Lost catalyst control center and switchable grphics

Hi i accedintly deleted all of ati folders in my pc and reinstalled the new amd for the driver and lost switchable grphics options in my pc now i dont know what should i do to restore the switchable graphics setting in my laptop or the old catalyst control centerplease help me

Hi, Download and run the AMD installation package on the following link - this provides both the drivers for your switchable graphics, including the customised Catalyst Control Centre. http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55025.exe When the installation has completed, restart the notebook. Regards, DP-K

Similar Messages

HP Pavilion dv6-6130eo, Radeon HD 6770M, switchable graphics, update Catalyst Control Center

Computer: HP Pavilion dv6-6130eo
I have installed windows 7 64 bit
Graphics cards: Switchable Intel and Radeon HD 6770M
So far, I have been using the graphics driver provided by HP including Catalyst Control Center, and it has been working fine.
I recently bought a new game: Wolfenstein:New order. I fulfill minimum requirements.
When trying to run the game, I am informed, that my Catalyst Control Center must be 14.4 or newer: Fatal error, and game cannot run.
How can I update my Catalyst Control Center to 14.4 or newer? Both graphics cards (switchable) should be working.
Thanks a lot in advance - This issue is really getting on my nerves!

Hi @Guggermand
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebooks works fine except when you try to play your new Wolfenstein New Order game, at which time it informs you that your Catalyst Control Center is out of date and must be 14.4 or higher. You stated installed Windows 7 64 bit.
Have you done all your Windows updates?
Have you ran The HP Support Assistant to aid with updating drivers and resolving issues.
Here is a link to the latest recommended HP driver AMD High-Definition Graphics Driver sp55092.exe for you system.
If that does not update your current version of the Catalyst Control Center, you will need to check the AMD website.
Downloading or Updating Software and Drivers for HP Computers
Here is a link to AMD Graphics Drivers and Software for your convenience.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Boot Camp - Windows 7 (64-bit) - Catalyst Control Center

Hi,
This topic is all about running Catalyst Control Center on your Mac in Boot Camp.
Setup:
Mac Pro 2.66 (early 2009)
ATI Radeon HD 5870
Boot Camp 3.2
Windows 7 (64-bit) SP1
Case:
First I uninstalled all graphic drivers that came with Mac OS disc. After that I booted up in safe mode and removed all left-overs with Drive Sweeper. After verifying that everything was gone I booted up in standard mode and installed latest version of Catalyst Software Suite (v.11.2).
Notice! To get through with the installation of CSS I had to uncheck features like drag and drop decoding. If I did not uncheck those features the installation process would fail...no clue why. After a "successful" installation it still does not work. When I right-click the CCC shortcut or try to start the application from its folder nothing happens.
*Solution (if any):*
Any ideas?
<Edited by Host>

I had trouble accessing catalyst control center (for my AMD Radeon HD 6700M Series display adapter) on my Windows partition (64-bit). I tired installing the drivers from the mac os x cd and from AMD's web site. While I could successfully install the driver, I couldn't get the control center up and running. The interesting solution to this problem was downloading the AMD Catalyst™ 12.2 Preview Driver. After installation, i was able to access the catalyst control center and solve a problem that I was having (undersize on my monitor when using HDMI). I hope that this helps solve the problem to others who are experiencing it (I thought I'd post as this page came up in my solution searching).

7850 CrossFireX - Catalyst Control Center - Disable CrossFireX

Hello, I have MSI 7850 CrossFireX. I was playing Skyrim and notice micro-stutter so I went into Catalyst Control Center and disabled CrossFireX.
The problem is that Skyrim will not load. It always crashes when I start the game. I re-enabled CrossFireX and it will load fine.
I was wondering whether this is a known issue. Maybe I have to physically remove the connector to get it to work (I haven't tried that. I just wanted to see how it would do with one card). I don't know if this is a problem with Catalyst Control Center, the driver, Skyrim, Steam or what.
Any information would be helpful. Thanks.
Edit for more information:
i5 2500k, Win 7 64-bit
cooler master hyper 212 plus
asrock z68 extreme3 gen3
crucial m4 64GB, western digital black 1TB
consair vengeance 8gb (2 x 4gb)
msi r7850 twin frozr (crossfirex)
(catalyst verison 12.3)
consair hx750
The reason i'm asking this question is basically I want to know if disabling crossfirex in Catalyst is suppose to work? I'm sure someone has done it before.

