Lost channel settings in group properties and blending options when switching to or from 16bit

I recently noticed that Channels-settings in both Group Properties and Blending Options are lost when changing a file from 8bit to 16bit and vice versa.
Could someone please verify if the behaviour is the same on their set-up?

I moved it to the enduring forum. According to: http://feedback.photoshop.com/photoshop_family/topics/lost_channel_settings_in_group_prope rties_and_blending_options_when_switching_to_or_from_16bit
the behavior is now correct with CS6.

Similar Messages

My computer has crushed so i have to download I tunes again,and maybe all my information will be lost.but i had I cloud and last time when i used to i tunes they have asked me to do I cloud so i did,so now when i will again setup my computer and I tunes

my computer has crushed so i have to download I tunes again,and maybe all my information will be lost.but i had I cloud and last time when i used to i tunes they have asked me to do I cloud so i did,so now when i will again setup my computer and I tunes will i get all my Contacts and Inofrmations cause i had i have an account on I cloud

If you used icloud for your contacts and calendar then you should have no problem. They will all come back on the phone once you put the icloud user name and password in. Itunes does not store the contact information except in a backup file and if you were backing up using icloud you can use that backup to restore with.

When I stream music from my MacBook to speakers via airport sound stutters on and off. When I do so from iPhone all is fine. Can't seem to find any settings to change Tried to shut off firewall but settings will not let me. All software up to date.

When I stream music from my MacBook to speakers via airport sound stutters on and off. When I do so from iPhone all is fine. Can't seem to find any settings to change Tried to shut off firewall but settings will not let me. All software up to date. Thanks for any suggestions

2. not that I know of
been looking for something a bit like it got an old ipod thouch in a audio dock in the kitchen and want to give it access to all my music not just play what is synced
so far my only options is to get an app to use upnp to get the music directly from my nas
or get some app which require the computer to be running and running some program to handle it
and as far as I can tell getting access to stuff synced on the atv is a no go

Should iphone 4 receive messages when turned off and display them when switched back on

should iphone 4 receive messages when turned off and display them when switched back on

It's up to the cellular carrier, but I believe most (if not all) will enqueue the messages when your iPhone is off.
So generally speaking, a few minutes after you turn your iPhone on, your messages should display. Similarly, your voicemails would arrive.

PEAP-TLS: same settings in PEAP Properties and Smart Card & Cert Properties?

When setting up a GPO for a wireless network profile via GPMC in Windows 2008 R2, in the
Protected EAP Properties window there are check boxes for
Validate server certificate and Do not prompt user to authorize new servers or trusted certification authorities, a textbox for
Connect to these servers, and a selections list for
Trusted Root Certification Authorities.
All these configurable options show up again if you click on Configure when using
Smart Card or other certificate as the authentication method. You can set them as you wish there, different from PEAP Properties even.
My question is, which set of options takes precedence? A sane person will probably keep them the same, but why have that confusion in the interface?

Hi Roland,
All of these two settings will take effect.
PEAP is an EAP method that addresses this security issue by first creating a secure channel that is both encrypted and integrity-protected with TLS. Then, a new EAP negotiation with another EAP method occurs within the secure channel, authenticating the
network access attempt of the access client.
Therefore, the first settings is the settings of the TLS secure channel (outer layer), and the second settings is the settings of new EAP negotiation (inner layer). If we choose "Smart Card or other certificate" as the authentication method of PEAP,
there will be two TLS secure channel actually.
For detailed information, please refer to the link below,
Extensible Authentication Protocol Overview
http://technet.microsoft.com/en-us/library/bb457039.aspx
Best Regards.
Steven Lee
TechNet Community Support

Lost my settings, photos, music, addresses and want to retrieve them

I don't know what I did, but I did something bad. I am missing music from itunes, pictures from iphoto, Safari bookmarks, listings in my address book, email, and destop settings. When I go to itunes to buy music, it tells me that I don't have an account, though I have purchased music from them before and when I try to log into my sbcglobal account through Mail, it also tells me I don't have an account. The icons in my dock have changed to question marks and, except for the blessed presence of my saved documents, my system seems to reset itself. I have tried the following:
In the Finder, go to the /Users folder.
Locate the new home directory, which bears the users' short name.
Add "_new" to the new home directory's name.
Rename the old home directory to the user's correct short name.
Log out and back in with the affected user account.
But in my /Users folder there is only the home icon with my shortname. There is not a new home directory or old one, there is only the old one, without those things I listed above.
I never deleted my music or photos, etc...but I did have to force quit my finder one day and this occurred shortly afterward. I have not logged into another account unknowingly.
I did moved some things around between my Home folder and my Applications folder, which I think may have been a mistake...though I don't really know.
Can anyone tell me how to recover all my settings and files?
Powerbook G4 Mac OS X (10.3.9)

