {
         if (locator == null) {
         return "Locator is null";
         DataSource ds;
         DataSource clone;
         try {
         ds = javax.media.Manager.createDataSource(locator);
         } catch (Exception e) {
         return "Couldn't create DataSource";
         // Try to create a processor to handle the input media locator
         try {
         processor = javax.media.Manager.createProcessor(ds);
         processor.addControllerListener( this);     
         } catch (NoProcessorException npe) {
         return "Couldn't create processor";
         } catch (IOException ioe) {
         return "IOException creating processor";
         // Wait for it to configure
         boolean result = waitForState(processor, Processor.Configured);
         if (result == false)
         return "Couldn't configure processor";
         // Get the tracks from the processor
         TrackControl [] tracks = processor.getTrackControls();
         // Do we have atleast one track?
         if (tracks == null || tracks.length < 1)
         return "Couldn't find tracks in processor";
         // Set the output content descriptor to RAW_RTP
         // This will limit the supported formats reported from
         // Track.getSupportedFormats to only valid RTP formats.
         ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
         processor.setContentDescriptor(cd);
         Format supported[];
         Format chosen;
         boolean atLeastOneTrack = false;
         // Program the tracks.
         for (int i = 0; i < tracks.length; i++) {
         Format format = tracks[i].getFormat();
         if (tracks[i].isEnabled()) {
              supported = tracks[i].getSupportedFormats();
              // We've set the output content to the RAW_RTP.
              // So all the supported formats should work with RTP.
              // We'll just pick the first one.
              if (supported.length > 0) {
              if (supported[0] instanceof VideoFormat) {
                   // For video formats, we should double check the
                   // sizes since not all formats work in all sizes.
                   chosen = checkForVideoSizes(tracks[i].getFormat(),
                                       supported[0]);
              } else
                   chosen = supported[0];
              tracks[i].setFormat(chosen);
              System.err.println("Track " + i + " is set to transmit as:");
              System.err.println(" " + chosen);
              atLeastOneTrack = true;
              } else
              tracks[i].setEnabled(false);
         } else
              tracks[i].setEnabled(false);
         if (!atLeastOneTrack)
         return "Couldn't set any of the tracks to a valid RTP format";
         // Realize the processor. This will internally create a flow
         // graph and attempt to create an output datasource for JPEG/RTP
         // audio frames.
         result = waitForState(processor, Controller.Realized);
         if (result == false)
         return "Couldn't realize processor";
         // Set the JPEG quality to .5.
         setJPEGQuality(processor, 0.5f);
         // Get the output data source of the processor
         dataOutput = processor.getDataOutput();
         return null;
    static SessionAddress destAddr1, destAddr2;
    * For JPEG and H263, we know that they only work for particular
    * sizes. So we'll perform extra checking here to make sure they
    * are of the right sizes.
    Format checkForVideoSizes(Format original, Format supported) {
         int width, height;
         Dimension size = ((VideoFormat)original).getSize();
         Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
         Format h263Fmt = new Format(VideoFormat.H263_RTP);
         if (supported.matches(jpegFmt)) {
         // For JPEG, make sure width and height are divisible by 8.
         width = (size.width % 8 == 0 ? size.width :
                        (int)(size.width / 8) * 8);
         height = (size.height % 8 == 0 ? size.height :
                        (int)(size.height / 8) * 8);
         } else if (supported.matches(h263Fmt)) {
         // For H.263, we only support some specific sizes.
         if (size.width < 128) {
              width = 128;
              height = 96;
         } else if (size.width < 176) {
              width = 176;
              height = 144;
         } else {
              width = 352;
              height = 288;
         } else {
         // We don't know this particular format. We'll just
         // leave it alone then.
         return supported;
         return (new VideoFormat(null,
                        new Dimension(width, height),
                        Format.NOT_SPECIFIED,
                        null,
                        Format.NOT_SPECIFIED)).intersects(supported);
    * Setting the encoding quality to the specified value on the JPEG encoder.
    * 0.5 is a good default.
    void setJPEGQuality(Player p, float val) {
         Control cs[] = p.getControls();
         QualityControl qc = null;
         VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
         // Loop through the controls to find the Quality control for
         // the JPEG encoder.
         for (int i = 0; i < cs.length; i++) {
         if (cs[i] instanceof QualityControl &&
              cs[i] instanceof Owned) {
              Object owner = ((Owned)cs[i]).getOwner();
              // Check to see if the owner is a Codec.
              // Then check for the output format.
              if (owner instanceof Codec) {
              Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
              for (int j = 0; j < fmts.length; j++) {
                   if (fmts[j].matches(jpegFmt)) {
                   qc = (QualityControl)cs[i];
                   qc.setQuality(val);
                   System.err.println("- Setting quality to " +
                             val + " on " + qc);
                   break;
              if (qc != null)
              break;
    * Convenience methods to handle processor's state changes.
    private Integer stateLock = new Integer(0);
    private boolean failed = false;
    Integer getStateLock() {
         return stateLock;
    void setFailed() {
         failed = true;
    private synchronized boolean waitForState(Processor p, int state) {
         p.addControllerListener(new StateListener());
         failed = false;
         // Call the required method on the processor
         if (state == Processor.Configured) {
         p.configure();
         } else if (state == Processor.Realized) {
         p.realize();
         // Wait until we get an event that confirms the
         // success of the method, or a failure event.
         // See StateListener inner class
         while (p.getState() < state && !failed) {
         synchronized (getStateLock()) {
              try {
              getStateLock().wait();
              } catch (InterruptedException ie) {
              return false;
         if (failed)
         return false;
         else
         return true;
    * Inner Classes
    class StateListener implements ControllerListener {
         public void controllerUpdate(ControllerEvent ce) {
         // If there was an error during configure or
         // realiz

