Lost BT Modem Function with N95

Until I did a SECOND Firmware upgrade (first was to 20.0.015, second to 21.0.016), I was able to use my N95 as a modem via BT with my Palm TX. Now, when I attempt to connect, a BT connection is established followed by a 3G/3.5G data connection visible on the N95's screen as the solid bi-directional arrows. However, as my Palm is doing it's "Signing On" routine, I notice that the N95 data connection drops. Every single time at the same place in the sign-on. This is followed by a "Time Out" message on the Palm.
If I have the Connection Manager open to Active Connections while trying to make the Modem Connection, "Modem Connecting" does appear for several encouraging seconds, but then disappears as the data connection fails.
I've received new configurations from my provider, and internet connectivity is fine directly from the N95 alone. I can't explain why the Palm can make the BT connection, generate an initial 3G data connection, yet fail at what appears to be the final stage of authentication. My Palm configuration has NOT changed. There are no error messages from the N95, and only the "PPP timeout" from the Palm.
Ideas?

grschinon,
As we both suspected, it was the N95. Nothing to do with the Palm, on which nothing had been changed. Basically, my O2 support tech had me manually create a new AP. It differed only slightly from the original one I created (with O2 direction) when I initially set the phone up. But, both manual configurations were completely different from automated configurations delivered to me via SMS.
The slight difference between the two manual configurations? Explicitly specified DNS IP addresses.
So, that put all to right, and to great relief. I should have stopped there, but NO! I decided to DELETE what I assumed to be the non-functional configuration (supplied via SMS). After having done so, my N95 continued to work as a modem, but my Truphone wizard couldn't "see" my manually created 3G AP! So, I re-saved my SMS-delivered configuration, and this resulted in a 3G AP which is visible to and works with Truphone. I still don't understand what about the manual configuration renders it "invisible" to Truphone -- other applications (Google Mail, browser) cab see it just fine.
So, now, things are working as usual. None of this was intuitive. I'll see how this works when roaming outside of O2's network.

Similar Messages

With installation of 10.1 I lost finder search function. The finder window appears, but no matter what I put in the search window, nothing is found. I re-installed it with initial success, but it failed again very soon.

With installation of 10.1 I lost finder search function. The finder window appears, but no matter what I put in the search window, nothing is found. I re-installed it with initial success, but it failed again very soon.
MacBook Pro (15-inch, Mid 2010)
OS X 10.10.1

Hey Reoh,
Thank you for contributing to the Apple Support Communities.
If searching for files in Finder doesn't return any results, try using the steps in this article to reindex the Spotlight search index of your MacBook Pro hard drive:
Spotlight: How to re-index folders or volumes - Apple Support
Sincerely,
Jeremy

IOS7 lost functionality with Ford Fiesta?

So here is the deal. My friend has a Ford Fiesta 2011. Everything was fine with her iPhone 4s when it had iOS6, however as soon as she updated to iOS7 the track selection no longers works on her steering wheel, and only works when changed from the phone itself. Any ideas how to make the phone work in full function with the car again?

I know that you have solved your problem but I found after I updated to iOS7 that my remote controls for my iPhone in my car would not work. Once I updated to iOS7.0.2, the remote controls started to work again.
I would recommend that people update to 7.0.2 if they have lost external control of their phones in their cars or other remote devices.

Lost functionality with Leopard...

Lost functionality with Leopard upgrade....
1 - AOL for Mac OS X (10.3.7) application: can't access email addresses when writing mail and can't attach files.
2 - Canon's MP Navigator (2.2.2) won't batch scan documents with MP830. Worked fine with Tiger.
3 - Can't mount USB hard drive attached to my airport extreme and when I try the extreme goes offline and I have to restart it.
How about you all. I only used 'em all the time.

I have the same problem.
After upgrade from my Mac Pro to Mac OS X Lion yesterday, the same problem happened described by danhalli.
No connection to the printer over 2101nw. The MAC gets all information if an other computer makes a connection to the print server, so the communication works, however connection cannot be established.
There was no way to fix it. complete new installation from Printer Software or wireless HP Print Server did not help.
Important: all other computer in the network are working fine with the connection manager (MAC and Microsoft PC´s)
All MAC computer are working fine with the SW 10.6.8 . The SW 10.7.2 does not work I hope it will be fixed soon. If you can not print, it takes a lot of time !!!!

HP Photosmart 8150 or 8050 fully functional with Windows 7?

I just purchased a used 8150 Photosmart printer due to failure of feeder mechanism on another older Photosmart printer. Lost my PC, monitor and scanner to a lightning strike the following day. A computer technician tells me my 8150 can't print photos at all from my new PC with Windows 7 as I can no longer download the necessary Photosmart Essential software from HP. Is this correct or is it still fully functional?
On the other hand, would it be easier to buy a newer Photosmart printer? Is an 8050 Photosmart fully functional with Windows 7? It looks to have a driver download and so forth, but I want to make sure before I go out and buy yet another printer that isn't fully functional. I loved the Photosmart Essential software that came with the 8150 and 8050, and would like to continue printing photos using similar software.