This is absurd, but I fixed my problem enough. I had moved the Library from my home folder, then it had replicated itself as a blank "library" folder and sat there hoping I wouldn't notice, which I didn't for a very long time (ahem, two months...very embarrassing).
I found my original Library where I'd put it (in a folder in my home folder where, I guess it couldn't be read) and put it back in my home folder, first renaming the phony Library "Library2". Then I removed everything from my dock and reopened it from my home folder and applications.
Now everything's pretty much back on my computer...though not exactly as it was. All the photos I had deleted are back in iphoto, and all the songs I'd deleted from itunes have been restored, which is interesting, but not depressing as it had been All my bookmarks on Safari, my email, and my address book entries are back as well. My slideshows are still missing, as are my playlists and my preferences but I am so happy to have the things back that I was afraid I lost that I really don't care. I just removed the question marks from my dock when I got everything back.
Not a perfect solution, but that's fine.
Oh, and notice that my name has changed? Whatever I did made it so that I was masquerading as another user on my own account. desperatetimes is gone, I guess.
Thanks so much for responding with help!
-desperatemeasures
Powerbook G4 Mac OS X (10.3.9)

Grouping, Pegging and Distribution (GPD) when run MRP for PS

Dear all,
As you know, MRP is a core of Planning Process. So when you run MRP for PS, SAP can't check stock in general stock and project stock at the same time. Now, my client have accept to run MRP base on project stock. But there are some problem when they give me requirement and actually situation in their company. One of them as below:
They have 3 WBS element (WBS 1, WBS 2, WBS 3) and they use the same material A. Their requirement is they want to run MRP to plan material for 3 WBS.
Solution 1: use MD51 and run MRP for Project definition and each of WBS element have respective project stock, the system will generate some of planned order for each oder reservation. After that, I will convert all of planned order to PR => PO => Good Receipt for each WBS element. When run MD04, I can see the stock for each project stock for respective WBS element.
Ok, I will talk about the limited of this solution. I suppose after complete technical for all of order reservation in WBS 1 and in project stock of WBS 1 have 3 material A not be use. But in WBS 2 is missing 3 material A. So when I run MRP again for WBS 2 by tcode MD51, the system will generate new planned order for this missing material A. This is not logic because I have enough material A for reservation in WBS 1. So I suggest my client that you should transfer material A from WBS 2 to WBS 1, they agree with me if they don't have many WBS element. But they have about 300 WBS element and they can't do transfer posting between many many WBS element. This solution 1 is not be accept.
Solution 2: I use GPD for this requirement. Firstly I will group WBS 1, WBS 2 and WBS 3 into WBS group. So use tcode MD04, I can see only WBS group and all of order reservation in each WBS 1, 2, 3 be showed on MD04 table. When I run MRP, the system will generate planned order for them. After that, I will conver all to PR => PO => Good receipt to WBS group. And in MD04 table, I can see project stock for WBS group. I begin transfer material from WBS group to each WBS 1, 2, 3. When all of order reservation in WBS 1 is technical complete, the material in WBS 1 have 3 material A not be use. And in WBS 2, I have a new order reservation and it be assigned 4 material A. At this time, project stock on WBS group is 0 but in WBS 1 is 3. But when I run MRP by tcode MD51, the system generate planned order with amount is 4. I wonder that why SAP does not check all material on all WBS element in WBS group to suggest a planned order with amount is 1. If SAP can solve this problem, my client will be accept this solution.
Hoping you support me.
Thanks, Regards
Hoai Vu

