Lost Camera

I can't see the Yellow Camera in my project. I've seen a couple of other threads about this, and been through all the steps. (Selected camera, 3d view, 3d overlays, in perspective view etc). I then deleted the com.apple.motion.plist file and restarted Motion.
The strange thing is that if I open a a motion template I can see the camera just fine. But in my own project I can't - I do get the 3d toggle where the camera should be, but not the yellow outline and frame.
(Using Motion 3 on a MacPro with Leopard if it's significant)

well i going to assume here...with whater that is written.
you might have misplaced or moved somewhere since the camera icon just like the settings icon are default and cant be deleted.
to get it back go to   SETTING>GENERAL>RESET>RESET HOME SCREEN LAYOUT.
OR
SETTING>GENERAL>RESTICTIONS>CAMERA. (SHOULD BE DISABLED)
try this and see if works.
jagsd

Similar Messages

  • Lost camera raw support for canon 1ds markI in mountain lion

    I seem to have lost system support for camera raw files for the original Canon 1ds (what you might call the markI). There's been two recent raw support updates, and I'm not sure if it occured with the first for those two updates or with update to Mountain Lion itself (which I recently clean-installed). I noticed it after the first raw support update (Digital Camera RAW Compatibility Update 4.01) but it could have happend with Mountain Lion install and I just didn't notice. In any case, I definitely don't have support for the camera raw files, finder shows only the generic TIFF icon thumnail (the raw files from the markI 1ds were of the extension .TIF, before canon moved on to .cr2 format..). Preview and Aperture can preview the file but without any custom white balance or other info stored with the raw file from camera.
    Anybody else experience this or know fix?
    Thanks!
    For anyone wanting and willing to test on their machine, I'll post a link to a test raw file.... hmm, apparently this support forum does not allow for the linclusion of a link to an image file, but I'll see if it allows for a link to a zipped folder with image inside... I suppose I wouldn't download a .zip file myself but for anyone braver than I:
    http://laglj.com/2012hirez/1dsTestFile.zip
    Thanks,
    Lane
    laglj.com

    Lane,
    That latest raw update also shows supported devices. The EOS-1Ds is still shown as supported by Mountain Lion in the knowledge base article that accompanies it. Bump!
    I wonder if using Disk Utility and verify/fix permissions may restore your RAW capability.
    Don't have Aperture or Lightroom.
    I installed the recent raw updates into 10.8.2. The DB5W2360.TIF file has a generic Preview icon. Graphic Converter 8.3.1 opens .cr2 files, and it opened this TIF file nicely as well. GC is willing to modify white balance with a condition that it cannot be done in place, and must be exported to a different format.
    Not much help, I know.

  • HT1414 Lost camera and photo app.

    I lost my camera and photo apps from my home screen and can't figure out how to restore them.  I can access the camera from the lock screen.

    Settings > General > Reset > Reset Home Screen layout.

  • Lost Camera Raw Info Displayed in MetaData Panel.

    I have lost all the CR preferences that I checked of in the Metadata Preferences in Bridge Preferences.
    The "Camera Raw" arrow shows it is open and it displays the CR filename but nothing else even though the boxes are checked.
    Any hints on what happened? Worked fine yesterday.
    Dan

    No one ever encountered this phenomina eh??
    Also "Preview" panel tab missing.

  • While tethered, LR3 lost camera...twice!

    While photographing a portrait in the tethered mode last night, LR3 lost my camera,  twice. I use LR3 on a MacBook Pro and a Nikon D200. I had no similar problem in LR2.  LR3 found my D200 immediately after selecting Tethered Capture and switching the camera ON. The first time it happened, I quit LR3, restarted the program, and it found my Nikon. Ten minutes later, it happened a second time and wouldn't find the camera after a restart. I didn't have time for a reboot so I gave up and switched to Sofortbild and finished the session with no further issues.
    I suspect the problem was in some way tied to my flashes but I can't explain how. I was shooting in commander mode using my SB-800, SB-600, and on-camera flash. My suspicion stems from when I fired the camera, it seemed like the flashes "glitched" or didn't fire properly. I lost that exposure and any subsequent exposure created while tethered and running LR3. Also, there was nothing on the flash card. After launching Sofortbild and establishing the file criteria, there were no further "glitches".
    Has anyone experienced this behavior while ththered to LR3? Has anyone solved this behavior?