What's your PC specifications? Have a read >>Posting Guide<<

I Can't Switch between 'power-saving GPU' and 'High-Performance GPU' in Catalyst Control Center

Hi,
Whatever if my computer was only on the battery or was only plugged in to the main power supply. In Catalyst Control Center, I noticed that 'High-Performance GPU' was always selected', although the 'automatically select power-saving GPU when on battery' was enabled. Also, When I tried to switch into the 'power-saving GPU', there was no response at all. However, when my laptop was only on the battery, I noticed the the try of switching into 'Power-Saving GPU' results in shutting down my computer suddenly.
Thus, I had to open the Device Manager, then I disabled 'Radeon HD'. After that, 'power-Saving GPU' was selected(Screen shot below), regardless of whether my laptop was on only the battery or was only plugged in to the main power supply. To switch it into 'High-performance GPU' again, I only must enable 'Radeon HD' in the Device Manager since clicking on 'High-performance GPU' in the Catalyst Control Center didn't respond.
As conclusion, 'High-performance GPU is always selected, regardless of whether my computer was only the Battery, or was only plugged in to the main power supply. To let 'power-saving GPU' is selected, then 'Radeon HD' must be disabled in the Device Manager.

Hi @cooperator ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I see from your post that you have switchable graphics and are experiencing a difficulty with them.
Have you checked your power plan. Here is a link to Using the HP Power Plan Utility.
Here are two documents on switchable graphics that should also assist you.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Dual AMD GPUs
If you are still having an issue, I suggest contacting HP support for further assistance.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

ATI Catalyst Install Manager and catalyst Control Center Help

I just run the Windows 7 Upgrade
advisor report and it said that I should uninstall the ATI Catalyst Install Manager and Catalyst Control Center then reinstall after upgrade..
Could someone direct me where I might t find these programs for Windows 7

You must not do this. Just continue upgrade installation.
On my Satellite I got the same message but I have simply continued with upgrade.
At the end everything went fine.

T500 ATI Catalyst Control Center cannot be started

I have some troubles in opening the ATI Catalyst Control Center.There was a window poped out saying that ATI Catalyst Control Center cannot be started because the currently active GPU is not supported. I have already reinstall this drive and the graphic drive. But the problem is not solved. I am wondering what could I do now?

Right click on the battery in the task bar and make sure your Switchable graphics are set to Performance, if it is in energy savings the ATI control panel will not function, you need to use the Intel graphics setup instead.
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

T400, cannot start Catalyst Control Center - error "active GPU not supported"

on a t400 machine running vista business 64 bit.
last week all was hunky dory. this week, when i try to open my ati catalyst control center (CCC), i receive the following error:
"ATI catalyst control center cannot be started because the currently active gpu is not supported"
i've read some posts about this problem stemming from not using the ATI graphics card and rather being on the integrated graphics card. the posts indicated i could reenable CCC simply by clicking on the battery icon in the system tray and selecting "high performance mode" to force the machine to use the discrete graphics card. after i do this, and then try to start CCC, i receive the same error as above. also, at this point after the switch to high peformance mode, my device manager lists "mobile intel(r) 4 series express chipset family" as my display adapter still. if i left or right click on the battery icon in the tray, i do not see any options for switching cards explicitly.
the video driver for the mobile intel 4 adapter is listed as being from ATI at version 8.520.4.4000.
i am not sure of my driver version for the ATI card. nor do i know where to look for it.
to my knowledge, nothing aside from a number of "critical" windows updates have changed on my system between the time CCC was working last week and now.
any suggestions as to how to fix this? and what caused it to stop working?
thanks in advance for any help.
Solved!
Go to Solution.