Hi,
It's correct in one way: Photosmart Essential software has been replaced with a new software called HP Proto creations. You can download from the following link:
http://www.hp.com/global/us/en/consumer/digital_photography/free/software/photo-creations.html
And Yes, no more driver support for the old 8150 from the Vista ages or at least 5 years now. Buying new printer would be the way to go if you wish to get better photo prints otherwise just waisting inks (very expensive) and papers.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to implement copy paste functionality with IE

Hi Experts,
I am working on jdev 11.1.1.6.0, I have requirement to implement copy & paste functionality with IE Browser in ADF table. I have followed below link to implement the functionality.
http://one-size-doesnt-fit-all.blogspot.com/2011/04/aftable-restoring-basic-browser-copy.html
But copy&functionality is working fine, but when table loading I lost vertical/horizontal scroll bar. Can any one suggest me what is wrong here/what i am missing here.
My logic:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:c="http://java.sun.com/jsp/jstl/core"
          xmlns:sni="/SNIDeclarativeComponentLib">
<c:set var="tumuiBundle" value="#{adfBundle['sni.tum.view.TestUIBundle']}"/>
<af:resource type="javascript">
    var globalLastVisitedField = null;
    function captureTableFieldName()
      return function (evt)
        evt.cancel();
        globalLastVisitedField = evt.getSource();
    function copyMenu(evt)
      if (globalLastVisitedField == null)
        alert("copyMenu() Error: No field could be
                                 identified to be in focus");
      else if (navigator.appName != "Microsoft Internet
                                 Explorer")
        alert("Copy function is only
                                 supported in Microsoft Internet Explorer");
      else
        var txt = globalLastVisitedField.getProperty("ItemValue");
        window.clipboardData.setData('Text', "" + txt);
      evt.cancel();
</af:resource>
<af:subform id="f1" defaultCommand="srchcb">
    <af:panelStretchLayout id="psl1" topHeight="auto" bottomHeight="auto"
                           styleClass="AFStretchWidth">
      <f:facet name="center">
        <af:panelCollection id="tab" styleClass="AFStretchWidth">
          <af:table value="#{bindings.TestVO.collectionModel}"
                    var="row"
                    rows="#{bindings.TestVO.rangeSize}"
                    emptyText="#{bindings.TestVO.viewable ? 'No data to display.' : 'Access Denied.'}"
                    fetchSize="#{bindings.TestVO.rangeSize}"
                    rowBandingInterval="1"
                    selectionListener="#{bindings.TestVO.collectionModel.makeCurrent}"
                    rowSelection="multiple"
                    id="Table" styleClass="AFStretchWidth"
                    contentDelivery="immediate">
            <f:facet name="contextMenu">
              <af:popup id="pMenu" contentDelivery="lazyUncached">
                <af:menu id="mMenu">
                  <af:commandMenuItem text="Copy" id="cmiCopy">
                    <af:clientListener method="copyMenu" type="action"/>
                  </af:commandMenuItem>
                </af:menu>
              </af:popup>
            </f:facet>
            <af:column sortProperty="Name" sortable="true"
                       headerText="#{bindings.TestVO.hints.Name.label}"
                       id="c33">
              <af:outputText value="#{row.Name}" id="Nam">
                <af:clientListener method="captureTableFieldName()"
                                   type="contextMenu"></af:clientListener>
                <af:clientAttribute name="ItemValue"
                                    value="#{row.Name}"></af:clientAttribute>
              </af:outputText>
   </af:column?
   </af:Table>
-Thanks.

Hi,
I can't tell. What I can tell is that the code in the sample you reference for sure doesn't cause this - but it doesn't help you I guess.
Btw.: Here is a solution that works on all browsers. The solution in the blog (Chris - please forgive me) is a bit awkward to be honest.
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/012-copy-table-cell-values-169137.pdf
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/tablecellcopypaste-168499.zip
Frank

I have suddenly lost the scrolling function in mail. In all other programs it still works. Can anyone provide a solution?

I have suddenly lost cthe scrolling function in mail and cannot scroll down an individual email or the list of emails in a box. The scrolling function is perfectly okay in all other programs. Can anyone help, please?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Another example would be a p2p link between two L3 switches.