    Welcome to the Apple Discussions.
    Unless you have a back up, then you have articulated the choice your face perfectly.
    Regards
    TD

  • Blackberry 8900 Malfunction - lost camera icon, lost Twitter, lost Facebook :-(

    I don't know much about Blackberries except that I love mine! I have had mine for 15 months without incident - recently I downloaded Twitter and Facebook from Blackberry App World and everything was hunky dory.
    Today I went to answer a call and a message flashed up (all I caught of it was app error) then went to a white screen. After foooorever, I did a battery pull and when it rebooted, all I got was the 02 screen.
    I turned off and turned back on my device and it all came back to life except:
    1. The error "uncaught exception java.lang.NullPointerException appeares and
    2. I lost my email icons, Facebook, Twitter and Camera icon
    Since then I checked for updates (apparently I am completely updated) and restored my Blackberry and as a result, I have got my email back but not the camera icon (although I can access it via the Media icon) and I cannot get Blackberry App World, Facebook or Twitter (despite the Application Loader saying they are on my Blackberry).
    Can anyone please help me get the App World, Facebook and Twitter back without crashing my Blackberry again?
    Device info
    Your carrier: 02
    Model info and OS version (Go to Settings, then Options, then about): v4.6.1.133 (Platform 4.2.0.85)
    Apps and free space
    File free before and after a battery remove/replace. (Go to Settings, then Options, then status): Battery 100%
    File Free: 120124042 Bytes
    Did a battery pull fix your issue?  No

    Swipe down anywhere on the home screen to reveal spotlight search, then type in the name of the app to search for it
    You can also go to settings/general/reset/reset home screen layout

  • How to find lost camera icon

    How to find camera icon lost in trying to move down a row

    Check in All Folders and on All Pages/Screens...
    Check in Restrictions...
    Settings > General > Restrictions
    Understanding Restrictions  >  http://support.apple.com/kb/HT4213
    If no joy...
    Settings > General > Reset > Reset Home Screen

  • Lost camera and safari app on 4S

    When I had the 3G I lost both apps.  When I restored it so I could return it for the 4S, it came back.  Now that I did have done the back up on the 4S, they are gone again.  Don't want to restore and back up until problem fixed.  Has this happened to anyone?

    Did you add a corporate Exchange account to the phone? Both of these can be hidden using policies pushed from an Exchange server. If they haven't been moved to another page or folder, or hidden with restrictions, try deleting your Exchange account and see if they come back.
    If they do, you have 3 choices.
    1) Live with the restriction in order to be able to access your corporate e-mail.
    2) Don't use your phone to get to your corporate e-mail.
    3) Buy your IT guy a nice bottle of Single Malt Scotch Whisky and ask nicely if they'll consider changing the policy.

  • Lost camera pictures

    I Lost 1000+ pictures with recent iOS update. How can I get my pictures back. I have no other backups

    If the pictures weren't backed up, from where did you think you could get the pictures back?
    Have you failed to use the device properly, and import all photos taken with the phone to your computer as you would with any other digital camera?

  • HT201272 ipod has lost camera and cannot load apps previously installed - please help

    my sons ipod has had to be re installed and has now lost the camera and all his apps, but has music ! please help

    The camera cannot be "lost" as it is a part of iOS.  It can be disabled via Restrictions in Settings > General > Restrictions.
    As for apps, ensure they are selected to sync in iTunes.

  • Lost camera raw information

    I have been searching for this problem but have not found somthing similar to my experience.
    I recently reinstalled my computer due to some hardware problem and had to reinstall CS5 to, but when I opened my Raw files, which I sometimes edit Camera raw with such as exposure, sharpness etc., had lost all the adjustments that had earlier been made.
    The preference is set to read to camera raw database and not .xmp but still all my adjustments had been lost.

    Personally I think littering up the disk with extra .xmp files has downsides too, which for me at least outweigh problems that might be encountered with using the separate database.  I have never had a problem with my separate Photsohop Camera Raw database.
    I'm very glad to have the option to save the settings in a common database.  I sincerely hope Adobe does not eliminate the option in a future release.
    From the sound of the above posts, folks seem to be treating the location/file where the data is stored as some kind of mystery...  Why?  On Windows the file is named Database (with no filename extension) and is found in these folders (depending on what OS you're running):
    Vista and Windows 7:
    %USERPROFILE%\AppData\Roaming\Adobe\CameraRaw
    (paste the above path into the address bar of Windows Explorer)
    For example for me this works out to be:
    C:\Users\NoelC\AppData\Roaming\Adobe\CameraRaw\Database
    XP:
    %USERPROFILE%\Application Data\Adobe\CameraRaw
    For example:
    C:\Documents and Settings\NoelC\Application Data\Adobe\CameraRaw\Database
    Database is just a file, and can be backed up, restored, copied from one computer to another, etc. just like any other file.  Windows 7 Backup, I believe, backs up all the files under the user profile in its default backup configuration.
    -Noel

  • Lost camera icon on iphone4s

    I kept the camera icon on my iphone 4s in a folder marked photography. I decided to take it out of the folder to put on to the screen, when I did this the icon disapperared ??? i now can't find or recover it ... any suggestions please ?

    Can you reach the icon from lock screen?
    If you can't, go to Settings>General>Restrictions>Disable Restrictions OR turn on Camera.

  • Installed LR2.6 and lost Camera Calibrations and....