Hi Ahmed Rifaee
Thanks for your reply, I will talk about process in SAP.
So, I have 2 WBS element, that's simple because my project is have about 200 WBS element.
WBS1 have 2 order reservation for each actvity and material A0001 be use in 2 order reservation.
Order Reservation 1 needs 3 A0001
Order Reservation 2 needs 5 A0001
WBS2 have 1 order reservation for each activity and material A0001 be use in it
Order Reservation 3 needs 4 A0001
1.) If I don't group 2 WBS1 and WBS2 to one WBS group, SAP will have 2 project stock for each WBS. and when I run MRP, WBS1 and WBS2 run independent base on current project stock at each WBS. So, although project stock WBS1 is run out of A0001 while A0001 still exist A0001 in project stock WBS2, SAP still generat planned order for missing part A0001 in project stock WBS1.
2.) If I use GPD by group WBS1 and WBS2, I can solve this problem easy because they will use only one project stock for WBS group. Ok, after I good receipt A0001 into project stock, I'm sure that I have enough A0001 for 2 WBS1 and WBS2. But I can trace which reservation be ordered to delivery to them exactly. I try to use tcode MD09 to trace from Purchase order to Order reservation but I have just to trace in case PO have not been good receipted. I wonder that Pegging can help me in this case (PO have been good receipted).
Can you give me any idea for these problem
Thanks, Regards
Hoai Vu

About 1 week ago deleted email's have shown up in my inbox. I have gone into my deleted file and deleted them all forever. I am still receiving old email's in my inbox and of course when I dlete them from the inbox more go into the trash file.e

This was thourough. Trash emails going into my in box. when I delete them more come into the inbox. I deleted all the emails in the trash file. When I delete them from the inbox they go back to the trash and back & forth we go.

Sorry, not a Firefox support issue as Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] 
or this one 
[http://forums.mozillazine.org/viewforum.php?f=39]

Since upgrading to 3.6.15 some settings are not saved, and the alerts when changing between encrypted content are totally out of synch to the actually occurence

The settings dialog box cuts off the bottom ofthe box content as it seems to be having problems with font rendering.
Settings such as "Show download window" and "Ask me where to save" apparently revert to defaults rather than saving the settings.
The encrypted content alerts are out of synch. They claim to be going from encrypted to non-encrypted when neither page is encrypted. Or warn of non-encrypted content on an encrypted page when the whole page is unencrypted.
3.6.14 had none of these problems.

Update to 3.6.16 has fixed this problem.

Movie clips have all the cool filters and blending options but can't be exported as png sequence

FIX IT ADOBE.

I'm using the tools which fullfill my needs best.. so, if the PC offers you "better" results, use it.. no dogma..
delay: sure, the electronics have to digitize the video.. a process of high computation = time/delay ..
quality: a TV signal fills about a quarter of my Mac's screen (or less) .. looking at it in "fullscreen" you have to blow up.. .every pixel get 4x4 pixel = low quality...
and: you go from digital to analogue to digital .. there HAS to be a loss of quality ...
BTV offers full-screen, doesn't it..?

Why do the relative values of RGB and CMYK change when switching between Photoshop and InDesign?

I'm trying to put together a Colour Guide for my company's brand guidelines.
I initially worked from InDesign and wrote down all the H, RGB, and CMYK values that I got when I eye-dropped my original colour palette.
However when I put the same RGB values into Photoshop- I am given a (slightly) different set of CMYK numbers from those that I had originally documented in InDesign.
Why is this???

Jamie,
in Photoshop go to Edit > Color Settings and choose your parameters:
For RGB: sRGB or AdobeRGB (1998)
For CMYK: the process as recommended by your printer (person, company)
For offset printing this is here ISOCoated-v2-eci and elsewhere for instance SWOP.
For digital printing you should ask the company as well.
For Grayscale: Gray Gamma 2.2
For Spot: probably irrelevant in the moment. Dot Gain 20%
Everything as shown here:
For your application I've modified my settings a little, therefore we can see top left 'unsynchronized'.
In InDesign do practically the same, but there are no settings for Grayscale.
You'll find for any topic explanations if you move to by mouse (position the pointer over ...).
The field 'Settings' shows not 'Custom' but the file name of a configuration which had been previously saved
and then loaded (buttons top right).
Further explanations on request. It would be quite useless to explain everything now at the same time.
The colors will be wrong if the settings are not synchronized. Above they are explicitly synchronized.
Because Bridge was not used, the system considers them as 'not synchronized', which doesn't matter.
Best regards --Gernot Hoffmann

In Firefox 3.6.10 there is a save and quit option when I shut down two opentabs, how do I get this in firefox 4.0.1?

