Lost communication with internet

I am using Windows 8 and I lost my safari and Internet Explorer connections.  The following error message keeps appearing,"There was a problem communicating with the web proxy server (HTTP) CFURL ErrorDomain:360  How can I get back connected ??  My wireless priner connection ha been lost also

You might have had a piece of malware installed to your computer that changed your proxy settings. Please try this:
Open Start
Type: "Internet Options"
Select the Internet Options Control panel item from the list. 
Go to the Connections tab.
Select the LAN Settings button
Uncheck the boxes for "Use a proxy server" and "Automatically detect settings" and then click OK out of all the windows. 
If you can get online now, then awesome. I would STRONGLY recommend at this point downloading a copy of Malwarebytes from malwarebytes.org (the free version) and doing a full scan of your computer. Make sure you opt out of the free trial seen at the end of the Malwarebytes installer.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

  • Trying to export iMovie to youtube and it says lost communication with internet. I am on the internet?

    I get a lost communication prompt when i export to youtube.
    Also for another project I get no head room?

    I've tried everything, including exporting to Quicktime with the settings suggested by youtube...nothing seems to work and I keep getting the same message:  Unable to Prepare Project for Publishing.  The project could not be prepared for publishing because an error occurred. (-50)
    The original name of the project had parenthesis and I even renamed it so now its just simply "Going Nowhere"

  • Lost communication with the scanner of my LaserJet Pro CM1415 fnw color MFP with Windows 8.1

    I have just upgraded my PC to Windows 8.1 (it came with Windows 8), and now I have "lost communication" with the scanner element of the CM1415...... The printer part is working fine!
    I have read various fixes for other printers for 8.1, but does anyone have any experience with this particular model and this particular problem?
    PS. The latest HP driver available for the CM1415 states that it is the same as the one delivered in the box....... 

    Hi RTB2014,
    Welcome to the HP Forums,  I hope you enjoy your experience!
    I understand you are unable to scan after updating the computer to Win 8.1.
    I will be happy to help you.
    Did you uninstall the printer software and reinstall the downloaded drivers?
    If you didn't then I would uninstall and reinstall the downloaded drivers.
    I have provided a URL to uninstall the printer software.
    Fully uninstall the printer in Win 8.
    You can download the newest drivers from this link. Select the operating system and click next.
    HP LaserJet Pro CM1415fnw Color Multifunction Printer Drivers.
    If you are still having issues I would download and run the Print and Scan Doctor since it might resolve the issue
    automatically.  Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows. 
    I believe that this will provide a  resolution to your issue. Thank you.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Communicating with internet explorer

    hi, I want my program to communicate with internet explorer, such as making it reload a page, change the address that sort of thing. I don't know how to make my program talk to internet explorer, can anyone help? or point me in the right direction? Thanks

    you can't do this directly... what you should look into is controlling IE through activeX components, and then see if you can tie those into Java

  • Lost communication with the printer

    I have lost communication between the computer and the printer..it was printing just fine and it quit immediately

    To have any hope of providing an answer we will need more information.  Please read this post then provide some details. What printer model? What operating system? 32 bit or 64 bit? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • We've lost communication with the server.... Errors in Production.log --

    Running version: 7.4.00065. (yeah... I know.. upgrade.. again.)This seems to be an ongoing issue. So I started digging on our end as well. seems to have something to do with max pool size... Where/how to increase it?So I'm seeing a fair number of: C:/Program Files (x86)/Spiceworks/pkg/gems/scgi-0.9.1/lib/scgi.rb:233:in `block in handle_client'
    W[15:03:01.34 2af0f4] check for ticket email url_ping: /tickets/check_email = unexpected response: Net::HTTPInternalServerError
    W[15:03:03.67 04237c] [SCGI] Handling client Errno::EPIPE: Broken pipe, at:
    C:/Program Files (x86)/Spiceworks/pkg/gems/rack-1.6.0/lib/rack/handler/scgi.rb:63:in `write'
    and these: C:/Program Files (x86)/Spiceworks/pkg/gems/scgi-0.9.1/lib/scgi.rb:233:in `block in handle_client'
    F[15:03:00.54 3a6e58] /!\ FAILSAFE /!\ 2015-07-15 15:03:00 -0400
    Status: 500 Internal Server Error
    This topic first appeared in the Spiceworks Community