i finally figured it out. and no new drivers or reinstalls were necessary. in the end, all i needed to do was turn on the lenovo version of the power manager (which appears in my taskbar as a horizontal green battery with the number of minutes of use remaining). from there i can left click and get to the menu that has the switchable graphics option where i can chose energy saving or high performance. if from there i select high performance, i can then open CCC.
the important thing to note from this is in order to get to this menu you have to be using LENOVO's thinkVantage power management program (which sticks the green battery icon on your task bar), NOT windows built in power manager, which appears as a vertical grey/blue/? battery in the system tray (at least on mine). once you have that on, you can explicitly switch the graphics cards.
the odd thing is, i'd been accessing CCC without explicitly switching cards with no problem up to last week. so somehow the default setting must of gone from high performance to energy saving, thus putting me on the integrated graphics card unless i switched it manually. weird.
slip, thanks for you help. i appreciate it. and that is an interesting note about freeing up more memory by disabling the switchable graphics. i will probably give this a shot and see how i like. more available memory never hurts!
thanks again to everybody that helped out.

Catalyst Control Center: Host Application has stopped working (Error)

Hi, I have anHP Envy 14-1110nr Notebook PC, with Windows 7 64-bit, and Catalyst Control Center (To configure switchable graphics) doesn't work. I believe to be stuck on my low performance GPU,and can't switch. I cannot load anything to do with my switchable graphics, and am at a loss for what to do (I'm a very inexperienced computer user). I have browsed other forums related to this but am scared that I'll destroy my computer by downloading the wrong thing. This all started after I got a virus that caused me to need to reset my computer from an earlier stage, please help.

Hi,
Try using Recovery Manager to reinstall your AMD Graphics Driver - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 8.1-AMD Catalyst Control Center

Hello!
First of all I would like to start of by saying thank you Hp for an amazing product, I bought my Hp Envy m6 laptop in May and I have loved it ever since. I bought it as a gaming machine, and it did not disappoint me...until I decided to update to Windows 8.1.
I downloaded it from the app store last week to see what new features they added (was rather disappointed with how long it took especially for the lack of great features they added, however that is not your fault), after a day when I bought a new game from Steam (Arma Two) and I went to the Catalyst control center to set the performace to high I realized it had stopped working the message I got was:
"Catalyst Control Center cannot be started.
There are currently no settings that can be configured using Catalyst Control Center"
This means a lot go my games are running rather bad at the moment as they are using a mixture of my intergrated Intel 4000 "graphics card" and my AMD Radaen HD 2GB Graphics card. Instead of just my AMD graphics card (the good one).
I tried looking for solutions to this problem e.g. A new download for Catalyst Control Center or an easy way to downgrade to windows 8 from windows 8.1 however I have been unsuccessful. The only method that seems possibly is to downgrade however that would involve uninstalling all my programs (Over 50 games from steam) and all my other programs.
So the reason for this message is that I am looking for a solution to this problem, either an easy way to downgrade to windows 8 OR a way to get my Catalyst Control Center to work again so I can change what graphics card is used when.
Thank you
-Conor
P.s. I love Hp's products and I have told all my friends to get them. This is window 8's fault not yours.

Possible solution:
Hi Guys,
I just contacted HP support regarding this problem. They asked me to install the following file:
ccc2_install.exe
It was already present in my system in the following path:
"C:\Program Files\AMD\CCC2\Install"
This solved my problem. CCC is working fine now
Also, while installing, your desktop might go black and only active windows will seem to work. But, thats fine, just restart your system.
Hope this helps
Cheers...
Thanks and regards,
Saptarishi

How to activate control center and notification center in ios 8.1.3

I have iPhone 5s whit iOS 8.1.3, sometimes I can't access control center and notification center by sliding up or down on screen till I turn my device off and then turn it on. What is the problem?
Is it a bug in this version of iOS??? :-O

Go to Settings > General > Restrictions, make sure "Deleting Apps" did not get turned off.
If it is not a restrictions problem...
Try resetting:
Hold both the home and power buttons at the same time until the Apple boot logo appears. No data will be lost.