Lost my home network with Hub 3

This week I moved house and to switched from Sky unlimited to BT. I seem to have lost all functionality with this Hub! All efforts to get it working have failed. Help please.
On my Sky router I had a home network of 2 laptops, one on XP and other on Windows 8 + HP 1102w wireless printer + LG Network Attached Storage. They all showed up on the network or could be mapped as network drives.
I do have Internet. But the problem is now neither computer can see the other or the printer or the NAS.
Nothing is 'connected'. My network seems to have disappeared and there is no way into it through this Hub.
I have re-set, re-started and checked settings endlessly. Connected with cables and attempted wirelessly. Nothing is connected, as if there is no network
Why? All my equipment is the same as with Sky. The only new variable is the BT Hub. Only that item. So where has the network gone? Is the router faulty. Any assistance gratefully received.

Thanks for the reply. I'm desperate. Yes I have the Hub 3 and have spent days looking for my network! Nothing works, only Internet.
Am I missing something here? The Hub 3 is NOT a router, it's something different and ate my network or something?
Would it be easier just throwing it away and using any router. The old Sky one or one a Netgear or something from the computer store? I've never had this problem before.
Please advise on the easiest course. I need my network to work and this is costing me dear.

Problem using DECODE() function with a Query of Queries

I
posted
on my blog about an issue I was having trying to use the PL/SQL
DECODE() function with a Coldfusion Query of Queries. This function
works fine when you query a database for information. However, when
you query another query, it seems that CF doesn't recognize it. I
got errors stating that it found a left parenthesis where it
expected a FROM key word. Here is a simplified version of what I am
trying to do:
quote:

<cfscript>
qOriginal = queryNew("Name,Email,CountryCode",
"VarChar,VarChar,VarChar");
newRow = queryAddRow(qOriginal, 5);
querySetCell(qOriginal, "Name", "Joe", 1);
querySetCell(qOriginal, "Email", "[email protected]", 1);
querySetCell(qOriginal, "CountryCode", "AMER", 1);
querySetCell(qOriginal, "Name", "Sally", 2);
querySetCell(qOriginal, "Email", "[email protected]", 2);
querySetCell(qOriginal, "CountryCode", "AMER", 2);
querySetCell(qOriginal, "Name", "Bob", 3);
querySetCell(qOriginal, "Email", "[email protected]", 3);
querySetCell(qOriginal, "CountryCode", "ASIA", 3);
querySetCell(qOriginal, "Name", "Mary", 4);
querySetCell(qOriginal, "Email", "[email protected]", 4);
querySetCell(qOriginal, "CountryCode", "EURO", 4);
querySetCell(qOriginal, "Name", "John", 5);
querySetCell(qOriginal, "Email", "[email protected]", 5);
querySetCell(qOriginal, "CountryCode", "EURO", 5);
</cfscript>
<cfquery name="qCountries" dbtype="query">
SELECT DISTINCT(CountryCode) AS CountryCode,
DECODE(states, "AMER", "North America & Canada",
"EURO", "Europe & Africa", "ASIA", "Japan &
Asia","") CountryName
FROM qOriginal
ORDER BY CountryCode
</cfquery>
<cfdump var="#qCountries#">

So running this returned the following error:
Query Of Queries syntax error.
Encountered "(. Incorrect Select Statement, Expecting a
'FROM', but encountered '(' instead, A select statement should have
a 'FROM' construct.
Does anybody know why this doesn't work? Is it just not
supported? Please note that I have also tried to use the CASE()
function instead of DECODE() and that resulted in basically the
same error. For now I an looping over my distinct query with a
switch statement and manually loading a new query with the data how
I want it. But it would be a lot cleaner and less code to have the
DECODE() to work. Thx!

DECODE() is an Oracle function, not generic SQL. Q-of-Q is a
very limited subset of SQL and lacks many functions and clauses
available in standard SQL, especially what you may be used to using
in your particular RDBMS.
See
Query
of Queries user guide
Phil

Order split functionality with PP-PI

Hello Forum,
I am not sure whether we can use the order split functionality with process orders . I had implemented it earlier for a client with discrete MFG production type but not aware whether we can do so in process industry (couldn't find the provision to do so in process order operation overview screen function menu path).
Cheers
Kaushik

Hi Kaushik,
Yes your right.
Order split functionality is only applicable for Discrete manfg not for PI industry this is major difference between PI & DM.But you can achieve this at the time of process order confirmation.
Example :-In the Goods Movement Overview of Process Order confirmation FG material is done Auto GR. This FG material Quantity needs to be splitted. Push button "Split" is provided in the bottom of the Goods Movement Overview screen of Process Order Confirmaton.
Say FG quantity = 25 KG which is to be confirmed. Client wants to split the FG quantity into 1 KG wise, for this he needs to split into 25 times.
You can implement this by using below work order
Please use the WORKORDER_GOODSMVT for splitting the GR in Confirmation
This u can implement in PI.Also check Mr.Paulo reply that could be one possibility.
check & revert.
TnX

Creating Report using EPM Functions with Dynamic Filters

Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva Nagaraju

Siva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts.