    I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
    Hope It Works

  • Premiere Pro CC: audio and video is out of sync after export

    Hi folks! I downloaded trial version of Adobe Premiere Pro CC. Captured gameplay with bandicam in Motion Jpeg Format (as advised) 30 fps and made a 40 minutes lenght clip. But there is an issue: in my project audio is synchronized with video, but when i export - it's lost (and i think to further we watch video, the bigger is the synch gape between audio and video, in increases gradually). I tried various formats, tried to use option "delete rendered files" prior to export, tried "match source" option, tried to choose various drives for exporting - nothing helps.
    Help, how to solve this problem?

    Handbrake is a free-download program that takes variable-frame-rate footage and converts it to constant frame-rate. VFR to CFR, if you will.
    Going back to your reply to my first post, you noted there had been some kind of "hardlimit" to 30fps that you hadn't chosen. I'm guessing that would have made this track CFR, and what you've got instead is VFR. So you might try recording another bit after selecting that setting to hardlimit the frame-rate, and see if it works better through PrPro to export.
    Next ... so, you've got a 30fps probably VFR video track, and it appears a WAV file is your audio ... was that produced by the Bandicam program while it was recording your program? Or is it from another source and you pasted it into your sequence?
    Neil

  • Extra hardware interface for transmiting both Audio and video to client ??

    hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
    but my code is working fine for either one at a time.
    DO i need some extra hardware interface for Transmitting  both Audio and video to client im using code AVTransmit and AVReceive found from this site only
    After running TX
    i give dsound:// & vfw://0 in Media Locater only sound is received and no vedio
    and when i give vfw://0 in Media Locater only live video is transmited.
    im using JMF1.1.2e.
    if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
    transmiter/server side code .first run TX on server
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class Tx extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    Vector targets;
    JList list;
    JButton startXmit;
    JButton rtcp;
    JButton update;
    JButton expiration;
    JButton statistics;
    JButton addTarget;
    JButton removeTarget;
    JTextField tf_remote_address;
    JTextField tf_remote_data_port;
    JTextField tf_media_file;
    JTextField tf_data_port;
    TargetListModel listModel;
    AVTransmitter avTransmitter;
    RTCPViewer rtcpViewer;
    JCheckBox cb_loop;
    Config config;
    public Tx() {
    setTitle( "JMF/RTP Transmitter");
    config= new Config();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    JPanel p= new JPanel();
    p.setLayout( gridBagLayout);
    JPanel localPanel= createLocalPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 0;
    gbc.gridy= 0;
    gbc.gridwidth= 2;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
    p.add( localPanel);
    JPanel targetPanel= createTargetPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 1;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
    p.add( targetPanel);
    JPanel mediaPanel= createMediaPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 2;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
    p.add( mediaPanel);
    JPanel buttonPanel= new JPanel();
    rtcp= new JButton( "RTCP Monitor");
    update= new JButton( "Transmission Status");
    update.setEnabled( false);
    rtcp.addActionListener( this);
    update.addActionListener( this);
    buttonPanel.add( rtcp);
    buttonPanel.add( update);
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 3;
    gbc.gridwidth= 2;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
    p.add( buttonPanel);
    getContentPane().add( p);
    list.addMouseListener( this);
    addWindowListener( this);
    pack();
    setVisible( true);
    private JPanel createMediaPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    JLabel label= new JLabel( "Media Locator:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    tf_media_file= new JTextField( 35);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
    p.add( tf_media_file);
    tf_media_file.setText( config.media_locator);
    cb_loop= new JCheckBox( "loop");
    startXmit= new JButton( "Start Transmission");
    startXmit.setEnabled( true);
    startXmit.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 2;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
    p.add( cb_loop);
    cb_loop.setSelected( true);
    cb_loop.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
    p.add( startXmit);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
    p.setBorder( titledBorder);
    return p;
    private JPanel createTargetPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    targets= new Vector();
    for( int i= 0; i < config.targets.size(); i++) {
    targets.addElement( config.targets.elementAt( i));
    listModel= new TargetListModel( targets);
    list= new JList( listModel);
    list.addKeyListener( this);
    list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
    JScrollPane scrollPane= new JScrollPane( list,
    ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
    ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
    gbc= new GridBagConstraints();
    gbc.gridx= 0;
    gbc.gridy= 0;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
    p.add( scrollPane);
    JPanel p1= new JPanel();
    p1.setLayout( gridBagLayout);
    JLabel label= new JLabel( "IP Address:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
    p1.add( label);
    tf_remote_address= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
    p1.add( tf_remote_address);
    label= new JLabel( "Data Port:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
    p1.add( label);
    tf_remote_data_port= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
    p1.add( tf_remote_data_port);
    JPanel p2= new JPanel();
    addTarget= new JButton( "Add Target");
    removeTarget= new JButton( "Remove Target");
    p2.add( addTarget);
    p2.add( removeTarget);
    addTarget.addActionListener( this);
    removeTarget.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 2;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.gridwidth= 2;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 20,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
    p1.add( p2);
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 0;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
    p.add( p1);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
    p.setBorder( titledBorder);
    return p;
