Lost calendars in iCal since latest update
Hi
When i opened ical yesterday it appears that all the calendar titles from the left hand side pane have dissapeared. It is very odd because all the data are still there.
When I start iCal there is nothing on the monthly view but when i switch to the weekly view and back again the calendar events appear on the monthly view but still no sign of the calendar titles on the left.
I noticed that someone else had the same problem and i tried deleting the com.apple.iCal.plist file from the preferences folder and start iCal again with no success. The problems above are still the same.
Can anybody please suggest a solution? I have already checkd permissions, run Onyx and a few other similar utilities with no success.
Any help will be appreciated.
Thanks guys.
I also at first attributed this problem to the latest security update I did. But I think it only manifested then due to quitting iCal. I had also just recently started using the Tasks app on my Treo and syncing the entries to iCal. I now believe this is indeed related to repeating tasks. iCal doesn't support them, but Palm does. So if you are syncing to a Palm device with Missing Sync or something other than the limited iSync, you'll probably have problems. Apple's handling of task or to do's is pretty pathetic anyway so I removed all my tasks from iCal and manage them solely on my Treo. No more problems
It's a shame that Apple's iCal team can't even provide as much functionality as the Palm OS, which for all intents and purposes hasn't been updated in years. :-/
Similar Messages
-
Have lost Hotmail since latest update
Since latest update cannot open Hotmail ,screen is blank apart from send ,reply icons etc along top of screen.
mail is coming in number of mails goes up on mail icon but can't access .There are several possible causes for this issue. Take each of the following steps until it's resolved.
1. Follow the instructions in this support article.
2. Reset the System Management Controller.
3. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
4. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced.
5. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
6. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
7. If none of the above applies, or if you have another reason to think your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
8. Make a "Genius" appointment at an Apple Store to have the machine tested. -
since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.
I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy. -
My Windows XP and Windows 7 iTunes no longer 'see' my AppleTV since latest update (25/02/2013). Also, my AppleTV tells me I must turn on Home Sharing which is already turned on. I have the little arrow that normally selects my AppleTV in iTunes but AppleTV is no longer listed (only My Computer). Is there an issue with the latest update. This is probably my fault by telling everyone how good AppleTV is and that it just works! Doesn't work any more :-( I have tried all the usual restarting of AppleTV and PCs. I'm having to revert back to the Samsung Blu-ray player's PC sharing :-(
Restarted router(s) and it works again.
-
Having trouble with my apple tv since latest update, it has died and can't turn on as it doesn't recognise anything, what can I do?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
1. Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
2. Connect the micro USB cable to the Apple TV and to your computer.
3. Reconnect the power cable (only for Apple TV 3)
4. Open iTunes.
5. Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
final cut pro x - lion - mbp 2011 2.0 15 - not responding at all since latest update. Can't open or edit projects, loading window that pops us when you click the app (as it loads) does not go away, says loading compressor support, paralyzed. Have tried reinstalling, default settings etc
Appreciate suggestion, working on deadline. Thanks.Here is the start of the crash report:
Process: Final Cut Pro [20568]
Path: /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier: com.apple.FinalCut
Version: 10.0.1 (185673)
Build Info: ProEditor-185670300~1
App Item ID: 424389933
App External ID: 4138831
Code Type: X86-64 (Native)
Parent Process: launchd [102]
Date/Time: 2011-11-11 20:41:32.201 -0800
OS Version: Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report: 192058 sec
Crashes Since Last Report: 14
Per-App Interval Since Last Report: 157161 sec
Per-App Crashes Since Last Report: 14
Anonymous UUID: DD542B2F-58A0-482E-AAFA-ECADEC76F562
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000280000003
VM Regions Near 0x280000003:
CG shared images 00000001cbf62000-00000001cc182000 [ 2176K] r--/r-- SM=SHM
-->
STACK GUARD 00007fff5bc00000-00007fff5f400000 [ 56.0M] ---/rwx SM=NUL stack guard for thread 0
Application Specific Information:
objc[20568]: garbage collection is OFF -
HT6058 my ipad screen will not rotate since latest update
my ipad scrren will not rotate since latest update, i have done everything i can think of including wha tapple told me
What have you tried, and what did Apple tell you ?