ATI Radeon HD 4870 - Bootcamp & Catalyst Control Center

Hey all,
I installed Bootcamp (Vista 64-bit) 5 min ago and noticed that Catalyst Control Center was not there. When installing Bootcamp on my MacBook Pro I got the Nvidia panel, why is not the CCC available on the Mac Pro?

I have posted a message "White screen of death and computer halts with ATI 4870 in Boot Camp"
I bought the 4870 and ANYTHING I do causes the system to halt and go to a white screen before even attempts to go into windows.
I have called Mac AND gone to a shop. I took the NVIDIA out of my MAc Pro and put in the 4870 and works GREAT in Mac but as soon as hold down the Option key to get the option to select Mac or Windows it halts system when push Windows before even attempts to load Windows.
I went so far as to take ALL hard disks out of system but a new one and put a Vists dvd in drive and try to install it.... Also tried Windows 7 and xp. NONE work... as soon as click the dvd the system halts. So this supposed upgrade just doesn't work.
I haven't found anyone with the same problem which is odd...
Any advice I would love it. Otherwise I need to return it.
The MAc shop said it wasn't their problem. Mac just guarantees works on MAc OS and maybe someday will support bootcamp. Really bad answer.

ATI Catalyst Control Center

OK... so ive installed the video driver but when i look at add remove programs it does not show the Catalyst Control center is installed .. nor does it show up when i right click on the desktop. i have .net Framework 3.5 installed. what is the problem and/or where to i download the Control center... my unit is T60 2623 D6U running windows XP pro.
UPDATE: i will keep this up incase someone has this problem... the reason it wasnt working was because i never executed the Setup.exe file.. you must load the ATI software for it to work.. yes i am a noob sometimes....
Thanks to all who didn't flame this post.
Message Edited by Gdenison on 06-04-2008 03:01 PM

Funny enough i had the exact same problem on an A50 desktop. When you run the Catalyst "installer" it doesn't actually install, it just extracts the programs into a folder. you then have to navigate to the files and run the setup
T61 15.4" T9300 (2.5GHz 6MB L2) Windows 7 Professional x64 4GB Memory, NVidia Quadro NVS 140M

Amdcccle (Catalyst Control Center) not saving multiple monitor setting

I followed the wiki to the letter, but I cannot get any x window session to save the changes I make in amdcccle. All I am trying to do is get multiple monitors configured, and it works great with the catalyst control center but it never saves these settings.
I have done the following:
gksu amdcccle
gksudo amdcccle
also:
sudo aticonfig -f --initial=dual-head --screen-layout=right
and many other interations of aticonfig. The -dtop option complains that it doesnt work with RandR enabled.
I got this working a few weeks ago but can't remember what I did. If amdcccle could actually save the current configuration to file that would solve the issue but it simply will not.

Hello insco6750,
When you updated the drivers did you install over top of existing software or uninstall beforehand?
First we should try ripping everything ATI off of the system, including software, drivers and CCC. You should be able to uninstall everything through Add/remove programs.
After you remove everything reboot and let windows reinstall it's own drivers and software. You don't need CCC to do dual monitors so we can do testing without it.
Once you let windows install see if your HDMI output no longer works when you switch to the TV.
Post back your results after completing this.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Bootcamp - Catalyst Control Center - help me!

Hello, I've tried to install catalyst control center for windows 7 bootcamp, I can't seem to find the download for the actual program, I only find the drivers for it, I did find the program once, and installed it, but then I only had 2 different tabs in there, and there should be atleast 7+ with alot of options. I had close to none, in my install of the program, so I uninstalled the whole thing and now I can't seem to find it again.
I've installed the latest driver for the program now, but I cannot find the program...
And ofcourse I want to find out why I only had 2 tabs in there, when I should have had 7+
Please help me
- Anton

Is it these old drivers?
http://forums.macrumors.com/showthread.php?t=1151529
Might repost over here...
https://discussions.apple.com/community/windows_software/boot_camp

Lost catalyst control center and switchable grphics

Similar Messages

Maybe you are looking for