    private JPanel createLocalPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    JLabel label= new JLabel( "IP Address:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    JTextField tf_local_host= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
    p.add( tf_local_host);
    try {
    String host= InetAddress.getLocalHost().getHostAddress();
    tf_local_host.setText( host);
    } catch( UnknownHostException e) {
    label= new JLabel( "Data Port:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    tf_data_port= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
    p.add( tf_data_port);
    tf_data_port.setText( config.local_data_port);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
    p.setBorder( titledBorder);
    return p;
    public void actionPerformed( ActionEvent event) {
    Object source= event.getSource();
    if( source == addTarget) {
    String ip= tf_remote_address.getText().trim();
    String port= tf_remote_data_port.getText().trim();
    String localPort= tf_data_port.getText().trim();
    addTargetToList( localPort, ip, port);
    if( avTransmitter != null) {
    avTransmitter.addTarget( ip, port);
    } else if( source == removeTarget) {
    int index= list.getSelectedIndex();
    if( index != -1) {
    Target target= (Target) targets.elementAt( index);
    if( avTransmitter != null) {
    avTransmitter.removeTarget( target.ip, target.port);
    targets.removeElement( target);
    listModel.setData( targets);
    } else if( source == startXmit) {
    if( startXmit.getLabel().equals( "Start Transmission")) {
    int data_port= new Integer( tf_data_port.getText()).intValue();
    avTransmitter= new AVTransmitter( this, data_port);
    avTransmitter.start( tf_media_file.getText().trim(), targets);
    avTransmitter.setLooping( cb_loop.isSelected());
    startXmit.setLabel( "Stop Transmission");
    } else if( startXmit.getLabel().equals( "Stop Transmission")) {
    avTransmitter.stop();
    avTransmitter= null;
    removeNonBaseTargets();
    listModel.setData( targets);
    startXmit.setLabel( "Start Transmission");
    } else if( source == rtcp) {
    if( rtcpViewer == null) {
    rtcpViewer= new RTCPViewer();
    } else {
    rtcpViewer.setVisible( true);
    rtcpViewer.toFront();
    } else if( source == cb_loop) {
    if( avTransmitter != null) {
    avTransmitter.setLooping( cb_loop.isSelected());
    private void removeNonBaseTargets() {
    String localPort= tf_data_port.getText().trim();
    for( int i= targets.size(); i > 0;) {
    Target target= (Target) targets.elementAt( i - 1);
    if( !target.localPort.equals( localPort)) {
    targets.removeElement( target);
    i--;
    public void addTargetToList( String localPort,
    String ip, String port) {
    ListUpdater listUpdater= new ListUpdater( localPort, ip,
    port, listModel, targets);
    SwingUtilities.invokeLater( listUpdater);
    public void rtcpReport( String report) {
    if( rtcpViewer != null) {
    rtcpViewer.report( report);
    public void windowClosing( WindowEvent event) {
    config.local_data_port= tf_data_port.getText().trim();
    config.targets= new Vector();
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    if( target.localPort.equals( config.local_data_port)) {
    config.addTarget( target.ip, target.port);
    config.media_locator= tf_media_file.getText().trim();
    config.write();
    System.exit( 0);
    public void windowClosed( WindowEvent event) {
    public void windowDeiconified( WindowEvent event) {
    public void windowIconified( WindowEvent event) {
    public void windowActivated( WindowEvent event) {
    public void windowDeactivated( WindowEvent event) {
    public void windowOpened( WindowEvent event) {
    public void keyPressed( KeyEvent event) {
    public void keyReleased( KeyEvent event) {
    Object source= event.getSource();
    if( source == list) {
    int index= list.getSelectedIndex();
    public void keyTyped( KeyEvent event) {
    public void mousePressed( MouseEvent e) {
    public void mouseReleased( MouseEvent e) {
    public void mouseEntered( MouseEvent e) {
    public void mouseExited( MouseEvent e) {
    public void mouseClicked( MouseEvent e) {
    Object source= e.getSource();
    if( source == list) {
    int index= list.getSelectedIndex();
    if( index != -1) {
    Target target= (Target) targets.elementAt( index);
    tf_remote_address.setText( target.ip);
    tf_remote_data_port.setText( target.port);
    int index= list.locationToIndex( e.getPoint());
    public static void main( String[] args) {
    new Tx();
    class TargetListModel extends AbstractListModel {
    private Vector options;
    public TargetListModel( Vector options) {
    this.options= options;
    public int getSize() {
    int size;
    if( options == null) {
    size= 0;
    } else {
    size= options.size();
    return size;
    public Object getElementAt( int index) {
    String name;
    if( index < getSize()) {
    Target o= (Target)options.elementAt( index);
    name= o.localPort + " ---> " + o.ip + ":" + o.port;
    } else {
    name= null;
    return name;
    public void setData( Vector data) {
    options= data;
    fireContentsChanged( this, 0, data.size());
    class ListUpdater implements Runnable {
    String localPort, ip, port;
    TargetListModel listModel;
    Vector targets;
    public ListUpdater( String localPort, String ip, String port,
    TargetListModel listModel, Vector targets) {
    this.localPort= localPort;