When closing Firefox version 3.6.10 with two or more tabs open I am asked 'Do you want Firefox to save your tabs for the next time it starts?' I then have the option to 'Save & Quit', 'Quit' or 'Cancel'. This does not seem to be available in Firefox 4.0.1. Is there any way I can get this option in Firefox 4.0.1?
If not it looks like I shall have to continue with 3.6.10

Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.
You can use "Firefox > History > Restore Previous Session" to get the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
* [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

HT204053 I rfor ntly changed my email address and apple id- when accessing app store from my iphone the old id (email address) still apears on the log in screen - cant change and access app store

I recently changed my email address and also my apple id to match- this is all working OK and I can access store ,apple account etc - however when I get notifications on my i phone to update apps via app store the log in screen still show my old apple id -email address which is no longer valid. when I enter my password I am denied access - there is no comand on my i phone to change the log in id for the app store ( there is for changing password or forgotten password only) does anyone have the solution for me please - many thanks, fijijohn

when I get notifications on my i phone to update apps via app store the log in screen still show my old apple id
That's because apps are forever tied permanently to the Apple ID that bought them, even if they were free. That is the only ID that can ever update them.
Unfortunately you went about this the wrong way. Rather than making a new Apple ID with the new email address, you should have just changed the name and email address associated with the old ID. Now you are kind of screwed because it's too late to use the new email on the old ID since you used it to create a new Apple ID. Apple does not transfer content from one ID to another and Apple doesn't merge IDs.
You can try to resurrect the old Apple ID with a new email address and maintain two Apple IDs, or decide which ID and it's content you wish to abandon.
How to change the name you use for your Apple ID
http://support.apple.com/kb/he40

Ibooks author inspection widget: grayed-out title and caption options when object is selected

I'm trying to add titles or captions to photos in an iBooks Author project. I select the photo, click on Inspector and Widget, then Layout. The only active option on Layout is the Accessibility Notes. Is this a bug? What am I missing?

Right.
You can create text boxes next to an image for title and caption, but otherwise, those are attributes for a widget with media.

FILE.IO.PERMISSION and SOCKET.PERMISSION when calling jdev proxy from DB

Hello everybody,
i deployed a webservide proxy (made in jdev 10.1.3.2) to an oracle 10gR2 database. Invoking this proxy works very well when calling it (as a procedure in the database) on the same machine as the DB is running.
But when trying to invoke the procedure remote on the DB-server from another pc i get 2 error messages (randomly):
java.security.AccessControlException: the Permission (java.net.SocketPermission 192.168.20.1:1521 connect,resolve) has not been granted to VECOZO. The PL/SQL to grant this is dbms_java.grant_permission( 'VECOZO', 'SYS:java.net.SocketPermission', '192.168.20.1:1521', 'connect,resolve' )
java.security.AccessControlException: the Permission (java.io.FilePermission \\WEBFS01\WEBFS01_Vecozo\Temp\Acc\MAY07 read) has not been granted to VECOZO. The PL/SQL to grant this is dbms_java.grant_permission( 'VECOZO', 'SYS:java.io.FilePermission', '\\WEBFS01\WEBFS01_Vecozo\Temp\Acc\MAY07', 'read' )
I gave this permissions in the sys schema to the vecozo schema following the example the error produces for me, but it doesnt work! When i grant socketpermissions on the port secified by the error and i run the proxy again the db comes up with the same error, only with a different port number. I'm getting crazy here. Also the granting of the file.io permission seems to have no result.
What is strange is that it all works when invoking the proxy locally (from the pc as where the db is running). I think this is because locally you dont need socketpermissions (as sockets are primarily for communication with other pc's). Furthermore i did not even grant the file permission when working locally in my testenvironmentand it all worked just fine. so i dont know why i suddenly need this permission when invoking the procedure on the productionserver from an external pc.
Can somebody plz help me with this????
greetz,
Kim

Anybody :)

Lost channel settings in group properties and blending options when switching to or from 16bit

Similar Messages

Maybe you are looking for