    Installed LR2.6 a couple of days ago and now everytime I start it, it wants me to enter my seriel number, but also I do not have any of the Nikon Camera Calibrations availailable, Only the ACR 4.6 Calibration.  What gives?  Do I need to install ACR 5.6 also?  I do have PS CS4 so I guess I need to install it anyways. But what about having to re-enter my series.  Wouldn't be a problem except that I'm away from home for a few days and don't have access to the LR boxes.  This for Windows verson.
    Thanks
    Doug

    That didn't work, but here's what was happening, I uninstalled LR2.6 to roll back to LR2.5.  But when I was installing 2.5 I was getting an error message that a Fold Called - "ProgramData/Adobe/CameraRaw" could not be created.  After doing so troubleshooting, I firgured that the folder was locked and LR did not have the right to modify the folder.  SO I went in and changed permissions and unlocked the folder.  Got LR 2.5 installed, but now each time I launch LR, it wants my serials.  I enter them and it doesn't take the number and have to re-enter each time I launch it.  Any suggestions?  Using Windows 7 Home Edition.
    Thanks
    Doug

  • Lost camera pictures due to latest update!

    Moved for greater exposure

    incrediblynot wrote:
    I just noticed yesterday that all my pictures (over 500) had been deleted.  I did not store them on my SD card.  They were stored on my phone storage, which had a lot of free space.  I just got off the phone with a Verizon technical rep.  He asked if I just updated the phone.  I said I yes, because I received an update notice.  He said this is probably why my pictures were erased.  He said it is a freak incident and unfortunately there is no way of getting my pictures back and that I should store them on my SD card for back-up.  Well this info. is too late.  I can't believe my pictures are all gone because I updated my phone per their notice.  Totally SUCKS!  He said for further complaints I should contact HTC.  My phone is just over a year old.  It's been having issues randomly the past few months.  But this is the worst issue, because my pictures are gone for good.  I use to like this phone, but not anymore!
    Your pictures you take are on the Sd Card storage Not the phone I thought i had lost some of my Photos as well but got them back an here's How i got them back. Go to Menu > Settings > Sd & Phone Storage Schroll down to Unmount SD card AN Tap it. It will Unmount the Card As Soon as you Do This Remount the Card Only   " And DO NOT >> ERASE THE CARD "  Wonce you Touch Remount... Hit the Home button an then go to your Picture Gallery an your Pic's should return.
    Read these Post as Well... An as i said Hopefully you get your pictures Back. B33
    http://community.vzw.com/t5/DROID-Incredible-by-HTC/Can-t-view-Picture-Video-Gallery-After-4-08-Update/m-p/729209#M19381

  • Lost camera pictures and contacts

    I recently bought the 4s while traveling and used the awesome camera to take all my pictures.  When coming home, I plugged my phone into my laptop for the very first time to sync.  Afterwards though, all of my new pictures were off my phone and all of my old pictures from my old phone were back on.  My new pictures did not seem to import.  (I did not have icloud set up yet since I was traveling )
    All of my contacts were wiped as well which I really don't understand because my old phone had all of the same contacts that my new phone did (had them transferred over before leaving the store). 
    Were my new pictures actually deleted?  Could they be somewhere in the hard drive?  I haven't done anything since this happened (haven't even unplugged the phone).  What about this 'revert button'? 
    The contacts, I can figure out- its the pictures I'm most concerned about.

    To do another restore...
    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your device.  Then you will go through the setup screens again as you did when your device was new, and when given the option, select Restore from iCloud Backup.
    This link gives another overview of backup and restore:
    http://support.apple.com/kb/HT4859?viewlocale=en_US&locale=en_US

Maybe you are looking for

  • Java en Vista (compatibility)

    Are there any recent articles/websites about compatibility between Java and Vista, Especially older versions of the JRE, like 1.4.x and 1.5.x ? I found http://weblogs.java.net/blog/chet/archive/2006/10/java_on_vista_y.html Or is anyone here working o

  • Crystal Report - problem with passing parameters from J2EE app

    i'm trying to pass a few parameters from my java application to a crystal report using the code below: ParameterField pfield1 = new ParameterField(); ParameterField pfield2 = new ParameterField(); Values vals1 = new Values(); Values vals2 = new Value

  • Hiding Specific Columns in discoverer

    Hi all ! Is it possible to hide specific columns for some specific users ?. I have 10 columns in the table out of which 2 columns should not be visible to specific users and other 2 columns should not be visible to some specific users in the report g

  • Ref doc no in KE5Z

    In KE5Z report on executing we are getting a field called Ref document number.How could i find what this ref doc is.I cant drill down.Neither could i goto original doc.Please help.

  • How to include IE on form Canvas (same windows)

    I Use OLE Container Object to Show IE on the forms6i Canvas (same windows) It's work like separate frame on the same Canvas ..;but when I migration to forms 9i , It's not working .Can I have any way to do this on the form9i