    this.ip= ip;
    this.port= port;
    this.listModel= listModel;
    this.targets= targets;
    public void run() {
    Target target= new Target( localPort, ip, port);
    if( !targetExists( localPort, ip, port)) {
    targets.addElement( target);
    listModel.setData( targets);
    public boolean targetExists( String localPort, String ip, String port) {
    boolean exists= false;
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    if( target.localPort.equals( localPort)
    && target.ip.equals( ip)
    && target.port.equals( port)) {
    exists= true;
    break;
    return exists;
    import java.awt.*;
    import java.io.*;
    import java.net.InetAddress;
    import java.util.*;
    import javax.media.*;
    import javax.media.protocol.*;
    import javax.media.format.*;
    import javax.media.control.TrackControl;
    import javax.media.control.QualityControl;
    import javax.media.rtp.*;
    import javax.media.rtp.event.*;
    import javax.media.rtp.rtcp.*;
    public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
    ControllerListener {
    // Input MediaLocator
    // Can be a file or http or capture source
    private MediaLocator locator;
    private String ipAddress;
    private int portBase;
    private Processor processor = null;
    private RTPManager rtpMgrs[];
    private int localPorts[];
    private DataSource dataOutput = null;
    private int local_data_port;
    private Tx tx;
    public AVTransmitter( Tx tx, int data_port) {
    this.tx= tx;
    local_data_port= data_port;
    * Starts the transmission. Returns null if transmission started ok.
    * Otherwise it returns a string with the reason why the setup failed.
    public synchronized String start( String filename, Vector targets) {
    String result;
    locator= new MediaLocator( filename);
    // Create a processor for the specified media locator
    // and program it to output JPEG/RTP
    result = createProcessor();
    if (result != null) {
    return result;
    // Create an RTP session to transmit the output of the
    // processor to the specified IP address and port no.
    result = createTransmitter( targets);
    if (result != null) {
    processor.close();
    processor = null;
    return result;
    // Start the transmission
    processor.start();
    return null;
    * Use the RTPManager API to create sessions for each media
    * track of the processor.
    private String createTransmitter( Vector targets) {
    // Cheated. Should have checked the type.
    PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
    PushBufferStream pbss[] = pbds.getStreams();
    rtpMgrs = new RTPManager[pbss.length];
    localPorts = new int[ pbss.length];
    SessionAddress localAddr, destAddr;
    InetAddress ipAddr;
    SendStream sendStream;
    int port;
    SourceDescription srcDesList[];
    for (int i = 0; i < pbss.length; i++) {
    // for (int i = 0; i < 1; i++) {
    try {
    rtpMgrs[i] = RTPManager.newInstance();
    port = local_data_port + 2*i;
    localPorts[ i]= port;
    localAddr = new SessionAddress( InetAddress.getLocalHost(),
    port);
    rtpMgrs.initialize( localAddr);
    rtpMgrs[i].addReceiveStreamListener(this);
    rtpMgrs[i].addRemoteListener(this);
    for( int k= 0; k < targets.size(); k++) {
    Target target= (Target) targets.elementAt( k);
    int targetPort= new Integer( target.port).intValue();
    addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
    sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
    sendStream.start();
    } catch (Exception e) {
    e.printStackTrace();
    return e.getMessage();
    return null;
    public void addTarget( String ip, String port) {
    for (int i= 0; i < rtpMgrs.length; i++) {
    int targetPort= new Integer( port).intValue();
    addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
    public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
    try {
    SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
    new Integer( port).intValue());
    mgr.addTarget( addr);
    tx.addTargetToList( localPort + "", ip, port + "");
    } catch( Exception e) {
    e.printStackTrace();
    public void removeTarget( String ip, String port) {
    try {
    SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
    new Integer( port).intValue());
    for (int i= 0; i < rtpMgrs.length; i++) {
    rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
    } catch( Exception e) {
    e.printStackTrace();
    boolean looping= true;
    public void controllerUpdate( ControllerEvent ce) {
    System.out.println( ce);
    if( ce instanceof DurationUpdateEvent) {
    Time duration= ((DurationUpdateEvent) ce).getDuration();
    System.out.println( "duration: " + duration.getSeconds());
    } else if( ce instanceof EndOfMediaEvent) {
    System.out.println( "END OF MEDIA - looping=" + looping);
    if( looping) {
    processor.setMediaTime( new Time( 0));
    processor.start();
    public void setLooping( boolean flag) {
    looping= flag;
    public void update( ReceiveStreamEvent event) {
    String timestamp= getTimestamp();
    StringBuffer sb= new StringBuffer();
    if( event instanceof InactiveReceiveStreamEvent) {
    sb.append( timestamp + " Inactive Receive Stream");
    } else if( event instanceof ByeEvent) {
    sb.append( timestamp + " Bye");
    } else {
    System.out.println( "ReceiveStreamEvent: "+ event);