How can I use JavaScript extention functions with Xalan for transforming XML with XSL

While transforming standart XML and XSL files to HTML with this servlet:
package mypackage1;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
import java.net.URL;
import javax.xml.transform.*;
import javax.xml.transform.stream.StreamSource;
import javax.xml.transform.stream.StreamResult;
import org.mozilla.javascript;
public class Servlet2 extends HttpServlet
private static final String CONTENT_TYPE = "text/html; charset=windows-1252";
public void init(ServletConfig config) throws ServletException
super.init(config);
public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException
try
response.setContentType(CONTENT_TYPE);
PrintWriter out = response.getWriter();
TransformerFactory tFactory = TransformerFactory.newInstance();
Source xmlSource = new StreamSource(new FileReader("c:/aaa.xml"));
Source xslSource = new StreamSource(new FileReader("c:/bbb.xsl"));
Transformer transformer = tFactory.newTransformer(xslSource);
transformer.transform (xmlSource, new StreamResult(out));
catch (Exception e)
e.printStackTrace();
everything is going ok,
but when try to use javascript function in XSL file, for example like in this:
<?xml version="1.0"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0"
xmlns:lxslt="http://xml.apache.org/xslt" xmlns:my-ext="ext1"
extension-element-prefixes="my-ext">
<lxslt:component prefix="my-ext"
functions="getdate">
<lxslt:script lang="javascript">
function getdate() {
var d = new Date();
return d.toUTCString();
</lxslt:script>
</lxslt:component>
<xsl:template match="/">
<p><xsl:copy-of select="my-ext:getdate()"/></p>
</xsl:template>
</xsl:stylesheet>
recieve error-message:
XSL-1000: (Fatal Error) Error while parsing XSL file (Extension function namespace should start with 'http://www.oracle.com/XSL/Transform/java/'.).
What kind of namespace I should specify?

Hello, Paul.
I'm sure you may not use JavaScript as a language for creating XSLT extention functions with Oracle XDK Parser. This is since parser might have JavaScript interpreter to work with JavaScript, but it has not.
If you need to build any XSLT extention functions you must build them as Java class' static methods.
After that, you define the usage of the class by mean of namespace declaration as:
xmlns:your-ns="http://www.oracle.com/XSL/Transform/java/yourpackage.Yourclass"
(Prefix "http://www.oracle.com/XSL/Transform/java/" may differs if you use non-Oracle XML parser)
and use class' static method in XSLT:
<xsl:value-of select="your-ns.staticMethodName(paramsIfAny)"/>
In your case you may wish to use standard Date class:
xmlns:date="http://www.oracle.com/XSL/Transform/java/java.util.Date"
<xsl:value-of select="date:toString(date:new)"/>

How to use a mysql built-in function with dataprovider

hi.
I want to use a mysql built-in function, for example, MD5() on a column when updating a table with dataprovider.
Something like this doesn't work:
MyDataProviderOne.setValue("tablename.field_name", "MD5('some text')");
How should it be done?
thanks.
Mike.

hi.
thanks. this helped, but I'd like to use also different functions, that's why, I'd rather do it by MySQL built-in functions with dataprovider... Is there any way to do that?
best regards.
Mike.

Apple tv second generation will no longer function with netflix

My apple tv won't function with my netflix anymore and i cannot figure out why every film i select it states this error message
A network error has occured and this title cannot be played or found at this time.
i know my internet is working just fine and yes i updated to the latest apple tv version but nothing netflix won't work but everything else does what gives could this be because netflix updated to a new version and apple tv hasn't updated to the new version of netflix yet???

Yes i did reboot same error message and the latest version of the netflix streaming app is 2.37 on all ios devices including apple tv but they went to netflix version 2.38 on ps3 and xbox 360 so now it doesnt work on netflix at all i found this out after talking to netflix customer support.

After their recent upgrade Facebook no longer works for Firefox version 2.0.0.20, what is the most recent version of Firefox that will function with a Mac G3 running OS 10.3.9?

Facebook (FB) recently restructured their website. After logging on to my FB homepage, some of the graphics are garbled and I am no longer able to post status updates, comment on friend's status updates or pictures, or post pictures using Firefox version 2.0.0.20. I would like to know if there is a newer version of Firefox that will function with a Mac G3 Blue and White desktop running OS 10.3.9 which will be compatible with the new FB? I would upgrade my computer, but have 22+ years of business and tax records that will not function with the newer Mac OS.

Other browsers that you can look at:
* Camino: http://caminobrowser.org/download/releases/
* [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/dl.php
* SeaMonkey: http://www.seamonkey-project.org/releases/seamonkey1.1.19

Lost BT Modem Function with N95

Similar Messages

Maybe you are looking for