    Hi,
    Do you create VMs on Hyper-V or VMWare? Based on research, possible causes could be:
    1. Files changes in the volume is very huge. So the shadow size may be big and the current shadow storage my not able to hold it. And that’s cause the shadow copy creation failure. 
    2. The I/O in D drive is heavy and make the shadow copy I/O failed. 
    3. Server is too busy to handle the request.
    4. The disk is heavily defragment.
    Please refer to the articles to troubleshoot the issue:
    Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and during times when there are high levels of input/output
    http://support.microsoft.com/kb/826936/en-us
    VSS timeouts during backup? What could contribute to that?
    https://blogs.technet.com/b/askpfeplat/archive/2012/09/12/vss-timeouts-during-backup-check-fragmentation.aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Lost communication with JH3

    Yesterday I tried to begin a capture of material for a new project. After repeated attempts to reboot, examined all connections, I decided the RS-232 cable must have gone bad. Drove 140 RT to replace it. This morning I did and found no difference.
    My next step was to upgrade the firmware on the Kona 3 board and did so. Ran Aja VTR Xchange - beautiful picture and synched time code but the one box says " NO VTR connected".....
    Decided to try running FCP and open the Log and Capture window to see what it said. Same thing. Nice picture SMPTE time code appears to be fine- "No Communication". So ...
    Now I am down to the deck controls and some hidden internal settings having changed somehow, or continued software incompatibility.
    I will say that prior to this issue - I have had splendid synchronization between all of these devices.
    FCP- 7.0.3
    Kona 3-
    Sony JH-3
    It seems that one minute FCP setting is off now. I've gone through the Audio/ Video settings and will return to all the preferences settings. But I am confused and don't get it..
    Thanks for any help solving this!

    HI Meg,
    No the JH -3 is not a switchable on/off  the RS-232 control port. I'll verify with Sony but I've gone through everything on the deck and menu. Unless it was damaged or fried the control board in some way I think I can eliminate the deck. So I am now going to go through all of the settings on the FCP panels and preferences. I must have done something when I used Soundflower to capture audio the other day...
    That is all I can think of.....
    I use a JH-3 as my play/capture deck as I am still shooting with the Sony HDW-730 - a **** fine camera. I've moved into 2k at 250 fps and 4k at up to 60 fps but for wildlife and specifically Birds... these new cameras are not ready yet. Not for what I do anyway!
    If I can figure out what I've done I'll post it up here. I've got to figure it out for the next Job... !!!
    TRB

  • Watching a video, it stops, communication with Internet stops

    I am watching a U-Tube video. I leave the video before it is done, or stop the video. Only when I do this does it seem that Firefox stops working. But maybe it is the ability to download anything from the Internet that stops. Firefox sends out the URL page request --but never get a response, and nothing further (web pages) download. Other software also can send packets but nothing ever comes back. Maybe the firewall? It is AVG Internet Security 2013. Only solution has been to re-boot the computer. I had this problem with this computer when it was an Windows XP operating system. This computer has been upgraded to Windows 7. But still having the same problem.

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Lost communication with DAQ (NI-6008) through labview

    I currently use four USB-6008 devices through labview as part of a teststand. While troubleshooting a separate issue I lost the ability to communicate with the devices but only through labview. Using other NI software I can use the analog I/O but not from my labview program. I am a chemical engineer so I've already exhausted my limited computer knowledge, any help would be greatly appreciated.

    If MAX can see the devices, and collect data thru them, then your hardware is OK.
    (Max is the Measurement and Automation Xplorer program).
    Assuming that's the case, then I would suspect a naming change.  You can rename the devices in MAX, perhaps when you didn't mean to.
    Check your ERROR outputs of the NI-DAQ calls.  That's what they're there for. Put a probe on the ERROR outputs of INIT TASK, START TASK, whatever you're using.
    The more professional programs expect those errors and handle them, if you're doing a one-off kind of thing, it's easy to think you don't need them, since it worked the first time out, but they really will give you info that you need right now.
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

  • Lost communication with scanner

    Up until yesterday, I had no problem using my networked Epson Artisan 830 printer/scanner to scan documents into Acrobat X Pro that I am running on Windows 7.  However, today I keep on getting the following message: "Error while interacting with scanner: the selected scanner was not found." Photoshop and other programs have no problem identifying the scanner. In fact, I have no problem printing a file through Acrobat either. I have done all kinds of troubleshooting to no avail and am completely stomped. I would appreciate any and all help.

    I am having the same problem. I had no problem creating a pdf through my HP scanjet 8200 and cannot find an answer anywhere.

  • Lost communication with OS4

    Hi,
    I updated my Iphone last thuesday and since them my phone call drop one time on two? It's really really frustrating to have a such amont of drop call. The communication just stop and after I heard the beep sound who indicated that the line has drop. I just have a Iphone 3GS not a Iphone 4. Does anybody have the same problem?