    tx.rtcpReport( sb.toString());
    public void update( RemoteEvent event) {
    String timestamp= getTimestamp();
    if( event instanceof ReceiverReportEvent) {
    ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
    StringBuffer sb= new StringBuffer();
    sb.append( timestamp + " RR");
    if( rr != null) {
    Participant participant= rr.getParticipant();
    if( participant != null) {
    sb.append( " from " + participant.getCNAME());
    sb.append( " ssrc=" + rr.getSSRC());
    } else {
    sb.append( " ssrc=" + rr.getSSRC());
    tx.rtcpReport( sb.toString());
    } else {
    System.out.println( "RemoteEvent: " + event);
    private String getTimestamp() {
    String timestamp;
    Calendar calendar= Calendar.getInstance();
    int hour= calendar.get( Calendar.HOUR_OF_DAY);
    String hourStr= formatTime( hour);
    int minute= calendar.get( Calendar.MINUTE);
    String minuteStr= formatTime( minute);
    int second= calendar.get( Calendar.SECOND);
    String secondStr= formatTime( second);
    timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
    return timestamp;
    private String formatTime( int time) {
    String timeStr;
    if( time < 10) {
    timeStr= "0" + time;
    } else {
    timeStr= "" + time;
    return timeStr;
    * Stops the transmission if already started
    public void stop() {
    synchronized (this) {
    if (processor != null) {
    processor.stop();
    processor.close();
    processor = null;
    for (int i= 0; i < rtpMgrs.length; i++) {
    rtpMgrs[ i].removeTargets( "Session ended.");
    rtpMgrs[ i].dispose();
    public String createProcessor() {
    if (locator == null) {
    return "Locator is null";
    DataSource ds;
    DataSource clone;
    try {
    ds = javax.media.Manager.createDataSource(locator);
    } catch (Exception e) {
    return "Couldn't create DataSource";
    // Try to create a processor to handle the input media locator
    try {
    processor = javax.media.Manager.createProcessor(ds);
    processor.addControllerListener( this);
    } catch (NoProcessorException npe) {
    return "Couldn't create processor";
    } catch (IOException ioe) {
    return "IOException creating processor";
    // Wait for it to configure
    boolean result = waitForState(processor, Processor.Configured);
    if (result == false)
    return "Couldn't configure processor";
    // Get the tracks from the processor
    TrackControl [] tracks = processor.getTrackControls();
    // Do we have atleast one track?
    if (tracks == null || tracks.length < 1)
    return "Couldn't find tracks in processor";
    // Set the output content descriptor to RAW_RTP
    // This will limit the supported formats reported from
    // Track.getSupportedFormats to only valid RTP formats.
    ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
    processor.setContentDescriptor(cd);
    Format supported[];
    Format chosen;
    boolean atLeastOneTrack = false;
    // Program the tracks.
    for (int i = 0; i < tracks.length; i++) {
    Format format = tracks[i].getFormat();
    if (tracks[i].isEnabled()) {
    supported = tracks[i].getSupportedFormats();
    // We've set the output content to the RAW_RTP.
    // So all the supported formats should work with RTP.
    // We'll just pick the first one.
    if (supported.length > 0) {
    if (supported[0] instanceof VideoFormat) {
    // For video formats, we should double check the
    // sizes since not all formats work in all sizes.
    chosen = checkForVideoSizes(tracks[i].getFormat(),
    supported[0]);
    } else
    chosen = supported[0];
    tracks[i].setFormat(chosen);
    System.err.println("Track " + i + " is set to transmit as:");
    System.err.println(" " + chosen);
    atLeastOneTrack = true;
    } else
    tracks[i].setEnabled(false);
    } else
    tracks[i].setEnabled(false);
    if (!atLeastOneTrack)
    return "Couldn't set any of the tracks to a valid RTP format";
    // Realize the processor. This will internally create a flow
    // graph and attempt to create an output datasource for JPEG/RTP
    // audio frames.
    result = waitForState(processor, Controller.Realized);
    if (result == false)
    return "Couldn't realize processor";
    // Set the JPEG quality to .5.
    setJPEGQuality(processor, 0.5f);
    // Get the output data source of the processor
    dataOutput = processor.getDataOutput();
    return null;
    static SessionAddress destAddr1, destAddr2;
    * For JPEG and H263, we know that they only work for particular
    * sizes. So we'll perform extra checking here to make sure they
    * are of the right sizes.
    Format checkForVideoSizes(Format original, Format supported) {
    int width, height;
    Dimension size = ((VideoFormat)original).getSize();
    Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
    Format h263Fmt = new Format(VideoFormat.H263_RTP);
    if (supported.matches(jpegFmt)) {
    // For JPEG, make sure width and height are divisible by 8.
    width = (size.width % 8 == 0 ? size.width :
    (int)(size.width / 8) * 8);
    height = (size.height % 8 == 0 ? size.height :
    (int)(size.height / 8) * 8);
    } else if (supported.matches(h263Fmt)) {
    // For H.263, we only support some specific sizes.
    if (size.width < 128) {
    width = 128;
    height = 96;
    } else if (size.width < 176) {
    width = 176;
    height = 144;