Is there a lock symbol at the top of the screen next to the battery indicator ? If there is, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085
If there isn't a lock symbol then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Cannot send virginmedia webmail since latest update
Can send virginmedia webmail with other browsers. Virgin have checked and all connections are fine - they can use my webmail but since latest update I cannot
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates -
HT6065 Since latest update i have a login loop, can someone help?
Since latest update i have a login loop, can someone help?
Hold down the Power button for 5-10 seconds until the computer shuts down. Restart. Report what state the computer is in at that time.
-
Airprinting from iPad since latest update 8.1.
Why can we no longer Airprint from our iPads since latest update 8.1.
Also finding screen freezes for a short time frequently and a Google search often closes.
Neither of us were experiencing any problems before update.
Please helpHi the best way to solve your problems is to Restore To factory settings this will get rid of any bugs Backup to iCloud on iPad Go to settings Reset Factory Restore You will get all your data back after this You just need to use the same Apple ID Also sometimes cloud drive can be a problem of so disable this in settings Later. Cheers Brian
-
I use OverDrive to get audiobooks from my library to listen on my ipod. Does not work since latest update of ipod. Converts the WMA and acts like it is putting it on the ipod but then it isn't there.
Downgrading the iOS is not supported by Apple.Have yo tried:
- Backing up and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
- Go to the OverDrive support site -
Syncing with iPad mini does no longer work since latest update of iTunes
Syncing with iPad mini does no longer work since latest update of iTunes and iPad mini
Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy -
Can't swipe between months with gestures in iCal since I updated to Maverick.
I used to be able to use two fingers in ical to move forward to the next month. Or vice versa swipe back to get to the previous month. Since I updated this gesture will not work. What am I missing? Thank you for any support. Not a huge deal just annoying me.
Do you see a left-facing and right-facing arrow in the upper left corner of your Calendar, with "Today" in the middle?
Clicking the left-facing arrow goes back a month, while the right-facing arrow advances a month. -
Since latest software update on my iPad 3, Safari is unresponsive when trying to zoom or open other images, when online shopping.
Tap Settings > Safari
Tap to clear History, Cookies, and Data.
Then reset the iPad.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
Previous tabs lost on next startup, since last update
Ever since the update to Firefox 33.1 (and/or since the Windows 7 update in the week of Nov.11.2014), Firefox will not retain the tabs from my previous session. I have (and have always had) my Options set to load pages from the previous session, but even when I set it to something else and then back to that again, it will only load my homepage tabs when I start up Firefox again. This is extremely annoying, since I like to leave tabs open to go back and read articles or whatever, so I've lost things now that I wanted to refer back to.
Is anyone else having this problem? I don't recall having this exact problem previous to the latest update(s) of Firefox and/or Windows 7.Thanks for your reply, cor-el. I'm not entirely following your instructions though. When I open the directory of that folder, I find sessionstore.bak, dated Oct.30 (which might have been when the problems started; my life has been very overloaded recently so I'm not sure when it started), but no sessionstore.js. I'm not sure what the App Tabs or Tab Groups would be either.
Because my life is currently very overloaded (death of a family member), I don't have the time or energy to deal with a complicated learning curve right now - I just want to get Firefox working the way it was before this bug started. Is this an issue that others are reporting, that will perhaps be fixed in the next update?
Maybe you are looking for
-
I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?
-
Mac mini displays the wrong resolution
Hi everybody. My Mac mini recently began starting up in the wrong resolution (1024x768, instead of the usual 1280x1024.) From my experience with older, 680x0 Macs, I reset the PRAM. This fixed the problem, but I find that I have to do it every time I
-
Problem in SQL query in MDB database
Hello all, I am using mdb database and want to read specific time stamp record based on time stamp. I am using simple sql query but I am getting one error. Please let me know where I am making mistake(s). One error is operator mis
-
i was hoping someone can help me. im new to ipods and itunes. and i downloaded itunes and quicktime and i downloaded a music video in itunes and when i play it in itunes i get a green box and can hear what is going on but not see anything. Any ideas?
-
Change of USER status for SDHF transaction type though CRMD_ORDER
Hi, We have a requirement to change the user status of transaction of type "SDHF" creted using CRMD_ORDER. We are using FM " CRM_STATUS_CHANGE_EXTERN" for the above requirement, but stuck with the following error "Status REL is not allowed". On analy