    Dropped calls are mostly due to your carrier's network; but can also be due to obstructing the phone's antenna. Software can also be an issue, but the carrier's network is the biggest culprit typically.

  • Logic / OS X randomly losing communication with firewire devices

    Hi
    Connected to my MBP I have a Lacie FW drive with an Apogee Duet daisy chained to this.
    During a Logic session yesterday all of a sudden I received device removal (warning) messages for these two items although they were still connected to the relevant ports!? I also had to force quit Logic following this.
    When I reconnnected the devices were recognised but things were still not right as when I tried to change the volume on the duet the system was very slow in responding.
    I was running of the battery power but this has never happened before whether connected to the mains or the battery.
    Any ideas/should I worry?
    Everything seemed fine a couple of hours later when I restarted the system but I am uneasy about the potential for this to occur during a more important session.
    Any advice greatly appreciated
    Cheers
    Sam

    Hi Sam
    I have an Imac, same operating system as you (10.5.8) and also the Duet. Also got a Lacie external hard drive. i have also encountered this problem in the last week. however, I have had this problem in both Logic 9.02 and Record so it seems it isn't just a Logic problem.
    One question - was Airport on when you lost communication with your hard drive? My was and when I turned it off the problem has not occurred again. It may have something to do with it although I'm not technically minded so I wouldn't know why.

  • MBP losing 'communication' with printer!!!!!!!!!

    Hi
    I don't seem to be having as many printing problems as many people but I do have one recurring issue.
    Often when I try and print a document nothing happens, if I check the printer icon it says the computer has lost communication with the printer.
    If I pause printing and then resume it ALWAYS prints perfectly.
    This does not happen all the time but very frequently.
    Any ideas?
    HP AIO C6180
    Install of Leopard was archive and install.
    Cheers.
    Robin

    Any suggestions would be appreciated as we have tried everything we can
    think of
    ============================================
    Hi Jeff,
    I do not know what OS you are using but is it possible that the OS
    scheduled tasks with higher priority threads start working after a periodic
    interval. In such scenario freezing of your application is possible. Try
    working with only systray, explorer in the background when your daq
    application is launched.
    Another possibility is use of old version of printer driver - some HP
    printers do not have Windows 98 drivers.
    I worked with SCXI 1200 and the Chassis and had no problems on Windows 95 -
    although I didn't acquire data for a long time.
    Hope this helps
    Good luck
    Rishipa
    [email protected]

  • Parts of string lost while communicating with Arduino.

    While communicating with arduino, the string I receive from arduino is buffered but it isn't totally read by LabVIEW
    and some information is lost, changing the data I plot. Anyone knows how to solve this problem?
    Maybe useful information:
    Arduino mega
    Baud rate: 19200
    Loop delay in Arduino: 10 ms
    The string is composed by 3 integers values concatenated like this:
    gh123ab123cd123ef
    I´m attaching the Vi.
    Thx very much!
    Paulo
    Attachments:
    Labview-LETE.vi ‏34 KB
    Labview-LETE.vi ‏34 KB

    Duplicate Post.

  • Mac suddenly stopped communicating with LAN devices, but internet access still OK.

    My iMac has suddenly stopped communicating with my wireless printer and my blu-ray player (DLNA).  Both have worked well for the past 3-4 weeks since I set up a new wireless router (Cisco EA4500). 
    Troubleshooting so far:
    Printer Function: My wife's MacAir and my iPhone both print wirelessly to the printer. [OK]
    2nd Printer connected to Mac via USB. [OK]
    Blu-Ray Player Function: System is able to reach the internet (YouTube) via the wireless router. [OK]
    Mac Function:
    Internet access. [OK]
    PRAM and SMC resets: [nothing]
    Restarted "Playback" media server software for blu-ray (DLNA) server. [nothing]
    Printer Setup: I have deleted and re-added the wireless printer and reset printer system. Mac will "see" the printer on the network, but cannot communicate with it.  [nothing]
    Attempts to use Epson Utility: Connection Error
    Router Function:
    Checked Firmware.  Most recent version prior to the "Cisco Cloud" fiasco - my router did not auto-upgrade and was not involved in the most recent firmware upgrade.
    I just cannot get the Mac to see any other hardware on the local wifi network, but the mac has no problem connecting to the internet.
    Any ideas?
    Travis

    Happened to me.Drove me crazy. Turns out, iMac can fix itself.
    Go to system preferences then network and select the connection (wireless or ethernet) that you want to use.At the bottom of the box you'll find "Assist me". click that and follow the prompts. it will likely telly you that your settings are screwed up (surprise) and ask if you want to fix them or let DHCP do it. Just let DHCP do it.

Maybe you are looking for