    } else {
    width = 352;
    height = 288;
    } else {
    // We don't know this particular format. We'll just
    // leave it alone then.
    return supported;
    return (new VideoFormat(null,
    new Dimension(width, height),
    Format.NOT_SPECIFIED,
    null,
    Format.NOT_SPECIFIED)).intersects(supported);
    * Setting the encoding quality to the specified value on the JPEG encoder.
    * 0.5 is a good default.
    void setJPEGQuality(Player p, float val) {
    Control cs[] = p.getControls();
    QualityControl qc = null;
    VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
    // Loop through the controls to find the Quality control for
    // the JPEG encoder.
    for (int i = 0; i < cs.length; i++) {
    if (cs[i] instanceof QualityControl &&
    cs[i] instanceof Owned) {
    Object owner = ((Owned)cs[i]).getOwner();
    // Check to see if the owner is a Codec.
    // Then check for the output format.
    if (owner instanceof Codec) {
    Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
    for (int j = 0; j < fmts.length; j++) {
    if (fmts[j].matches(jpegFmt)) {
    qc = (QualityControl)cs[i];
    qc.setQuality(val);
    System.err.println("- Setting quality to " +
    val + " on " + qc);
    break;
    if (qc != null)
    break;
    * Convenience methods to handle processor's state changes.
    private Integer stateLock = new Integer(0);
    private boolean failed = false;
    Integer getStateLock() {
    return stateLock;
    void setFailed() {
    failed = true;
    private synchronized boolean waitForState(Processor p, int state) {
    p.addControllerListener(new StateListener());
    failed = false;
    // Call the required method on the processor
    if (state == Processor.Configured) {
    p.configure();
    } else if (state == Processor.Realized) {
    p.realize();
    // Wait until we get an event that confirms the
    // success of the method, or a failure event.
    // See StateListener inner class
    while (p.getState() < state && !failed) {
    synchronized (getStateLock()) {
    try {
    getStateLock().wait();
    } catch (InterruptedException ie) {
    return false;
    if (failed)
    return false;
    else
    return true;
    * Inner Classes
    class StateListener implements ControllerListener {
    public void controllerUpdate(ControllerEvent ce) {
    // If there was an error during configure or
    // realize, the processor will be closed
    if (ce instanceof ControllerClosedEvent)
    setFailed();
    // All controller events, send a notification
    // to the waiting thread in waitForState method.
    if (ce instanceof ControllerEvent) {
    synchronized (getStateLock()) {
    getStateLock().notifyAll();
    import java.io.*;
    import java.util.*;
    public class Config {
    private String pathPrefix;
    public String local_data_port;
    public Vector targets;
    public String media_locator;
    public Config() {
    pathPrefix= System.getProperty( "user.home") + File.separator;
    read();
    public void read() {
    targets= new Vector();
    try {
    String path= pathPrefix + "xmit.dat";
    FileInputStream fin= new FileInputStream( path);
    BufferedInputStream bin= new BufferedInputStream( fin);
    DataInputStream din= new DataInputStream( bin);
    local_data_port= readString( din);
    int n_targets= din.readInt();
    for( int i= 0; i < n_targets; i++) {
    String ip= readString( din);
    String port= readString( din);
    targets.addElement( new Target( local_data_port, ip, port));
    media_locator= readString( din);
    fin.close();
    } catch( IOException e) {
    System.out.println( "xmit.dat file missing!");
    local_data_port= "";
    media_locator= "";
    public void write() {
    try {
    String path= pathPrefix + "xmit.dat";
    FileOutputStream fout= new FileOutputStream( path);
    BufferedOutputStream bout= new BufferedOutputStream( fout);
    DataOutputStream dout= new DataOutputStream( bout);
    writeString( dout, local_data_port);
    dout.writeInt( targets.size());
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    writeString( dout, target.ip);
    writeString( dout, target.port);
    writeString( dout, media_locator);
    dout.flush();
    dout.close();
    fout.close();
    } catch( IOException e) {
    System.out.println( "Error writing xmit.dat!");
    public String readString( DataInputStream din) {
    String s= null;
    try {
    short length= din.readShort();
    if( length > 0) {
    byte buf[]= new byte[ length];
    din.read( buf, 0, length);
    s= new String( buf);
    } catch( IOException e) {
    System.err.println( e);
    return s;
    public void writeString( DataOutputStream dout, String str) {
    try {
    if( str != null) {
    dout.writeShort( str.length());
    dout.writeBytes( str);
    } else {
    dout.writeShort( 0);
    } catch( Exception e) {
    e.printStackTrace();
    public void addTarget( String ip, String port) {
    targets.addElement( new Target( "", ip, port));
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class RTCPViewer extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    private JList list;
    private Vector reports;
    private RtcpListModel listModel;
    private JButton clear;
    private JButton start;
    private boolean recording;
    public RTCPViewer() {
    setTitle( "JMF/RTCP Tracer");
    re

    I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
    Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems...

  • I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am warned that I will not be able to use this video in existing projects   How do I point iMovie to events in my external  hard drive so I can pl

    I have copied videos onto an external hard drive. to free memory on my macbook. When I try to delete these I am woarned that I will not be able to use this video in existing projects
    How do I point iMovie to events in my external  hard drive so I can play projects which use them?
    MacBook, iMovie 9.0.4

    Hi
    You can do this - by not doing it the way You describe as it will not work.
    a. the external hard disk - MUST BE - Mac OS extended (hfs) formatted -
    UNIX/DOS/FAT32/Mac OS Exchange - will work for most things - BUT NOT FOR VIDEO (iMovie, iDVD or FinalCut doesn't matter)
    b. Do not alter or move any folder named
    • iMovie Event's - or -
    • iMovie Project's
    on DeskTop/Finder - at all
    All moving's of Events and Projects must be done within the iMovie Application - then connections will not break.
    (move them back and see if iMovie remembers them - then do move as described above)
    Yours Bengt W

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Audio and Video issue with Windows 8.1 upgrade on Ideapad n585

    I upgraded my Ideapad N585 to Windows 8.1 the other day, took forever, but it made it through.  Unfortunately, I now get boot erors for the Dolby software, and the AMD Vision/Catalysyt Control Center.  Neither of these programs are able to start, from startup or even manually.  They just won't run.  Sound seems to come out fine still, but I do have video issues. 
    First off, my computer doesn't seem to recognize a HDtv as a monitor through the HDMI port.  I still get an image, but it's set to current screen resolution instead of 1080i.  I tried using the detect button to force it to look for a second monitor (my TV), but it showed nothing connected, though at the time I was using two screens.  Now my monitor's screen resolution seems to be a little higher than my TV's, but it doesn't fit the screen properly, and will sometimes put a black border around the desktop, not using the full screen.  I have also noticed, that when plugged into the tv, if a background program like a screen saver starts (and I am one of the few people who still use them, I like BOINC, sue me), it will reset the screen resolution to what it requires.  When the program exits, the screen resolution stays, and that becomes the new max screen resolution until I restart the computer.  So far, it only does this through the tv, if I run the laptop monitor alone, it doesn't happen.
    I did try updating the software with what's available through the support site, but nothing happened.  I even went as far as to use the Windows 9x~XP standbys of completely uninstalling, manually removing everything from the system registry I could find relating to these two programs, and then finally reinstalling the software.  Giving the audio and video a complete clean slate to work from, and got no positive results.  I restart the computer, Dolby and Catalyst won't boot, and blind to HDtv.  Problems as described above still apply.
    Anybody else have this issue?  Anybody got a fix?

    have you found a solution to this?
    My computer updated to 8.1 without my wanting it to, I have the same problems as you. I installed the video driver because the brightness was locked on what I had it. (the bar would move but did not change)
    I searched for brightness and n585 and I was able to find a driver, now brightness works but HDMI still does not. When I plug in the TV both screens go black with all 4 options in the "project" screen.
    *edit*
    this worked for me i stumbled across this
    I unplugged the power cable with the hdmi cable plugged in. Hit (windows key+p) scrolled to duplicate and it worked.I plugged in the power cord back in and it still worked. 

  • 8.1 Pro install now have no audio and video play

    I have an older G60-443cl and changed out the HDD for a SDD.  Installed a new version of Windows 8.1 Pro.  Everything works but my audio and video.  The audio drivers are installed and working properly (according to my system) but even on the speaker icon where you adjust the volume there is no sound not even the little beep when you change the volume.  I went to my adminastrative tools and checked and the following is what i guess i should have:
    Open windows Control Panel, open Administrative Tools and open Services.  Check that the following services are all showing as Status= Started and Startup Type= Automatic
    Audio Service
    Multimedia Class Scheduler
    Windows Audio
    Windows Audio Endpoint Builder
    I have all of the item but the top one Audio Service????     Help!!!!! Please!

    Hi @L1215 ,
    Welcome to the HP Forums!
    It is a grand place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that after changing the drive to a SSD and installing Windows 8.1 Pro you lost your audio.  Drivers are showing as installed and working properly but you have not audio.
    When I checked the driver page for your notebook I noticed that Windows 8.1 is not a supported Operating System.  With this being said HP does not provide the drivers as it is an untested OS on your system.  OEM's may and sometimes do alter drivers to perform correctly with your system.
    Downloading or Updating Software and Drivers for HP Computers
    Here is a link to No Sound from Speakers (Windows 8) to aid in overcoming this difficulty.
    The best of luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for

  • Problem in displaying records in multi record block

    Hi all, I have a problem in displaying records in a multi record block in a form. I have 1 control block and 1 data block(multi-record block). Control block has one item CUSTOMER-ID. Data block has many other items related to customer. when a value i

  • Exception while trying to deploy to portal

    Dear all, I have a serious deploy problem with the SAPNWCE71TrialSP1Preview_DevStudio in combination with SAP WAS... This is the error message Reason: Clusterwide exception: server ID 23000550:com.sap.engine.services.deploy.exceptions.ServerDeploymen

  • Instructions How To Add Web Apps

    Can someone tell me how to add web apps like the games and flashlight. I'm having a mental block lol Theres no download button on the apple site or in itunes that ive found. Thanks!

  • Encoding quality in DSP 4

    Hello. I'm having trouble with the encoding quality in DSP. I exported a short film from FCP in DVC Pro HD format in quicktime. It looks great in the computer. However, when I import it into DSP and it encodes it, the final product looks very poor. F

  • Length of a Movie in iMovie'11

    I'm wondering if anyone knows the largest length of a movie you can make with iMovie'11. I'm putting together a wedding video for a friend, and I can't get it to fit on a disk. Right now I'm using the "Large" size. Does anyone know? What about for Me